Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLUID DYNAMICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

A new rotational relaxation model for use in hypersonic computational fluid dynamics

The theoretical basis for the Landau-Teller equation commonly used to model rotational nonequilibrium is reviewed. Several assumptions underlying this model are indicated to be unrealistic for rarefied hypersonic flow. A new rotational nonequilibrium model based on recent measurements up to 2000K of quantum state transition rates is presented. The new model is applied to the continuum study of normal shock wave structure using both the Burnett equations and a simplified nonlinear constitutive relation. Comparisons are made between shock wave temperature profiles generated from the new model and those generated using the Landau-Teller model. Comparisons of shock reciprocal thicknesses between experimental data for nitrogen and continuum solutions using both rotational models are made. The new rotational model agrees well with experiment up to Mach 6, and under predicts shock thickness at higher Mach numbers. The Landau-Teller model agrees well with experimental shock thickness up to Mach 3, and over predicts the thickness at higher Mach numbers. A modification to the rotational collision number in the Landau-Teller model is found to give results which agree with experimental shock thicknesses at all Mach numbers up to 11.

Chapman, Dean E.↗
NASA NTRS1988

A new multipoint thin-film diagnostic technique for fluid dynamic studies

A multielement hot-film sensor has been developed with closely-spaced elements (2.5 mm) in the streamwise direction. In addition to boundary-layer transition detection, the output of these sensors can reveal the locations of boundary-layer separation and reattachment by a 180 deg phase difference in the 0-200-Hz frequency bandwidth between sensor elements on each side of either the separation or reattachment point. This paper describes the features of multielement hot-film sensor arrays and discusses results from their application to a number of low-speed and transonic airfoil tests.

Sewall, W. G.↗
NASA NTRS1989

Spectral multi-domain for large-scale fluid dynamic simulations

A number of successful applications of a spectral collocation method extended by a multi-domain patching technique are shown. The multi-domain technique can be used to improve resolution for problems with widely disparate scales, and to reduce the ill-conditioning of the spectral operators for problems in which a large number of points are required for distributed resolution. A new nonreflecting outflow boundary treatment for unsteady transition-to-turbulence simulations is also presented, which relies on the multi-domain technique. The role of multi-domain in improving the efficiency of such calculations is discussed.

Streett, C. L.↗
NASA NTRS1990

The simulation of fluid dynamic uncertainties in the SSME turbopump

The aerodynamic uncertainties in the reusable rocket engine turbopumps due to randomness in their cryogenic environment are investigated. The probabilistic simulation of the turbopumps' aerodynamic response was accomplished using the panel method coupled with Fast Probability Integration methods. The results are presented for the probabilistic rotor blades and splitter loading and their sensitivity to specified flow coefficient and rotor preswirl variance.

Hamed, Awatef↗
NASA NTRS1989

SAGE: A 2-D self-adaptive grid evolution code and its application in computational fluid dynamics

SAGE is a user-friendly, highly efficient, two-dimensional self-adaptive grid code based on Nakahashi and Deiwert's variational principles method. Grid points are redistributed into regions of high flowfield gradients while maintaining smoothness and orthogonality of the grid. Efficiency is obtained by splitting the adaption into 2 directions and applying one-sided torsion control, thus producing a 1-D elliptic system that can be solved as a set of tridiagonal equations.

Davies, Carol B.↗
NASA NTRS1989

NASA Computational Fluid Dynamics Conference. Volume 2: Sessions 7-12

The objectives of the conference were to disseminate CFD research results to industry and university CFD researchers, to promote synergy among NASA CFD researchers, and to permit feedback from researchers outside of NASA on issues pacing the discipline of CFD. The focus of the conference was on the application of CFD technology but also included fundamental activities.

Source record↗
NASA NTRS1989

Computational fluid dynamics on a massively parallel computer

A finite difference code was implemented for the compressible Navier-Stokes equations on the Connection Machine, a massively parallel computer. The code is based on the ARC2D/ARC3D program and uses the implicit factored algorithm of Beam and Warming. The codes uses odd-even elimination to solve linear systems. Timings and computation rates are given for the code, and a comparison is made with a Cray XMP.

Jespersen, Dennis C.↗
NASA NTRS1990

Fluid dynamics and low gravity effects of chemical vapor deposition

Based on the comparison between experimental data and numerical results for the growth of GaAs from TMGa, it was shown that 3D simulations are necessary to simulate rectangular CVD reactors even when operated under subcritical (Ra) conditions. The important points found are summarized in the three attached reprints. The experimental studies of mixed convection in horizontal channels have shown three regimes of high Ra (22,220) number flows. At Re = 18.5, the rolls develop very quickly, significantly modulating the axial velocity even before it reaches the beginning of the hot plate. A few centimeters downstream, the velocities become asymmetric about the vertical centerplane and at x = 12 cm, become unsteady. These asymmetries were predicted theoretically, but experimental evidence has not been published prior to this work. At Re = 36, the axial velocity is only slightly modified at x = 0. Although the flow remains steady and symmetric about the vertical centerplane, there is a small spatial oscillation in the velocities over the length of the channel. The period of this oscillation was around 5 cm. At Re = 54, the longitudinal rolls developed smoothly over a length of 30 cm, with no asymmetries, unsteadiness, or spatial oscillations. Comparison of numerical simulations of these flows to experiments has revealed the importance and difficulty of setting proper thermal boundary conditions on the sidewalls. Calculated flows and experimentally measured flows showed very similar profiles, but at different axial locations, with the rolls developing more rapidly in the experiments. This is directly attributable to partially conducting sidewalls of the apparatus being hotter in the entrance section than the adiabatic walls of the simulations. A thorough comparison of the experimental data and numerical results for a variety of sidewall boundary conditions is in preparation.

Nyce, Thomas A.↗
NASA NTRS1989

Assessment of numerical methods for the solution of fluid dynamics equations for nonlinear resonance systems

The capability of accurate nonlinear flow analysis of resonance systems is essential in many problems, including combustion instability. Classical numerical schemes are either too diffusive or too dispersive especially for transient problems. In the last few years, significant progress has been made in the numerical methods for flows with shocks. The objective was to assess advanced shock capturing schemes on transient flows. Several numerical schemes were tested including TVD, MUSCL, ENO, FCT, and Riemann Solver Godunov type schemes. A systematic assessment was performed on scalar transport, Burgers' and gas dynamic problems. Several shock capturing schemes are compared on fast transient resonant pipe flow problems. A system of 1-D nonlinear hyperbolic gas dynamics equations is solved to predict propagation of finite amplitude waves, the wave steepening, formation, propagation, and reflection of shocks for several hundred wave cycles. It is shown that high accuracy schemes can be used for direct, exact nonlinear analysis of combustion instability problems, preserving high harmonic energy content for long periods of time.

Przekwas, A. J.↗
NASA NTRS1991

A design strategy for the use of vortex generators to manage inlet-engine distortion using computational fluid dynamics

A reduced Navier-Stokes solution technique was successfully used to design vortex generator installations for the purpose of minimizing engine face distortion by restructuring the development of secondary flow that is induced in typical 3-D curved inlet ducts. The results indicate that there exists an optimum axial location for this installation of corotating vortex generators, and within this configuration, there exists a maximum spacing between generator blades above which the engine face distortion increases rapidly. Installed vortex generator performance, as measured by engine face circumferential distortion descriptors, is sensitive to Reynolds number and thereby the generator scale, i.e., the ratio of generator blade height to local boundary layer thickness. Installations of corotating vortex generators work well in terms of minimizing engine face distortion within a limited range of generator scales. Hence, the design of vortex generator installations is a point design, and all other conditions are off design. In general, the loss levels associated with a properly designed vortex generator installation are very small; thus, they represent a very good method to manage engine face distortion. This study also showed that the vortex strength, generator scale, and secondary flow field structure have a complicated and interrelated influence over engine face distortion, over and above the influence of the initial arrangement of generators.

Anderson, Bernhard H.↗
NASA NTRS1991

A locally refined rectangular grid finite element method - Application to computational fluid dynamics and computational physics

The present FEM technique addresses both linear and nonlinear boundary value problems encountered in computational physics by handling general three-dimensional regions, boundary conditions, and material properties. The box finite elements used are defined by a Cartesian grid independent of the boundary definition, and local refinements proceed by dividing a given box element into eight subelements. Discretization employs trilinear approximations on the box elements; special element stiffness matrices are included for boxes cut by any boundary surface. Illustrative results are presented for representative aerodynamics problems involving up to 400,000 elements.

Young, David P.↗
NASA NTRS1991

Computational fluid dynamic analysis of liquid rocket combustion instability

The paper presents a computational analysis of liquid rocket combustion instability. Consideration is given to both a fully nonlinear unsteady calculation as well as a new CFD-based linearized stability analysis. An analytical solution for the linear stability problem in a constant area combustion chamber with uniform mean flow is developed to verify the numerical analyses.

Venkateswaran, Sankaran↗
NASA NTRS1991

Unsteady fluid dynamic model for propeller induced flow fields

A potential flow based three-dimensional panel method was modified to treat time dependent flow conditions in which the body's geometry may vary with time. The main objective of this effort was the study of a flow field due to a propeller rotating relative to a nonrotating body which is otherwise moving at a constant forward speed. Calculated surface pressure, thrust and torque coefficient data for a four-bladed marine propeller/body compared favorably with previously published experimental results.

Katz, Joseph↗
NASA NTRS1991

A design strategy for the use of vortex generators to manage inlet-engine distortion using computational fluid dynamics

A reduced Navier-Stokes solution technique was successfully used to design vortex generator installations for the purpose of minimizing engine face distortion by restructuring the development of secondary flow that is induced in typical 3-D curved inlet ducts. The results indicate that there exists an optimum axial location for this installation of corotating vortex generators, and within this configuration, there exists a maximum spacing between generator blades above which the engine face distortion increases rapidly. Installed vortex generator performance, as measured by engine face circumferential distortion descriptors, is sensitive to Reynolds number and thereby the generator scale, i.e., the ratio of generator blade height to local boundary layer thickness. Installations of corotating vortex generators work well in terms of minimizing engine face distortion within a limited range of generator scales. Hence, the design of vortex generator installations is a point design, and all other conditions are off design. In general, the loss levels associated with a properly designed vortex generator installation are very small; thus, they represent a very good method to manage engine face distortion. This study also showed that the vortex strength, generator scale, and secondary flow field structure have a complicated and interrelated influence over engine face distortion, over and above the influence of the initial arrangement of generators.

Anderson, Bernhard H.↗