Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flammability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

A Green, Fire–Retarding Ether Solvent for Sustainable High–Voltage Li–Ion Batteries at Standard Salt Concentration

Lithium-ion batteries (LIBs) are increasingly encouraged to enhance their environmental friendliness and safety while maintaining optimal energy density and cost-effectiveness. Although various electrolytes using greener and safer glyme solvents have been reported, the low charge voltage (usually lower than 4.0 V vs Li/Li + ) restricts the energy density of LIBs. Herein, tetraglyme, a less-toxic, non-volatile, and non-flammable ether solvent, is exploited to build safer and greener LIBs. It is demonstrated that ether electrolytes, at a standard salt concentration (1 m), can be reversibly cycled to 4.5 V vs Li/Li + . Anchored with Boron-rich cathode-electrolyte interphase (CEI) and mitigated current collector corrosion, the LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathode delivers competitive cyclability versus commercial carbonate electrolytes when charged to 4.5 V. Synchrotron spectroscopic and imaging analyses show that the tetraglyme electrolyte can sufficiently suppress the overcharge behavior associated with the high-voltage electrolyte decomposition, which is advantageous over previously reported glyme electrolytes. The new electrolyte also enables minimal transition metal dissolution and deposition. NMC811||hard carbon full cell delivers excellent cycling stability at C/3 with a high average Coulombic efficiency of 99.77%. In conclusion, this work reports an oxidation-resilient tetraglyme electrolyte with record-high 4.5 V stability and enlightens further applications of glyme solvents for sustainable LIBs by designing Boron-rich interphases.

36 MATERIALS SCIENCE↗

Flame retardant biogenic building insulation materials from hemp fiber

Biogenic thermal insulation materials are in high demand because of its carbon-sequestration nature. However, high flammability, moisture condensation, and relatively high thermal conductivity of biogenic material are major concerns for sustainable building applications. In this study, we report the fire-retardant cellulose xerogel insulation nanocomposites derived from hemp fiber recycling and silica xerogel, in which the boric acid treatment improves its fire retardancy. The as-prepared materials show a low thermal conductivity of 31.3 mW/m K, high flexural modulus of 665 MPa, hydrophobicity with the water contact angle of 115°, and fire retardancy with 30% weight loss over a period of burning time 10 min. Overall, this work provides an effective method for the synthesis of fire-retardant biogenic thermal insulation materials and shows a promising way for next-generation bio-based insulation materials.

36 MATERIALS SCIENCE↗

Binder Effects on Processing, Mechanical Properties, and Performance of Thin Sulfide Solid‐State Electrolytes

All‐solid‐state batteries (ASSBs) offer enhanced safety and energy density compared to conventional lithium‐ion batteries by replacing flammable liquid electrolytes with solid‐state electrolytes (SSEs). Among SSEs, sulfide‐based electrolytes exhibit high ionic conductivity and mechanical deformability, making them promising candidates for next‐generation energy storage. However, their practical implementation is hindered by interfacial instability, mechanical brittleness, and challenges in fabricating ultrathin electrolyte membranes (<30 μm) with robust mechanical integrity. Here, this study systematically examines the influence of polymeric binders—polyisobutylene, hydrogenated nitrile butadiene rubber, and styrene–ethylene–butylene–styrene (SEBS)—on the structural, mechanical, and electrochemical performance of thin sulfide SSE membranes. Key findings reveal that SEBS enables the fabrication of ultrathin, uniform membranes, while binder elasticity significantly affects structural stability during cycling. Operando stack pressure measurements indicate that binder properties directly influence adhesion force for LPSCl particles, influencing their stabilizing cycling period. These results underscore the critical role of polymer binders beyond mechanical reinforcement, positioning them as essential design variables in sulfide SSE engineering. By linking binder chemistry to processability and electrochemical performance, this study provides insights into optimizing sulfide SSEs, advancing their commercial viability in ASSBs.

argyrodite sulfide electrolyte↗

Low‐Temperature and High‐Rate Rechargeable Aluminum Batteries Enabled by Ternary Eutectic Electrolytes

Abstract Rechargeable aluminum batteries (RABs) have garnered extensive scientific attention as a promising alternative chemistry due to the inherent advantages associated with aluminum (Al) metal anodes, including their high theoretical capacities, cost‐effectiveness, environmental friendliness, and inherent non‐flammable properties. Nonetheless, the practical energy density of RABs is constrained by the electrolytes that support lower operational voltage windows. Herein, we report a ternary eutectic electrolyte composed of 1‐ethyl‐3‐methylimidazolium chloride ([C 2 C 1 im]Cl):1‐butyl‐3‐methylimidazolium chloride ([C 4 C 1 im]Cl):aluminum chloride (AlCl 3 ) for the application of RABs. The electrolyte exhibits a high operational potential window (~3 V vs. Al/Al 3+ on SS 316) and high ionic conductivity (~8.3 mS cm −1 ) while exhibiting only a low temperature glass transition at −65 °C suitable for all‐climate conditions. Al||graphene nanoplatelets cell delivers a high capacity of ~117 mAh/g, and ~43 mAh/g at a very high current densities of 1 A/g and 5 A/g, respectively. The cells render a reversible capacity of 20 mAh/g at −20 °C and 17 mAh/g at −40 °C, indicating their suitability for operation under extreme environmental conditions. We comprehensively evaluated the design and optimization of carbon paper‐based battery systems. The ternary eutectic electrolyte demonstrates exceptional electrochemical performance, thus signifying its substantial potential for utilization in high‐performance energy storage systems in all climates.

Vadthya, Raju↗

Revisiting underground gas storage as a direct analogue for geologic carbon sequestration: Editorial

Ever since the early 2000s, I have thought underground (natural) gas storage (UGS) to be a close industrial analogue for geologic carbon sequestration (GCS) as, for example, indicated in an early report by Benson et al.1 Both UGS and GCS use wells to inject and store buoyant gas deep underground in the pore space of rock. Both UGS and GCS can use depleted hydrocarbon reservoirs or saline aquifers as storage complexes. Of course there exist some differences between the two gases, e.g., the greater solubility of CO 2 in water relative to CH 4 (the primary natural gas component), greater density of super-critical CO 2 relative to CH 4 , and the flammability and buoyancy of CH 4 if leaked into the atmosphere. Furthermore, in UGS the natural gas is injected and withdrawn over various time scales rather than constantly injected as in GCS, creating differences in the needs for facility surface infrastructure, and strain on wells, wellheads, and surface flow lines. But overall, UGS seems to serve as a useful example of how large volumes of gas can be handled and stored underground.

58 GEOSCIENCES↗

A chemical kinetic mechanism for combustion and flame propagation of CH 2 F 2 /O 2 /N 2 mixtures

Here in this work, we compiled and evaluated rate expressions for reactions relevant to the decomposition and combustion of CH 2 F 2 (difluoromethane, refrigerant R-32) in CH 2 F 2 /O 2 /N 2 flames. The recommended values have been used in premixed flame calculations, reported elsewhere, to model experimentally derived burning velocities determined using a constant volume spherical flame method. In this work, we also provide a detailed description of the reaction pathways for decomposition and combustion of CH 2 F 2 . This work is part of a larger effort at NIST to characterize and predict the flammability of new refrigerant working fluids and their blends for consideration as replacements of current refrigerants with high global warming potentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental Determination of Combustion Characteristics for Commercial Biodiesel and 0# Diesel

In this project, we have experimentally studied the combustion characteristics of commercial refined biodiesel and 0# diesel. Combustion of these two types of flammable liquids was carried out in a calorimeter to measure their heat release rate. The results showed that the heat release rate, which is one of the most significant properties in studying combustion, varies significantly depending on the samples and the dimensions of the circular burner. With the aim of evaluating the combustion characteristics, we also determined and analyzed other key properties of the fuels such as flash point, total heat release, and mass loss rate, which reflect the fire hazard. The results provide an experimental basis for developing fire protection measures during use, storage, and distribution of biodiesel. The flash point of biodiesel is higher than for 0# diesel, while the heat release rate, the experimental total heat release, the average combustion temperature and the radiation of biodiesel are lower than for 0# diesel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Novel Rigid PU Foam Based on Modified Used Palm Oil as Sound Absorbing Material

Novel bio-polyol was successfully synthesized from used palm oil (UPO) and was further tested for preparing rigid polyurethane (PU) foams. In this work, the modified used palm oil (MUPO) was synthesized in a single step process, by epoxidation together with ring opening reactions. The reagent ratios and reaction time for MUPO synthesis were also studied. The chemical structure of MUPO was confirmed by {sup 1}H-NMR spectroscopy and FTIR. The hydroxyl value of MUPO increased with reaction time and depended also on reagent ratio. The GPC trace of MUPO showed a bimodal distribution and the molecular weight slightly decreased with OH value. New rigid PU foams were prepared from MUPO. The foam cell size and compressive strength at 10% strain increased with OH value. All the rigid PU foams had excellent sound absorption coefficients. The lowest OH value (OHV = 100 mg KOH/g) provided sound absorption from 2200 Hz. In addition, the flammability of PU foams was improved by adding 30% wt of triphosphate (TPP) as flame retardant. The investigations showed that a bio-polyol based on UPO was suitable for preparing rigid PU foams that could serve as alternative sound absorbing materials. Graphical Abstract: .

36 MATERIALS SCIENCE↗

Flame-retardant cellulose-aerogel composite from agriculture waste for building insulation

Bio-based thermal insulation materials are in high demand due to their availability, reproducibility, and carbon-sequestration nature. However, high flammability, moisture condensation, and high thermal conductivity of biogenic material are major concerns for sustainable building applications. In this study, we report the fire-retardant cellulose aerogel insulation nanocomposites derived from wheat straw and silica aerogel, in which sodium bicarbonate improves its fire retardancy. We combined blended straw fibers and hammermilled straw fibers to create a structural hierarchy composite. The blended straw, with its longer and thicker size, served as reinforcement, while the hammermilled straw fibers acted as filler. This hierarchical structure was further integrated with aerogel for applications in green buildings. The as-prepared materials show a low thermal conductivity of 24.1 mW/m.K, high flexural modulus of 736 MPa, hydrophobicity with a water contact angle of 110.42°, and excellent fire retardancy. Altogether, this work provides an effective method for the synthesis of fire-retardant biogenic thermal insulation materials and shows a promising way for next-generation bio-based insulation materials.

36 MATERIALS SCIENCE↗

Enhanced pool boiling heat transfer with metal foam tubes in inline tube bundle configuration

Flooded evaporators, commonly known as shell-and-tube heat exchangers, are widely used in large-scale industrial refrigeration and air-conditioning systems due to their high pool boiling heat transfer efficiency. However, their bulky configuration requires a large refrigerant inventory, which poses safety challenges—particularly when employing next-generation A2L refrigerants that are mildly flammable. Here, to address this issue, the development of compact heat exchangers with enhanced heat transfer performance is essential. In this study, a novel metal foam tube design is proposed to augment pool boiling heat transfer. Experiments were conducted at a saturation temperature of 20 °C and across a heat flux range of 7–60 kW m −2 . The tests were conducted for both smooth and metal foam tubes with an inline tube bundle configuration and for a pitch–to–diameter (P/D) ratios of 1.3 and 1.5. Pool boiling performance was evaluated for next-generation hydrofluoroolefin (HFO) refrigerants, R1234yf and R1234ze(E), with R134a serving as the baseline fluid. The results indicate that the heat transfer coefficient (HTC) of R1234yf is comparable to R134a, while R1234ze(E) shows slightly lower performance. Importantly, the metal foam tubes achieved up to a 217% enhancement in HTC compared to smooth tubes.

Metal foam tubes↗

A Non-Aqueous Reduction Process for Purifying 153Gd Produced in Natural Europium Targets

Gadolinium-153 is a low-energy gamma-emitter used in nuclear medicine imaging quality assurance. Produced in nuclear reactors using natural Eu2O3 targets, 153Gd is radiochemically separated from europium isotopes by europium reduction. However, conventional aqueous europium reduction produces hydrogen gas, a flammability hazard in radiological hot cells. We altered the traditional reduction method, using methanol as the process solvent to nearly eliminate hydrogen gas production. This new, non-aqueous reduction process demonstrates greater than 98% europium removal and gadolinium yields of 90%.

Gd-153↗

Localized High-Concentration Sulfone Electrolytes for High-Efficiency Lithium-Metal Batteries

To enable next-generation high-energy-density lithium (Li) metal batteries (LMBs), an electrolyte that has simultaneous high Li metal Coulombic efficiency (CE) and high anodic stability on cathodes is of significant importance. Sulfones are known for their high dielectric constants, low flammability and in particular strong resistance against oxidation, but their application in LMBs is restricted due to their poor compatibility with Li metal anode. Uncontrolled Li plating in sulfones results in poor Li CE and induces catastrophic battery failure, and their high viscosity and poor wettability towards electrodes and separators introduce serious issues for the practical applications. Here, we demonstrate that stable Li plating/stripping cycles can be achieved in concentrated sulfone-based electrolytes at a high CE over 98%, where nodule instead of dendritic Li deposition occurs. Furthermore, the viscosity and wettability issues of sulfones could be resolved by the addition of a fluorinated ether, which is a poor solvating agent for ionic species but well miscible with sulfones at microscopic scale. This localized high-concentration electrolyte (LHCE) not only provides further improvement in Li CE (to 98.8%), but also remains anodically stable with high voltage cathode and enables LMBs to operate in a wide temperature range. As a result, significantly improved cycling performance of LMBs using sulfone-based LHCE has been realized.

sulfone, concentrated electrolyte, localized high ↗

Turbulent flame speeds in ducts and the deflagration/detonation transition

A methodology is proposed for determining whether a deflagration-to-detonation transition (DDT) might occur for flame propagation along a duct with baffles, closed at the ignition end. A flammable mixture can attain a maximum turbulent burning velocity. If this is sufficiently high, a strong shock is formed ahead of the flame. It is assumed that this maximum burning velocity is soon attained and on the basis of previous studies, this value can be obtained for the given conditions. The increase in temperature and pressure of the reactants, due to the shock, further increases the maximum turbulent burning velocity. The gas velocity ahead of the flame is linked to one-dimensional shock wave equations in a numerical analysis. The predicted duct flame speeds with the appropriate maximum turbulent burning velocities are in good agreement with those measured in the slow and fast flame regimes of a range of CH{sub 4}-air and H{sub 2}-air mixtures. DDTs are possible if autoignition of the reactants occurs in the time available, and if the projected flame speed approaches the Chapman-Jouguet velocity at the same temperature and pressure. Prediction of the first condition requires values of the autoignition delay time of the mixture at the shocked temperatures and pressures. Prediction of the second requires values of the laminar burning velocity and Markstein number. With the appropriate values of these parameters, it is shown numerically that there is no DDT with CH{sub 4}-air. With H{sub 2}-air, the onset of DDT occurs close to the values of equivalence ratio at which it has been observed experimentally. The effects of different duct sizes also are predicted, although details of the DDT cannot be predicted. Extension of the study to a wider range of fuels requires more data on their laminar burning velocities and Markstein numbers at higher temperatures and pressures and on autoignition delay times at lower temperatures and pressures. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ignition of turbulent swirling n-heptane spray flames using single and multiple sparks

This paper examines ignition processes of an n-heptane spray in a flow typical of a liquid-fuelled burner. The spray is created by a hollow-cone pressure atomiser placed in the centre of a bluff body, around which swirling air induces a strong recirculation zone. Ignition was achieved by single small sparks of short duration (2 mm; 0.5 ms), located at various places inside the flow so as to identify the most ignitable regions, or larger sparks of longer duration (5 mm; 8 ms) repeated at 100 Hz, located close to the combustion chamber enclosure so as to mimic the placement and characteristics of a gas turbine combustor surface igniter. The air and droplet velocities, the droplet diameter, and the total (i.e. liquid plus vapour) equivalence ratio were measured in inert flow by phase Doppler anemometry and sampling respectively. Fast camera imaging suggested that successful ignition events were associated with flamelets that propagated back towards the spray nozzle. Measurements of ignition probability with the single spark showed that localised ignition inside the spray is more likely to result in successful flame establishment when the spark is located in a region of negative velocity, relatively small droplet Sauter mean diameter, and mean equivalence ratio within the flammability limits. Ignition with the single spark was not possible at the location where the multiple spark experiments were performed. For those, the multiple spark sequence lasted approximately 1 to 5 s. It was found that a long spark sequence increases the ignition efficiency, which reached a maximum of 100% at the axial distance where the recirculation zone had maximum width. Ignition was not feasible with the spark downstream of about two burner diameters. Visualisation showed that small flame kernels emanate very often from the spark, which can be stretched as far as 20 mm from the electrodes by the turbulent velocity fluctuations. These kernels survive very little time. Successful overall ignition occurs at a random time from the spark initiation and, as in the case of the single spark, success is associated with kernels that move without getting extinguished towards the bluff body. The results demonstrate that the energy deposited by multiple sparks and spark stretching in a turbulent flow can have a spatially far-reaching effect to initiate combustion. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulations of laminar flame propagation in droplet mists

In order to clarify the conditions conducive to propagation of premixed flames in quiescent sprays, a one-dimensional code with detailed chemistry and transport was used. n-Heptane and n-decane, distinguished by their volatility, were studied under atmospheric and low temperature, low pressure conditions. The effects of initial droplet diameter, overall equivalence ratio {phi}{sub 0} and droplet residence time before reaching the flame front were examined. Increasing the residence time had an effect only for n-heptane, with virtually no evaporation occurring before the flame front for n-decane. The trends were only marginally correlated with the local gaseous equivalence ratio {phi}{sub eff} at the location of maximum heat release rate. {phi}{sub eff} could be as low as 0.4 (beyond the lean flammability limit), but the flame speed could still be 40% of the gaseous stoichiometric flame speed S{sub L,0}. For n-heptane, {phi}{sub eff} increased towards {phi}{sub 0} with smaller droplets while high flame speeds occurred when {phi}{sub eff} was near 1. This implied that the highest flame speed was achieved with small droplets for {phi}{sub 0} {<=} 1 and with relatively large droplets for {phi}{sub 0} > 1. In the latter case, the oxidiser was completely consumed in the reaction zone and droplets finished evaporating behind the flame where the fuel was pyrolysed. The resulting small species, mainly C{sub 2}H{sub 2}, C{sub 2}H{sub 4} and H{sub 2}, diffused back to the oxidation zone and enhanced the reaction rate there. Ultimately, this could result in flame speeds higher than S{sub L,0} even with {phi}{sub 0} = 4. For n-decane, the same trends were followed but smaller droplets were needed to reach the same {phi}{sub eff} due to the slow evaporation rate. Under low pressure and low temperature, the effects of pressure and temperature on {phi}{sub eff} and the flame speed were competitive and resulted in values close to the ones at atmospheric conditions. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Thermoacoustic limit cycles in a premixed laboratory combustor with open and choked exits

This paper presents an experimental and theoretical investigation of the response of a turbulent premixed flame during thermoacoustic limit cycle in a simple, laboratory combustor. The flame dynamics are examined using high-speed pressure transducers and CH* chemiluminescence. The so-called 'interaction index' and time delay between the acoustic velocity fluctuations at the flame holder and the flame's overall heat release fluctuations are then determined. A wide range of operating conditions, traversing the combustor's flammability limits in Mach number and equivalence ratio, are studied for four different combustor exits, including one where the exit is choked. In all cases the time delay correlates very well with the amplitude of the velocity fluctuations. There is also some correlation between the interaction index and these velocity fluctuations, but this is less clear. These results suggest a novel, nonlinear flame model, derived entirely empirically. An existing low-order thermoacoustic model is then extended to include convection and dispersion of entropy fluctuations downstream of the flame, enabling the effect of the choked nozzle to be examined. The novel nonlinear flame model is integrated into the low-order thermoacoustic model, and used to investigate the experimentally observed thermoacoustic limit cycles. The model correctly simulates the observed switch to a low-frequency, entropically driven instability observed when the combustor exit is choked. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionization and chemiluminescence during the progressive aeration of methane flames

Saturation currents and chemiluminescence, especially at the CH{sup *} and C{sub 2}{sup *} wavelengths, are measured for a range of small, laminar methane flames during progressive addition of air, with the principal objective of distinguishing between pure diffusion flames, premixed flames of compositions falling between the upper and lower flammability limits, and the broad range of aerated flames lying in between these regimes. Flame areas defined by the loci of maximum luminosity and by schlieren contours were recorded, so that saturation current densities, CH{sup *} and C{sub 2}{sup *} emission per unit flame area, as well as burning velocities could be deduced. For admixtures of less than 70 vol.%, air appears to act, surprisingly, as an inert diluent as regards saturation currents, so that saturation currents are essentially proportional to fuel flow alone. Much the same applies to chemiluminescence. However, schlieren contours, which were recorded both to provide a basis for burning velocity measurements and to explore density changes in the reactants, indicated the presence of a burner - stabilised propagating reaction zone ahead of the luminous flame surface starting at around 50 vol.% and possibly even at lower air admixtures. This evidence of a steep change in refractive index is indicative of a premixed reaction zone involving the added oxygen, which however generates no chemi-ionization and emits no light. Even photographing the flame by radiation emitted at the CH{sup *} and C{sub 2}{sup *} wavelengths shows no sign of its existence. Its burning velocity is about 10 cm/s, when stabilized by the surrounding diffusion flame. The most plausible rationale for these observations is the formation of syngas by the partial oxidation of methane. The subsequent burning of CO and H{sub 2} is known to occur without chemi-ionization or appreciable light emission. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental study on premixed CH{sub 4}/air mixture combustion in micro Swiss-roll combustors

Excess enthalpy combustion is a promising approach to stabilize flame in micro-combustors. Using a Swiss-roll combustor configuration, excess enthalpy combustion can be conveniently achieved. In this work, three types of Swiss-roll combustors with double spiral-shaped channels were designed and fabricated. The combustors were tested using methane/air mixtures of various equivalence ratios. Both temperature distributions and extinction limits were determined for each combustor configuration at different methane mass flow rates. Results indicate that the Swiss-roll combustors developed in the current study greatly enhance combustion stability in center regions of the combustors. At the same time, excess enthalpy combustors of the Swiss-roll configuration significantly extend the extinction limits of methane/air mixtures. In addition, the effects of combustor configurations and thermal insulation arrangements on temperature distributions and extinction limits were evaluated. With heat losses to the environment being significant, the use of thermal insulations further enhances the flame stability in center regions of the Swiss-roll combustors and extends flammable ranges. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗