Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrodynamics experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

On generation of Alfvenic-like fluctuations by drift wave-zonal flow system in large plasma device experiments

According to recent experiments, magnetically confined fusion plasmas with ''drift wave-zonal flow turbulence'' (DW-ZF) give rise to broadband electromagnetic waves. Sharapov et al. [Europhysics Conference Abstracts, 35th EPS Conference on Plasma Physics, Hersonissos, 2008, edited by P. Lalousis and S. Moustaizis (European Physical Society, Switzerland, 2008), Vol. 32D, p. 4.071] reported an abrupt change in the magnetic turbulence during L-H transitions in Joint European Torus [P. H. Rebut and B. E. Keen, Fusion Technol. 11, 13 (1987)] plasmas. A broad spectrum of Alfvenic-like (electromagnetic) fluctuations appears from ExB flow driven turbulence in experiments on the large plasma device (LAPD) [W. Gekelman et al., Rev. Sci. Instrum. 62, 2875 (1991)] facility at UCLA. Evidence of the existence of magnetic fluctuations in the shear flow region in the experiments is shown. We present one possible theoretical explanation of the generation of electromagnetic fluctuations in DW-ZF systems for an example of LAPD experiments. The method used is based on generalizing results on shear flow phenomena from the hydrodynamics community. In the 1990s, it was realized that fluctuation modes of spectrally stable nonuniform (sheared) flows are non-normal. That is, the linear operators of the flows modal analysis are non-normal and the corresponding eigenmodes are not orthogonal. The non-normality results in linear transient growth with bursts of the perturbations and the mode coupling, which causes the generation of electromagnetic waves from the drift wave-shear flow system. We consider shear flow that mimics tokamak zonal flow. We show that the transient growth substantially exceeds the growth of the classical dissipative trapped-particle instability of the system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling radiative-shocks created by laser–cluster interactions

Radiative-shocks induced by laser–cluster interactions are modeled using radiation-hydrodynamic simulations. A good agreement—in both shock velocity and density profiles—is obtained between experiment and simulations, indicating that non-local thermodynamic equilibrium (NLTE) radiative effects are important in the experimental regime examined, particularly at early times (≤30 ns) due to the elevated temperatures (≥35 eV). The enhanced NLTE radiative emission causes the shock to be reduced in amplitude, increased in width, and reduced in propagation velocity, while the amplitude of the radiative precursor is increased. As the density and temperature conditions are relatively modest, this potentially has important implications for the scalings that are used in laboratory–astrophysics to transform between laboratory and astrophysical scales, which do not hold for non-LTE systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

OpenFAST simulation of floating wind turbines with large heading change

Previous versions of OpenFAST, the physics-based wind turbine engineering and design tool developed by the National Renewable Energy Laboratory, were limited to small rotations of the floating platform. This prevented OpenFAST from being used to simulate important events, such as the loss of a mooring line, or specific floater concepts that might experience large platform yaw motion. To overcome this limitation, we modify the structural dynamics and hydrodynamics modules of OpenFAST to allow unrestricted platform yaw motion. We apply the improved version of OpenFAST to simulate the drifting of a floating wind turbine system after the loss of a mooring line. The results, including both global motion and the internal structural loads at selected locations, appear credible and consistent with expectations.

17 WIND ENERGY↗

Arrested-motility states in populations of shape-anisotropic active Janus particles

The emergence of large-scale collective phenomena from simple interactions between individual units is a hallmark of active matter systems. Active colloids with alignment-dominated interparticle interactions tend to develop orientational order and form motile coherent states, such as flocks and swarms. Alternatively, a combination of self-propulsion and excluded-volume interactions results in self-trapping and active phase separation into dense clusters. Here, we reveal unconventional arrested-motility states in ensembles of active discoidal particles powered by induced-charge electrophoresis. Combining experiments and computational modeling, we demonstrate that the shape asymmetry of the particles promotes the hydrodynamically assisted formation of active particles’ bound states in a certain range of excitation parameters, ultimately leading to a spontaneous collective state with arrested motility. Unlike the jammed clusters obtained through self-trapping, the arrested-motility phase remains sparse, dynamic, and reconfigurable. The demonstrated mechanism of phase separation seeded by bound state formation in ensembles of oblate active particles is generic and should be applicable to other active colloidal systems.

42 ENGINEERING↗

The rheology and hydrodynamics of dry powder lubrication

This paper conceptualizes a powder lubrication mechanisms which closely resembles that of a hydrodynamic fluid film. Based on the observations of past investigations and on the author's experiments, it is postulated that a layered shearing of the compacted powder generates velocity, density, and temperature profiles akin to fluid film bearings. Thus, a lubricant consisting of a fine powder unserted either deliberately or one generated by the water of the mating surfaces, constitutes a viable lubricant that generates the required flows and pressures to prevent contact between the surfaces.

Heshmat, Hooshang↗

A simple method to verify the opacity and equation of state of high-Z plasmas

Accurate opacity and equation of state (EOS) data are important parameters for reliable modeling and understanding many phenomena of high energy density physics. However, they are difficult to obtain either theoretically or experimentally especially for high-Z plasmas. In this paper, we proposed a simple method to verify the opacity and EOS of high-Z plasmas in rarefactive states, which is build on the two key aspects of ablation processes, i.e., the propagation of heatwave into materials and the hydrodynamic expansion of the blow-off plasmas. Based on the integrated analysis of the Au foil burnthrough and foam-confined plasma expansion experiments performed on the Shenguang II and Shenguang III prototype laser facilities, we suggested two semi-empirical multipliers to adjust the opacity and EOS of Au plasma. These adjusted opacity and EOS may then provide a foundation for other radiation hydrodynamic simulations under similar drive conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A new hydrodynamic analysis of double layers

A genuine two-fluid model of plasmas with collisions permits the calculation of dynamic (not necessarily static) electric fields and double layers inside of plasmas including oscillations and damping. For the first time a macroscopic model for coupling of electromagnetic and Langmuir waves was achieved with realistic damping. Starting points were laser-produced plasmas showing very high dynamic electric fields in nonlinear force-produced cavitous and inverted double layers in agreement with experiments. Applications for any inhomogeneous plasma as in laboratory or in astrophysical plasmas can then be followed up by a transparent hydrodynamic description. Results are the rotation of plasmas in magnetic fields and a new second harmonic resonance, explanation of the measured inverted double layers, explanation of the observed density-independent, second harmonics emission from laser-produced plasmas, and a laser acceleration scheme by the very high fields of the double layers.

Hora, Heinrich↗

Modeling and Algorithmic Approaches to Constitutively-Complex, Micro-structured Fluids

The team for this Project made significant progress on modeling and algorithmic approaches to hydrodynamics of fluids with complex microstructure. Our advances are broken down into modeling and algorithmic approaches. In experiments a driven magnetic bead in a complex fluid accelerates out of the Stokes regime and settles into another apparent linear response regime. The modeling explains the take-off as a deformation of entanglements, and the longtime behavior is a nonlinear, far-from-equilibrium property. Furthermore, the model has predictive value, as we can tune microstructural properties relative to the magnetic force applied to the bead to exhibit all possible behaviors. Wave-theoretic probes of complex fluids have been extended in two significant directions, to small volumes and the nonlinear regime. Heterogeneous stress and strain features that lie beyond experimental capability were studied. It was shown that nonlinear penetration of boundary stress in confined viscoelastic fluids is not monotone, indicating the possibility of interlacing layers of linear and nonlinear behavior, and thus layers of variable viscosity. Models, algorithms, and codes were developed and simulations performed leading to phase diagrams of nanorod dispersion hydrodynamics in parallel shear cells and confined cavities representative of film and membrane processing conditions. Hydrodynamic codes for polymeric fluids are extended to include coupling between microscopic and macroscopic models, and to the strongly nonlinear regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Proceedings of the 2004 NASA/ONR Circulation Control Workshop, Part 1

As technological advances influence the efficiency and effectiveness of aerodynamic and hydrodynamic applications, designs and operations, this workshop was intended to address the technologies, systems, challenges and successes specific to Coanda driven circulation control in aerodynamics and hydrodynamics. A major goal of this workshop was to determine the 2004 state-of-the-art in circulation control and understand the roadblocks to its application. The workshop addressed applications, CFD, and experiments related to circulation control, emphasizing fundamental physics, systems analysis, and applied research. The workshop consisted of 34 single session oral presentations and written papers that focused on Naval hydrodynamic vehicles (e.g. submarines), Fixed Wing Aviation, V/STOL platforms, propulsion systems (including wind turbine systems), ground vehicles (automotive and trucks) and miscellaneous applications (e.g., poultry exhaust systems and vacuum systems). Several advanced CFD codes were benchmarked using a two-dimensional NCCR circulation control airfoil. The CFD efforts highlighted inconsistencies in turbulence modeling, separation and performance predictions.

Jones, Gregory S.↗

Streaked radiography of an irradiated foam sample on the National Ignition Facility

Streaked x-ray radiography images of annular patterns in an evolving tantalum oxide foam under the influence of a driven, subsonic radiation wave were obtained on the National Ignition Facility. This is the first successful radiography measurement of the evolution of well-defined foam features under a driven, subsonic wave in the diffusive regime. A continuous record of the evolution was recorded on an x-ray streak camera, using a slot-apertured point-projection backlighter with an 8 ns nickel source (7.9 keV). Radiography images were obtained for four different annular patterns, which were corrected using a source-dependent flat-field image. The evolution of the foam features was well-modeled using the 3D KULL radiation hydrodynamics code. This experimental and modeling platform can be modified for scaled high-energy-density laboratory astrophysics experiments.

36 MATERIALS SCIENCE↗

Understanding the evolution of liquid and solid microjets from grooved Sn and Cu samples using radiography

Experiments were performed on grooved Sn and Cu samples to study the temporal evolution of microjets. Jets were generated by the impact of gun-launched flyer plates against the back of grooved targets made from either Cu or Sn (groove depth of ~250 μm). The Hugoniot states in the various Sn targets encompassed conditions where solid phases are maintained throughout (7 and 16 GPa) and also conditions where melting occurs upon the release of compression (25 and 34 GPa); the transition occurs near a Hugoniot pressure of 23 GPa. Cu targets at 27 and 56 GPa provide comparisons in which the jets move at similar speeds but remain solid. In all cases, the spatial distribution of mass within the microjets was measured using high-speed synchrotron radiography. The result is a time history of the jet thickness profile from which quantities like total jet mass and jet velocity can be derived. In both the solid and liquid states, we generally observe that an increase in the shock strength leads to an increase in jet mass. However, this trend breaks down for Hugoniot states near the transition from continuously solid to melted-on-release. This is evidenced by the observation that there was no difference in the rate of mass flow in Sn jets at 16 and 25 GPa, while similar pressure jumps on either side of this range caused substantial changes in the jet mass. This contrasts with the behavior of smaller polishing defects that were present on the same samples (~1 μm deep). From these, no ejecta mass was detected below the melt boundary, but obvious microjets were generated once melting occurred. This indicates that crossing the bulk melt-on-release threshold can alternately promote or inhibit the flow of mass into microjets based on the amplitude of the initial perturbation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pivotal Roles of Triple Screening-Topological, Electrostatic, and Hydrodynamic-On Dynamics in Semidilute Polyelectrolyte Solutions

For semidilute polyelectrolyte solutions, it is generally assumed that topological, electrostatic, and hydrodynamic interactions are screened (called triple screening). Despite a large body of research focused on polyelectrolyte solutions, the concept of triple screening has never been rigorously verified. In this work, we test the concept by probing concentration fluctuations in aqueous solutions containing a well-studied polyelectrolyte, sodium poly(styrenesulfonate) (NaPSS) with neutron scattering, theory, and molecular dynamics simulations. Neutron spin–echo (NSE) and small-angle neutron scattering (SANS) data from semidilute solutions of NaPSS are presented at different polymer and salt (NaCl) concentrations. A combined theory for structure (J. Chem. Phys. 105, 5183 (1996)) and dynamics (J. Chem. Phys. 107, 2619 (1997)), which captures effects of hydrodynamic, topological, and electrostatic screening, is used to interpret the experimental results. Here, the theory quantitatively predicts the decay rate obtained from the NSE measurements while capturing the shape and concentration dependencies of the polyelectrolyte peak observed in the SANS spectra. Detailed comparisons of the theory and the experiments reveal that the wavevector-dependent decay rate of concentration fluctuations in semidilute solutions of polyelectrolytes is dictated by the screening of hydrodynamic, topological, and electrostatic interactions. This conclusion is corroborated by coarse-grained molecular dynamics simulations, executed without any hydrodynamic interactions, which fail to capture the correct wavevector dependence of the decay rate. These results highlight that the theories based on the concept of triple screening provide a quantitative framework for predicting a relation between the structure and dynamics of polyelectrolyte solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of high-pressure iron Rayleigh–Taylor strength experiments for the National Ignition Facility

Iron is an important metal, scientifically and technologically. It is a common metal on Earth, forming the main constituent of the planet's inner core, where it is believed to be in solid state at high pressure and high temperature. It is also the main component of many important structural materials used in quasistatic and dynamic conditions. Laser-driven Rayleigh–Taylor instability provides a means of probing material strength at high pressure and high temperature. The unavoidable phase transition in iron at relatively low pressure induces microstructural changes that ultimately affect its strength in this extreme regime. This inevitable progression can make it difficult to design experiments and understand their results. Here, we address this challenge with the introduction of a new approach: a direct-drive design for Rayleigh–Taylor strength experiments capable of reaching up to 400 GPa over a broad range of temperatures. We use 1D and 2D hydrodynamic simulations to optimize target components and laser pulse shape to induce the phase transition and compress the iron to high pressure and high temperature. At the simulated pressure–temperature state of 350 GPa and 4000 K, we predict a ripple growth factor of 3–10 depending on the strength with minimal sensitivity to the equation of state model used. The growth factor is the primary observable, and the measured value will be compared to simulations to enable the extraction of the strength under these conditions. These experiments conducted at high-energy laser facilities will provide a unique way to study an important metal.

36 MATERIALS SCIENCE↗

Developing one-dimensional implosions for inertial confinement fusion science

Experiments on the National Ignition Facility show that multi-dimensional effects currently dominate the implosion performance. Low mode implosion symmetry and hydrodynamic instabilities seeded by capsule mounting features appear to be two key limiting factors for implosion performance. One reason these factors have a large impact on the performance of inertial confinement fusion implosions is the high convergence required to achieve high fusion gains. To tackle these problems, a predictable implosion platform is needed meaning experiments must trade-off high gain for performance. LANL has adopted three main approaches to develop a one-dimensional (1D) implosion platform where 1D means measured yield over the 1D clean calculation. A high adiabat, low convergence platform is being developed using beryllium capsules enabling larger case-to-capsule ratios to improve symmetry. The second approach is liquid fuel layers using wetted foam targets. With liquid fuel layers, the implosion convergence can be controlled via the initial vapor pressure set by the target fielding temperature. The last method is double shell targets. For double shells, the smaller inner shell houses the DT fuel and the convergence of this cavity is relatively small compared to hot spot ignition. However, double shell targets have a different set of trade-off versus advantages. As a result, details for each of these approaches are described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetohydrodynamics and Heat Transfer in a Free-Surface, Flowing Liquid Metal Experiment

This thesis examines magnetohydrodynamic (MHD) effects and heat transfer in free-surface, liquid metal flow. The interaction of the flow with the applied magnetic field introduces an anisotropy to the fluid motion, resulting in starkly different behavior depending on the orientation and strength of the applied magnetic field. The transition from a hydrodynamic state to an MHD state was experimentally found to be characterized by the interaction parameter, N = &sigma L B 2 /&rho v0 , crossing above 0.5. The experiment consisted of a channel 1 m in length, up to 16 cm in width and 1 to 2.5 cm in depth situated within an electromagnet capable of producing a uniform magnetic field up to 2.7 kG. The fluid velocity was measured with an array of 25 potential probes that resolved the spanwise velocity profile, while waves on the surface of the metal were monitored via a diagnostic that tracked the motion of a laser beam reflected off of the free surface. Lastly, the temperature response of the fluid was recorded with an array of 32 thermocouples embedded in the bottom of the channel and a mid-wavelength infrared camera used to image the free surface. Three distinct sets of experiments were performed to investigate the effects of the applied magnetic field on the dynamics within the flow, studying: 1) changes to vortices in the wake of a cylinder, 2) behavior of surface fluctuations due to the turbulent flow, and 3) vertical heat transfer resulting from heat deposition on the free surface. The first set of experiments examined the wake of a cylinder inserted into the flow with its axis parallel to the magnetic field. Measurements with the potential probes indicated that vortices in the wake became laminarized as the field was increased due to the alignment of the injected vorticity with the applied field. The second set of experiments showed that surface fluctuations were suppressed at high magnetic fields, but the precise nature of the damping depended on the orientation of the applied field. Lastly, when heat was injected at the free surface via a resistive heater, the temperature response of the fluid was found to vary considerably depending on the strength and direction of the applied field. In all experiments, it was observed that the angle between the vorticity of structures in the flow and the applied magnetic field dictated the macroscopic behavior of the fluid. This work provides the first experimental results of several phenomena associated with free-surface, liquid metal flows in an applied magnetic field. Further, the results have direct implications for proposed flowing liquid metal divertors for fusion reactors, and offer insight into the nature of turbulent MHD flows.

fusion↗

Hydrodynamics of the interacting Bose gas in the Quantum Newton Cradle setup

Describing and understanding the motion of quantum gases out of equilibrium is one of the most important modern challenges for theorists. In the groundbreaking Quantum Newton Cradle experiment [Kinoshita, Wenger and Weiss, Nature 440, 900 (2006)], quasi-one-dimensional cold atom gases were observed with unprecedented accuracy, providing impetus for many developments on the effects of low dimensionality in out-of-equilibrium physics. But it is only recently that the theory of generalized hydrodynamics has provided the adequate tools for a numerically efficient description. Using it, we give a complete numerical study of the time evolution of an ultracold atomic gas in this setup, in an interacting parameter regime close to that of the original experiment. We evaluate the full evolving phase-space distribution of particles. We simulate oscillations due to the harmonic trap, the collision of clouds without thermalization, and observe a small elongation of the actual oscillation period and cloud deformations due to many-body dephasing. We also analyze the effects of weak anharmonicity. In the experiment, measurements are made after release from the one-dimensional trap. We evaluate the gas density curves after such a release, characterizing the actual time necessary for reaching the asymptotic state where the integrable quasi-particle momentum distribution function emerges.

Caux, Jean-Sébastien↗

Hydrodynamic Characterization of a Shallow Rectangular Spouted Bed Using Bed Pressure Signals and Image Processing Methods

To support the design of spouted bed reactors, experiments are performed in a rectangular spouted bed to measure the peak pressure drop (Δ P max ) and the internal and external spouting velocities ( U is and U es ). Four particle types spanning under Geldart D and B are used. U is and U es are measured from bed pressure drop and expansion ratio profiles, respectively, with the U es / U is ratio of each particle type obtained. Additionally, correlations predicting the Δ P max of Geldart D and B particles are developed by reviewing published correlations and investigating the nozzle effect. Good prediction is achieved with a slope of 0.997 and an adjusted R 2 of 0.998 in a 95% confidence interval. U es is predicted through correlations developed by adding effects of d p / D i and H 0 in the Mathur–Gishler equation. The calculated U es agrees well with the experimental data, achieving a slope of 0.998 and an adjusted R 2 of 0.998 in a 95% confidence interval.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗