SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The economics and techniques for eliminating wafering as a part of ingot technology in the production of silicon sheets for photovoltaic applications are considered. Technical progress in both ingot and non-ingot technologies for the low cost solar array project is described in the context of process economics. The critical areas of research in wafering are delineated and their payoff potential discussed.
Research on large-bore ball and roller bearings for aircraft engines is described. Tapered roller bearings and small-bore bearings are discussed. Temperature capabilities of rolling element bearings for aircraft engines have moved from 450 to 589 K (350 to 600 F) with increased reliability. High bearing speeds to 3 million DN can be achieved with a reliability exceeding that which was common in commercial aircraft. Capabilities of available bearing steels and lubricants were defined and established. Computer programs for the analysis and design of rolling element bearings were developed and experimentally verified. The reported work is a summary of NASA contributions to high performance engine and transmission bearing capabilities.
The design and performance characteristics of deep space missions to study comets are discussed. Following a brief review of the scientific objectives of cometary missions and the problems posed by cometary orbits and the cometary environment to designers of space missions, consideration is given to the spacecraft and planned trajectories of cometary missions either planned or under consideration at one time. The missions include the Gioto mission, a Halley fly-through to be launched by ESA which developed out of the defunct NASA/ESA Halley/Tempel 2 rendezvous mission; the Japanese Planet A and Soviet/French flyby missions to Halley; and the Halley Intercept Mission, studied by NASA but not approved. It is pointed out that although much new information will be obtained from the Halley flyby missions, the second generation of cometary missions will undoubtedly require a rendezvous mission such as the one NASA is still studying.
It is established that geographic coincidences exist between high-altitude Magsat scalar anomalies and major geologic and tectonic structures, with oceanic abyssal plains overlain by negative anomalies agreeing well in spatial extent and position and submarine platforms lying beneath positive scalar anomalies. In addition, geographic coincidence is found in the continents between many high-latitude positive anomalies and shields and cratons in North America, Eurasia and Australia. While these correlations are qualitative, they serve to identify regions for detailed study. The global distribution of anomalies provides a basis for comparative study which will be enhanced when reduced-to-pole versions of the Magsat data become available.
Buoyancy alters the flow in continuous flow electrophoresis chambers through the mechanism of hydrodynamic instability and, when the instability is supressed by careful cooling of the chamber boundaries, by restructuring the axial flow. The expanded roles of buoyancy follow upon adapting the size of the chamber and the electric field so as to fractionate certain sorts of cell populations. Scale-up problems, hydrodynamic stability and the altered flow fields are discussed to show how phenomena overlooked in the design and operations of narrow-gap devices take on an overwhelming importance in wide-gap chambers
After an historical account of the development of transonic aerodynamics before 1940 and in the period 1945-1975, attention is given to the design for cruise performance efficiency of commercial transport aircraft, with emphasis on transonic wing design, the practical aerodynamic problems of military aircraft, with emphasis on store carriage and separation, experimental testing in transonic wind tunnels capable of Reynolds number simulation and aerodynamic flow visualization, and such mathematical techniques as potential equation methods for flow prediction and Reynolds-averaged Navier-Stokes computations of transonic flows. Also considered are transonic design using computational aerodynamics, the application of computation methods to transonic wing design, computational experience with advanced tactical aircraft, the evaluation of full potential flow methods, and the application of a shock-turbulent boundary layer interaction theory to transonic flowfield analysis.
The requirements generated by the loss-of-control problems of contemporary and future aircraft are discussed in connection with the development of rocket and parachute technology for spin-recovery systems used in current aircraft. Recovery rockets must be designed to provide the thrust (not impulse) levels required by the specific application, because insufficient thrust will not effect a recovery regardless of its duration. The need for long firing times and a restart capability make liquid rocket systems preferable. Alternatives to the current tail-mounted method of implementing parachute systems include: nose chutes, wing-tip parachutes, dual-bridle and rigid towline systems. Comparative test results for these and the conventional system are given along with the latest dynamic model test technique for spin-recovery rockets.
Explore the source record for details and available documents.
Images characteristics of geographic regions other than the northeastern part of the United States are presented for interpretation. Pre- and post-eruption imagery of Mt. St. Helens volcano serves to demonstrate the advantages of thermal infrared sensing, and the potential for developing a timely, decision oriented thematic map to be used in solving drought-related problems in Upper Volta is examined to show the applicability of satellite remote sensing in all geographic areas.
Mount St. Helens erupted somewhat less than 0.5 cu km of magma (dense rock equivalent) on May 18, 1980. The May 18 event was usually violent. As much 35% of the volume of the airfall material fell outside of the 2.5 mm isopach, which encloses about 88,000 sq km. This extraordinary dispersive power was transmitted by an eruption column which reached heights of more than 20 km. There was a lateral blast (or surge) of unusually large dimensions associated with the onset of the eruption. The magma is dacitic in composition and had a low ( 500 ppm) sulfur content. Distal ashes contain much nonmagmatic (lithic) material, but smaller ( 50 microns m) particles are mostly finely divided magmatic dacite. The grain size distributions of the ash are multimodal, frequently with peaks at 90, 25, and 10 microns. The finer populations fell out faster than their terminal velocities as simple particles would suggest. It is inferred that large proportions of the fine ash fell out as composite particles. This condition greatly reduces the atmospheric burden of silicate particles. Some of the unusual aspects (violence, intense surges, multimodal grain size distributions, lithic content of the ashes) of the eruption may be due to its phreatomagmatic character. The hydrothermal system above the magma may have infiltrated the magma body at the onset of the eruption. An "overprint" of the geochemistry of this hydrothermal system on the geochemistry of the magmatic gas system is likely. One important feature is that reduced gas species may be much more abundant than in many eruptions. Another is that fine ash may form aggregates more readily.
The current IPAD technology and the state-of-the-art in computer technology are compared from the point of view of a computer vendor. Issues of engineering data management, distributed architectures, and user interfaces are covered.
The uses, benefits, and technology needs of the U.S. general aviation industry were studied in light of growing competition from foreign general aviation manufacturers, especially in the commuter and business jet aircraft markets.
Strategies for teaching the fundamentals of quantitative remote sensing to students from diverse disciplines and with a broad range of mathematical backgrounds are described. Because the concepts are fairly abstract and complex, the successful educator must take care to motivate and assist the students in mastering the concepts. He/she should strive to communicate intuitive notions of the concepts couched in settings as familiar as possible and use these settings to illustrate each mathematical or statistical formulation which is introduced. The utilization of laboratory-type experiences and lectures from experts is also suggested.
The growth of remote sensing course offerings within geography is reviewed and the impact of remote sensing on the discipline is discussed.
The Kansas applied remote sensing (KARS) program conducts demonstration projects and applied research on remote sensing techniques which enable local, regional, state and federal agency personnel to better utilize available satellite and airborne remote sensing systems. As liason with Kansas agencies for the Earth Resources Laboratory (ERL), Kansas demonstration project, KARS coordinated interagency communication, field data collection, hands-on training, and follow-on technical assistance and worked with Kansas agency personnel in evaluating land cover maps provided by ERL. Short courses are being conducted to provide training in state-of-the-art remote sensing technology for university faculty, state personnel, and persons from private industry and federal government. Topics are listed which were considered in intensive five-day courses covering the acquisition, interpretation, and application of information derived through remote sensing with specific training and hands-on experience in image interpretation and the analysis of LANDSAT data are listed.
The problems involved in satellite remote sensing of coastal zones are examined. The differences between remote sensing of terrestrial regions and remote sensing of open ocean areas are reviewed. The associate ranges of time and spatial scales and spectral and radiometric resolution are considered. It is concluded that, in general remote sensing of the coastal region is more appropriately performed with aircraft.
The evolution of traction-drive technology, in a limited sense, is traced from its early development to the efforts underway today.
Since the systematic use of earth surface data collection by orbital sensor systems started in 1972 with the launching of the North American LANDSAT satellite, a great effort has been made to assimilate, develop and transfer remote sensing technology (data acquisition and analysis) in its many applications in Brazil. The availability of sensor systems and existing data is considered approached, as well as those which will soon be available to the Brazilian researchers. The new systems of the LANDSAT-4, of the Columbia space shuttle and of the French satellites of the SPOT series are discussed. Some characteristics of the sensor system for the first Brazilian remote sensing satellite, to be launched by the end of the decade, are presented. Some LANDSAT-4 and SPOT simulation products are shown, emphasizing how the data obtained by these new satellites can be applied.