Search NASA⌕ Search

SEARCH · Search NASA

Results for “Equilibrium diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Defect cluster and nonequilibrium gas bubble associated growth in irradiated UMo fuels – a cluster dynamics and phase field model

Irradiation examination shows that gas bubble swelling kinetics is much faster after irradiation-induced recrystallization than that prior recrystallization in UMo fuels. It implies that gas bubbles in coarse grains and small recrystallized grains have different growth behavior. In this work, a phase-field model of gas bubble evolution integrating microstructure dependent cluster dynamics has been developed, for the first time, to study the gas bubble swelling behavior in the recrystallization zone of UMo fuels. Generation, diffusion, reaction, sink, emission and clustering of vacancies and interstitials are described by the cluster dynamics model while a phase-field model is used to describe the evolution of non-equilibrium gas bubbles including nucleation and growth. With the coupled model, the effect of defect generation rate, clustering rate, interstitial emission and sink rates on grain boundaries on the gas bubble evolution are systematically simulated. A set of model parameters (defect generation rate, clustering rate, interstitial emission and sink rates) is determined by comparing measured and simulated gas bubble swelling kinetics. The results demonstrate that interstitial clustering is one of the important physical mechanisms which results in a fast gas bubble swelling kinetics in the recrystallization zone. The developed model can also be extended to study the associated growth of defect and second phase precipitates often observed in irradiated materials.

Hu, Shenyang↗

PARKER INSTABILITY IN A SELF-GRAVITATING MAGNETIZED GAS DISK. III. NONLINEAR DEVELOPMENT OF THE PARKER INSTABILITY

Using a total variation diminishing MHD code, we have simulated the nonlinear development of the Parker instability in an isothermal magnetized gas disk that is under the influence of self-gravity. Our objective is to investigate how the Jeans and Parker instabilities compete with the disruptive tendency of the convection in the nonlinear stage of evolution and to know whether the Parker-Jeans instability can be a mechanism for the formation of the larger scale structures in the Galaxy. When the perturbation wavelengths are larger than a Jeans critical wavelength, a cooperative action between the Parker and Jeans instabilities can suppress completely the disruptive behavior of the convective instability and lead the interstellar medium gas material into large-scale structures of high density, whose masses and sizes correspond to H I superclouds rather than to giant molecular clouds. The gas disk develops the vertical filamentary structures near the dense core instead of the chaotic sheet structures that are often seen from simulations of the classical Parker instability. The low-density filaments connect the dense part to the diffuse region far from the disk central plane. The filamentary structure is similar to galactic diffuse vertical structure. When the wavelength of the given perturbations is so short that the Jeans instability may not get triggered, the self-gravitating, magnetized gas disk seems to reach an equilibrium state different from the initial one.

79 ASTRONOMY AND ASTROPHYSICS↗

NONTHERMAL RADIATION FROM COSMIC-RAY MODIFIED SHOCKS

We calculate nonthermal radiation from cosmic-ray (CR) protons and electrons accelerated at CR modified plane and spherical shocks, using time-dependent, diffusive shock acceleration (DSA) simulations that include radiative losses of CR electrons. Strong non-relativistic shocks with physical parameters relevant for young supernova remnants (SNRs) are considered in both the plane-parallel and spherically symmetric geometries, and compared at times when their dynamical and CR properties are concordant. A thermal leakage injection model and a Bohm-like diffusion coefficient are adopted. After DSA energy gains balance radiative losses, the electron spectrum at the plane shock approaches a time-asymptotic spectrum with a super-exponential cutoff above the equilibrium momentum. The postshock electron spectrum cuts off at a progressively lower momentum downstream from the shock due to the energy losses. That results in the steepening of the volume integrated electron energy spectrum by one power of the particle energy. These features evolve toward lower energies in the spherical, SNR shocks. In a CR modified shock, pion decay gamma-ray emission reveals distinct signatures of nonlinear DSA due to the concave proton momentum spectrum. Although the electron momentum spectrum has a much weaker concavity, the synchrotron spectral slope at the shock may flatten by about 0.1-0.3 between radio and X-ray bands. The slope of the volume integrated emission spectrum behaves nonlinearly around the break frequency.

79 ASTRONOMY AND ASTROPHYSICS↗

Metal thin film growth on multimetallic surfaces: From quaternary metallic glass to binary crystal

The work presented in this thesis mainly focuses on the nucleation and growth of metal thin films on multimetallic surfaces. First, we have investigated the Ag film growth on a bulk metallic glass surface. Next, we have examined the coarsening and decay of bilayer Ag islands on NiAl(110) surface. Third, we have investigated the Ag film growth on NiAl(110) surface using low-energy electron diffraction (LEED). At last, we have reported our investigation on the epitaxial growth of Ni on NiAl(110) surface. Some general conclusions can be drawn as follows. First, Ag, a bulk-crystalline material, initially forms a disordered wetting layer up to 4-5 monolayers on Zr-Ni-Cu-Al metallic glass. Above this coverage, crystalline 3D clusters grow, in parallel with the flatter regions. The cluster density increases with decreasing temperature, indicating that the conditions of island nucleation are far-from-equilibrium. Within a simple model where clusters nucleate whenever two mobile Ag adatoms meet, the temperature-dependence of cluster density yields a (reasonable) upper limit for the value of the Ag diffusion barrier on top of the Ag wetting layer of 0.32 eV. Overall, this prototypical study suggests that it is possible to grow films of a bulk-crystalline metal that adopt the amorphous character of a glassy metal substrate, if film thickness is sufficiently low. Next, the first study of coarsening and decay of bilayer islands has been presented. The system was Ag on NiAl(110) in the temperature range from 185 K to 250 K. The coarsening behavior, has some similarities to that seen in the Ag(110) homoepitaxial system studied by Morgenstern and co-workers. At 185 K and 205 K, coarsening of Ag islands follows a Smoluchowski ripening pathway. At 205 K and 250 K, the terrace diffusion limited Ostwald ripening dominants. The experimental observed temperature for the transition from SR to OR is 205 K. The SR exhibits anisotropic island diffusion and the OR exhibits 1D decay of island length while keeping the corresponding island width constant. Third, LEED indicates that, up to about 6 BL (12 ML), the Ag film adopts the (110) structure on lattice matched NiAl(110) surface, supporting the previous assignment based upon island heights measured in STM. Starting at 4.5 to 6 BL, (111) diffraction pattern is detected. This is also in agreement with previous STM study. Careful examinations of the LEED patterns reveal the slight difference in lattice constants between bulk Ag and bulk NiAl. At last, we performed STM studies of Ni deposition on NiAl(110) in the temperature range from 200 K to 400 K. Ni forms 'dense' Ni(100)-like islands on NiAl(110) with a zig-zag shaped stripe feature which is probably due to strain relief. DFT analysis provides insights into the island growth shapes, which are rationalized by the thermodynamics and kinetics of the film growth process. For thick Ni films (coverage exceeding 6 ML), a Ni(111)-like structure developed. Traditional MF theory is applied to analyze island density at 200 K. Deviation from homogeneous nucleation behavior for island size distribution and island density reveals the presence of heterogeneous nucleation mediated by the Ni antisite point defects on NiAl(110) surface.

36 MATERIALS SCIENCE↗

Isotopically labelled inorganic carbon delivered to algalcultures via bubbler bottle

This protocol describes a method for delivering labelled inorganic carbon as 13 CO 2 to algal cultures by bubbling air through a solution of H 13 CO 3 - , and then into the culture. We developed this method to deliver label to cultures grown under continuous bubbling with air, without the use of 13 CO 2 labelled gas and the necessary equipment to mix labelled gas with air at near-atmospheric levels. Bubbling precludes the more common approach of adding H 13 CO 3 - label directly to the media, because dissolved HCO 3 - is in equilibrium with atmospheric CO 2 . Thus, excess HCO 3 - added to a solution will leave the solution as CO 2 gas as it equilibrates. Bubbling rapidly accelerates this equilibration which is typically diffusion limited. The method described here takes advantage of this aspect of carbonate chemistry, and uses a solution of H 13 CO 3 - —which is less expensive and more convenient than 13 CO 2 gas—to generate a flux of 13 CO 2 that can be bubbled into a culture.

59 BASIC BIOLOGICAL SCIENCES↗

Implementation of Ion Exchange Processes for Carbon Dioxide Mineralization Using Industrial Waste Streams

Sequestration of CO 2 within stable mineral carbonates (e.g., CaCO 3 ) represents an attractive emission reduction strategy because it offers a leakage-free alternative to geological storage of CO 2 in an environmentally benign form. However, the pH of aqueous streams equilibrated with gaseous streams containing CO 2 (pH < 4) are typically lower than that which is required for carbonate precipitation (pH > 8). Traditionally, alkalinity is provided by a stoichiometric reagent (e.g., NaOH) which renders these processes environmentally hazardous and economically unfeasible. This work investigates the use of regenerable ion-exchange materials to induce alkalinity in CO 2 -saturated aqueous solutions such that the pH shift required for mineralization occurs without the need for stoichiometric reagents. Na + -H + exchange isotherms (at [H + ] = 10 −8 –10 −1 M) and rates were measured for 13X and 4A zeolites and TP-207 and TP-260 organic exchange resins in batch equilibrium and fixed-bed exchange experiments, respectively. At solutions equilibrated with CO 2 at 1.0 atm (pH = 3.9), H + exchange capacities for the materials were similar (1.7–2.4 mmol H + /g material) and resulted in pH increases from 3.9 to greater than 8.0. Multi-component mixtures using Ca 2+ and Mg 2+ cations (at 10 −3 –10 −1 M) in CO 2 -saturated water were used to probe competitive ion exchange. The presence of divalent cations in solution inhibited H + exchange, reducing capacities to as low as 0.2 mmol H + /g for both resins and zeolites. Dynamic H + exchange capacities in fixed-bed ion exchange columns were similar to equilibrium values for resins (∼1.5 mmol/g) and zeolites (∼0.8 mmol/g) using inlet solutions that were equilibrated with gaseous streams of CO 2 at 1.0 atm. However, exchange kinetics were limited by intraparticle diffusion as indicated by the increased rate parameters with increasing inlet flow rates (20–160 cm 3 min −1 ). Experimental calcite precipitation from mixing the alkaline CO 3 2− -rich water solution obtained from the ion-exchange column with a simulated liquid waste stream solution achieved thermodynamic maximum yields. The results from these studies indicate that ion exchange processes can be used as an alternative to the addition of stoichiometric bases to induce alkalinity for the precipitation of CaCO 3 , thereby opening a pathway toward sustainable and economic mineralization processes.

42 ENGINEERING↗

Fictitious phase separation in Li layered oxides driven by electro-autocatalysis

Layered oxides widely used as lithium-ion battery electrodes are designed to be cycled under conditions that avoid phase transitions. Although the desired single-phase composition ranges are well established near equilibrium, operando diffraction studies on many-particle porous electrodes have suggested phase separation during delithiation. Notably, the separation is not always observed, and never during lithiation. These anomalies have been attributed to irreversible processes during the first delithiation or reversible concentration-dependent diffusion. However, these explanations are not consistent with all experimental observations such as rate and path dependencies and particle-by-particle lithium concentration changes. Here, we show that the apparent phase separation is a dynamical artefact occurring in a many-particle system driven by autocatalytic electrochemical reactions, that is, an interfacial exchange current that increases with the extent of delithiation. We experimentally validate this population-dynamics model using the single-phase material L ix (Ni 1/3 Mn 1/3 Co 1/3 )O 2 (0.5 < x < 1) and demonstrate generality with other transition-metal compositions. Operando diffraction and nanoscale oxidation-state mapping unambiguously prove that this fictitious phase separation is a repeatable non-equilibrium effect. We quantitatively confirm the theory with multiple-datastream-driven model extraction. More generally, our study experimentally demonstrates the control of ensemble stability by electro-autocatalysis, highlighting the importance of population dynamics in battery electrodes (even non-phase-separating ones).

36 MATERIALS SCIENCE↗

Molecular mechanisms of thickness-dependent water desalination in polyamide reverse-osmosis membranes

Here, using non-equilibrium molecular simulations, we systematically elaborate the relationships among synthesis (membrane's thickness and morphology), atomic-scale transport mechanism, and separation performance (permeability and selectivity) for 3D-printed polyamide (PA) membranes. Results indicated that water diffusion, swelling ratio, water flux, and water permeance proportionally decrease with increasing membrane thickness (4.0–32.5 nm). PA membranes with different thicknesses can achieve almost 100% salt rejection over the simulation time. Importantly, water permeability exponentially decreases with increasing thickness, and 15 nm is identified as the critical membrane thickness for efficient water transport. The discontinuous water-available space spreads all over PA membranes with thicknesses greater than 5 nm, allowing water molecules to jump by way of the temporary open-and-close pores. However, the connected water-useable space exists in PA membranes with thicknesses below 5 nm, offering the continuous channels to dominate water transport. More significantly, pore distribution is more homogeneous as the thickness increases. The applied high pressures can lead to membrane compaction during reverse osmosis and the thicker membranes show a lower compression ratio. In short, these investigations provide molecular insights for effectively designing and manufacturing PA membranes for water desalination and treatment at the molecular level.

42 ENGINEERING↗

Validation of Thermal Scattering Laws for Light Water at Elevated Temperatures with Diffusion Experiments

Light water is the most important neutron moderator in many reactor applications. Thermal neutron scattering kernels for H bound in H 2 O are represented by ENDF-format thermal scattering laws (TSLs) evaluated at discrete temperatures T . Nuclear data evaluations are conventionally validated utilizing a combination of critical benchmarks and experimental cross section data. Existing public critical benchmarks may be inadequate for testing water TSLs over the full range of T of interest in reactor applications, and experimental thermal scattering cross section data for water is sparse at elevated T . In this work, MC21 is used to simulate the decay of the equilibrium thermal neutron flux in light-water spheres of several radii. The fundamental-mode time eigenvalue $\mathcal{a}$ is calculated at 22 °C and 227 °C (at saturation pressure) for each sphere using three different H-H 2 O TSLs. Fitting $\mathcal{a}$ to a polynomial function of geometric buckling allows calculation of the thermal neutron diffusion length L . Extrapolation lengths are treated as a function of the transport mean free path and geometry. Experimental L data from 25 publications at 49 temperatures (from 10 °C to 295 °C), computed by several different time-dependent and space-dependent decay methods, is used to develop an empirical fit of L vs. T . The MC21-calculated L for the TSLs tested are within ±1% of the predicted values at 22 °C and 227 °C. This validation approach, which may be repeated at arbitrary T , constitutes an integral benchmark specific to and characterizing the detailed physics of the thermal scattering kernel applied.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Isotopic exchange on solid-phase micro extraction fiber in sediment under stagnant conditions: Implications for field application of performance reference compound calibration

An overlooked issue for field application of in situ performance reference compound (PRC) calibration methods is the validity of the assumption that both the sorption of a target compound and desorption of its corresponding PRC follow the first-order kinetics with the same rate constants under stagnant conditions. In the present study, disposable polydimethylsiloxane fibers of 2 sizes (7 and 35 µm) impregnated with 8 13 C-labeled or deuterated PRCs were statically deployed into different marine sediments, from which the kinetics for sorption of the target compounds and desorption of the PRCs were characterized. Nonsymmetrical profiles were observed for exchange of the target analytes and their corresponding PRCs in sediment under stagnant conditions. Further, the hysteretic desorption of PRCs in the kinetic regime may be ascribed to the low chemical potential between the fiber and sediment porewater, which reflects the inability of water molecules to rapidly diffuse through sediment to solvate the PRCs in the aqueous layer around the fiber surface. A moderate correlation (r = 0.77 and r = 0.57, p < 0.05 for both regressions) between the PRC-calibrated equilibrium concentrations of 1,1-dichloro-2,2-bis-(chlorophenyl) ethylene (p,p'-DDE) and polychlorinated biphenyl (PCB)-153 and the lipid normalized levels in worms (Neanthes arenaceodentata) was obtained in co-exposure tests under simulating field conditions, probably resulting from slightly overestimated bioavailability because of the hysteretic desorption of PRCs and toxic effects. Environ Toxicol Chem 2016;35:1978–1985. © 2015 SETAC

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monitoring solvent dynamics and ion associations in the formation of cubic octamer polyanion in tetramethylammonium silicate solutions

NMR methods were utilized to monitor the in situ structural and dynamic changes of various species in highly alkaline tetramethylammonium (TMA) silicate solutions. Quantitative 29Si NMR, 1H, 2H, and 17O relaxation NMR, and 1H and 29Si diffusion NMR of silicates, TMA, H2O and D2O demonstrate that the growth of the cubic octamer Q38 is accompanied by reduced water mobility and increasing TMA coordination number per Q38, which reaches an equilibrium value of 4.5 at 15 °C. Temperature-dependent measurements further reveal that the increased control over speciation by TMA at lower temperatures results from the more stable ion associations via slower solvent motions.

Chen, Ying↗

Defect-based graphene nanoribbon photodetectors: A numerical study

Recently, some photodetectors based on graphene have been proposed. In all of these works, current generation was carried out by separation of photo-excited carriers using an electric field, either internal or external. In this work, a new method of producing current which is based on different transmission coefficients for electrons and holes when they travel toward any of the two contacts is proposed. To this end, a single Stone–Wales defect close to one of the two contacts was used to break the channel symmetry. In order to confirm the idea, the non-equilibrium Green's function formalism in real space in conjunction with the tight binding method was used in simulations. In addition, to clarify the results, we present a classical model in which different diffusion constants are assumed for the left going and the right going carriers. Additional simulations for different positions of the defect, different lengths of the ribbon, and different bias voltages were performed, and the results are included in this study.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The influence of counterion structure identity on conductivity, dynamical correlations, and ion transport mechanisms in polymerized ionic liquids

We used equilibrium and non-equilibrium atomistic simulations to probe the influence of anion chemistry on the true conductivity, dynamical correlations, and ion transport mechanisms in polymeric ionic liquids. An inverse correlation was found between anion self-diffusivities, ionic mobilities, and the anion size for spherical anions. While some larger asymmetric anions had higher diffusivities than smaller spherical anions, their diffusivities and mobilities did not exhibit a direct correlation to the anion volumes. Here, the conductivity and anion dynamical correlations also followed the same trends as displayed by the diffusivity and mobility of anions. All the systems we examined displayed positively correlated motion among anions, suggesting a contribution that enhances the conductivity beyond the ideal Nernst–Einstein value. Analysis of ion transport mechanisms demonstrated very similar hopping characteristics among the spherical anions despite differences in their sizes.

36 MATERIALS SCIENCE↗

Hydrodynamic description of D meson production in high-energy heavy-ion collisions *

The large values and constituent-quark-number scaling of the elliptic flow of low-p T D mesons imply that charm quarks, initially produced through hard processes, might be partially thermalized through strong interactions with quark-gluon plasma (QGP) in high-energy heavy-ion collisions. To quantify the degree of thermalization of low-p T charm quarks, we compare the D 0 meson spectra and elliptic flow from a hydrodynamic model to experimental data as well as transport model simulations. We use an effective charm chemical potential at the freeze-out temperature to account for the initial charm quark production from hard processes and assume that they are thermalized in the local comoving frame of the medium before freeze-out. D 0 mesons are sampled statistically from the freeze-out hyper-surface of the expanding QGP as described by the event-by-event (3+1)D viscous hydrodynamic model CLVisc. Both the hydrodynamic and transport models can describe the elliptic flow of D 0 mesons at P T < 3 GeV/c as measured in Au+Au collisions at $sqrts_{NN} = 200$ GeV. Though the experimental data on spectra are consistent with the hydrodynamic result at small p T ~ 1 GeV/c, they deviate from the hydrodynamic model at high transverse momentum, GeV/c. The diffusion and parton energy loss mechanisms in the transport model can describe the measured spectra reasonably well within the theoretical uncertainty. Finally, our comparative study indicates that charm quarks only approach local thermal equilibrium at small p T , even though they acquire sizable elliptic flow comparable to light-quark hadrons at both small and intermediate p T .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Enhanced Tritium Retention in LiAlO2 Pellets via Engineered Glazes: Tritium Science Project

This project investigated the impact of adding a thin (10 – 50 µm) layer of amorphous glaze to the surface of a TPBAR pellet on its retention of helium, hydrogen (as a surrogate for tritium), and water (as a surrogate for tritiated water). The hypothesis was that the glaze would significantly reduce permeation of hydrogen species with a lesser impact on hindering helium permeation. A non-crystallizing soda-lime-silicate glass, known as SCN-1, was selected for this proof-of-concept study. It was found that continuous glaze layers of the desired thickness could be applied to the pellets with two or more dip coats, depending on the targeted thickness. At 330°C, the glaze was found to have a permeability that was lower than that of the pellet by a factor of ~10 6 , implying that a thin 10 – 50 µm layer can significantly increase pellet retention of hydrogen. Meanwhile, the permeation rate of helium through the glaze was found to be ~20 times higher than that of hydrogen or water. An unanticipated outcome of the study was that unglazed pellets were measured to have hydrogen diffusivities that are a factor of ~105 greater than the diffusivity value used in the TPBAR COMSOL model to achieve observed tritium retention rates. When the higher measured diffusivity was substituted into the model and the model was run with all tritium species in the pellet in the form of T 2 O at a partial pressure of 20 Pa in equilibrium with LiOT, the resulting retention was 50% after 500 days.

36 MATERIALS SCIENCE↗

H α emission in local galaxies: star formation, time variability, and the diffuse ionized gas

ABSTRACT The nebular recombination line H α is widely used as a star formation rate (SFR) indicator in the local and high-redshift Universe. We present a detailed H α radiative transfer study of high-resolution isolated Milky-Way and Large Magellanic Cloud simulations that include radiative transfer, non-equilibrium thermochemistry, and dust evolution. We focus on the spatial morphology and temporal variability of the H α emission, and its connection to the underlying gas and star formation properties. The H α and H β radial and vertical surface brightness profiles are in excellent agreement with observations of nearby galaxies. We find that the fraction of H α emission from collisional excitation amounts to fcol ∼ 5–$10{{\ \rm per\ cent}}$, only weakly dependent on radius and vertical height, and that scattering boosts the H α luminosity by $\sim 40{{\ \rm per\ cent}}$. The dust correction via the Balmer decrement works well (intrinsic H α emission recoverable within 25 per cent), though the dust attenuation law depends on the amount of attenuation itself both on spatially resolved and integrated scales. Important for the understanding of the H α–SFR connection is the dust and helium absorption of ionizing radiation (Lyman continuum [LyC] photons), which are about $f_{\rm abs}\approx 28{{\ \rm per\ cent}}$ and $f_{\rm He}\approx 9{{\ \rm per\ cent}}$, respectively. Together with an escape fraction of $f_{\rm esc}\approx 6{{\ \rm per\ cent}}$, this reduces the available budget for hydrogen line emission by nearly half ($f_{\rm H}\approx 57{{\ \rm per\ cent}}$). We discuss the impact of the diffuse ionized gas, showing – among other things – that the extraplanar H α emission is powered by LyC photons escaping the disc. Future applications of this framework to cosmological (zoom-in) simulations will assist in the interpretation of spectroscopy of high-redshift galaxies with the upcoming James Webb Space Telescope.

79 ASTRONOMY AND ASTROPHYSICS↗

Heterodyne x-ray diffuse scattering from coherent phonons

Here, we report Fourier-transform inelastic x-ray scattering measurements of photoexcited GaAs with embedded ErAs nanoparticles. We observe temporal oscillations in the x-ray scattering intensity, which we attribute to inelastic scattering from coherent acoustic phonons. Unlike in thermal equilibrium, where inelastic x-ray scattering is proportional to the phonon occupation, we show that the scattering is proportional to the phonon amplitude for coherent states. The wavevectors of the observed phonons extend beyond the excitation wavevector. The nanoparticles break the discrete translational symmetry of the lattice, enabling the generation of large wavevector coherent phonons. Elastic scattering of x-ray photons from the nanoparticles provides a reference for heterodyne mixing, yielding signals proportional to the phonon amplitude.

36 MATERIALS SCIENCE↗

PROTON, ELECTRON, AND ION HEATING IN THE FAST SOLAR WIND FROM NONLINEAR COUPLING BETWEEN ALFVENIC AND FAST-MODE TURBULENCE

In the parts of the solar corona and solar wind that experience the fewest Coulomb collisions, the component proton, electron, and heavy ion populations are not in thermal equilibrium with one another. Observed differences in temperatures, outflow speeds, and velocity distribution anisotropies are useful constraints on proposed explanations for how the plasma is heated and accelerated. This paper presents new predictions of the rates of collisionless heating for each particle species, in which the energy input is assumed to come from magnetohydrodynamic (MHD) turbulence. We first created an empirical description of the radial evolution of Alfven, fast-mode, and slow-mode MHD waves. This model provides the total wave power in each mode as a function of distance along an expanding flux tube in the high-speed solar wind. Next, we solved a set of cascade advection-diffusion equations that give the time-steady wavenumber spectra at each distance. An approximate term for nonlinear coupling between the Alfven and fast-mode fluctuations is included. For reasonable choices of the parameters, our model contains enough energy transfer from the fast mode to the Alfven mode to excite the high-frequency ion cyclotron resonance. This resonance is efficient at heating protons and other ions in the direction perpendicular to the background magnetic field, and our model predicts heating rates for these species that agree well with both spectroscopic and in situ measurements. Nonetheless, the high-frequency waves comprise only a small part of the total Alfvenic fluctuation spectrum, which remains highly two dimensional as is observed in interplanetary space.

79 ASTRONOMY AND ASTROPHYSICS↗