Search NASA⌕ Search

SEARCH · Search NASA

Results for “Navier Stokes algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A streamwise upwind algorithm applied to vortical flow over a delta wing

Improvements have been made to a streamwise upwind algorithm so that it can be used for calculating flows with vortices. A calculation is shown of flow over a delta wing at an angle of attack. The laminar, thin-layer, Navier-Stokes equations are used for the calculation. The results are compared with another upwind method, a central-differencing method, and experimental data. The present method shows improvements in accuracy and convergence properties.

Goorjian, Peter M.↗
NASA NTRS1992

Comparison between the PISO algorithm and preconditioning methods for compressible flow

Two widely used family of algorithms, pressure-based and density-based methods, have been developed for computational fluid dynamics (CFD) problems over the years. Pressure-based methods (such as SIMPLE and PISO) use a Poisson-like equation for updating pressure instead of the continuity equation, while density-based methods use the continuity equation to update density (an equation of state is used to provide density in pressure based schemes and pressure in density based schemes). Pressure-based methods were developed originally for incompressible flows at low Reynolds numbers and were then extended to high Reynolds numbers and compressible applications. On the other hand, density based methods were originally developed for transonic flows and have been extended down to low Mach numbers through the use of preconditioning techniques. We compare these two very different approaches to solving the Navier-Stokes equations in order to gain an understanding of their similarities and differences. Specifically, we consider the PISO scheme as a representative pressure-based method and contrast it with a recently developed preconditioning scheme. We also compare the relative performance of the PISO algorithm with a Euler implicit algorithm that is employed to solve the preconditioned equations by means of a vector stability analysis.

Merkle, Charles L.↗
NASA NTRS1987

A Navier-Stokes flow simulation of the Space Shuttle Main Engine Hot Gas Manifold

Incompressible viscous flow inside the turnaround duct, the fuel bowl, the transfer duct and the racetrack of the Space Shuttle Main Engine (SSME) Hot Gas Manifold (HGM) has been computed using the method of pseudo-compressibility together with an implicit, approximate-factorization algorithm. A multiple-zone method is used to make solution of flows in complex geometries easy. A model which predicts the pressure loading for the shield and the injector post arrangement without solving the complex flow field in the main injector region is proposed. The computed results show good qualitative agreement with experimental data.

Yang, Ruey-Jen↗
NASA NTRS1981

Navier-Stokes solutions for nonaxisymmetric nozzle flows

The compressible Navier-Stokes equations for two-dimensional and three-dimensional flow are solved for nonaxisymmetric nozzle configurations. Both internal flow alone and combined internal and external flow cases are considered. An implicit approximate factorization algorithm is employed to solve the governing equations which are cast in terms of a body-fitted coordinate system. Turbulence closure is accomplished with a composite algebraic model. Two-dimensional results for a wedge plug nozzle flow in the form of surface pressures compare favorably with experimental data. Three-dimensional calculations for two nonaxisymmetric nozzles are also presented and compared with data.

Swanson, R. C.↗
NASA NTRS1984

Simulation of transonic separated airfoil flow by finite difference viscous-inviscid interaction

A finite difference viscous inviscid interaction program has been developed for simulating the separated transonic flow about lifting airfoils, including the wake. In contrast to most interaction programs, this code combines a finite difference boundary layer algorithm with the inviscid program. The recently developed finite difference boundary layer code efficiently simulates attached and reversed compressible boundary layer and wake flows. New viscous inviscid interaction algorithms were also developed to couple the boundary layer code with the inviscid transonic full potential program. Transonic cases with shock induced and trailing edge separation are computed and compared with experimental and Navier-Stokes results.

Vandalsem, W. R.↗
NASA NTRS1985

Numerical solution of transonic wing flows using an Euler/Navier-Stokes zonal approach

Transonic flow fields about wing geometries are computed using an Euler/Navier-Stokes approach in which the flow field is divided into several zones. The grid zones immediately adjacent to the wing surface are suitably clustered and solved with the Navier-Stokes equations. Grid zones removed from the wing are less finely clustered and are solved with the Euler equations. Wind tunnel wall effects are easily and accurately modeled with the new grid-zoning algorithm because the wind tunnel grid is constructed as an exact subset of the corresponding free-air grid. Solutions are obtained that are in good agreement with experiment, including cases with significant wind tunnel wall effects and shock-induced separation on the upper wing surface.

Holst, T. L.↗
NASA NTRS1988

Numerical simulation of axisymmetric turbulent flow in combustors and diffusors

A method for predicting turbulent flow in combustors and diffusers is developed. The Navier-Stokes equations, incorporating a turbulence kappa-epsilon model equation, were solved in a nonorthogonal curvilinear coordinate system. The solution applied the finite volume method to discretize the differential equations and utilized the SIMPLE algorithm iteratively to solve the differenced equations. A zonal grid method, wherein the flow field was divided into several subsections, was developed. This approach permitted different computational schemes to be used in the various zones. In addition, grid generation was made a more simple task. However, treatment of the zonal boundaries required special handling. Boundary overlap and interpolating techniques were used and an adjustment of the flow variables was required to assure conservation of mass, momentum and energy fluxes. The numerical accuracy was assessed using different finite differencing methods, i.e., hybrid, quadratic upwind and skew upwind, to represent the convection terms. Flows in different geometries of combustors and diffusers were simulated and results compared with experimental data and good agreement was obtained.

Yung, Chain Nan↗
NASA NTRS1991

Two-species variable gamma formulation for a forward-firing rocket nozzle

The object of the paper is to develop an algorithm for an axisymmetric case to study the effects of variable gamma on the flowfield of a two-species mixture. This algorithm forms the basis for extension to three-dimensional SSME application where the Shuttle executes a return-to-launch-site maneuver. The PARC2DR code was used as the foundation for the Navier-Stokes solver, and the species continuity equation for the exhaust species was coupled in an explicit fashion to the Navier-Stokes equation via the variable gamma. The species continuity equation could not be solved with explicit boundary conditions; instead, implicit boundary conditions were implemented.

Saladino, Anthony J.↗
NASA NTRS1992

Large eddy simulation of compressible turbulent channel flows

The development of turbulence within rocket propulsion chamber flows remains a difficult problem to predict. Within solid propellant rockets, the flow can exhibit multiple regions of transition to turbulence, and is susceptible to various modes of aero-acoustic interaction. The objective is to formulate, develop, and validate, a large eddy simulation (LES) method for compressible channel flows. The LES method separates the resolvable scale motions from the unresolvable scales by applying a spatial filter to the compressible Navier-Stokes equations. The equations are solved numerically using a modified four-step Runge-Kutta procedure in time and second or fourth order finite differences in space. The current simulations have validated the algorithm in the incompressible limit and have demonstrated the ability of the method to simulate high subsonic Mach number flows.

Beddini, Robert A.↗
NASA NTRS2010

Algorithm for Stabilizing a POD-Based Dynamical System

This algorithm provides a new way to improve the accuracy and asymptotic behavior of a low-dimensional system based on the proper orthogonal decomposition (POD). Given a data set representing the evolution of a system of partial differential equations (PDEs), such as the Navier-Stokes equations for incompressible flow, one may obtain a low-dimensional model in the form of ordinary differential equations (ODEs) that should model the dynamics of the flow. Temporal sampling of the direct numerical simulation of the PDEs produces a spatial time series. The POD extracts the temporal and spatial eigenfunctions of this data set. Truncated to retain only the most energetic modes followed by Galerkin projection of these modes onto the PDEs obtains a dynamical system of ordinary differential equations for the time-dependent behavior of the flow. In practice, the steps leading to this system of ODEs entail numerically computing first-order derivatives of the mean data field and the eigenfunctions, and the computation of many inner products. This is far from a perfect process, and often results in the lack of long-term stability of the system and incorrect asymptotic behavior of the model. This algorithm describes a new stabilization method that utilizes the temporal eigenfunctions to derive correction terms for the coefficients of the dynamical system to significantly reduce these errors.

Kalb, Virginia L.↗
NASA NTRS1985

Finite element algorithms for compressible flow computation on a supercomputer

Methods of applying computational fluid dynamics techniques to engineering problems are discussed. The linking factors between theoretical and applied research are the shape and weight functions which produce the Galerkin finite element schemes. The flow is unsteady, viscous, heat conducting and compressible, and steady-state flows are the asymptotic limit of unsteady flows. All flows are described by the time-averaged Navier-Stokes equations (NSE) with mass and energy conservation. Local curvilinear intrinsic coordinates are applied to discretize the NSE in arbitrary geometric domains. A modified weighted residuals approach defines the discrete analogs of the physical systems modeled and a general interpolants method is used to derive families of numerical models, both implicit and explicit, finite difference and finite elemnt, from a single point of departure. Time-dependent element approximations are achieved with a progressive assembly of generalized elements method. Hyperbolic steady-state Euler algorithms and quasi-parabolic are spatial marching algorithms for solving the discretized equations. Application of the techniques is illustrated through calculation of the compressible flow around a hypersonic flight vehicle at 100,000 ft at zero angle of attack at speeds of Mach 4-10.

Spradley, L. W.↗
DOE OSTI2021

Beyond Taylor’s hypothesis: a novel volumetric reconstruction of velocity and density fields for variable‑density and shear flows

Abstract This work presents a novel numerical procedure for reconstructing volumetric density and velocity fields from planar laser-induced fluorescence (PLIF) and stereoscopic particle image velocimetry (SPIV) data. This new method is theoretically and practically demonstrated to provide more accurate 3D vortical structures and density fields in high shear flows than reconstruction methods based on the mean convective velocity. While Taylor’s hypothesis of frozen turbulence is commonly applied by using the local mean streamwise velocity, the proposed algorithm uses the measured local instantaneous velocity for data convection. It consists of a step-by-step reconstruction based on a mixed Lagrangian–Eulerian solver that includes the 3D interpolation of scattered flow data and that relaxes the Taylor’s hypothesis by iterative enforcement of the incompressibility constraint on the velocity field. This methodology provides 3D fields with temporal resolution, spatial resolution, and accuracy comparable to that of real 3D snapshots, thus providing a practical alternative to tomographic measurements. The procedure is validated using numerical data of the constant-density channel flow available on the Johns Hopkins University Turbulence Database (JHTDB), showing the accurate reconstruction of the 3D velocity field. The algorithm is applied to an experimental dataset of PLIF and SPIV measurements of a variable-density jet flow, demonstrating its capability to provide 3D velocity and density fields that are more consistent with the Navier–Stokes equations compared to the mean flow convective method. Graphic abstract

42 ENGINEERING↗
NASA NTRS1984

An efficient approximate factorization implicit scheme for the equations of gasdynamics

An efficient implicit finite-difference algorithm for the gas dynamic equations utilizing matrix reduction techniques is presented. A significant reduction in arithmetic operations is achieved while maintaining the same favorable stability characteristics and generality found in the Beam and Warming approximate factorization algorithm. Steady-state solutions to the conservative Euler equations in generalized coordinates are obtained for transonic flows about a NACA 0012 airfoil. The theoretical extension of the matrix reduction technique to the full Navier-Stokes equations in Cartesian coordinates is presented in detail. Linear stability, using a Fourier stability analysis, is demonstrated and discussed for the one-dimensional Euler equations. It is shown that the method offers advantages over the conventional Beam and Warming scheme and can retrofit existing Beam and Warming codes with minimal effort.

Barth, T. J.↗
NASA NTRS1991

Computation of three-dimensional flows using two stream functions

An approach to compute 3-D flows using two stream functions is presented. The method generates a boundary fitted grid as part of its solution. Commonly used two steps for computing the flow fields are combined into a single step in the present approach: (1) boundary fitted grid generation; and (2) solution of Navier-Stokes equations on the generated grid. The presented method can be used to directly compute 3-D viscous flows, or the potential flow approximation of this method can be used to generate grids for other algorithms to compute 3-D viscous flows. The independent variables used are chi, a spatial coordinate, and xi and eta, values of stream functions along two sets of suitably chosen intersecting stream surfaces. The dependent variables used are the streamwise velocity, and two functions that describe the stream surfaces. Since for a 3-D flow there is no unique way to define two sets of intersecting stream surfaces to cover the given flow, different types of two sets of intersecting stream surfaces are considered. First, the metric of the (chi, xi, eta) curvilinear coordinate system associated with each type is presented. Next, equations for the steady state transport of mass, momentum, and energy are presented in terms of the metric of the (chi, xi, eta) coordinate system. Also included are the inviscid and the parabolized approximations to the general transport equations.

Greywall, Mahesh S.↗
NASA NTRS1992

Two-dimensional unstructured triangular grid generation

The capability of generating 2-D unstructured triangular meshes about arbitrary geometries is demonstrated. This work uses a distribution of boundary points and triangulates the computational domain using a Delaunay triangulation algorithm. Typically, initial cells are added based on cell aspect ratios or cell areas. A resulting mesh can then be used along with the connectivity of the cells to solve either a Euler or Navier-Stokes flow problem.

Jorgenson, Philip C. E.↗
NASA NTRS1993

The addition of algebraic turbulence modeling to program LAURA

The Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) is modified to allow the calculation of turbulent flows. This is accomplished using the Cebeci-Smith and Baldwin-Lomax eddy-viscosity models in conjunction with the thin-layer Navier-Stokes options of the program. Turbulent calculations can be performed for both perfect-gas and equilibrium flows. However, a requirement of the models is that the flow be attached. It is seen that for slender bodies, adequate resolution of the boundary-layer gradients may require more cells in the normal direction than a laminar solution, even when grid stretching is employed. Results for axisymmetric and three-dimensional flows are presented. Comparison with experimental data and other numerical results reveal generally good agreement, except in the regions of detached flow.

Cheatwood, F. Mcneil↗
NASA NTRS1994

Preconditioned conjugate gradient methods for the Navier-Stokes equations

A preconditioned Krylov subspace method (GMRES) is used to solve the linear systems of equations formed at each time-integration step of the unsteady, two-dimensional, compressible Navier-Stokes equations of fluid flow. The Navier-Stokes equations are cast in an implicit, upwind finite-volume, flux-split formulation. Several preconditioning techniques are investigated to enhance the efficiency and convergence rate of the implicit solver based on the GMRES algorithm. The superiority of the new solver is established by comparisons with a conventional implicit solver, namely line Gauss-Seidel relaxation (LGSR). Computational test results for low-speed (incompressible flow over a backward-facing step at Mach 0.1), transonic flow (trailing edge flow in a transonic turbine cascade), and hypersonic flow (shock-on-shock interactions on a cylindrical leading edge at Mach 6.0) are presented. For the Mach 0.1 case, overall speedup factors of up to 17 (in terms of time-steps) and 15 (in terms of CPU time on a CRAY-YMP/8) are found in favor of the preconditioned GMRES solver, when compared with the LGSR solver. The corresponding speedup factors for the transonic flow case are 17 and 23, respectively. The hypersonic flow case shows slightly lower speedup factors of 9 and 13, respectively. The study of preconditioners conducted in this research reveals that a new LUSGS-type preconditioner is much more efficient than a conventional incomplete LU-type preconditioner.

Ajmani, Kumud↗
NASA NTRS1996

CFD Analysis of the 24-inch JIRAD Hybrid Rocket Motor

A series of multispecies, multiphase computational fluid dynamics (CFD) analyses of the 24-inch diameter joint government industry industrial research and development (JIRAD) hybrid rocket motor is described. The 24-inch JIRAD hybrid motor operates by injection of liquid oxygen (LOX) into a vaporization plenum chamber upstream of ports in the hydroxyl-terminated polybutadiene (HTPB) solid fuel. The injector spray pattern had a strong influence on combustion stability of the JIRAD motor so a CFD study was initiated to define the injector end flow field under different oxidizer spray patterns and operating conditions. By using CFD to gain a clear picture of the flow field and temperature distribution within the JIRAD motor, it is hoped that the fundamental mechanisms of hybrid combustion instability may be identified and then suppressed by simple alterations to the oxidizer injection parameters such as injection angle and velocity. The simulations in this study were carried out using the General Algorithm for Analysis of Combustion SYstems (GALACSY) multiphase combustion codes. GALACSY consists of a comprehensive set of droplet dynamic submodels (atomization, evaporation, etc.) and a computationally efficient hydrocarbon chemistry package built around a robust Navier-Stokes solver optimized for low Mach number flows. Lagrangian tracking of dispersed particles describes a closely coupled spray phase. The CFD cases described in this paper represent various levels of simplification of the problem. They include: (A) gaseous oxygen with combusting fuel vapor blowing off the walls at various oxidizer injection angles and velocities, (B) gaseous oxygen with combusting fuel vapor blowing off the walls, and (C) liquid oxygen with combusting fuel vapor blowing off the walls. The study used an axisymmetric model and the results indicate that the injector design significantly effects the flow field in the injector end of the motor. Markedly different recirculation patterns are observed in the vaporization chamber as the oxygen velocity and/or spray pattern is varied. The ability of these recirculation patterns to stabilize the diffusion flame above the surface of the solid fuel gives a plausible explanation for the experimentally determined combustion stability characteristics of the JIRAD motor, and suggests how combustion stability can be assured by modifications to the injector design.

Liang, Pak-Yan↗