Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numerical simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Numerical simulation of a hovering rotor using embedded grids

The flow field for a rotor blade in hover was computed by numerically solving the compressible thin-layer Navier-Stokes equations on embedded grids. In this work, three embedded grids were used to discretize the flow field - one for the rotor blade and two to convect the rotor wake. The computations were performed at two hovering test conditions, for a two-bladed rectangular rotor of aspect ratio six. The results compare fairly with experiment and illustrates the use of embedded grids in solving helicopter type flow fields.

Duque, Earl-Peter N.↗

Aspects of Numerical Simulation of Circulation Control Airfoils

The mass-averaged compressible Navier-Stokes equations are solved for circulation control airfoils. Numerical solutions are computed with a multigrid method that uses an implicit approximate factorization smoother. The effects of flow conditions (e.g., free-stream Mach number, angle of attack, momentum coefficient) and mesh on the prediction of circulation control airfoil flows are considered. In addition, the impact of turbulence modeling, including curvature effects and modifications to reduce eddy viscosity levels in the wall jet (i.e., Coanda flow), is discussed. Computed pressure distributions are compared with available experimental data.

Swanson, R. C.↗

Numerical simulation of a 325 Mbit/s QPPM optical communication system

Optical digital receivers are being considered for intersatellite laser communication links. A demonstration system is being designed to operate at 325 MBit/s, using quaternary pulse position modulation (QPPM). Laboratory experiments have been conducted using a 50 MBit/s prototype system. A numerical model has been developed to simulate a QPPM optical receiver. The 50 MBit/s system was simulated to verify the validity of the model. The model was then used to simulate the projected behavior of the 325 MBit/s system. The model predicts a bit error rate of 10.6 at 38 incident photons per bit for 820 nm light.

Martino, Anthony J.↗

Numerical simulations of a transverse indirect circulation and low-level jet in the exit region of an upper-level jet

A numerical study was performed of a severe weather event (tornado) which occurred on May 10, 1973 in the Ohio region. The situation was modeled with a primitive equation mesoscale dynamic formulation. Account was taken of precipitation, the planetary boundary layer parameters as bulk quantities, the vertical pressure gradient, and lateral boundary conditions based on radiosonde data. Two 12-hr simulations, adiabatic and nondivergent, respectively, were analyzed for relationships between upper and lower level jets. In the adiabatic formulation, a transverse circulation with a low level jet formed at the exit region of the upper level jet. The nondivergent situation led to similar, but weaker, phenomena. Both forms suggest that indirect circulation in the exit zone of an upper level jet is strongly influenced by the initial structure of the jet.

Brill, K. F.↗

Numerical simulations of counterstreaming plasmas and their relevance to interhemispheric flows

The collisionless expansion of counterstreaming plasmas has been studied in order to elucidate the basic physical processes that may be operating during the initial refilling of depleted flux tubes after a magnetic storm. The numerical technique applied is briefly described, and simulation results are presented. The simulation geometry consisted of two high-density H(+)-O(+) electron plasmas separated by a low-density H(+)-electron plasma. The temporal evolution of the expanding plasmas and the electostatic potential in the region between the two sources is described. The main interacting streams are found to be stable with respect to both the ion acoustic and ion cyclotron modes and only the suprathermal forerunner ions are unstable with respect to the ion cyclotron mode. The results also suggest that a localized potential hill can form at the equator and that this potential hill can play an important role in the subsequent trapping and thermalization of the ion streams.

Singh, N.↗

Numerical simulation of the interaction of a vortex with stationary airfoil in transonic flow

A perturbation form of an implicit conservative, noniterative numerical algorithm for the two-dimensional thin layer Navier-Stokes and Euler equations is used to compute the interaction flow-field of a vortex with stationary airfoil. A Lamb-like analytical vortex having a finite core is chosen to interact with a thick (NACA 0012) and a thin (NACA 64A006) airfoil independently in transonic flow. Two different configurations of vortex interaction are studied, viz., (1) when the vortex is fixed at one location in the flowfield, and (2) when the vortex is convecting past the airfoil at freestream velocity. Parallel computations of this interacting flowfield are also done using a version of the Transonic Small Disturbance Code (ATRAN2). A special treatment of the leading edge region for thin airfoils is included in this code. With this, the three methods gave qualitatively similar results for the weaker interactions considered in this study. However, the strongest interactions considered proved to be beyond the capabilities of the small disturbance code. The results also show a far greater influence of the vortex on the airfoil flowfield when the vortex is stationary than when it is convecting with the flow.

Srinivasan, G. R.↗

Numerical simulation of mass injection for the formation of prominence magnetic field configurations. I - Asymmetric injection

A two-dimensional ideal MHD numerical model is used to investigate chromospheric mass injection into an overlying coronal dipole magnetic field. Such injection is shown to produce magnetic field deformations conducive to the formation of active region prominences. The results support a model in which an absorptive strand is formed by chromospheric asymmetric mass injection into the overlying coronal magnetic field. A necessary condition for the accumulation of the strands is that the mass injection forms a Kippenhahn-Schluter-type (1957) field configuration.

An, Chang-Hyuk↗

Numerical simulation of the flow about the F-18 HARV at high angle of attack

This research has been aimed at validating numerical methods for computing the flow about the complete F-18 HARV at alpha = 30 deg and alpha = 45 deg. At 30 deg angle of attack, the flow about the F-18 is dominated by the formation, and subsequent breakdown, of strong vortices over the wing leading-edge extensions (LEX). As the angle of attack is increased to alpha = 45 deg, the fuselage forebody of the F-18 contains significant laminar and transitional regions which are not present at alpha = 30 deg. Further, the flow over the LEX at alpha = 45 deg is dominated by an unsteady shedding in time, rather than strong coherent vortices. This complex physics, combined with the complex geometry of a full-aircraft configuration, provides a challenge for current computational fluid dynamics (CFD) techniques. The following sections present the numerical method and grid generation scheme that was used, a review of prior research done to numerically model the F-18 HARV, and a discussion of the current research. The current research is broken into three main topics; the effect of engine-inlet mass-flow rate on the F-18 vortex breakdown position, the results using a refined F-18 computational model to compute the flow at alpha = 30 deg and alpha = 45 deg, and research done using the simplified geometry of an ogive-cylinder configuration to investigate the physics of unsteady shear-layer shedding. The last section briefly summarizes the discussion.

Murman, Scott M.↗

Numerical Simulation of No-Vent Chill and Fill of a Large Liquid Hydrogen Tank

To enable the design of future in-space cryogenic propellant transfer vehicles, high accuracy models of the cryogenic propellant transfer process are desired. For in-space refueling applications, accurate simulations are desired of the propellant tank chilldown and no-vent fill (NVF) process in order to estimate the amount of propellant required, to determine the maximum sustainable flow rate to fill the tank, and to establish a timeline for the filling process. NVF is a complex process that involves numerous two-phase heat and mass transfer phenomena, such as boiling at the wall and evaporation and condensation at the liquid/vapor interface. In recent years, progress has been made in developing a numerical modeling technique using the Generalized Fluid System Simulation Program (GFSSP) that has been validated against several small-scale liquid nitrogen NVF tests. This paper presents GFSSP numerical model validation against three liquid hydrogen NVF tests on a large-scale propellant tank. Comparing the GFSSP model to the data for pressure, fill level, and wall temperature, the mean absolute percentage error is below 20% across the range of simulated conditions, indicating very good predictive agreement for this large-scale hydrogen NVF test series.

Alok Majumdar↗

Numerical Simulation of No-Vent Chill and Fill of a Large Liquid Hydrogen Tank

To enable the design of future in-space cryogenic propellant transfer vehicles, high accuracy models of the cryogenic propellant transfer process are desired. For in-space refueling applications, accurate simulations are desired of the propellant tank chilldown and no-vent fill (NVF) process in order to estimate the amount of propellant required, to determine the maximum sustainable flow rate to fill the tank, and to establish a timeline for the filling process. NVF is a complex process that involves numerous two-phase heat and mass transfer phenomena, such as boiling at the wall and evaporation and condensation at the liquid/vapor interface. In recent years, progress has been made in developing a numerical modeling technique using the Generalized Fluid System Simulation Program (GFSSP) that has been validated against several small-scale liquid nitrogen NVF tests. This paper presents GFSSP numerical model validation against three liquid hydrogen NVF tests on a large-scale propellant tank. Comparing the GFSSP model to the data for pressure, fill level, and wall temperature, the mean absolute percentage error is below 20% across the range of simulated conditions, indicating very good predictive agreement for this large-scale hydrogen NVF test series.

Alok Majumdar↗

Direct numerical simulation of a combusting droplet with convection

The evaporation and combustion of a single droplet under forced and natural convection was studied numerically from first principles using a numerical scheme that solves the time-dependent multiphase and multispecies Navier-Stokes equations and tracks the sharp gas-liquid interface cutting across an arbitrary Eulerian grid. The flow fields both inside and outside of the droplet are resolved in a unified fashion. Additional governing equations model the interphase mass, energy, and momentum exchange. Test cases involving iso-octane, n-hexane, and n-propanol droplets show reasonable comparison rate, and flame stand-off distance. The partially validated code is, thus, readied to be applied to more demanding droplet combustion situations where substantial drop deformation render classical models inadequate.

Liang, Pak-Yan↗

Numerical simulation of reentry flow around the Shuttle Orbiter including real gas effects

The flight environment of a reentry vehicle is predicted from the numerical solution of fluid dynamics equations for the region between the blunt nose and the swept wings. The inviscid portion of the shock layer is modeled by the Euler equations, but the laminar viscous flow adjacent to the wall is modeled by the approximate parabolic Navier-Stokes equations. The approximations made to the axial gradients of pressure and diffusive fluxes enable the coupled inviscid and viscous equations to be solved efficiently along the body axis. The equilibrium air aftbody code contains significant improvements over its predecessor which only considers a perfect gas model and noncircular configurations. The inclusion of numerical damping either explicitly or implicitly has extended its capabilities for predicting flow field around a winged configuration at higher Machs and greater angles of attack. The results are obtained on the cylindrical coordinates and satisfactory for the Shuttle Orbiter at a free-stream Mach number of 22 and an angle of attack of 40 deg. Also discussed are the inviscid formulation and its application for wind-tunnel conditions.

Li, C. P.↗

Numerical simulation of crystal fractionation in shergottite meteorites

Cumulus clinopyroxenes in the Shergotty and Zagami meteorites suggest crystal fractionation occurred, possibly by gravitative settling. Numerical models of this process in a nonconvecting environment argue that the small phenocrysts can segregate only under extreme conditions of cooling time or gravitational field strength. Since textures indicate that cooling time was not excessive, a large (planetary) g is required by these models, in agreement with other suggestions that the shergottite parent body may be Mars. Other calculations indicate that it is extremely difficult to produce the observed textures in a convecting environment, unless crystal setting occurred in a quiescent zone at the bottom of the magma chamber.

Grimm, R. E.↗

Numerical simulation of the hypersonic flow around lifting vehicles

A method for solving the viscous hypersonic flow field around realistic configurations is presented. The numerical procedure for generating the required finite difference grid and the two-factored implicit flow solver are described. Results are presented for the shuttle orbiter and a generic wing-body configuration at hypersonic Mach numbers.

Rizk, Yehia↗

Numerical simulation of the hypersonic flow around lifting vehicles

A method of solving the viscous hypersonic flow field around realistic configurations is presented. The numerical procedure for generating the required finite difference grid and the two-factored implicit flow solver are described. Results are presented for the shuttle orbiter and a generic wing-body configuration at hypersonic Mach numbers.

Rizk, Yehia↗

Numerical simulation of forced convection in a two fluid layered system in a floating zone configuration

Forced convection due to rotational effects has been numerically studied in a stable two-fluid layered system in which the lighter fluid occupies the upper portion of the computational and physical domain. Results are presented for three different fluid height combinations for conditions prevailing in a microgravity environment. It is found that the heavier fluid tends to dominate the flow field, and that equal corotation and counterrotation cases produce nearly identical behavior in the flow and thermal fields.

Ramachandran, N.↗

Nonlinear behavior of solar gravity modes driven by He-3 in the core. II - Numerical simulations

The nonlinear behavior of gravity-mode oscillations driven by He-3-destroying reactions in the solar core has been examined by numerically integrating equations describing a very simplified model. The results of a previous bifurcation analysis, which suggest that such oscillations are unlikely to attain amplitudes sufficient to trigger core convection, are verified. These results are extended to models whose nuclear reaction rates and thermal stratification represent the core somewhat more accurately. Nonlinear processes give rise to a preference for the oscillations to develop as standing waves rather than traveling waves, thus breaking the degeneracy between these two types of motion which exists in linearized theory. Study of the large-amplitude behavior of the oscillations is hindered by a tendency for the model to become thermally unstable.

Merryfield, William J.↗

Numerical simulation of frontogenesis in a moist atmosphere

This paper describes the effects of condensation and evaporation on mesoscale frontal circulations in a two-dimensional numerical model. Utilizing an explicit scheme for the prediction of water vapor, cloud water and rainwater, the model is used to investigate the interactions between convection and the larger-scale environment. The model results are qualitatively compared with results of theoretical and observational studies, including those from the recent Severe Environmental Storms and Mesoscale Experiment-Atmospheric Variability Experiment (SESAME-AVE). Three major differences are observed in a comparison of the moist and dry simulations: (1) The speed of the upper- and lower-level jets was significantly higher in the moist case, (2) The intensity of the ageostrophic circulations in the moist simulation was much stronger, (3) The vertical velocity field in the moist case was characterized by a banded structure not present in the dry case.

Hsie, E.-Y.↗