Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hourly data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

SEARCHING FOR SUB-KILOMETER TRANS-NEPTUNIAN OBJECTS USING PAN-STARRS VIDEO MODE LIGHT CURVES: PRELIMINARY STUDY AND EVALUATION USING ENGINEERING DATA

We present a pre-survey study of using the Panoramic Survey Telescope and Rapid Response System (Pan-STARRS) high sampling rate video mode guide star images to search for trans-Neptunian objects (TNOs). Guide stars are primarily used by Pan-STARRS to compensate for image motion and hence improve the point-spread function. With suitable selection of the guide stars within the Pan-STARRS 7 deg{sup 2} field of view, the light curves of these guide stars can also be used to search for occultations by TNOs. The best target stars for this purpose are stars with high signal-to-noise ratio (S/N) and small angular size. In order to do this, we compiled a catalog using the S/N calculated from stars with m{sub V} < 13 mag in the Tycho2 catalog, then cross matched these stars with the Two Micron All Sky Survey catalog, and estimated their angular sizes from (V - K) color. We also outlined a new detection method based on matched filter that is optimized to search for diffraction patterns in the light curves due to occultation by sub-kilometer TNOs. A detection threshold is set to compromise between real detections and false positives. Depending on the theoretical size distribution model used, we expect to find up to a hundred events during the three-year lifetime of the Pan-STARRS-1 project. The high sampling (30 Hz) of the project facilitates detections of small objects (as small as 400 m), which are numerous according to power-law size distribution, and thus allows us to verify various models and further constrain our understanding of the structure in the outer reach of the solar system. We have tested the detection algorithm and the pipeline on a set of engineering data (taken at 10 Hz instead of 30 Hz). No events were found within the engineering data, which is consistent with the small size of the data set and the theoretical models. Meanwhile, with a total of {approx}22 star-hours video mode data (|{beta}| < 10{sup 0}), we are able to set an upper limit of N(>0.5 km) {approx} 2.47 x 10{sup 10} deg{sup -2} at 95% confidence limit.

79 ASTRONOMY AND ASTROPHYSICS↗

Impact of a Merged Precipitation Data on Global Soil Moisture Variability

Accurate soil moisture information has proved to be important to climate simulations and climate and weather forecasts. However, many difficulties exist that limit our understanding of soil moisture distribution and variability. One of them is the lack of accurate precipitation with appropriate spatial and temporal resolution. Precipitation as an input forcing to the land surface greatly influences soil moisture characteristics and variability. To improve precipitation data quality, an algorithm has been developed to generate a spatially and temporally continuous 3-hourly global precipitation data for the period of 1987 to present. This precipitation product is a combination of the precipitation from Special Sensor Microwave Imager (SSMI) with the Goddard Earth Observing System-1 Data Assimilation System (GEOS-1 DAS) employing a Physical-space Statistical Analysis System (PSAS). In this study we investigate the impact of this merged/analyzed precipitation data on the global soil moisture variability using an Off-line Land-surface GEOS Assimilation (OLGA) system. Two OLGA integrations starting from 1987 to 1993 are performed forced with the analyzed and GEOS-1 DAS precipitation respectively. We examine the spatial and temporal characteristics of soil moisture variability in response to the analyzed precipitation. The influence of this merged precipitation on the soil moisture variability and regional hydrological budget is estimated throughout the comparison with the results forced with the GEOS-1 DAS precipitation only. In the OLGA the sut@-grid scale horizontal heterogeneity is explicitly represented on the tile space. This provides a means to assess the role of the surface moisture heterogeneity in the interaction with the surface atmosphere and surface hydrological budget, and to validate OLGA results at tile space with in situ observation. ABRACOS (Anglo-Brazilian Amazonian Climate Observation Study), FIFE (First ISLSCP Field Experiment) I and HAPEX data will be used in the validation.

Yang, Runhua↗

Shuttle Laser Altimeter

The Shuttle Laser Altimeter (SLA) is a Hitchhiker experiment that has flown twice; first on STS-72 in January 1996 and then on STS-85 in August 1997. Both missions produced successful laser altimetry and surface lidar data products from approximately 80 hours per mission of SLA data operations. A total of four Shuttle missions are planned for the SLA series. This paper documents SLA mission results and explains SLA pathfinder accomplishments at the mid-point in this series of Hitchhiker missions. The overall objective of the SLA mission series is the transition of the Goddard Space Flight Center airborne laser altimeter and lidar technology to low Earth orbit as a pathfinder for NASA operational space-based laser remote sensing devices. Future laser altimeter sensors will utilize systems and approaches being tested with SLA, including the Multi-Beam Laser Altimeter (MBLA) and the Geoscience Laser Altimeter System (GLAS). MBLA is the land and vegetation laser sensor for the NASA Earth System Sciences Pathfinder Vegetation Canopy Lidar (VCL) Mission, and GLAS is the Earth Observing System facility instrument on the Ice, Cloud, and Land Elevation Satellite (ICESat). The Mars Orbiting Laser Altimeter, now well into a multi-year mapping mission at the red planet, is also directly benefiting from SLA data analysis methods, just as SLA benefited from MOLA spare parts and instrument technology experience [5] during SLA construction in the early 1990s.

Bufton, Jack L.↗

MSL MMRTG Power Modeling for Lifetime Performance Predictions

The Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) has been providing power to the Mars Science Laboratory (MSL) rover, Curiosity, for surface operations since 2012. The Jet Propulsion Laboratory (JPL) has employed the Life Performance Prediction Model (LPPM) to generate predictions and outputs based upon flight data from the rover and experimental data from the thermoelectric (TE) couples. In order to make these predictions, LPPM requires various spacecraft inputs relevant to RTG performance such as fin root temperature, load voltage, general purpose heat source (GPHS) inventory, etc., combined with couple data such as thermoelectric properties, interface degradation, and sublimation properties. With tens of thousands of hours of flight data to date, LPPM can not only track performance to date, but also make predictions on the power output of the MMRTG through the 17-year end-of-design-life (EODL). These predictions are useful for mission planners and surface operators who rely on the MMRTG for power in order to perform the critical science necessary during the mission. This paper will showcase the power data extracted from the flight electronics, comparing it to the predictions and outputs generated from LPPM.

Pinkowski, Stanley↗

Analysis of Random Forest Modeling Strategies for Multi-Step Wind Speed Forecasting

Although the random forest (RF) model is a powerful machine learning tool that has been utilized in many wind speed/power forecasting studies, there has been no consensus on optimal RF modeling strategies. This study investigates three basic questions which aim to assist in the discernment and quantification of the effects of individual model properties, namely: (1) using a standalone RF model versus using RF as a correction mechanism for the persistence approach, (2) utilizing a recursive versus direct multi-step forecasting strategy, and (3) training data availability on model forecasting accuracy from one to six hours ahead. These questions are investigated utilizing data from the FINO1 offshore platform and Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) C1 site, and testing results are compared to the persistence method. At FINO1, due to the presence of multiple wind farms and high inter-annual variability, RF is more effective as an error-correction mechanism for the persistence approach. The direct forecasting strategy is seen to slightly outperform the recursive strategy, specifically for forecasts three or more steps ahead. Finally, increased data availability (up to ~8 equivalent years of hourly training data) appears to continually improve forecasting accuracy, although changing environmental flow patterns have the potential to negate such improvement. We hope that the findings of this study will assist future researchers and industry professionals to construct accurate, reliable RF models for wind speed forecasting.

54 ENVIRONMENTAL SCIENCES↗

The Optimization and Implementation of the Qweak Database

The Qweak experiment at Thomas Jefferson National Accelerator Facility (J-Lab) is an attempt to precisely measure the parity violation observed in low energy electron-proton scattering events. Specifically, the weak charge of the proton will be measured to $4\%$ error, which will, in turn, be used to calculate the ``running'' Weinberg mixing angle $(\sin^{2}(\theta_w))$. Since the Standard Model makes a firm prediction for $(\sin^{2}(\theta_w))$ at low energies, the experiment presents an opportunity to test the limits of this model. Any significant variation in$(\sin^{2}(\theta_w))$ from the expected value would be indicative of new physics, while an agreement would place strict constraints upon the existing model. In order to make an exact measurement of the weak charge, large amounts of data (almost 2200 hours worth) will be gathered. A large, robust database is needed to store and organize this data, so it can be analyzed in an easy and effective manner. The optimization and implementation of this database will be discussed.

Garimella, Udai↗

Studies in support of the analysis of astronomical data from Apollo 16

The Apollo Gamma Ray Spectrometer which was part of the scientific instrument module aboard Apollo 16 obtained more than 20 hours of astronomical data near the end of the transearth coast phase of the mission. During this time the vehicle was maneuvered so that every part of the sky as seen by the spectrometer was eventually occulted by the spacecraft, providing a valuable data base for gamma ray astronomy in the 100 keV to 5 MeV spectral range. Schemes classified according to the underlying assumed source distribution are analyzed. It is known that there is at least one point source, the Crab, and it can be seen in the data. Methods for data analysis are shown. In one method looking only for point sources, some preliminary results concerning the Crab nebula are presented which confirm previous measurement of the strength of that source.

Greisen, K. I.↗

TPSAS-NF1676L-33912-DND

The agricultural, renewable energy management, and science communities need global surface and top-of-atmosphere (TOA) radiative fluxes on a near real-time basis for uses such as building energy performance monitoring and seasonal crop yield modeling. The Clouds and Earth's Radiant Energy System (CERES) FLASHFlux (Fast Longwave and SHortwave radiative Flux) data products address this need by enhancing the speed of CERES processing using simplified calibration, averaging techniques and fast radiation parameterizations to produce global fluxes within a week of satellite observations. The CERES FLASHFlux provides two data products: 1) an hourly Level 2 Single Scanner Footprint (SSF) data separately for Aqua and Terra observations, and 2) a daily Level 3 Time Interpolated and Spatially Averaged (TISA) 1degree x 1degree gridded data that combines Aqua and Terra observations. The CERES FLASHFlux Version4A includes an update to process MODIS Collection 6.1 in an improved cloud retrieval algorithm, and an update to the CERES Edition 4 angular distribution models. We inter-compared FLASHFlux Version4A, FLASHFlux Version3C, and CERES EBAF (Energy Balanced and Filled) Top-of-Atmosphere fluxes to evaluate these improvements. We also compare both SSF overpass and TISA radiative flux products to a set of surface measurement sites that are globally distributed and assess agreement. FLASHFlux TISA and CERES EBAF are used in the analysis of TOA anomalies for the annual State of Climate report. This also poster highlights the methodology use to merge the two data products by correcting the bias in FLASHFlux TISA and inter-calibrate to CERES EBAF.

Parnchai K Sawaengphokhai↗

CERES Fast Longwave And SHortwave Radiative Flux (FLASHFlux): Research to Operation

The Clouds and Earth’s Radiant Energy System (CERES) project provides satellite-based observations of how Earth’s energy flows are varying in time and space and how clouds and aerosols are affecting the Earth’s radiation budget. Nominally, CERES data products require months of validation and calibration before releasing a climate quality data. The Fast Longwave and Shortwave Radiative Flux (FLASHFlux) data product was developed as to provide key radiative flux data products within a week of observations for scientific, applied science research and educational usage. FLASHFlux achieves this by using simplified calibration process and optimized CERES data fusion production system, an operation meteorology product from Global Modeling and Assimilation Office(GMAO), and surface parameterized radiative flux models. The CERES FLASHFlux provides two data products: 1) an hourly Level 2 Single Scanner Footprint (SSF) data separately for Aqua and Terra observations, and 2) a daily Level 3 Time Interpolated and Spatially Averaged (TISA) 1ox1o gridded data that combines Aqua and Terra observations.The current operational Version 3C is being transitioned to Version4A. We compare the FLASHFlux Version4A fluxes using the specialized calibration to Version3C and to the climate quality CERES Edition4A TOA and surface fluxes over time for Terra and Aqua to determine the uncertainties of the calibration process. In addition, we also compare the impact of the fluxes by using the near real-time GMAO GEOS FP-IT instead of GMAO G5-CERES meteorology data.We also compare both SSF overpass products (for Terra and Aqua) and TISA radiative flux products to a set of surface measurement sites that are globally distributed and assess agreement.Lastly, we introduce the first CERES FF SSF data products from the CERES instrument on board NOAA-20.

P Sawaengphokhai↗

CERES Fast Longwave And SHortwave Radiative Flux (FLASHFlux): Research to Operation

The Clouds and Earth’s Radiant Energy System (CERES) project provides satellite-based observations of how Earth’s energy flows are varying in time and space and how clouds and aerosols are affecting the Earth’s radiation budget. Nominally, CERES data products require months of validation and calibration before releasing a climate quality data. The Fast Longwave and Shortwave Radiative Flux (FLASHFlux) data product was developed as to provide key data for applied science research involving the renewable energy and agricultural sectors within a week of observations. FLASHFlux achieves this by using simplified calibration, an operation meteorology product from Global Modeling and Assimilation Office (GMAO), and its own surface parameterizations model. The CERES FLASHFlux provides two data products: 1) an hourly Level 2 Single Scanner Footprint (SSF) data separately for Aqua and Terra observations, and 2) a daily Level 3 Time Interpolated and Spatially Averaged (TISA) 1ox 1ogridded data that combines Aqua and Terra observations. We inter-compared of FLASHFlux Version4A calibration to the climate quality CERES Edition4A data product over time. In addition, we also inter-compared the impact of the fluxes by using the near real-time GMAO GEOS FP-IT instead of GMAO G5-CERES meteorology data. We also compare both SSF overpass and TISA radiative flux products to a set of surface measurement sites that are globally distributed and assess agreement.

P. C. Sawaengphokhai↗

CERES FLASHFlux: Low Latency Data Product for Education and Applied Science Uses

The Fast Longwave and Shortwave Radiative Flux (FLASHFlux) data product was developed to provide a rapid release version of the CERES results, which are made available to the GLOBE (Global Learning and Observations to Benefit the Environment) program and the applied science research communities involving in the renewable energy and agricultural sectors within a week of the satellite observations by exchanging some accuracy for speed. FLASHFlux provides two data products: 1) an hourly Level 2 Single Scanner Footprint (SSF) data separately for Terra, Aqua, and NOAA-20 observations, and 2) a daily Level 3 Time Interpolated and Spatially Averaged (TISA) 1-degree equal angle gridded data the combines Terra and Aqua observations. However, since both Terra and Aqua satellites are nearing end of life, the FLASHFlux data product will begin to transition to utilizing NOAA-20 observation in the TISA data product. The Visible Infrared Imaging Radiometer Suite (VIIRS) on board the NOAA-20 and the Moderate Resolution Imaging Spectroradiometer (MODIS) on board the Aqua satellites have different optics and spectral channels. We quantify the differences in the Level 2 SSF data products between the two satellites over a few sample months for cloud and radiative flux quantities for both the shortwave (solar wavelengths) and longwave (thermal infrared wavelengths) at TOA and surface. In addition, we also assess the impact of using NOAA-20 in place of Aqua in the Level 3 FLASHFlux TISA daily product on the TOA and surface radiative fluxes. Additionally, we highlight use case of FLASHFlux data product in combination with CERES EBAF to assess the Earth’s Radiation Budget, the accuracy of FLASHFlux data product compares to Surface sites measurement, and users of the FLASHFlux data through the POWER (Prediction of Worldwide Energy Resources) program.

PC Sawaengphokhai↗

Assessing the Uncertainty Impact of CERES Fast Longwave and SHortwave Radiative Flux (FLASHFlux) Level 3 Product With and Without Terra Observations

The Clouds and Earth’s Radiant Energy System (CERES) project provides satellite-based observations of how Earth’s energy flows are varying in time and space and how clouds and aerosols are affecting the Earth’s radiation budget. Nominally, CERES data products require months of validation and calibration before releasing a climate quality data. The Fast Longwave And SHortwave radiative Flux (FLASHFlux) data product was developed to provide data for applied science research involving the renewable energy and agricultural sectors within a week of observation. FLASHFlux achieves this by using simplified calibration, an operational meteorological product from Global Monitoring and Assimilation Office (GMAO), and a surface parameterizations model. The CERES FLASHFlux provides two data products: 1) an hourly Level 2 Single Scanner Footprint (SSF) data separately for Terra and NOAA-20 observations. 2) a daily Level 3 Time Interpolated and Spatially Averaged (TISA) gridded data that combines NOAA-20 and Terra observations on a one-degree equal angle grid. FLASHFlux TISA data product interpolate on a diurnal model that assumes a satellite equilateral crossing time of 10:30 AM and 1:30 PM from Terra and Aqua, respectively. Aqua was replaced by NOAA-20 starting on September 2022. Terra is planned to be replace by the Satellite ClOud and Radiation Property retrieval System (SatCORPS) soon. We are currently using the Terra observations as it continues to drift. We assess the impact of FLASHFlux TISA data when Terra is removed. An uncertainty estimate of the Top-Of-Atmosphere (TOA) fluxes are given of FLASHFlux Version4A (before Terra drift) and Version4B (current), and Version4B (no Terra) in comparison to the CERES EBAF and SYN1deg. In addition, we compare FLASHFlux Version4B and Version4B (no Terra) surface radiative fluxes to ground base measurements to determine the impact of running without Terra data.

PC Sawaengphokhai↗

Artificial Neural Network (ANN) Surface Longwave and Shortwave Fluxes Trained on CERES Observations

The Clouds and Earth’s Radiant Energy System (CERES) project provides satellite-based observations of the radiative fluxes and clouds systems. CERES climate quality data products typically take several months of calibration and validation before release to the public. The Fast Longwave and Shortwave Radiative Flux (FLASHFlux) data product was developed to provide key data for the applied sciences and educational users within a week of observation. FLASHFlux achieves this by using simplified calibration, an operational meteorological product from Global Modeling and Assimilation Office (GMAO), and its own surface parameterizations model. The CERES FLASHFlux provides two data products: 1) an hourly Level 2 Single Scanner Footprint (SSF) data separately for Terra and NOAA-20 observations, and 2) a daily Level 3 Time Interpolated and Spatially Averaged (TISA) 1o x 1o gridded data that combines Terra and NOAA-20 observations. Currently, FLASHFlux uses the Langley Parameterized Shortwave Algorithm (LPSA) and Langley Parameterized Longwave Algorithm (LPLA) to derive its surface fluxes (Kratz et al., 2010; Gupta et al, 2001). A new Machine Learning (ML) based approach using Artificial Neural Networks to derive Surface Longwave (LW) & Shortwave (SW) fluxes based on training data from the CERES Clouds Radiative Swath (CRS) product is being investigated to replace LPSA and LPLA in the SSF surface flux products. One of the biggest hurdles in training ML model is model fitting. To overcome the problem of overfitting we use feature engineering that helps in finding the important feature and remove features that are irrelevant to the model. In our training we employed the Leave-One-Feature-Out Importance (LOFO) to evaluate the significance of each feature in our training. We intercompare ANN fluxes against surface fluxes produced from the Fu-Liou model in CRS and the LPSA/LPLA in FLASHFlux SSF. Furthermore, we validated ANN derived fluxes to the Baseline Surface Radiation Network (BSRN).

P C Sawaengphokhai↗

Command and Control of Utilities Systems

The utilities systems that encompass the Y-12 National Security Complex are an integral part of the entire campus, and are essential to maintaining critical mission focus for the site. Although the utilities systems each differ in function, the central production and distribution model creates a common thread on which each system is run. Several incidents in FY 2018 and FY 2019 documented a lack of overall systems control and highlighted the need to create a better command system that could maintain system availability and decrease possible impacts to the surrounding environment. An initial system was started in September of 2019 to better control mechanical utility distribution systems. The measurement of the system can be modeled against a standard command and control related incident. The corresponding work hours from a typical control-related incident were used as key component to this system model. System effectiveness is modeled against utility’s incidents that demonstrate a loss of command and control. The increased simulations of the model also document control can only be effectively contained within the stated time (3-5 years) by yielding more engineers to complete alignments, or drastically reducing the amount of time for alignments. The total control points of the model document a clear correlation between alignments, control points, and the amount of man-hours per incident. Current data shows that actual incident man-hours (1.88 manhours/ incident since initial system implementation) are near expected incident man-hours (1.81 manhours/ incident) with command and control for October 2021, which documents a 33.3% reduction in man-hours/incident since initial system implementation. A conclusion can be drawn that focus on increasing the amount of controlled points in the system can reduce incidents and the decrease the amount of non-value added work to employee’s day-to-day lives, while also achieving a culture that enhances and sustains utilities reliability.

99 GENERAL AND MISCELLANEOUS↗

Applied Uses of MERRA Reanalyses: Current and Future Prospects

During the initial planning of the Modern Era Retrospective-analysis for Research and Applications (MERRA), the project was envisioned to become a tool for applied sciences and decision makers, as well as weather and climate research. MERRA was the first reanalysis to provide data at 1 hourly frequencies. After discussions with wind energy users, 50m above the surface winds were included in the data collection to begin to represent the environment at the turbine height. MERRA-2 was the first reanalysis to include interactive and assimilated aerosols. From these, PM 1, 2.5 and 10 records have been computed and contribute to the climate and health sector. The US Center for Disease Control is accessing MERRA-2 data for comparison along with their health data. MERRA-2 Extreme Indices have been computed from the high frequency data (e.g. precipitation maxima, heat waves and fire weather). These have been used to characterize the changing extremes in the United States and around the globe as well as the weather associated with the extremes. The next-generation, MERRA-21C, includes increased resolution (25km) and continues to provide innovative Earth system data. For example, a boundary layer collection will provide constant height level data starting at 100m, continuing up to 4000m. This will provide detailed information about the boundary layer processes that greatly affect the biosphere. Chemical tracers for constituents are included in the system. The ensemble data assimilation is run with 32 members, and the variance for critical variables are stored. We will explore the use of this variance as one measure of uncertainty relevant for applied uses, which has not been included in any MERRA reanalysis. We will discuss use case scenarios developed to engage with the energy and financial sectors, to better understand their needs for climate data. Prospects for further downscaling of reanalyses will also be explored.

Michael Bosilovich↗

The Impact and Usage of Near Real-Time and Low Latency Solutions from the Satellite Needs Working Group

The Satellite Needs Working Group (SNWG) is an interagency effort of the U.S. Government to identify the Earth observation gaps and data needs across civilian U.S. federal agencies. Within short time frames of 2 to 5 years, on behalf of SNWG, NASA formulates and implements a range of remote sensing-based solutions that benefit the entire Earth Science community and society at large. More than 20 such solutions are underway, with several addressing needs for near real-time and low latency information as a result of priorities identified in the survey. In this talk, we will present and discuss the impact and usage of such solutions, including ICESat-2 Atlas products (data delivered within 72 hours instead of the standard 45-day latency for ATLAS science products), near real-time air quality TEMPO products derived from the recently launched TEMPO mission (these products include SO 2 , NO 2 , HCHO, O 2 -O 2 cloud cover, and aerosols with a planned latency of one hour), and low latency Harmonized Landsat-Sentinel-2 (HLS) data (HLS data with a latency of 6 hours). We will talk about how these solutions are being co-designed by federal agencies to maximize their impact and usage by the scientific community. Finally, we will also invite additional stakeholders and users to get involved in the formulation, implementation, and operationalization of these solutions.

Pontus Olofsson↗

Limitations of reanalysis data for wind power applications

Wind energy resource estimates commonly depend on simulated wind speed profiles generated by reanalysis or weather models due to the lack of long time series measurements with sufficient coverage at relevant heights (roughly 90 m above ground). However, modeled data, including reanalyses, can be noisy and display a wide range of biases and errors, variously attributed to terrain effects, poor coverage of assimilated inputs, and model resolution. Wind generation records, if available at high temporal and geographical resolution, can provide a proxy for wind measurements and allow for evaluation of reanalyses and weather model wind time series. We use a 7-year-long data set of hourly, plant-level generation records from over 100 wind plants across Texas to evaluate two commonly used reanalysis data sets (MERRA2 and ERA5). Additionally, we use 1-year of records (2019) to evaluate an operational, high-resolution regional weather modeling product (HRRR v3). We find that across the region, and across all modeling products, the modeled representation of wind generation (i.e., wind speeds at hub heights passed through a power curve) has relatively small mean errors when aggregated daily, but that accuracy and hourly correlation have a strong diurnal sensitivity. Accuracy and correlation systematically decline through the evening and markedly improve after sunrise. These diurnal patterns persist even in the highest resolution model tested (HRRR v3). We hypothesize the nighttime decline in accuracy is mostly due to poorly represented boundary layer conditions, perhaps related to model representation of stability, while other uncertainties (such as wake effects) play a secondary role.

17 WIND ENERGY↗

Evaluation of Upper-Tropospheric and Lower-Stratospheric Ozone Profiles from a Global Ozone Data Assimilation System

The Data Assimilation Office at NASA's Goddard Space Flight Center provides global 3D ozone fields at six-hour time intervals. Data from Total Ozone Mapping Spectrometer (TOMS) and the Solar Backscatter Ultraviolet (SBUV) instrument are used in the assimilation. TOMS provides total column information and SBUV provides profile information, primarily above the ozone peak. Information below the ozone peak comes from the model. This paper will explore the realism of the assimilated ozone in the upper troposphere and lower stratosphere through validation with ozonesondes, Halogen Occultation Experiment (HALOE), and Polar Ozone and Aerosol Measurement (POAM) observations. This work is in preparation of using the assimilated ozone in the radiative calculation for the meteorological assimilation as well as in the derivation of tropospheric ozone.

Rood, Richard B.↗