<investigation of control in man-machine systems with emphasis on problems of remote manipulation< progress report, 1 aug. 1964 - 31 jan. 1965
Path optimization for numerically controlled remote manipulator - man-machine system
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Path optimization for numerically controlled remote manipulator - man-machine system
Local error control for optimization of numerical integration orbit calculation techniques
Compilation of technical papers in guidance theory, optimization theory, numerical methods, and celestial mechanics
A multiple-impulse function is represented as a sequence of single-impulse functions. The single-impulse transfer which yields the velocity change required to transfer from a specified initial orbit to a partially specified final orbit is developed. Analytic derivatives of the function are obtained for use in optimization techniques. A four-impulse transfer is outlined. The analytic derivatives may allow more efficient optimization than numerical derivatives do.
A new mechanization of the Kalman updating algorithm based on a U-D factorization of the estimate error covariance is introduced. Efficient and stable updating recursions are developed for the unit upper triangular factor U and the diagonal factor D, treating only the parameter estimation problem. Properties of the factorization update performed here include efficient one point at a time processing that requires little more computation than the optimal but numerically unstable conventional Kalman measurement update algorithm, and stability that compares with the square root filter.
An important but relatively uninvestigated problem in remote sensing is the inversion of vegetative canopy reflectance models to obtain agrophysical parameters, given measured reflectances. The problem is here formally defined and its solution outlined. Numerical nonlinear optimization techniques are used to implement this inversion to obtain the leaf area index using Suits' canopy reflectance model. The results for a variety of cases indicate that this can be done successfully using infrared reflectances at different views or azimuth angles or a combination thereof. The other parameters of the model must be known, although reasonable measurement errors can be tolerated without seriously degrading the accuracy of the inversion. The application of the technique to ground based remote-sensing experiments is potentially useful, but is limited to the degree to which the canopy reflectance model can accurately predict observed reflectances.
An optimal active noise controller is formulated and analyzed for three different active noise control problems. The first problem formulated is the active control of enclosed or partially enclosed harmonic sound fields where the noise source strengths and enclosure boundary description are known. The enclosure boundary is described by either pressure, velocity, or impedance boundary conditions. The second problem formulated is the active control of the free field power radiated from a distributed noise source with a known time harmonic surface velocity. The third problem formulated is the active control of enclosed or partially enclosed harmonic sound field where the noise source strengths of enclosure boundary description may not be known. All three formulations are derived using an indirect boundary element technique. Formulation and verification of an indirect boundary element method is presented. The active noise controller formulations for enclosures are capable of analyzing systems with generalized enclosure shapes, point noise sources, and/or locally reacting impedance boundary conditions. For each formulation, representative results of optimal active noise controller case studies are presented, and some general conclusions are drawn.
The problem is that of finding among all polynomials of degree at most n and normalized to be 1 at c the one with minimal uniform norm on Epsilon. Here, Epsilon is a given ellipse with both foci on the real axis and c is a given real point not contained in Epsilon. Problems of this type arise in certain iterative matrix computations and, in this context, it is generally believed and widely referenced that suitably normalized Chebyshev polynomials are optimal for such constrained approximation problems. It is shown that this is not true in general. Moreover, sufficient conditions are derived which guarantee that Chebyshev polynomials are optimal. Some numerical examples are also presented.
Robotics is a promising technology for assembly, servicing, and maintenance of platforms in space. Several aspects of planning and guidance for telesupervised and fully autonomous robotic servicers are investigated. Guidance algorithms for proximity operation of a free flyer are described. Numeric trajectory optimization is combined with artificial intelligence based obstacle avoidance. An initial algorithm and the results of its simulating platform servicing scenario are discussed. A second algorithm experiment is then proposed.
The effectiveness of viscous elements in introducing damping in a structure is a function of several variables, including their number, their location in the structure, and their physical properties. In this paper several optimization problems are posed to optimize these variables. The paper investigates various metrics to define the optimization problem, and compares the damping profiles that are obtained. Both discrete and continuous optimization problems are formulated and solved, corresponding, respectively, to the problems of placement of damping elements and to the tuning of their parameters. The paper particularly emphasizes techniques to make feasible the large scale problems resulting from the optimization formulations. Numerical results involving a lightly damped tested structure are presented.
In this note we formulate image segmentation as a clustering problem. Feature vectors extracted from a raw image are clustered into subregions, thereby segmenting the image. A fuzzy generalization of a Kohonen learning vector quantization (LVQ) which integrates the Fuzzy c-Means (FCM) model with the learning rate and updating strategies of the LVQ is used for this task. This network, which segments images in an unsupervised manner, is thus related to the FCM optimization problem. Numerical examples on photographic and magnetic resonance images are given to illustrate this approach to image segmentation.
The effectiveness of viscous elements in introducing damping in a structure is a function of several variables including their number, their location in the structure, and their physical properties. In this paper, the optimal damper placement and tuning problem is posed to optimize these variables. Both discrete and continuous optimization problems are formulated and solved corresponding, respectively, to the problems of placement of passive elements and to the tuning of their parameters. The paper particularly emphasizes the critical computational issues resulting from the optimization formulations. Numerical results involving a lightly damped testbed structure are presented.
The derivation of storage explicit Runge-Kutta (ERK) schemes has been performed in the context of integrating the compressible Navier-Stokes equations via direct numerical simulation. Optimization of ERK methods is done across the broad range of properties, such as stability and accuracy efficiency, linear and nonlinear stability, error control reliability, step change stability, and dissipation/dispersion accuracy, subject to varying degrees of memory economization. Following van der Houwen and Wray, 16 ERK pairs are presented using from two to five registers of memory per equation, per grid point and having accuracies from third- to fifth-order. Methods have been assessed using the differential equation testing code DETEST, and with the 1D wave equation. Two of the methods have been applied to the DNS of a compressible jet as well as methane-air and hydrogen-air flames. Derived 3(2) and 4(3) pairs are competitive with existing full-storage methods. Although a substantial efficiency penalty accompanies use of two- and three-register, fifth-order methods, the best contemporary full-storage methods can be pearl), matched while still saving two to three registers of memory.
We propose a novel discontinuous mixed finite element formulation for the solution of second-order elliptic problems. Fully discontinuous piecewise polynomial finite element spaces are used for the trial and test functions. The discontinuous nature of the test functions at the element interfaces allows to introduce new boundary unknowns that, on the one hand enforce the weak continuity of the trial functions, and on the other avoid the need to define a priori algorithmic fluxes as in standard discontinuous Galerkin methods. Static condensation is performed at the element level, leading to a solution procedure based on the sole interface unknowns. The resulting family of discontinuous dual-primal mixed finite element methods is presented in the one and two-dimensional cases. In the one-dimensional case, we show the equivalence of the method with implicit Runge-Kutta schemes of the collocation type exhibiting optimal behavior. Numerical experiments in one and two dimensions demonstrate the order accuracy of the new method, confirming the results of the analysis.
Propellant loading from the Storage Tank to the External Tank is one of the very important and time consuming pre-launch ground operations for the launch vehicle. The propellant loading system is a complex integrated system involving many physical components such as the storage tank filled with cryogenic fluid at a very low temperature, the long pipe line connecting the storage tank with the external tank, the external tank along with the flare stack, and vent systems for releasing the excess fuel. Some of the very important parameters useful for design purpose are the prediction of pre-chill time, loading time, amount of fuel lost, the maximum pressure rise etc. The physics involved for mathematical modeling is quite complex due to the fact the process is unsteady, there is phase change as some of the fuel changes from liquid to gas state, then conjugate heat transfer in the pipe walls as well as between solid-to-fluid region. The simulation is very tedious and time consuming too. So overall, this is a complex system and the objective of the work is student's involvement and work in the parametric study and optimization of numerical modeling towards the design of such system. The students have to first become familiar and understand the physical process, the related mathematics and the numerical algorithm. The work involves exploring (i) improved algorithm to make the transient simulation computationally effective (reduced CPU time) and (ii) Parametric study to evaluate design parameters by changing the operational conditions
Fast muon beam six dimensional (6D) phase space cooling is essential for muon colliders. The Helical Cooling Channel (HCC) uses hydrogen-pressurized RF cavities imbedded in a magnet system with solenoid, helical dipole, and helical quadrupole components that provide the continuous dispersion needed for emittance exchange and effective 6D beam cooling. A series of HCC segments, each with sequentially smaller aperture, higher magnetic field, and higher RF frequency to match the beam size as it is cooled, has been optimized by numerical simulation to achieve a factor of 105 emittance reduction in a 300 m long channel with only a 40% loss of beam. Conceptual designs of the hardware required for this HCC system and the status of the RF studies and HTS helical solenoid magnet prototypes are described.
This paper describes major improvements to the computational infrastructure of the CTF sub-channel code so that full-core sub-channel-resolved simulations can now be performed in much shorter run-times, either in stand-alone mode or as part of coupled-code multi-physics calculations. These improvements support the goals of the Department Of Energy (DOE) Consortium for Advanced Simulations of Light Water (CASL) Energy Innovation Hub to develop high fidelity multi-physics simulation tools for nuclear energy design and analysis. A set of serial code optimizations--including fixing computational inefficiencies, optimizing the numerical approach, and making smarter data storage choices--are first described and shown to reduce both execution time and memory usage by about a factor of ten. Next, a Single Program Multiple Data (SPMD) parallelization strategy targeting distributed memory Multiple Instruction Multiple Data (MIMD) platforms and utilizing domain-decomposition is presented. In this approach, data communication between processors is accomplished by inserting standard MPI calls at strategic points in the code. The domain decomposition approach implemented assigns one MPI process to each fuel assembly, with each domain being represented by its own CTF input file. The creation of CTF input files, both for serial and parallel runs, is also fully automated through use of a pre-processor utility that takes a greatly reduced set of user input over the traditional CTF input file. To run CTF in parallel, two additional libraries are currently needed; MPI, for inter-processor message passing, and the Parallel Extensible Toolkit for Scientific Computation (PETSc), which is leveraged to solve the global pressure matrix in parallel. Results presented include a set of testing and verification calculations and performance tests assessing parallel scaling characteristics up to a full core, sub-channel-resolved model of Watts Bar Unit 1 under hot full-power conditions (193 17x17 assemblies, ~56,000 pins, ~59,000 sub-channels, ~2.8 million thermal-hydraulic (TH) control volumes). Results demonstrate that CTF can now perform full core analysis (not previously possible due to excessively long runtimes and memory requirements) on the order of 20 minutes. This new capability is not only useful to standalone CTF users, but is also being leveraged in support of coupled code multi-physics calculations being done in the CASL program.