Search NASA⌕ Search

SEARCH · Search NASA

Results for “MODEL SIMULATION DATA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Splashing Droplets

Current data on droplet breakup is scarce for the sizes and velocities typical of practical applications such as in spray combustion processes and coating processes. While much more representative of practical applications, the small spatial scales and rapid time-scales prevent detailed measurement of the internal fluid dynamics and liquid property gradients produced by impinging upon surfaces. Realized through the extended spatial and temporal scales afforded by a microgravity environment, an improved understanding of drop breakup dynamics is sought to understand and ultimately control the impingement dynamics of droplets upon surfaces in practical situations. The primary objective of this research will be to mark the onset of different 'splashing modes' and to determine their temperature, pressure and angle dependence for impinging droplets representative of practical fluids. In addition, we are modeling the evolution of droplets that do not initially splash but rather undergo a 'fingering' evolution observed on the spreading fluid front and the transformation of these fingers into splashed products. An example of our experimental data is presented below. These images are of Isopar V impacting a mirror-polished surface. They were acquired using a high-speed camera at 1000 frames per second. They show the spreading of a single droplet after impact and ensuing finger instabilities. Normal gravity experimental data such as this will guide low gravity measurements in the 2.2 second drop tower and KC-135 aircraft as available. Presently we are in the process of comparing the experimental data of droplet shape evolution to numerical models, which can also capture the internal fluid dynamics and liquid property gradients such as produced by impingement upon a heated surface. To-date isothermal numerical data has been modeled using direct numerical simulations of representative splashing droplets. The data obtained so far indicates that the present model describes well the droplet wall interactions to a point in time just before splash. Additional information is included in the original extended abstract.

VanderWal, Randall L.↗

Diagnosing nuclear power plant pipe wall thinning due to flow accelerated corrosion using a passive, thermal non-destructive evaluation method: Feasibility assessment via numerical experiments

Flow accelerated corrosion (FAC) in nuclear power plant pipes is one of the leading causes of accidents, fatalities, damage and outages. Current FAC identification methods employ expensive sensing technology and are “active” methods, where the response of the piping system to an externally-generated thermal, mechanical or optical excitation must be measured. As a result, these techniques require a disruptive and time-consuming setup. Here we propose a method that utilizes pipe surface temperature measurements to passively monitor for FAC-induced pipe wall thinning without the need for expensive equipment or post-installation setup time. This diagnostic method utilizes a simulation data-driven diagnostic model to estimate the amount of thickness reduction in a pipe based on changes in measured steady-state pipe temperatures. In order to reduce the computational burden of generating large, simulation-based datasets, the behavior of the insulation of the pipe was modeled using a suitably calibrated heat transfer boundary parameter. Additionally, global sensitivity analysis was performed to determine system parameter(s), such as the temperature of water flowing inside the pipe, which significantly affect the steady state pipe wall temperature and could cause errors in diagnosis. Two diagnostic models, one using only the change in steady-state temperature as an indicator for FAC-induced pipe wall thinning and the other using water temperature as an additional diagnostic model input were evaluated for their ability to estimate thickness reductions in a pipe using simulated pipe wall temperature data. For the numerical experiments conducted in this work, both models estimated wall thickness with errors within 0.5 mm, indicating that the proposed technique can potentially be used as a low-cost, first-pass method for FAC monitoring.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Investigations of correlation and coherence in turbulence from a large-eddy simulation

Abstract. Microscale flow descriptions are often given in terms of mean quantities, turbulent kinetic energy, and/or stresses. Those metrics, while valuable, give limited information about turbulent eddies and coherent turbulent structures. This work investigates the structure of an atmospheric boundary layer using coherence and correlation in space and time with a range of separation distances. We calculate spatial correlations over entire planes of velocity fluctuations, from which we can evaluate the correlation along different directions at different spacings. Similarly, coherence of the three velocity components over separations in the three directions is also investigated. We apply these analyses to a mesoscale–microscale coupled scenario with time-varying conditions and examine nuances in spatial correlations that are often overlooked. Through these analyses and results, this work highlights important differences observed in terms of coherence when comparing large-eddy simulation data to simpler models and suggests ways to improve these simpler models. We note that such differences are important for disciplines like wind energy structural dynamic analysis, in which blade loading and fatigue depend strongly on the structure of the turbulence. We emphasize the additional wealth of data that can be provided by typical atmospheric boundary layer large-eddy simulation when correlation and coherence analysis is included, and we also state the limitations of large-eddy simulation data, which inherently truncate the smaller scales of turbulence.

17 WIND ENERGY↗

Scale model acoustic testing of counterrotating fans

The UDF contrarotating propfan has been subjected to scale model wind tunnel testing to ascertain both general performance and acoustic characteristics data bases. Model Propulsion Simulator test rigs able to mount contrarotating fan blades of up to 24.5-inch diameter were used, and one of these was installed in a large anechoic test chamber for acoustic measurement of conditions simulating representative takeoffs, power cutbacks, and landing approaches. Attention is presently given to the data acquisition/reduction systems, the scaling criteria used to obtain engine size acoustic data, and comparisons with demonstrator aircraft in-flight acoustic test results.

Janardan, B. A.↗

Predicting Fiber Failure of Plain Weave Fabric with Recursive Multiscale Micromechanics

Recent advances in the development of machine learning (ML) algorithms have enabled the creation of predictive models that can improve decision making, decrease computational cost, and improve efficiency in a variety of fields. As an organization begins to develop and implement such models, the data used in the training, validation, and testing of machine learning models, the model parameters, and the use cases or limitations of the models must be properly stored to ensure models are both fully traceable and used correctly. In the context of predicting material behavior, advances in computationally intense, physics-based, modeling of material behavior at various length scales, and the emergence of Integrated Computational Materials Engineering (ICME) have driven the need for developing data-driven surrogate models of the physics-based simulation tools using machine learning (ML) techniques. Surrogate model development allows for accurate material behavior prediction at a fraction of the cost of its physics-based counterpart, allowing for multiscale simulations of real-world applications, further enabling the ability to design fit-for-purpose materials for a reasonable computational investment. However, training such models requires extensive data, and thus effective data management is necessary to reach the full potential that ML can offer to material design and ICME. This paper proposes a generalized, robust schema that allows organizations to store both real (experimental) and virtual (simulation) data used to train machine learning models and the defining model parameters and architectures. The developed schema allows for various types of data inputs and outputs, including single point values, time-series data, and images that can be used in for various types of machine learning models while following outlined best practices for effective data management. An effective schema for machine learning data and models can help prevent the recreation of virtual/real training data and surrogate models, can help reduce the time to create new models similar to existing ones by offering a starting point in the hyperparameter determination stages, minimize resources devoted to verification and validation (V&V) and certification of models, and ensure that data and surrogate models are not misused due to full traceability of both the data and ML model. It also allows organizations access to models that have already been developed, such that they can be used in the design of new materials, enabling the overall goals of ICME.

Failure↗

Future projections and uncertainty assessment of precipitation extremes in the Korean peninsula from the CMIP5 ensemble

Abstract Projections of changes in extreme climate are sometimes predicted by multimodel ensemble methods that combine forecasts from individual simulation models using weighted averaging. One method to assign weight to each model is the Bayesian model averaging (BMA) in which posterior probability is used. For the cases of extreme climate, the generalized extreme value distribution (GEVD) is typically used. We applied the approach of GEV‐embedded BMA to a series of 35 years of the annual maximum daily precipitation data (both historical data and data gathered from simulation experiments for future periods) over the Korean peninsula as simulated by the models in the Coupled Model Intercomparison Project Phase 5 (CMIP5). Simulation data under two Representative Concentration Pathway (RCP) scenarios, namely RCP4.5 and RCP8.5, were used. Observed data and 17 CMIP5 models for 12 gird cells in Korea have been examined to predict future changes in precipitation extremes. A simple regional frequency analysis of pooling observations from three stations in each cell was employed to reduce the estimation variance and local fluctuations. A bias correction technique using the regression‐type transfer function was applied to these simulation data. Return levels spanning over 20 and 50 years, as well as the return periods relative to the reference years (1971–2005), were estimated for two future periods, namely Period 1 (2021–2050) and Period 2 (2066–2095). From these analyses, relative increase observed in the spatially averaged 20‐year (50‐year) return level was approximately 23% (16%) and 45% (36%) in the RCP4.5 and RCP8.5 experiments, respectively, by the end of the 21st century. We concluded that extreme rainfalls will likely occur two times and four times more frequently in the RCP4.5 and RCP8.5 scenarios, respectively, as compared to in the reference years by the end of the 21st century.

Lee, Youngsaeng↗

Prism Users Guide (V.1.0)

Prism is a ParaView plugin that simultaneously displays simulation data and material model data. This document describes its capabilities and how to use them. A demonstration of Prism is given in the first section. The second section contains more detailed notes on less obvious behavior. The third and fourth sections are specifically for Alegra and CTH users. They tell how to generate the simulation data and SESAME files and how to handle aspects of Prism use particular to each of these codes.

99 GENERAL AND MISCELLANEOUS↗

Saturn's upper atmosphere from the Voyager 2 EUV solar and stellar occultations

The temperature and composition of the upper atmosphere of Saturn have been inferred from Voyager 2 ultraviolet-spectrometer-occultation measurements made by observing the sun and the star Delta Scorpii while they were being occulted by Saturn. The observations analyzed here provide atmospheric parameters from 2900 km down to 960 km above the 1-bar level referred to the equator. The temperature in the model simulation of the data is 420 + or - 30 K down to about 1600 km. Below 1600 km the temperature decreases with a variable lapse rate down to 120 + or - 30 K near the methane homopause located at 1010 + or - 40 km. A constant temperature at 120 K is applied in the model for the region of the methane homopause down to 960 km where the present analysis terminates. Column amounts of H2 and H were measured from 2900 km down to about 1100 km, giving respective densities of about 1.0 x 10 to the 8th/cu cm and about 5.5 x 10 to the 6th/cu cm near the exobase at 2500 km. Near the methane homopause the H2 density is = 1.2 x 10 to the 12th/cu cm with a CH4 number-density mixing ratio of 0.00006. The eddy-diffusion coefficient in the vicinity of the methane homopause is estimated to be 5.0 x 10 to the 6th sq cm/sec. The atomic hydrogen density profile suggests a downward H flux of 1.8 x 10 to the 9th sq cm/sec from near the exobase down to a terminal boundary of about 1200 km.

Smith, G. R.↗

TPSAS-NF1676L-20351-DND

Characterization of atmospheric variability is crucial to the design of the Entry, Descent, and Landing (EDL) activities at Mars. The distribution of dust in the Martian atmosphere has a significant impact on the atmospheric structure and variability. Information obtained through reconstruction of EDL data from past missions can be used in studying the performance of a model used in preflight atmospheric characterization for future missions. We use the Mars Weather Research and Forecasting (MarsWRF) General Circulation Model to simulate the atmospheric temperature during the landing time periods of Mars Exploration Rovers MER-A and MER-B in 2004. The multi-scale capability of MarsWRF is useful for conducting high- resolution nested simulation centered at the landing site. This version of MarsWRF includes a high spectral accuracy k-distribution radiative transfer model. We use the IR dust opacity profile data from the Thermal Emission spectrometer (TES) limb scan data as well as the TES Nadir data to prescribe the dust opacity distribution. Data from MY 26, which corresponds to the year of MER landing, and data from a climatology based on the median of 4 years (MY24 to MY27) of TES data are used. Model temperature profiles are compared with the reconstructions from EDL data and TES observations. Sensitivity of the model simulation to variations in the input opacity data are shown.

Murali Natarajan↗

First Measurement of the Underlying Event Activity at the LHC with $\sqrt{s} = 0.9$ TeV

A measurement of the underlying activity in scattering processes with transverse momentum scale in the GeV region is performed in proton-proton collisions at sqrt(s) = 0.9 TeV, using data collected by the CMS experiment at the LHC. Charged hadron production is studied with reference to the direction of a leading object, either a charged particle or a set of charged particles forming a jet. Predictions of several QCD-inspired models as implemented in PYTHIA are compared, after full detector simulation, to the data. The models generally predict too little production of charged hadrons with pseudorapidity eta < 2, p_T > 0.5 GeV/c, and azimuthal direction transverse to that of the leading object.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Adaptive clutter rejection filters for airborne Doppler weather radar applied to the detection of low altitude windshear

An optimum adaptive clutter rejection filter for use with airborne Doppler weather radar is presented. The radar system is being designed to operate at low-altitudes for the detection of windshear in an airport terminal area where ground clutter returns may mask the weather return. The coefficients of the adaptive clutter rejection filter are obtained using a complex form of a square root normalized recursive least squares lattice estimation algorithm which models the clutter return data as an autoregressive process. The normalized lattice structure implementation of the adaptive modeling process for determining the filter coefficients assures that the resulting coefficients will yield a stable filter and offers possible fixed point implementation. A 10th order FIR clutter rejection filter indexed by geographical location is designed through autoregressive modeling of simulated clutter data. Filtered data, containing simulated dry microburst and clutter return, are analyzed using pulse-pair estimation techniques. To measure the ability of the clutter rejection filters to remove the clutter, results are compared to pulse-pair estimates of windspeed within a simulated dry microburst without clutter. In the filter evaluation process, post-filtered pulse-pair width estimates and power levels are also used to measure the effectiveness of the filters. The results support the use of an adaptive clutter rejection filter for reducing the clutter induced bias in pulse-pair estimates of windspeed.

Keel, Byron M.↗

A Comparison of Satellite Based, Modeled Derived Daily Solar Radiation Data with Observed Data for the Continental US

Many applications of simulation models and related decision support tools for agriculture and natural resource management require daily meteorological data as inputs. Availability and quality of such data, however, often constrain research and decision support activities that require use of these tools. Daily solar radiation (SRAD) data are especially problematic because the instruments require electronic integrators, accurate sensors are expensive, and calibration standards are seldom available. The Prediction Of Worldwide Energy Resources (NASA/POWER; power.larc.nasa.gov) project at the NASA Langley Research Center estimates daily solar radiation based on data that are derived from satellite observations of outgoing visible radiances and atmospheric parameters based upon satellite observations and assimilation models. The solar data are available for a global 1 degree x 1 degree coordinate grid. SRAD can also be estimated based on attenuation of extraterrestrial radiation (Q0) using daily temperature and rainfall data to estimate the optical thickness of the atmosphere. This study compares daily solar radiation data from NASA/POWER (SRADNP) with instrument readings from 295 stations (SRADOB), as well as with values that were estimated with the WGENR solar generator. WGENR was used both with daily temperature and precipitation records from the stations reporting solar data and records from the NOAA Cooperative Observer Program (COOP), thus providing two additional sources of solar data, SRADWG and SRADCO. Values of SRADNP for different grid cells consistently showed higher correlations (typically 0.85 to 0.95) with SRADOB data than did SRADWG or SRADCO for sites within the corresponding cells. Mean values of SRADOB, SRADWG and SRADNP for sites within a grid cell usually were within 1 MJm-2d-1 of each other, but NASA/POWER values averaged 1.1 MJm-2d-1 lower than SRADOB. The magnitude of this bias was greater at lower latitudes and during summer months and may be at least partially explained by assumptions in ambient aerosol properties. Overall, the NASA/POWER solar radiation data are a promising resource for regional modeling studies where realistic accounting of historic variation is required.

White, Jeffrey W.↗

Improved Muon Energy Estimation Using a Detailed Model of Multiple Coulomb Scattering in the MicroBooNE LArTPC

We present an improved technique for estimating a muon's energy by measuring the deflections along its path inside the MicroBooNE detector from multiple Coulomb scattering (MCS). This approach implements several innovations that better capture detector non-idealizations compared to previous MCS-based muon energy estimators. As a result, it achieves improved resolution, reduced bias, and better data-model agreement. Using model simulation, for fully contained events the estimated bias is within 1\% and the estimated resolution narrows from 10\% to 4.3\% as muon energy increases from 0.1\,GeV to 2\,GeV. For events with particles exiting the detector volume, at least a meter of reconstructed muon track, and a muon energy below 2\,GeV, the estimated bias is less than 2\% and the estimated resolution varies from 7\% to 17\% over muon energy. These demonstrate significant improvements over the performance of previous work using an MCS-based energy estimator at MicroBooNE~\cite{mcs_2017}, which exhibited approximately twice worse resolution and a bias of 20\% over the same energy region. Data-model goodness-of-fit studies are used to validate the estimator's performance on data, showing good agreement within model uncertainties.

Cooper-Troendle, London [U. Pittsburgh (main); Fer↗

Recent progress towards predicting aircraft ground handling performance

Capability implemented in simulating aircraft ground handling performance is reviewed and areas for further expansion and improvement are identified. Problems associated with providing necessary simulator input data for adequate modeling of aircraft tire/runway friction behavior are discussed and efforts to improve tire/runway friction definition, and simulator fidelity are described. Aircraft braking performance data obtained on several wet runway surfaces are compared to ground vehicle friction measurements. Research to improve methods of predicting tire friction performance are discussed.

Yager, T. J.↗

Propagating Uncertainties in the SALT3 Model-training Process to Cosmological Constraints

Type Ia supernovae (SNe Ia) are standardizable candles that must be modeled empirically to yield cosmological constraints. To understand the robustness of this modeling to variations in the model-training procedure, we build an end-to-end pipeline to test the recently developed SALT3 model. We explore the consequences of removing pre-2000s low-z or poorly calibrated U-band data, adjusting the amount and fidelity of SN Ia spectra, and using a model-independent framework to simulate the training data. We find that the SALT3 model surfaces are improved by having additional spectra and U-band data, and can be shifted by ~5% if host-galaxy contamination is not sufficiently removed from SN spectra. We find that resulting measurements of w are consistent to within 2.5% for all of the training variants explored in this work, with the largest shifts coming from variants that add color-dependent calibration offsets or host-galaxy contamination to the training spectra and those that remove pre-2000s low-z data. These results demonstrate that the SALT3 model-training procedure is largely robust to reasonable variations in the training data, but that additional attention must be paid to the treatment of spectroscopic data in the training process. We also find that the training procedure is sensitive to the color distributions of the input data—the resulting w measurement can be biased by ~2% if the color distribution is not sufficiently wide. Future low-z data, particularly u-band observations and high signal-to-noise ratio SN Ia spectra, will help to significantly improve SN Ia modeling in the coming years.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulation of Spent Nuclear Fuel loading into a Final Waste Repository

Previous work towards studying repository loading have used: - spent nuclear fuel (SNF) with an average burnup composition; - a lumped capacitance thermal model for calculating temperature in a Cyclus repository model. The goal of this work is to improve on the repository models and use U.S. historical SNF inventory data in simulations to more accurately study the loading of a waste repository. These goals will be achieved by: - using UNF-ST-and-DARDS Unified Database (UDB) that has historic assembly-specific data (e.g, isotopic composition, heat) in Cyclus simulations; - implementing a more accurate thermal model within a Cyclus repository model. Objectives: - Create a Cyclus spent fuel conditioning model that packages spent fuel bundles into packages which have user-defined properties. - Create a Cyclus medium-fidelity repository model that gives accurate time and spatial dependent temperature values and loads the repository based on a user-selected loading strategy. Cyclus is an agent-based extensible framework for modeling flow of material through user-defined nuclear fuel cycles. In Cyclus, each facility in the fuel cycle is modeled individually and the facilities interact with one another as independent agents. The spent fuel conditioning model accepts spent fuel bundles and puts them into a cylindrical waste package. In the spent fuel conditioning model, the user can define variables: For each layer, radius, thermal conductivity, thermal diffusivity; For each package, Number of spent fuel bundles, Radius and height. The waste repository model accepts waste packages and emplaces them into available positions within the waste repository based on a thermal criteria. The thermal criteria is a temperature limit at the interface between the waste package surface and the host geology, that is set based on the repository's host geology. In the waste repository model, the user can define the variables: Capacity, Distance between waste packages, Distance between drifts, Repository host geology, Loading Strategy. After the addition of new waste packages at each time step, the waste repository model recalculates the temperature at each location in the repository. If the addition of this new package causes its temperature to exceed the thermal limit, it will be placed back into the buffer. A thermal model that relies on a transient 'outside' model and quasi-steady-state 'inside' model is used to accurately determine the temperature in the repository. The 'outside' model assumes a homogenous medium with the Engineered Barrier System (EBS) replaced by the geologic medium. Temperature solutions for the central waste package, adjacent point and line sources are superimposed to calculate the temperature at specific points in the repository. The central drift consists of one finite line source which represents the central waste package. The central drift also consists of point sources that represent neighboring waste packages in the central drift. The neighboring drifts are represented by infinite line sources. The 'inside' model is considered to be at a quasi-steady-state condition because EBS has a relatively low thermal mass compared to the infinite geologic medium. The steady state calculation is performed at each time step with the heat source and interface temperature as boundary conditions. Future Work: Run Cyclus simulations with U.S. historical SNF inventory data, the spent fuel conditioning and repository models to study how waste package acceptance strategies impact repository loading.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An Active Learning-Based Streaming Pipeline for Reduced Data Training of Structure Finding Models in Neutron Diffractometry

Structure determination workloads in neutron diffractometry are computationally expensive and routinely require several hours to many days to determine the structure of a material from its neutron diffraction patterns. The potential for machine learning models trained on simulated neutron scattering patterns to significantly speed up these tasks have been reported recently. However, the amount of simulated data needed to train these models grows exponentially with the number of structural parameters to be predicted and poses a significant computational challenge. To overcome this challenge, we introduce a novel batch-mode active learning (AL) policy that uses uncertainty sampling to simulate training data drawn from a probability distribution that prefers labelled examples about which the model is least certain. We confirm its efficacy in training the same models with ∼ 75% less training data while improving the accuracy. We then discuss the design of an efficient stream-based training workflow that uses this AL policy and present a performance study on two heterogeneous platforms to demonstrate that, compared with a conventional training workflow, the streaming workflow delivers ∼ 20% shorter training time without any loss of accuracy.

Wang, Tianle [Brookhaven National Laboratory (BNL)↗

Data-driven model for cross ventilation potential in high-density cities based on coupled CFD simulation and machine learning

Effective urban ventilation through decent urban planning and building design can alleviate the deterioration of the urban built environment. Furthermore, natural ventilation requirements and guidelines in current building codes and standards are either qualitative or quantitative but subject to an absolute indoor airspeed threshold without considering the outdoor wind environment. To fill this gap, this paper develops an urban-scale coupled indoor and outdoor computational fluid dynamics (CFD) model and defines a novel ventilation index to assess natural ventilation potential. The index considers wind environments of both indoor and outdoor spaces.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗