Search NASA⌕ Search

SEARCH · Search NASA

Results for “Oscillating”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

A Distant Mirror: Solar Oscillations Observed on Neptune by the Kepler K2 Mission

Starting in 2014 December, Kepler (K2) observed Neptune continuously for 49 days at a 1-minute cadence. The goals consisted of studying its atmospheric dynamics, detecting its global acoustic oscillations, and those of the Sun, which we report on here. We present the first indirect detection of solar oscillations in intensity measurements. Beyond the remarkable technical performance, it indicates how Kepler would see a star like the Sun. The result from the global asteroseismic approach, which consists of measuring the oscillation frequency at maximum amplitude max velocity and the mean frequency separation between mode overtones delta velocity, is surprising as the max velocity measured from Neptune photometry is larger than the accepted value. Compared to the usual reference max velocity of the sun equal to 3100 microhertz, the asteroseismic scaling relations therefore make the solar mass and radius appear larger by 13.8 plus or minus 5.8 percent and 4.3 plus or minus 1.9 percent, respectively. The higher max velocity is caused by a combination of the value of max velocity of the sun, being larger at the time of observations than the usual reference from SOHO/VIRGO/SPM (Variability of solar IRradiance and Gravity Oscillations / on board SOHO (Solar and Heliospheric Observatory) / Sun PhotoMeters) data (3160 plus or minus 10 microhertz), and the noise level of the K2 time series, being 10 times larger than VIRGO's. The peak-bagging method provides more consistent results: despite a low signal-to-noise ratio (S/N), we model 10 overtones for degrees iota equal 0, 1, 2. We compare the K2 data with simultaneous SOHO/VIRGO/SPM photometry and Bison (Birmingham Solar-Oscillations Network) velocity measurements. The individual frequencies, widths, and amplitudes mostly match those from VIRGO and BiSON within 1 sigma, except for the few peaks with the lowest S/N.

planets and satellites: individual (Neptune) – s↗

Novel High Temperature Capacitive Pressure Sensor Utilizing SiC Integrated Circuit Twin Ring Oscillators

This paper describes initial development and testing of a novel high temperature capacitive pressure sensor system. The pressure sensor system consists of two 4H-SiC 11-stage ring oscillators and a SiCN capacitive pressure sensor. One oscillator has the capacitive pressure sensor fixed at one node in its feedback loop and varies as a function of pressure and temperature while the other provides a pressure-independent reference frequency which can be used to temperature compensate the output of the first oscillator. A two-day repeatability test was performed up to 500C on the oscillators and the oscillator fundamental frequency changed by only 1. The SiCN capacitive pressure sensor was characterized at room temperature from 0 to 300 psi. The sensor had an initial capacitance of 3.76 pF at 0 psi and 1.75 pF at 300 psi corresponding to a 54 change in capacitance. The integrated pressure sensor system was characterized from 0 to 300 psi in steps of 50 psi over a temperature range of 25 to 500C. The pressure sensor system sensitivity was 0.113 kHzpsi at 25C and 0.026 kHzpsi at 500C.

high temperature↗

Helioseismic Observations of Torsional Oscillations Inside the Sun and Their Potential for Predicting Solar Cycles

The helioseismic analysis of torsional oscillations of the Sun, obtained in 1996-2018 from SOHO (Solar and Heliospheric Observatory) and SDO (Solar Dynamics Observatory), reveals the spatio-temporal dynamics associated with the dynamo process. The data reveal new relationships between the migrating magnetic field patterns observed in synoptic magnetograms and the dynamics of torsional oscillations near the surface and in the interior. In particular, it is found that the evolution of torsional oscillations in the deep convection zone is ahead of the surface magnetic evolution by several years, and that it is related to the extended solar cycle phenomenon previously observed in the solar corona. The data show substantial differences in the torsional oscillation properties between Cycles 23 and 24 indicating fundamental changes in the dynamo regime, and also reveal initiation of Cycle 25. The helioseismology observations of the torsional oscillations open new perspectives for understanding the global dynamo processes inside the Sun, and for predicting the next solar cycle.

Oscillations↗

Extension and Validation of the Pendulum Model for Longitudinal Solar Prominence Oscillations

Context. Longitudinal oscillations in prominences are common phenomena on the Sun. These oscillations can be used to infer the geometry and intensity of the filament magnetic field. Previous theoretical studies of longitudinal oscillations made two simplifying assumptions: uniform gravity and semicircular dips on the supporting flux tubes. However, the gravity is not uniform and realistic dips are not semicircular. Aims. Our aim is to understand the effects of including the nonuniform solar gravity on longitudinal oscillations and explore the validity of the pendulum model with different flux-tube geometries. Methods. We first derived the equation describing the motion of the plasma along the flux tube including the effects of nonuniform gravity, yielding corrections to the original pendulum model. We also computed the full numerical solutions for the normal modes and compared them with the new pendulum approximation. Results. We find that the nonuniform gravity introduces a significant modification in the pendulum model. We also found a cut-off period; i.e., the longitudinal oscillations cannot have a period longer than 167 min. In addition, considering different tube geometries, the period depends almost exclusively on the radius of curvature at the bottom of the dip. Conclusions. We conclude that nonuniform gravity significantly modifies the pendulum model. These corrections are important for prominence seismology, because the inferred values of the radius of curvature and minimum magnetic-field strength differ substantially from those of the old model. However, we find that the corrected pendulum model is quite robust and is still valid for noncircular dips.

Sun: corona↗

Oscillator Seeding of a High Gain Harmonic Generation FEL in a Radiator-First Configuration

A longitudinally coherent X-ray pulse from a high repetition rate free electron laser (FEL) is desired for a wide variety of experimental applications. However, generating such a pulse with a repetition rate greater than 1 MHz is a significant challenge. The desired high repetition rate sources, primarily high harmonic generation with intense lasers in gases or plasmas, do not exist now, and, for the multi-MHz bunch trains that superconducting accelerators can potentially produce, are likely not feasible with current technology. In this paper, we propose to place an oscillator downstream of a radiator. The oscillator generates radiation that is used as a seed for a high gain harmonic generation (HGHG) FEL which is upstream of the oscillator. For the first few pulses the oscillator builds up power and, until power is built up, the radiator has no HGHG seed. As power in the oscillator saturates, the HGHG is seeded and power is produced. The dynamics and stability of this radiator-first scheme is explored analytically and numerically. A single-pass map is derived using a semi-analytic model for FEL gain and saturation. Iteration of the map is shown to be in good agreement with simulations. A numerical example is presented for a soft X-ray FEL.

43 PARTICLE ACCELERATORS↗

On BWR regional oscillations with rotational symmetry line using SIMULATE-3K

A new stability analysis methodology is being developed at the Paul Scherrer Institute (PSI) using the best-estimate coupled neutronic/thermal- hydraulics code, SIMULATE-3K (S3K). This methodology has so far been validated against Leibstadt NPP (KKL) stability tests of C10, C13 and C19, which all show global (in-phase) oscillations. However, the methodology has not yet been validated for regional instabilities and to that aim, a special KKL cycle 07 stability test was selected. Indeed, during this test, the core not only showed growing power oscillation amplitudes in an out-of-phase regime but also an oscillating and rotating symmetry line. Thereby, it was selected in order to verify the S3K capability to predict regional instabilities and on that basis, obtain more insights towards understanding the causes for the oscillatory and rotational behaviour of symmetry lines. The results obtained so far are presented in this paper. First, it is found that the S3K results are in good agreement with measurements both qualitatively and quantitatively, although the resonance frequency is slightly over-predicted. Secondly, the excitation of the out-of-phase mode with oscillations as well as rotation of the symmetry line is also well captured i.e. in accordance to the experimental observations. Related to this, an in-depth analysis of LPRM signals indicates that two out-of-phase oscillation modes associated to two azimuthal neutronic modes are simultaneously excited. Furthermore, it is found that a superposition of these two modes will trigger the symmetry line dynamics and that the behaviour will be guided by the dominance ratio between these two modes. More precisely, the oscillatory behaviour is due to the superposition of the two azimuthal modes but with one dominant mode. The rotational behaviour is however due to the superposition of the two modes with comparable strengths. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Chemical sensor with oscillating cantilevered probe and mechanical stop

The invention provides a method of detecting a chemical species with an oscillating cantilevered probe. A cantilevered beam is driven into oscillation with a drive mechanism coupled to the cantilevered beam. A free end of the oscillating cantilevered beam is tapped against a mechanical stop coupled to a base end of the cantilevered beam. An amplitude of the oscillating cantilevered beam is measured with a sense mechanism coupled to the cantilevered beam. A treated portion of the cantilevered beam is exposed to the chemical species, wherein the cantilevered beam bends when exposed to the chemical species. A second amplitude of the oscillating cantilevered beam is measured, and the chemical species is determined based on the measured amplitudes.

47 OTHER INSTRUMENTATION↗

Modified semi-classical methods for nonlinear quantum oscillations problems

We develop a modified semi-classical approach to the approximate solution of Schroedinger's equation for certain nonlinear quantum oscillations problems. In our approach, at lowest order, the Hamilton-Jacobi equation of the conventional semi-classical formalism is replaced by an inverted-potential-vanishing-energy variant thereof. With suitable smoothness, convexity and coercivity properties imposed on its potential energy function, we prove, using methods drawn from the calculus of variations together with the (Banach space) implicit function theorem, the existence of a global, smooth 'fundamental solution' to this equation. Higher order quantum corrections thereto, for both ground and excited states, can then be computed through the integration of associated systems of linear transport equations, derived from Schroedinger's equation, and formal expansions for the corresponding energy eigenvalues obtained therefrom by imposing the natural demand for smoothness on the (successively computed) quantum corrections to the eigenfunctions. For the special case of linear oscillators our expansions naturally truncate, reproducing the well-known exact solutions for the energy eigenfunctions and eigenvalues. As an explicit application of our methods to computable nonlinear problems, we calculate a number of terms in the corresponding expansions for the one-dimensional anharmonic oscillators of quartic, sectic, octic, and dectic types and compare the results obtained with those of conventional Rayleigh/Schroedinger perturbation theory. To the orders considered (and, conjecturally, to all orders) our eigenvalue expansions agree with those of Rayleigh/Schroedinger theory whereas our wave functions more accurately capture the more-rapid-than-gaussian decay known to hold for the exact solutions to these problems. For the quartic oscillator in particular our results strongly suggest that both the ground state energy eigenvalue expansion and its associated wave function expansion are Borel summable to yield natural candidates for the actual exact ground state solution and its energy. Our techniques for proving the existence of the crucial 'fundamental solution' to the relevant (inverted-potential-vanishing-energy) Hamilton-Jacobi equation have the important property of admitting interesting infinite dimensional generalizations. In a project paralleling the present one we shall show how this basic construction can be carried out for the Yang-Mills equations in Minkowski spacetime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A fully integrated oven controlled microelectromechanical oscillator – Part II. Characterization and measurement

Our paper reports the measurement and characterization of a fully integrated oven controlled microelectromechanical oscillator (OCMO). The OCMO takes advantage of high thermal isolation and monolithic integration of both aluminum nitride (AlN) micromechanical resonators and electronic circuitry to thermally stabilize or ovenize all the components that comprise an oscillator. Operation at microscale sizes allows implementation of high thermal resistance platform supports that enable thermal stabilization at very low-power levels when compared with the state-of-the-art oven controlled crystal oscillators. A prototype OCMO has been demonstrated with a measured temperature stability of -1.2 ppb/°C, over the commercial temperature range while using tens of milliwatts of supply power and with a volume of 2.3 mm 3 (not including the printed circuit board-based thermal control loop). Additionally, due to its small thermal time constant, the thermal compensation loop can maintain stability during fast thermal transients (>10 °C/min). This new technology has resulted in a new paradigm in terms of power, size, and warm up time for high thermal stability oscillators.

42 ENGINEERING↗

New avenues for |∆ B | = 2 processes beyond neutron-antineutron oscillations

We explore baryon-number-violating (|∆ B | = 2) processes beyond the well-known neutron-antineutron ($n - \bar{n}$) oscillations, focusing on the $Λ - \bar{Λ}$ system. The presence of a strange quark in the Λ baryon introduces a new set of six-quark operators roughly of the form (uds) 2 , which are different from the (udd) 2 operators responsible for oscillations. Using the Standard Model Effective Field Theory (SMEFT), we classify all dimension-9 operators that cause |∆ B | = 2 transitions and study their UV completions mediated by exotic scalar fields with trilinear interactions. We demonstrate that in these models, oscillations can occur at tree level, with $n - \bar{n}$ mixing potentially appearing at higher loop levels. We employ a chiral effective theory to constrain the effective mass mixing δm Λ , deriving bounds from current experimental limits on $n - \bar{n}$ oscillations and dinucleon decays such as pp → K + K + . These bounds indicate that $Λ - \bar{Λ}$ oscillations probe a complementary parameter space, sensitive to baryon-number violation at scales up to 10 2 − 10 3 TeV. We show that the existing indirect bounds make it challenging to provide a competitive bound on δm Λ at BESIII.

Baryon/Lepton Number Violation↗

Compact perturbative expressions for neutrino oscillations in matter

We further develop and extend a recent perturbative framework for neutrino oscillations in uniform matter density so that the resulting oscillation probabilities are accurate for the complete matter potential versus baseline divided by neutrino energy plane. This extension also gives the exact oscillation probabilities in vacuum for all values of baseline divided by neutrino energy. The expansion parameter used is related to the ratio of the solar to the atmospheric $\Delta m^2$ scales but with a unique choice of the atmospheric $\Delta m^2$ such that certain first-order effects are taken into account in the zeroth-order Hamiltonian. Using a mixing matrix formulation, this framework has the exceptional feature that the neutrino oscillation probability in matter has the same structure as in vacuum, to all orders in the expansion parameter. It also contains all orders in the matter potential and $\sin\theta_{13}$. It facilitates immediate physical interpretation of the analytic results, and makes the expressions for the neutrino oscillation probabilities extremely compact and very accurate even at zeroth order in our perturbative expansion. Furthermore, the first and second order results are also given which improve the precision by approximately two or more orders of magnitude per perturbative order.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

pH-dependent Ca+2 oscillations prevent untimely acrosome reaction in human sperm

Highlights: • The external pH maintained during capacitation influences Acrosome Reaction. • Ca{sup 2+} oscillations prevent AR and are more frequent at external pH 6.5. • Pharmacological inhibition of Ca{sup 2+} oscillations restored Acrosome Reaction. During transit through the female reproductive tract, sperm encounter metabolites and environmental conditions that modulate various processes leading to fertilization. Intracellular Ca{sup 2+} dynamics regulate the acrosome reaction (AR), which involves exocytosis of the acrosomal granule, a prerequisite for successful fertilization. We explored the ability of progesterone, prostanglandin-E1, and GABA to induce Ca{sup 2+} mobilization and AR in single human spermatozoa capacitated under external pH (pH{sub e}) conditions found in different regions of the female reproductive tract (pH{sub e} 6.5, 7.4 and 8.0). The highest percentage of AR induction, regardless of the inducer, occurred when sperm were capacitated at pH{sub e} 7.4. Interestingly, at pH{sub e} 6.5 a high percentage of cells exhibit Ca{sup 2+} oscillations, which prevent AR. These oscillations involve extracellular and intracellular Ca{sup 2+} channels. Pharmacological inhibition of Ca{sup 2+} oscillations restores the ability of spermatozoa to undergo the AR when exposed to progesterone, even if capacitated at pH{sub e} 6.5.

60 APPLIED LIFE SCIENCES↗

Light exposure influences the diurnal oscillation of gut microbiota in mice

Highlights: • Gut microbiota displayed robust rhythmic fluctuation in both compositional and functional level in mice. • The fluctuation of gut microbiota was modulated by enviromental light exposure. • The abundance of Clostridiawas dramatically enhanced in the small intestine when mice were underwent constant darkness. The gut microbiota exhibit diurnal compositional and functional oscillations that influence the host homeostasis. However, the upstream factors that affect the microbial oscillations remain elusive. Here, we focused on the potential impact of light exposure, the main factor that affects the host circadian oscillation, on the diurnal oscillations of intestinal microflora to explore the upstream factor that governs the fluctuations of the gut microbes. The gut microbiota of the mice that were underwent regular light/dark (LD) cycles exhibited a robust rhythm at both compositional and functional level, in all parts of the intestine. Comparably, constant darkness (Dark-Dark, DD) led to the loss of the rhythmic oscillations in almost all parts of the intestine. Additionally, the abundance of Clostridia in DD conditions was dramatically enhanced in the small intestine. Our data indicated light exposure is the upstream factor that governs the regular diurnal fluctuations of gut microbiota in vivo.

60 APPLIED LIFE SCIENCES↗

Pattern formation in a coupled membrane-bulk reaction-diffusion model for intracellular polarization and oscillations

Reaction-diffusion systems have been widely used to study spatio-temporal phenomena in cell biology, such as cell polarization. Coupled bulk-surface models naturally include compartmentalization of cytosolic and membrane-bound polarity molecules. Here we study the distribution of the polarity protein Cdc42 in a mass-conserved membrane-bulk model, and explore the effects of diffusion and spatial dimensionality on spatio-temporal pattern formation. We first analyze a one-dimensional (1-D) model for Cdc42 oscillations in fission yeast, consisting of two diffusion equations in the bulk domain coupled to nonlinear ODEs for binding kinetics at each end of the cell. In 1-D, our analysis reveals the existence of symmetric and asymmetric steady states, as well as anti-phase relaxation oscillations typical of slow-fast systems. We then extend our analysis to a two-dimensional (2-D) model with circular bulk geometry, for which species can either diffuse inside the cell or become bound to the membrane and undergo a nonlinear reaction-diffusion process. We also consider a nonlocal system of PDEs approximating the dynamics of the 2-D membrane-bulk model in the limit of fast bulk diffusion. In all three model variants we find that mass conservation selects perturbations of spatial modes that simply redistribute mass. In 1-D, only anti-phase oscillations between the two ends of the cell can occur, and in-phase oscillations are excluded. In higher dimensions, no radially symmetric oscillations are observed. Instead, the only instabilities are symmetry-breaking, either corresponding to stationary Turing instabilities, leading to the formation of stationary patterns, or to oscillatory Turing instabilities, leading to traveling and standing waves. Codimension-two Bogdanov—Takens bifurcations occur when the two distinct instabilities coincide, causing traveling waves to slow down and to eventually become stationary patterns. Our work clarifies the effect of geometry and dimensionality on behaviors observed in ma.ss-conserved cell polarity models.

97 MATHEMATICS AND COMPUTING↗

Direct observation of coherent energy transfer in nonlinear micromechanical oscillators

Energy dissipation is an unavoidable phenomenon of physical systems that are directly coupled to an external environmental bath. In an oscillatory system, it leads to the decay of the oscillation amplitude. In situations where stable oscillations are required, the energy dissipated by the vibrations is usually compensated by replenishment from external energy sources. Consequently, if the external energy supply is removed, the amplitude of oscillations start to decay immediately, since there is no means to restitute the energy dissipated. Here, we demonstrate a novel dissipation engineering strategy that can support stable oscillations without supplying external energy to compensate losses. The fundamental intrinsic mechanism of resonant mode coupling is used to redistribute and store mechanical energy among vibrational modes and coherently transfer it back to the principal mode when the external excitation is off. To experimentally demonstrate this phenomenon, we exploit the nonlinear dynamic response of microelectromechanical oscillators to couple two different vibrational modes through an internal resonance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Little-Parks like oscillations in lightly doped cuprate superconductors

Understanding the rich and competing electronic orders in cuprate superconductors may provide important insight into the mechanism of high-temperature superconductivity. Here, by measuring Bi 2 Sr 2 CaCu 2 O 8+x in the extremely underdoped regime, we obtain evidence for a distinct type of ordering, which manifests itself as resistance oscillations at low magnetic fields (≤10 T) and at temperatures around the superconducting transition. By tuning the doping level p continuously, we reveal that these low-field oscillations occur only when p < 0.1. The oscillation amplitude increases with decreasing >p but the oscillation period stays almost constant. We show that these low-field oscillations can be well described by assuming a periodic superconducting structure with a mesh size of about 50 nm. Such a charge order, which is distinctly different from the well-established charge density wave and pair density wave, seems to be an unexpected piece of the puzzle on the correlated physics in cuprates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

B-periodic oscillations in the Hall-resistance induced by a dc-current-bias under combined microwave-excitation and dc-current bias in the GaAs/AlGaAs 2D system

We report the observation of dc-current-bias-induced B-periodic Hall resistance oscillations and Hall plateaus in the GaAs/AlGaAs 2D system under combined microwave radiation- and dc bias excitation at liquid helium temperatures. The Hall resistance oscillations and plateaus appear together with concomitant oscillations also in the diagonal magnetoresistance. The periods of Hall and diagonal resistance oscillations are nearly identical, and source power (P) dependent measurements demonstrate sub-linear relationship of the oscillation amplitude with P over the span 0 < P ≤ 20 mW.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Transverse oscillating bubble enhanced laser-driven betatron X-ray radiation generation

Abstract Ultrafast high-brightness X-ray pulses have proven invaluable for a broad range of research. Such pulses are typically generated via synchrotron emission from relativistic electron bunches using large-scale facilities. Recently, significantly more compact X-ray sources based on laser-wakefield accelerated (LWFA) electron beams have been demonstrated. In particular, laser-driven sources, where the radiation is generated by transverse oscillations of electrons within the plasma accelerator structure (so-called betatron oscillations) can generate highly-brilliant ultrashort X-ray pulses using a comparably simple setup. Here, we experimentally demonstrate a method to markedly enhance the parameters of LWFA-driven betatron X-ray emission in a proof-of-principle experiment. We show a significant increase in the number of generated photons by specifically manipulating the amplitude of the betatron oscillations by using our novel Transverse Oscillating Bubble Enhanced Betatron Radiation scheme. We realize this through an orchestrated evolution of the temporal laser pulse shape and the accelerating plasma structure. This leads to controlled off-axis injection of electrons that perform large-amplitude collective transverse betatron oscillations, resulting in increased radiation emission. Our concept holds the promise for a method to optimize the X-ray parameters for specific applications, such as time-resolved investigations with spatial and temporal atomic resolution or advanced high-resolution imaging modalities, and the generation of X-ray beams with even higher peak and average brightness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗