Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material microstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Magnetic, dielectric, magnetoelectric, and microstructural studies demonstrating improved magnetoelectric sensitivity in three-phase BaTiO{sub 3}-CoFe{sub 2}O{sub 4}-poly(vinylidene-fluoride) composite

A three-phase BaTiO{sub 3}-CoFe{sub 2}O{sub 4}-poly(vinylidene-fluoride) (BT-CF-PVDF) particulate composite showing a maximum magnetoelectric voltage coefficient alpha{sub E33}approx26 mV/cm Oe, at a small applied magnetic field H{sub DC}=263 Oe, has been demonstrated in this work. Large magnetoelectric response in this composite (particulate BT-CF embedded in PVDF matrix) is possibly a result of the effective mechanical interaction between CF and BT through the PVDF matrix. Processing temperatures for composite preparation are low, ensuring no chemical reaction or interdiffusion between the atoms of piezoelectric and magnetostrictive phases, leading to large value of magnetoelectric voltage coefficient. Detailed measurements of dielectric, magnetic, and static magnetoelectric data are reported. Peak in the dielectric spectrum is shown to correlate with the buildup of magnetization in the composite. Although the M-H loop gives M{sub s}, M{sub r}, and H{sub c} (=37.2 emu/g, 16.4 emu/g, and 830 Oe, respectively) in accordance with the expected values (wt % of CF in the composite is 52.5%), the overall magnetic behavior of the composite is identified as 'spin glass'.

36 MATERIALS SCIENCE↗

Influence of the pore size in multi-walled carbon nanotubes on the hydrogen storage behaviors

Activated multi-walled carbon nanotubes (A-MWCNTs) were prepared using a chemical activation method to obtain well-developed pore structures for use as hydrogen storage materials. The microstructure and crystallinity of the A-MWCNTs were evaluated by X-ray diffraction and Fourier transform Raman spectroscopy. The textural properties of the A-MWCNTs were investigated by nitrogen gas sorption analysis at 77 K. The hydrogen storage capacity of the A-MWCNTs was evaluated at 77 K and 1 bar. The results showed that the specific surface area of the MWCNTs increased from 327 to 495 m{sup 2}/g as the activation temperature was increased. The highest hydrogen storage capacity was observed in the A-MWCNTs sample activated at 900 Degree-Sign C (0.54 wt%). This was attributed to it having the narrowest microporosity, which is a factor closely related to the hydrogen storage capacity. This shows that the hydrogen storage behaviors depend on the pore volume. Although a high pore volume is desirable for hydrogen storage, it is also severely affected if the pore size in the A-MWCNTs for the hydrogen molecules is suitable for creating the activation process. Highlights: Black-Right-Pointing-Pointer The AT-800 and AT-900 samples were prepared by a chemical activation method at activation temperature of 800 and 900 Degree-Sign C, respectively. Black-Right-Pointing-Pointer The AT-900 sample has the narrowest peak in comparison with the AT-800 sample, resulting from the overlap of the two peaks (Peak I and Peak II). Black-Right-Pointing-Pointer This overlapping effect is due to the newly created micropores or shrinkages of pores in Peak II. So, these determining characteristics are essential for designing materials that are suitable for molecular hydrogen storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure and oxidation behavior of high strength steel AISI 410 implanted with nitrogen ion

Surface treatment by implantation with nitrogen-ion was performed on the commercial feritic high strength steel AISI 410 which is termed for high temperature applications. The aim of this research was focused on the surface modification to improve its high temperature oxidation property in the early stages. Ion implantation was carried out at acceleration energy of 100 KeV and ion current 10 mA for 30, 60 and 90 minutes. The samples were subjected to the high temperature oxidation test by means of thermogravimetry in a magnetic suspension balance (MSB) at 500 °C for 5 hours. The scanning electron microscopy (SEM), X-ray diffraction spectrometry (XRD) and Vickers Hardness measurement were used for sample characterization. The formation of ferro-nitride phase after implantation did not occur, however a thin layer considered to contain nitrogen interstitials was detected. The oxidation of both samples before and after implantation followed parabolic kinetics indicating inward growth of oxide scale characteristically due to diffusion of oxygen anions towards matrix surface. After oxidation test relativelly stable oxide scales were observed. Oxidation rates decreased proportionally with the increasing of implantation time due to the formation of oxide layer which is considered to be effectiv inhibitor for the oxygen diffusion.

36 MATERIALS SCIENCE↗

Magnetic softness and high-frequency characteristics of Fe{sub 65}Co{sub 35}-O alloy films

The effects of oxygen concentration and film thickness were studied on the microstructural, electrical, and magnetic properties of Fe{sub 65}Co{sub 35}-O alloy films prepared by dc magnetron sputtering at room temperature. The films showed the best magnetic softness with a large saturation magnetization of 21.5 kG, low coercivities of 2.8 and 2.1 Oe in easy and hard axes, respectively, and a high resistivity of 2215 muOMEGA cm at an optimized condition of an oxygen gas flow ratio of 1.0% and a film thickness of 105 nm. Such an excellent magnetic softness can be attributed to grain refinement caused by the addition of very low dose of oxygen, which basically did not lead to the full formation of Fe and/or Co oxide phases with low saturation magnetizations. The microwave permeability measurement indicated that the addition of very low dose of oxygen could improve the response of real permeability to frequency. A high real permeability of 525 at frequency up to 1.2 GHz was obtained for the Fe{sub 65}Co{sub 35}-O films deposited at the optimized condition above.

36 MATERIALS SCIENCE↗

Isothermal oxidation behavior and microstructure of plasma surface Ta coating on γ-TiAl

The oxidation behavior of γ-TiAl with Ta surface coating fabricated by double glow plasma surface alloying technology was investigated by thermogravimetric method. Oxidation experiments were carried out at 750 °C and 850 °C in air for 100 h. The modification layer was comprised of deposition layer and diffusion layer, which metallurgically adhered to the substrate. Tantalum element decreased with the case depth. The oxidation morphology was studied by a scanning electron microscope and X-ray diffraction. The results highlighted that in the oxidizing process of the oxidation, the phase containing Ta-richer may restrain diffusing outward of the element Al in the matrix. Ti diffused outward, and formed the TiO{sub 2} scales, while the middle layer was rich in Al, and formed the continuous Al{sub 2}O{sub 3} scales after oxidation, which was effective to prevent further infiltration of oxygen atoms, and as a result the oxidation resistance increased immensely. - Highlights: • A Ta modified coating was prepared on γ-TiAl using DGP surface alloying technology. • The modification layer metallurgically adhered to the substrate. • The bonding force is about 60 N, satisfying the demands of practical use. • The oxidation resistance increased immensely at 750 °C and 850 °C.

36 MATERIALS SCIENCE↗

THE PUZZLE OF TWO DIFFERENT SUB-MICROMETER TUNGSTEN-RICH DEPOSITS IN BULK YBCO: ONE ACTS AS PINNING CENTERS AND THE OTHER DOES NOT

Two types of large grain YBCO samples doped with tungsten oxide, one with platinum and the other without, were produced using a slow cooling process. Observations of the trapped magnetic flux density showed that the flux density of the W-doped, Pt-free samples did not change with W doping levels of up to 2.1 mol%. In contrast, the (W+Pt)-doped samples resulted in a monotonic improvement in trapped magnetic flux density as a function of W doping. Microstructure studies indicate that both types of samples contain profuse sub-micrometer deposits of a W-rich compound. The Pt-free samples contain (W{sub 0.4}Y{sub 0.6})BaO{sub 3} deposits while the (W+Pt)-doped samples contain deposits of a (W{sub 0.5}Pt{sub 0.5})YBa{sub 2}O{sub 6} compound. Both types of deposits are of essentially the same size and have comparable number density. The results are strikingly similar to an earlier experiment in which uranium doped, Pt-free, large grain YBCO also did not show any improvement in trapped magnetic flux density. The U-doped, Pt-free samples contain profuse sub-micrometer deposits of a (U{sub 0.4}Y{sub 0.6})BaO{sub 3} compound, which have been shown to be ferromagnetic. The inability of both the (W{sub 0.4}Y{sub 0.6})BaO{sub 3} and (U{sub 0.4}Y{sub 0.6})BaO{sub 3} sub-micrometer deposits to act as pinning centers in self-field, suggest that this behavior is systematic.

36 MATERIALS SCIENCE↗

The effect of Nd substitution on the electrical properties of Bi{sub 3}NbTiO{sub 9} Aurivillius phase ceramics

The effect of Nd substitution on the microstructures and electrical properties of Aurivillius phase ferroelectric Bi{sub 3}NbTiO{sub 9}-based ceramics has been studied. All of the Bi{sub 3-x}Nd{sub x}NbTiO{sub 9} (0<=x<=1) ceramics are ferroelectrics. The Curie point T{sub C} decreased with increasing Nd doping content x. The Bi{sub 3-x}Nd{sub x}NbTiO{sub 9} ceramics exhibited a sharp ferroelectric-paraelectric phase transition at small x values (x<=0.6), whereas a diffuse phase transition was observed at higher x values (x>=0.8). Both the piezoelectric constant d{sub 33} and the dc electrical resistivity of Bi{sub 3}NbTiO{sub 9} ceramics were greatly enhanced by Nd substitution on the A sites. The improved properties can be attributed to the fact that Nd substitution depressed the generation of oxygen vacancies. A combination of high d{sub 33} values, high resistivity, and high T{sub C} points (>700 deg. C) suggests that the Bi{sub 3-x}Nd{sub x}NbTiO{sub 9} ceramics with x<=0.6 could be good candidates for high-temperature piezoelectric applications.

36 MATERIALS SCIENCE↗

Improved electrical properties of lead-free neodymium doped Ba0.85Ca0.15Zr0.1Ti0.9O3 piezoceramics

Highlights: • Ba{sub 0.85-x}Nd{sub x}Ca{sub 0.15}Zr{sub 0.1}Ti{sub 0.9}O{sub 3}(x = 0,0.005,0.01,0.015,0.02,0.025) ceramics prepared. • Ceramic with x = 0.01 is found to be a mixed phase of cubic and tetragonal phases. • All ceramics are relaxors with diffusivity (γ) increasing with increasing x. • Dielectric, ferroelectric, piezoelectric properties are optimized at x = 0.01. • The increased properties are attributed to crystal structure and microstructure. - Abstract: Lead-free Ba{sub (0.85-x)}Nd{sub x}Ca{sub 0.15}Zr{sub 0.1}Ti{sub 0.9}O{sub 3} (x = 0.000, 0.005, 0.010, 0.015, 0.020, and 0.025 mol%) ceramics were prepared following conventional solid state reaction route. Dielectric, ferroelectric and piezoelectric properties of the ceramics sintered at 1400 °C were studied. All the samples were found to be the relaxors with diffusivity lying in the range 1.58 ≤ γ ≤ 1.77. γ increases with increasing x. The spontaneous polarization (P{sub s}) increases to the maximum value of 8.65 μC/cm{sup 2} for x = 0.010, before it decreases with further increase in x. The remnant polarization (P{sub r}), which is ∼4.2 μC/cm{sup 2} for the undoped sample, increases with x to 4.8 μC/cm{sup 2} corresponding to x = 0.010 and then decreases with increasing x. The coercive field (E{sub c}) follows the opposite trend, showing a minimum of 2.052 kV/cm at x = 0.010. The piezoelectric charge coefficient (d{sub 33}) and electromechanical coupling factor (k{sub p}) peak at the high values of 275 pC/N and 0.36 respectively for the ceramics having the optimum Nd content of x = 0.010.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of cooling rate on the development of multiple generations of {gamma}' precipitates in a commercial nickel base superalloy

The compositional and microstructural evolution of different generations of {gamma}' precipitates during the continuous cooling of a commercial nickel base superalloy, Rene88DT, has been characterized by three dimensional atom probe tomography coupled with energy-filtered transmission electron microscopy studies. After solutionizing in the single {gamma} phase field, continuous cooling at a very high rate results in a monomodal size distribution of {gamma}' precipitates with a high nucleation density and non-equilibrium compositions. In contrast, a relatively slower cooling rate ({approx} 24 deg. C/min) results in a multi-modal size distribution of {gamma}' precipitates with the larger first generation primary precipitates exhibiting close to equilibrium composition, along with the smaller scale secondary {gamma}' precipitates, exhibiting non-equilibrium composition (excess of Co and Cr, depleted in Al and Ti). The composition of the {gamma} matrix near these precipitates also exhibits similar trends with the composition being closer to equilibrium near the primary precipitates as compared to the secondary precipitates. - Highlights: {yields} Effect of cooling rate on the precipitation of {gamma}' particles in commercial nickel base superalloy. {yields} Couples EFTEM and 3DAP studies to determine the composition and morphology of {gamma}' precipitates. {yields} Determination of near and far field compositional variations within the gamma matrix leading to subsequent precipitation.

36 MATERIALS SCIENCE↗

Novel Y doped Bi{sub 2}WO{sub 6} photocatalyst: Hydrothermal fabrication, characterization and enhanced visible-light-driven photocatalytic activity for Rhodamine B degradation and photocurrent generation

Visible-light-driven (VLD) Yttrium (Y) ion doped Bi{sub 2}WO{sub 6} photocatalyst has been synthesized via a facile hydrothermal route. Incorporation of Y{sup 3} {sup +} into Bi{sub 2}WO{sub 6} lattice was successfully confirmed by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and ICP analysis. The microstructure and optical property of the as-prepared samples have been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption–desorption isotherm and UV–vis diffuse reflectance spectra (DRS). The photocatalytic experiments indicated that the Y-Bi{sub 2}WO{sub 6} showed a much higher photocatalytic activity than the pristine Bi{sub 2}WO{sub 6} for the degradation of Rhodamine B (RhB) and photocurrent (PC) generation. This enhancement should be ascribed to the slightly increased band gap and the generated defects by Y{sup 3} {sup +} doping, thus resulting in a much lower recombination rate of the photoinduced electrons and holes. Such a process was verified by the photoluminescence (PL) spectroscopy. In addition, the active species trapping experiments indicated that holes (h{sup +}) and superoxide radicals (·O{sub 2}{sup −}) play important roles in the photocatalytic reaction. - Highlights: • Novel Y-Bi{sub 2}WO{sub 6} photocatalyst has been synthesized by a facile hydrothermal route. • Y-Bi{sub 2}WO{sub 6} exhibits a much higher photocatalytic activity than pristine Bi{sub 2}WO{sub 6}. • Holes (h{sup +}) and superoxide radicals (·O{sub 2}{sup −}) are the two main active species. • Y{sup 3} {sup +} ion can result in a low recombination of photogenerated electron and hole.

36 MATERIALS SCIENCE↗

Specific corrosion product on interior surface of a bronze wine vessel with loop-handle and its growth mechanism, Shang Dynasty, China

In this paper, a kind of specific stalactitic product was found on the interior surface of a covered bronze wine vessel with loop-handle (Chinese name is you), which was fabricated in Shang Dynasty (1700 B.C.-1100 B.C.) and now is collected in Xiaogan Museum, Hubei province of China. The microstructures of the product were characterized systematically by using optical microscopy, scanning electron microscope, transmission electron microscope, X-ray diffraction, and Raman microscopy. The experimental results revealed that the product belonged to a kind of malachite with high purity and high crystallinity. The growth of the product was considered to be a possible reason that the vessel was overly airtight within a museum display cabinet besides a lid of the vessel, which made the excess of H{sub 2}O and CO{sub 2} gas concentrations inside the vessel during long-term storage. This corrosion product is very harmful to bronze cultural relics, because of a large amount of copper consumption from the matrix which will reduce its life. The growth mechanism of the specific stalactitic product and the suggestions for preservation of the similar bronze relics in museum were proposed. - Highlights: Black-Right-Pointing-Pointer The stalactitic product was the high purity and good crystallinity malachite. Black-Right-Pointing-Pointer Its growth was related to the excess of H{sub 2}O and CO{sub 2} gas concentrations in museum. Black-Right-Pointing-Pointer It is harmful to the bronzes, because copper will be consumed from the matrix. Black-Right-Pointing-Pointer The suggestions for preservation of the similar bronzes in museum were proposed.

36 MATERIALS SCIENCE↗

Degradation of proton depth dose distributions attributable to microstructures in lung-equivalent material

Purpose: The purpose of the work reported here was to investigate the influence of sub-millimeter size heterogeneities on the degradation of the distal edges of proton beams and to validate Monte Carlo (MC) methods’ ability to correctly predict such degradation. Methods: A custom-designed high-resolution plastic phantom approximating highly heterogeneous, lung-like structures was employed in measurements and in Monte Carlo simulations to evaluate the degradation of proton Bragg curves penetrating heterogeneous media. Results: Significant differences in distal falloff widths and in peak dose values were observed in the measured and the Monte Carlo simulated curves compared to pristine proton Bragg curves. Furthermore, differences between simulations of beams penetrating CT images of the phantom did not agree well with the corresponding experimental differences. The distal falloff widths in CT image-based geometries were underestimated by up to 0.2 cm in water (corresponding to 0.8–1.4 cm in lung tissue), and the peak dose values of pristine proton beams were overestimated by as much as ~35% compared to measured curves or depth-dose curves simulated on the basis of true geometry. The authors demonstrate that these discrepancies were caused by the limited spatial resolution of CT images that served as a basis for dose calculations and lead to underestimation of the impact of the fine structure of tissue heterogeneities. A convolution model was successfully applied to mitigate the underestimation. Conclusions: The results of this study justify further development of models to better represent heterogeneity effects in soft-tissue geometries, such as lung, and to correct systematic underestimation of the degradation of the distal edge of proton doses.

60 APPLIED LIFE SCIENCES↗

Crystallization induced ordering of hard magnetic L1{sub 0} phase in melt-spun FeNi-based ribbons

The microstructure of newly developed hard magnetic Fe{sub 42}Ni{sub 41.3}Si{sub x}B{sub 12-x}P{sub 4}Cu{sub 0.7} (x = 2 to 8 at%) nanocrystalline alloy ribbons has been studied by transmission electron microscopy (TEM) and electron diffraction. A high-density polycrystalline grains, ∼30 nm in size, were formed in a ribbon after annealing at 673 K for 288 hours. Elemental mapping of the annealed specimen revealed the coexistence of three regions, Fe-rich, Ni-rich, and nearly equiatomic Fe-Ni, with areal fractions of 37%, 40%, and 23 %, respectively. The equiatomic L1{sub 0}-type ordered phase of FeNi was detected in between the Fe and Ni-rich phases. The presence of superlattice reflections in nanobeam electron diffraction patterns confirmed the formation of the hard magnetic L1{sub 0} phase beyond any doubt. The L1{sub 0} phase of FeNi was detected in alloys annealed in the temperature range of 673 to 813 K. The present results suggest that the order-disorder transition temperature of L1{sub 0} FeNi is higher than the previously reported value (593 K). The high diffusion rates of the constituent elements induced by the crystallization of an amorphous phase at relatively low temperature (∼673 K) are responsible for the development of atomic ordering in FeNi.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure, magnetic properties and exchange-coupling interactions for one-dimensional hard/soft ferrite nanofibers

SrFe{sub 12}O{sub 19} (SFO)/Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} (NZFO) composite ferrite nanofibers with diameters about 120 nm have been prepared by the electrospinning and calcination process. The SFO/NZFO composite ferrites are formed after calcined at 700 Degree-Sign C for 2 h and the composite nanofibers with various mass ratios obtained at 900 Degree-Sign C are fabricated from NZFO grains about 16-40 nm and SFO grains of 19-45 nm with a uniform phase distribution. With the SFO ferrite content increasing, the coercivity (H{sub c}) and remanence (M{sub r}) for the composite ferrite nanofibers initially increase, reaching maximum values of 379.8 kA/m (297 K) and 242.2 kA/m (77 K), 39.1 Am{sup 2}/kg (297 K) and 53.5 Am{sup 2}/kg (77 K), respectively, at a mass ratio (SFO:NZFO) of 4, and then show a reduction tendency with a further increase of the mass ratio. This enhancement in magnetic properties is attributed to the competition of the exchange-coupling interaction and the dipolar interaction in the composite nanofibers. - Graphical abstract: SrFe{sub 12}O{sub 19} (SFO)/Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} (NZFO) composite ferrite nanofibers with a uniform phase distribution show competition of the exchange-coupling interaction and the dipolar interaction in the composite nanofibers. Highlights: Black-Right-Pointing-Pointer Composite ferrite nanofibers have been prepared by the electrospinning. Black-Right-Pointing-Pointer Magnetic exchange-coupling interaction for these nanofibers were analyzed. Black-Right-Pointing-Pointer Nanofibers magnetic properties measured at 297 K and 77 K were discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ca Addition Effects on the Microstructure, Tensile and Corrosion Properties of Mg Matrix Alloy Containing 8 wt.% Mg{sub 2}Si

The microstructure, tensile properties and corrosion behavior of the Mg-8 wt.% Mg{sub 2}Si-x%Ca alloy have been studied by the use of optical microscopy, scanning electron microscopy equipped with energy-dispersive spectroscopy, x-ray diffraction, standard tensile testing, polarization test and electrochemical impedance spectroscopy (EIS) measurements. Microstructural studies indicated that Ca modifies both primary and eutectic Mg{sub 2}Si phase. It was found that the average size of primary Mg{sub 2}Si particles is about 60 μm, which is dropped by about 82% in the alloy containing 0.05 wt.% Ca. By the addition of different Ca contents, Ca-rich intermetallics (i.e., CaSi{sub 2} and CaMgSi) were formed. The modification mechanism of adding Ca during solidification was found to be due to the strong effect of CaMgSi phase as a heterogonous nucleation site, apart from CaSi{sub 2} which was reported before, for Mg{sub 2}Si intermetallics. Tensile testing results ascertained that Ca addition enhances both ultimate tensile strength (UTS) and elongation values. The optimum amount of Ca was found to be 0.1 wt.%, which improved UTS and elongation values from about 130 MPa and 2% to 165 MPa and 5.5%, whereas more Ca addition (i.e., 3 wt.%) reduced the tensile properties of the alloy to about 105 MPa and 1.8%, which can be due to the formation of CaMgSi intermetallics with deteriorating needle-like morphology. Polarization and EIS tests also showed that the Mg-3%Si-0.5%Ca alloy pronounces as the best anti-corrosion alloy. Nevertheless, further added Ca (up to 3 wt.%) deteriorated the corrosion resistance due to predominance of worse galvanic coupling effect stemmed from the presence of stronger CaMgSi cathode in comparison with Mg{sub 2}Si. With higher Ca additions, an adverse effect was seen on corrosion resistance of the Mg-3%Si alloy, as a result of forming a weak film on the alloy specimen surface.

36 MATERIALS SCIENCE↗

Tribological properties of self-lubricating NiAl/Mo-based composites containing AgVO{sub 3} nanowires

Silver vanadate (AgVO{sub 3}) nanowires were synthesized by hydrothermal method and self-lubricating NiAl/Mo-AgVO{sub 3} composites were fabricated by powder metallurgy technique. The composition and microstructure of NiAl/Mo-based composites were characterized and the tribological properties were investigated from room temperature to 900 °C. The results showed that NiAl/Mo-based composites were consisted of nanocrystalline B2 ordered NiAl matrix, Al{sub 2}O{sub 3}, Mo{sub 2}C, metallic Ag and vanadium oxide phase. The appearance of metallic Ag and vanadium oxide phase can be attributed to the decomposition of AgVO{sub 3} during sintering. Wear testing results confirmed that NiAl/Mo-based composites have excellent tribological properties over a wide temperature range. For example, the friction coefficient and wear rate of NiAl/Mo-based composites containing AgVO{sub 3} were significantly lower than the composites containing only metallic Mo or AgVO{sub 3} lubricant when the temperature is above 300 °C, which can be attributed to the synergistic lubricating action of metallic Mo and AgVO{sub 3} lubricants. Furthermore, Raman results indicated that the composition on the worn surface of NiAl-based composites was self-adjusted after wear testing at different temperatures. For example, Ag{sub 3}VO{sub 4} and Fe{sub 3}O{sub 4} lubricants were responsible for the improvement of tribological properties at 500 °C, AgVO{sub 3}, Ag{sub 3}VO{sub 4} and molybdate for 700 °C, and AgVO{sub 3} and molybdate for 900 °C of NiAl-based composites with the addition of metallic Mo and AgVO{sub 3}. - Highlights: • NiAl/Mo-AgVO{sub 3} nanocomposites were prepared by mechanical alloying and sintering. • AgVO{sub 3} decomposed to metallic Ag and vanadium oxide during the sintering process. • NiAl/Mo-AgVO{sub 3} exhibited superior tribological properties at a board temperature range. • Phase composition on the worn surface was varied with temperatures. • Self-adjusted action was responsible for the improvement of tribological properties.

36 MATERIALS SCIENCE↗

Experimental and Computational Studies of Stress Corrosion Cracking of Alloys 308/309 and 82/182 Weldments in Corrosive and Radiation Environment

The goal of the project was to determine factors that influence SCC and IASCC in weldments found in LWR nuclear power plants. We focused on a SA508-304L SS weldment fabricated by EPRI using gas tungsten arc welding and used an aggressive BWR normal water chemistry (NWC) immersion environment. This weldment used 309L butter and 308L groove filler material. The microstructure of the 309L butter was non-uniform, exhibiting a 20–30μm thick martensitic layer closest to the SA508 interface, a 1–4 mm thick single γ austenite phase dilution zone, and a γ–δ duplex region extending to the 308L groove filler. The 308L groove filler had an entirely γ–δ duplex microstructure. Two approximately 1-inch thick 304L and SA508 plates approximately 12 by 6 square inches were joined using standard nuclear grade welding techniques. This included a post weld heat treatment of the 309L butter after application, a 0.32 cm fit-up root opening, and 57 bead lines of 308L groove filler applied in 18 layers. A 60 degree weld bevel angle was used and the 309L butter was 1.5 cm thick. Displacement cascade damage was induced using proton irradiation at the Michigan Ion Beam Laboratory. The incident proton energy was 2 MeV, the sample temperature was 360 ºC, and the calculated dpa value at 10 μm (60% of the Bragg peak depth of ~18 μm) was 5 dpa using the quick Kinchin-Pease model. Proton irradiation to this damage level required approximately 125 hours of beam time. Two types of samples were irradiated, tensile specimens and TEM bars. Samples were selected from all regions of the weldment, including the SA508-309L butter interface, the 309L-308L interface, and 308L-304L interface. The stainless steel alloys (304L, 308L, and 309L) within the heat affected zone are characterized by a duplex skeletal morphology of δ-ferrite and γ-austenite resulting from the recrystallization associated with weld fabrication. Approximately 7 to 8 mm of length along the specimen was irradiated. The gauge volume surfaces were mechanically polished and then electro-polished to remove mechanical damage from the mechanical polishing step prior to irradiation. Immersion tests were performed in a recirculating autoclave under BWR NWC conditions (2000 ppb wt. dissolved oxygen, neutral pH, 288 ºC, 10 MPa, and inlet water conductivity <100 nS/cm) to accelerate corrosion. Constant strain rate tests were performed either to failure or to approximately 5% strain. Strain rates of 10 -7 to 10 -6 mm/mm/s were used and typical immersion testing required four to six weeks to achieve failure or strains near 5%. Analysis primarily used advanced electron microscopy techniques of FIB lift out specimens.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Iron-rich permanent magnet

The disclosure is directed to an iron-nitride material having a polycrystalline microstructure including a plurality of elongated crystallographic grains with grain boundaries, the iron-nitride material including at least one of an α″-Fe16N2 phase and a body-center-tetragonal (bct) phase comprising Fe and N. The disclosure is also directed a method producing an iron-nitride material. The method includes some combinations of preparing a raw material comprising iron, carrying out a microstructure build-up by annealing the prepared raw material at an elevated temperature and subsequently quenching the prepared raw material to produce a microstructure build-up material, annealing the microstructure build-up material, reducing the microstructure build-up material in a hydrogen environment, nitriding the reduced material to produce a nitrided material and subsequently quenching the nitrided material to a martensitic transformation temperature, stress annealing the nitrided material, and magnetic field annealing the stress-annealed material.

Wang, Jian-Ping↗