Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fermi level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

IMPORTANCE OF FULL COULOMB INTERACTIONS FOR UNDERSTANDING THE ELECTRONIC STRUCTURE OF DELTA-Pu

The solid-state properties of most elements are now well understood on the basis of quantum physics - with few exceptions, notably the element number 94, plutonium. Plutonium has six crystalline phases at ambient pressure, some of which are separated by unusual phase transitions with large discontinuities in volume, exhibit negative thermal expansion coefficients, or form exotic low-symmetry structures. The main challenge to explain these anomalous properties is that the characteristic ingredient of actinides, the 5f electronic states, are in the cross-over regime between the localized and delocalized (itinerant) behaviour in Pu. The early part of the actinide series with the 5f states being itinerant, i.e. part of the metallic bond, culminates with Pu; starting with Am (Z = 95), the 5f states are localized, nonbonding, and resemble the 4f states in lanthanides. Both itinerant and localized regimes are well covered by existing theories, but they cannot be simply interpolated due to the importance of dynamical electron-electron correlations. Here we present accurate quantum Monte Carlo calculations achieving previously inaccessible resolution. Obtained results demonstrate that interplay of the full Coulomb interaction vertex with spin-orbital coupling is crucial for understanding the experimentally observed spectral properties of plutonium near the Fermi level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theory of Photoemission in Actinides

A theory is presented which describes the photoemission spectra of actinide compounds starting from the atomic limit of isolated actinide ions. The multiplets of the ion are calculated and an additional term is introduced to describe the interaction with the sea of conduction electrons. This leads to complex mixed-valent ground states, which describes well the rich spectrum observed for PuSe. In particular, the three-peak feature, which is often seen in Pu and Pu compounds in the vicinity of the Fermi level originates from f{sup 6} {yields} f{sup 5} emission. The theory is further applied to PuSb, PuCoGa{sub 5} and Am. (author)

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Measuring the Surface Photovoltage of a Schottky Barrier under Intense Light Conditions: Zn/p-Si(100) by Laser Time-Resolved Extreme Ultraviolet Photoelectron Spectroscopy

A metal-semiconductor heterojunction is investigated by Auger and photoelectron spectroscopy to characterize the structural and electronic properties of the metallic film and to obtain the time-resolved electronic response induced by femtosecond laser excitation of the semiconductor material. The 3.5 monolayer (ML) Zn films deposited on p-type Si(100) at liquid nitrogen temperature grows in a layer-by-layer fashion. Electronic structure measurements by extreme ultraviolet (XUV) photoelectron spectroscopy indicate that the films are metallic in nature, creating a Schottky barrier at the 3.5 ML Zn/p-Si(100) interface. Utilizing a 35 fs, 800 nm pump pulse at a pump intensity of (2.5-6) × 10 9 W/cm 2 to excite the Si and a time-delayed extreme ultraviolet pulse to probe the Zn, we observed large transient surface photovoltage shifts of 0.3-2.2 eV at carrier densities of (1.5-4.5) × 10 20 cm -3 . Three shifts are determined the Zn 3d core level, the photoemission onset, and the metallic Fermi level. The photovoltages increase with laser excitation intensity, and the Zn 3d core level exhibits the largest binding energy shifts due to pronounced screening of the core level. The large observed shifts are rationalized on the basis of the energetics of band flattening and carrier accumulation in the metallic layer of the Zn/p-Si(100) heterojunction at high carrier densities. The observed carrier recombination dynamics are biexponential in character, with similar time constants for both the Zn 3d and photoemission onset binding energy shifts. The Zn 3d core level shifts are also found to be sensitive to the electron temperature. These results show that core-level photoemission can be used to monitor valence electron dynamics, allowing separation of charge dynamics in heterojunctions and solids composed of multiple elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

How to control spin-Seebeck current in a metal-quantum dot-magnetic insulator junction

The control of the spin-Seebeck current is still a challenging task for the development of spin caloritronic devices. In this work, we construct a spin-Seebeck device by inserting a quantum dot (QD) between the metal lead and magnetic insulator. Using the slave-particle approach and noncrossing approximation, we find that the spin-Seebeck effect increases significantly when the energy level of the QD locates near the Fermi level of the metal lead due to the enhancement of spin flipping and occurrences of quantum resonance. Since this can be easily realized by applying a gate voltage in experiments, the spin-Seebeck device proposed here can also work as a thermovoltaic transistor. Moreover, the optimal correlation strength and the energy level position of the QD are discussed to maximize the spin-Seebeck current as required for applications in controllable spin caloritronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of HAT-CN Layer Thickness on Molecular Orientation and Energy-Level Alignment with ZnPc

Efficient energy-level alignment is crucial for achieving high performance in organic electronic devices. Because the electronic structure of an organic semiconductor is significantly influenced by its molecular orientation, comprehensively understanding the molecular orientation and electronic structure of the organic layer is essential. In this study, we investigated the interface between a 1,4,5,8,9,11-hexaazatriphenylene hexacarbonitrile (HAT-CN) hole injection layer and a zinc-phthalocyanine (ZnPc) p-type organic semiconductor. To determine the energy-level alignment and molecular orientation, we conducted in situ ultraviolet and X-ray photoelectron spectroscopies, as well as angle-resolved X-ray absorption spectroscopy. We found that the HAT-CN molecules were oriented relatively face-on (40°) in the thin (5 nm) layer, whereas they were oriented relatively edge-on (62°) in the thick (100 nm) layer. By contrast, ZnPc orientation was not significantly altered by the underlying HAT-CN orientation. The highest occupied molecular orbital (HOMO) level of ZnPc was closer to the Fermi level on the 100 nm thick HAT-CN layer than on the 5 nm thick HAT-CN layer because of the higher work function. Consequently, a considerably low energy gap between the lowest unoccupied molecular orbital level of HAT-CN and the HOMO level of ZnPc was formed in the 100 nm thick HAT-CN case. This may improve the hole injection ability of the anode system, which can be utilized in various electronic devices.

42 ENGINEERING↗

Interfacial chemical reaction and multiple gap state formation on three layer cathode in organic light-emitting diode: Ca/BaF{sub 2}/Alq{sub 3}

A three layer cathode is a promising stack structure for long lifetime and high efficiency in organic light-emitting diodes. The interfacial chemical reactions and their effects on electronic structures for alkaline-earth metal (Ca, Ba)/Alq{sub 3} [tris(8-hydroxyquinolinato)aluminum] and Ca/BaF{sub 2}/Alq{sub 3} are investigated using in-situ X-ray and ultraviolet photoelectron spectroscopy, as well as molecular model calculation. The BaF{sub 2} interlayer initially prevents direct contact between Alq{sub 3} and the reactive Ca metal, but it is dissociated into Ba and CaF{sub 2} by the addition of Ca. As the Ca thickness increases, the Ca penetrates the interlayer to directly participate in the reaction with the underlying Alq{sub 3}. This series of chemical reactions takes place irrespective of the BaF{sub 2} buffer layer thickness as long as the Ca overlayer thickness is sufficient. The interface reaction between the alkaline-earth metal and Alq{sub 3} generates two energetically separated gap states in a sequential manner. This phenomenon is explained by step-by-step charge transfer from the alkaline-earth metal to the lowest unoccupied molecular orbital states of Alq{sub 3}, forming new occupied states below the Fermi level.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Unintentional F doping of SrTiO3(001) etched in HF acid-structure and electronic properties

We show that the HF acid etch commonly used to prepare SrTiO3(001) for heteroepitaxial growth of complex oxides results in a non-negligible level of F doping within the terminal surface layer of TiO2. Using a combination of x-ray photoelectron spectroscopy and scanned angle x-ray photoelectron diffraction, we determine that on average ~ 13% of the O anions in the surface layer are replaced by F, but that F does not occupy O sites in deeper layers. Despite this perturbation to the surface, the Fermi level remains unpinned, and the surface-state density, which determines the amount of band bending, is driven by factors other than F doping. The presence of F at the STO surface is expected to result in lower electron mobilities at complex oxide heterojunctions involving STO substrates because of impurity scattering. Unintentional F doping can be substantially reduced by replacing the HF-etch step with a boil in deionized water, which in conjunction with an oxygen tube furnace anneal, leaves the surface flat and TiO2 terminated.

36 MATERIALS SCIENCE↗

Chemical passivation of InSb (100) substrates in aqueous solutions of sodium sulfide

The elemental composition and electronic structure of both native-oxide-covered InSb (100) substrates and substrates treated in aqueous solutions of sodium sulfide are analyzed by X-ray photoelectron spectroscopy. It is found that, as a result of treatment in a 1 M aqueous solution of Na{sub 2}S and subsequent annealing in vacuum at 150 Degree-Sign C, the surface layer consisting of complex antimony and indium oxides of nonstoichiometric composition is removed completely with the formation of a continuous layer of chemisorbed sulfur atoms coherently bound to indium atoms. According to atomic-force microscopy data, no etching of the host substrate material occurs during sulfide passivation. A shift (by 0.37 eV) of the In-Sb bulk photoemission towards higher binding energies is found, which indicates that the surface Fermi level shifts deeper into the conduction band.

36 MATERIALS SCIENCE↗

The importance of defects for carbon nanoribbon based electronics

The utilization of graphene nanoribbons for next generation nanoelectronics is commonly expected to depend on controlled synthesis that yields a low density of defects. Edge roughness and vacancies have been shown to have large impact on the performance of graphene nanoribbon transistors. In fact, we show how certain defects can be used to enhance the electronic and magnetic properties of graphene nanoribbons. We explore the properties of hybrid graphene nanoribbons with armchair and zigzag features joined by an array of pentagon-heptagon structural defects. The graphene nanoribbons display an increased density of states at the Fermi level, and half metallicity in absence of external fields.

36 MATERIALS SCIENCE↗

Temperature Coefficient of Movement of the Resonance Level of Iron in Pb{sub 1 – x} {sub – y}Sn{sub x}Fe{sub y}Te Alloys

The phase and elemental composition and the temperature dependences of the resistivity and Hall coefficient (temperature range 4.2 K ≤ T ≤ 300 K, magnetic fields B ≤ 0.07 T) are studied in Pb{sub 1 – x– y}Sn{sub x}Fe{sub y}Te alloys with varying matrix composition and iron-impurity concentration along single-crystal ingots synthesized by the Bridgman–Stockbarger method. The distributions of tin and iron along ingots are obtained. Anomalous temperature dependences of the Hall coefficient related to the Fermi-level pinning by the resonance level of iron located in the valence band of the alloys are found. The experimental results are analyzed within the model of transformation of the electronic structure, involving iron level movement with respect to the top of the valence band with increasing tin concentration and temperature. The temperature coefficient of the iron level movement with respect to the midgap is determined. Possible diagrams of transformation of the electronic structure with increasing temperature in alloys with the normal spectrum (0.06 ≤ x ≤ 0.35) are proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable terahertz structure based on graphene hyperbolic metamaterials

Photoexcited graphene can behave as the gain medium aiming to come up with the coherent radiation at low THz spectral region. However, its response is very weak because of its atomic dimensions. Herein, a different design aiming to obtain effective tunable THz amplifiers, having small dimensions and lasers with broadband operation based on active THz hyperbolic metamaterials (HMM) is demonstrated. HMMs are considered by employing multiple stacked photoexcited graphene sheets divided by dielectric spacers. Herein, we study and characterize the hyperbolic THz regime of the studied atomic active HMM. A broadband slow-wave propagation regime takes place if the graphene-based HMM system is periodically patterned. This occurs due to the hyperbolic dispersion. Doing so, reconfigurable amplification of THz waves in a broad-spectrum region is attained. This might be engineered by tuning the quasi-Fermi level of graphene. Moreover, the mechanisms leading to the increase of the frequency region of bound surface wave have been proposed in the frame of the current study.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of disorder on electronic and magnetic properties of Co{sub 2}VGa Heusler alloy

This paper presents the effect of disorder on electronic, magnetic and half-metallic properties of Co{sub 2}VGa Heusler alloy using density functional theory. Binary mixing is the most common form of atomic disorder in these compounds. We have considered three types of disorders: DO{sub 3}, A2 and B2 disorder which corresponds to X-Y, X-Z and Y-Z mixing respectively. After structural optimization, we found that A2 disorder has high formation energy and is most unlikely to occur. The half-metallic nature of the alloy is destroyed in presence of DO{sub 3} and A2 disorder. The destruction of half-metallicity is due to reconstruction of energy states. Also the loss of half-metallicity is accompanied by reversal of spin-polarization at the Fermi level. B2 disorder retains the half-metallic nature of the alloy but spin-polarization value is reduced as compared to the ordered alloy.

36 MATERIALS SCIENCE↗

Charge-exchange modes of excitation in deformed neutron-rich nuclei

Gamow-Teller (GT) mode of excitation and β-decay properties of deformed neutron-rich even-N Zr isotopes are investigated in a self-consistent Skyrme energy-density-functional approach, in which the Hartree-Fock-Bogoliubov equation is solved in the coordinate space and the proton-neutron Quasiparticle-RPA equation is solved in the quasiparticle basis. It is found that a stronger collectivity is generated for the GT giant resonance as an increase in the neutron number. Furthermore, we find that the T = 0 pairing enhances the low-lying GT strengths cooperatively with the T = 1 pairing correlation depending on the microscopic structure of the low-lying mode and the shell structure around the Fermi levels, and that the enhanced strength shortens the β-decay half-lives by at most an order of magnitude.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Near surface defects: Cause of deficit between internal and external open-circuit voltage in solar cells

The presence of interface recombination in a complex multilayered thin-film solar structure causes a disparity between the internal open-circuit voltage (V OC,in ), measured by photoluminescence, and the external open-circuit voltage (V OC,ex ) i.e. an additional V OC deficit. Higher V OC,ex value aim require a comprehensive understanding of connection between V OC deficit and interface recombination. Here, a deep near-surface defect model at the absorber/buffer interface is developed for copper indium di-selenide solar cells grown under Cu excess conditions to explain the disparity between V OC ,in and V OC,ex . The model is based on experimental analysis of admittance spectroscopy and deep-level transient spectroscopy, which show the signature of deep acceptor defect. Further, temperature-dependent current-voltage measurements confirm the presence of near surface defects as the cause of interface recombination. The numerical simulations show strong decrease in the local V OC ,in near the absorber/buffer interface leading to a V OC deficit in the device. This loss mechanism leads to interface recombination without a reduced interface bandgap or Fermi level pinning. Further, these findings demonstrate that the V OC ,in measurements alone can be inconclusive and might conceal the information on interface recombination pathways, establishing the need for complementary techniques like temperature dependent current voltage measurements to identify the cause of interface recombination in the devices.

14 SOLAR ENERGY↗

Origin of improved scintillation efficiency in (Lu,Gd){sub 3}(Ga,Al){sub 5}O{sub 12}:Ce multicomponent garnets: An X-ray absorption near edge spectroscopy study

In the recent successful improvement of scintillation efficiency in Lu{sub 3}Al{sub 5}O{sub 12}:Ce driven by Ga{sup 3+} and Gd{sup 3+} admixture, the “band-gap engineering” and energy level positioning have been considered the valid strategies so far. This study revealed that this improvement was also associated with the cerium valence instability along with the changes of chemical composition. By utilizing X-ray absorption near edge spectroscopy technique, tuning the Ce{sup 3+}/Ce{sup 4+} ratio by Ga{sup 3+} admixture was evidenced, while it was kept nearly stable with the Gd{sup 3+} admixture. Ce valence instability and Ce{sup 3+}/Ce{sup 4+} ratio in multicomponent garnets can be driven by the energy separation between 4f ground state of Ce{sup 3+} and Fermi level.

36 MATERIALS SCIENCE↗

Chemical potential shift and gap-state formation in SrTiO{sub 3−δ} revealed by photoemission spectroscopy

In this study, we report on investigations of the electronic structure of SrTiO{sub 3} annealed at temperature ranging between 550 and 840 °C in an ultrahigh vacuum. Annealing induced oxygen vacancies (O{sub vac}) impart considerable changes in the electronic structure of SrTiO{sub 3}. Using core-level photoemission spectroscopy, we have studied the chemical potential shift (Δμ) as a function of annealing temperature. The result shows that the chemical potential monotonously increases with electron doping in SrTiO{sub 3−δ}. The monotonous increase of the chemical potential rules out the existence of electronic phase separation in the sample. Using valence band photoemission, we have demonstrated the formation of a low density of states at the near Fermi level electronic spectrum of SrTiO{sub 3−δ}. The gap-states were observed by spectral weight transfer over a large energy scale of the stoichiometric band gap of SrTiO{sub 3} system leading finally to an insulator-metal transition. We have interpreted our results from the point of structural distortions induced by oxygen vacancies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗