SEARCH · Search NASA

Results for “PHASE STABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

DOE OSTI2018

Suppressing η-phase development in steel-cemented tungsten carbide: A spark plasma sintering study

We describe the phase stability of a cemented tungsten carbide prepared using a high-vanadium tool steel as the cementing/binder phase and confirm suppression of (Fe, W) 6 C η-phase formation, attributed to the preferential formation of a V 0.78 W 0.22 C 1-x phase that exists as islands within the Fe-rich binder matrix. The samples were prepared using spark plasma sintering (SPS), starting from commercially available WC and A11-LVC tool steel powders. The starting powders were ball milled adding 10, 15, and 20 vol.% steel. An A11-LVC tool steel was chosen as a low-cost hard steel (49 HRC) that does not contain Ni or Co but has a high vanadium (~9 wt.%) and carbon (~1.75 wt.%) content. Our results show that sintering by SPS can produce high-density (>98%) WC-steel specimens in which the matrix wets the WC grain surfaces and formation of the brittle η-phase is avoided. The η phase is often regarded as embrittling and undesirable, and its presence can result in degradation of mechanical properties. Microhardness values for the WC-10 and WC-15 vol.% steel samples were 12.3 ± 1.2 and 13.0 ± 0.9 GPa, respectively, whereas the fracture toughness values were 8.83 ± 0.48 and 8.81 ± 0.61 MPa·m 1/2 , respectively.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Design and Development of Novel Equiatomic Refractory Multi Principal elemental Alloys Based on MoNbTi System for Use in Irradiation Environments

Multi Principal Elemental Alloys (MPEA) have emerged as promising materials for next-generation nuclear reactors due to their exceptional irradiation resistance. Eight equiatomic MPEA based on the MoNbTi system, comprising of elements with low thermal neutron absorption cross-sections were explored using a combined approach employing empirical parameter estimations, and CALPHAD simulations by which the phases and elemental segregation observed in all the alloys in the as-cast state were predicted. Solution heat treatment at 1500°C transformed five alloys into single-phase matrix materials, enhancing homogeneity and reducing hardness. The densities of the alloys ranged between 6.47 to 7.68 g/cm3, hardness between 472 and 656 VHN, Young’s modulus between 142 GPa to 169 GPa, shear modulus between 54 GPa and 62 GPa, bulk modulus between 117 GPa to 194 GPa and Poisson’s ratio between 0.3 to 0.35. The in-situ high temperature Xray diffraction results, differential scanning calorimetry and dilatometry results up to 1000°C suggested the high temperature phase stability of the MPEA. Subsequent ageing heat treatment at 800 and 1000 oC for 96 hours revealed significant secondary phase precipitation in MoNbTiZr, MoNbTiZrV, and MoNbTiCrA. Oxidation studies at 800 oC for 24 hours in air revealed superior oxidation resistance and cubic rate law dependence in Cr containing MPEA especially in MoNbTiCrAl, while severe mass gain resulting in total disintegration and exfoliation in MoNbTiZr and MoNbTiZrV. This comprehensive study underscores the potential of novel MPEA as promising materials for advanced nuclear reactor applications, shedding light on their microstructural control, mechanical properties, thermal stability, and oxidation resistance.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS2012

Robust, Practical Adaptive Control for Launch Vehicles

A modern mechanization of a classical adaptive control concept is presented with an application to launch vehicle attitude control systems. Due to a rigorous flight certification environment, many adaptive control concepts are infeasible when applied to high-risk aerospace systems; methods of stability analysis are either intractable for high complexity models or cannot be reconciled in light of classical requirements. Furthermore, many adaptive techniques appearing in the literature are not suitable for application to conditionally stable systems with complex flexible-body dynamics, as is often the case with launch vehicles. The present technique is a multiplicative forward loop gain adaptive law similar to that used for the NASA X-15 flight research vehicle. In digital implementation with several novel features, it is well-suited to application on aerodynamically unstable launch vehicles with thrust vector control via augmentation of the baseline attitude/attitude-rate feedback control scheme. The approach is compatible with standard design features of autopilots for launch vehicles, including phase stabilization of lateral bending and slosh via linear filters. In addition, the method of assessing flight control stability via classical gain and phase margins is not affected under reasonable assumptions. The algorithm s ability to recover from certain unstable operating regimes can in fact be understood in terms of frequency-domain criteria. Finally, simulation results are presented that confirm the ability of the algorithm to improve performance and robustness in realistic failure scenarios.

Orr, Jeb. S.↗

DOE OSTI2014

Intrinsic Nanoscience of δ Pu-Ga Alloys: Local Structure and Speciation, Collective Behavior, Nanoscale Heterogeneity, and Aging Mechanisms

Because diffraction measurements are sensitive only to the long range average arrangement of the atoms in the coherent portion of a crystal, complementary local structure measurements are required for a complete understanding of the structure of a complex material. This is particularly an issue in solid solutions where even random distributions of a solute will result in nanometer-scale fluctuations in the local composition. The structure will be further complicated if collective and cooperative phenomena organize the solute distribution via longer range interactions between non-bonded solute sites. If the solute affects the phase stability then the question is raised of whether the atoms in domains with local compositions outside the limits of the bulk phase will rearrange into the structure stable for that composition and temperature or if the resulting stress would prevent such a local phase transition. If the former, then phase separated, heterogeneous structures at or below the diffraction limit will form. This nanometerscale competition between the phase transition and the epitaxial mismatch – exacerbated by the added strain if the transition involves a volume change – raises the potential for the formation of novel structures that do not occur in bulk material, e.g., fcc Fe. This coupling over multiple scales between inhomogeneity ordering, elastic forces, phase competition, and texture in the form of coexisting structures is a hallmark of martensites, a class of complex materials that includes δ-stabilized PuGa and that often exhibit correlated atomic and electronic properties. The enigmatic and extreme nature of Pu is consistent with its exhibiting unusual structural behavior of this type, including nanoscale heterogeneity in δ-stabilized PuGa and its enhanced homogeneity on aging that has been suggested based on earlier X-ray Absorption Fine Structure (XAFS) spectroscopy and x-ray pair distribution function (pdf) measurements. Measurements on a defined set of laboratory-prepared materials now corroborate and better describe this heterogeneity while additional aged samples demonstrate the role of heterogeneity in aging processes in Pu.

Conradson, Steven D.↗

NASA NTRS2012

Crystallographic Stability of Metastable Phase Formed by Containerless Processing in REFeO3 (RE: Rare-Earth Element)

Undercooling a melt often facilitates a metastable phase to nucleate preferentially. Although the classical nucleation theory shows that the most critical factor for forming a metastable phase is the interface free energy, the crystallographic stability is also indispensable for the phase to be frozen at ambient temperature. In compound materials such as oxides, authors have suggested that the decisive factors for forming a critical nucleus are not only the free energy difference but also the difference of the entropy of fusion between stable and metastable phases. In the present study, using REFeO3 (RE: rare-earth element) as a model material, we investigate the formation of a metastable phase from undercooled melts with respect to the competitive nucleation and crystallographical stabilities of both phases.

Kuribayashi, Kazuhiko↗

DOE OSTI2025

Thermally driven surface phase separation in intermetallic alloys

Intermetallic compounds are widely recognized for their high-temperature phase stability and resistance to composition and structural changes. However, we reveal athermally activated bulk-to-surface mass exchange mechanism that drives surface phase separation, resulting in the formation of surface precipitates with distinct composition andstructure from the bulk matrix. Using the archetypal β-NiAl system, we show that asymmetries in vacancy formation energies between Ni and Al atoms induce preferential Ni segregation to the surface, forming Ni-rich γ'-Ni 3 Al precipitates. By integrating in-situ electron microscopy, synchrotron X-ray absorption spectroscopy and first-principles computational modeling, we establish a direct mechanistic connection between bulk thermal defect dynamics, surface compositional evolution, and phase segregation behavior. This bulk-surface coupling mechanism can be a driver of surface phase separation in multicomponent alloys under thermal stress. In conclusion, these results refine the thermodynamic boundaries of intermetallic stability and provide insights into managingthe performance and durability of intermetallic alloys for demanding high-temperature applications.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Epitaxial growth and physical properties of Bi 2 Ru 2 O 7 thin films on YSZ(111) substrates

We systematically investigated the growth of Bi 2 Ru 2 O 7 thin films on a Y-stabilized ZrO 2 (111) substrate using pulsed laser deposition by mapping the influence of growth temperature and oxygen partial pressure on phase stability, lattice parameters, and cation ratio. The results show that the epitaxial stabilization requires a minimum growth temperature, which is rather insensitive to the pressure. Meanwhile, the Bi:Ru ratio decreases when increasing growth temperature or decreasing pressure. By constructing the temperature–pressure phase diagram, an optimal growth window within the epitaxial phase was established. On the other hand, the electrical resistivity remains at a similar level within the epitaxial phase with only subtle changes to the temperature dependence, indicative of the robustness of the conductivity against composition variation. Our study provides a foundation for future investigations on thin films and heterostructures that utilize Bi 2 Ru 2 O 7 .

Crystallography↗

DOE OSTI2022

Influence of Copper Composition on Cu 2 BaSn(S,Se) 4 Solution-Deposited Films and Photovoltaic Devices with Over 5% Efficiency

Cu 2 BaSn(S,Se) 4 is currently in the spotlight for prospective environmentally friendly, stable, thin-film solar cell application, with demonstrated device power conversion efficiency (PCE) exceeding 5% for vacuum-deposited absorbers. As suggested by first-principles calculations, experimental studies involving related Cu 2 ZnSn(S,Se) 4 and Cu(In,Ga)(S,Se) 2 absorbers prove that the detailed chemical composition typically plays a sensitive role in altering defects and electronic properties of these complicated compound semiconductors. Herein, the copper composition of Cu 2 BaSn(S,Se) 4 has been systematically modified, employing a solution-based deposition approach, to provide a more complete picture of the phase stability and optoelectronic property sensitivity for this material. X-ray diffraction and scanning electron microscopy show that phase purity is preserved over a film Cu content range of nominally 0.94 ≤ [Cu]/[Ba + Sn] ≤ 1.01. Terahertz spectroscopy and Hall effect measurements reveal that the majority carrier hole density of ~10 13 cm –3 and mobility (~5 cm 2 /V s), as well as the minority carrier lifetime (a bulk lifetime of 180 ps and a surface recombination velocity >106 cm/s), are nominally independent of Cu content. The champion PCEs exceed 4.7% for all copper compositions in the phase-pure region, with a record value of 5.1%, similar to the reported values for record vacuum-deposited devices. Furthermore, these results suggest that Cu 2 BaSn(S,Se) 4 films and solar cells (at the current performance level) may be less sensitive to Cu stoichiometry compared to kesterite materials and therefore may provide a more stable material platform to prepare thin-film solar cells.

(CBTSSe)↗

DOE OSTI2021

Magnetic ordering suppressed phase transformation of a TRIP-HEA during thermal cycling

Transformation-induced plasticity (TRIP) high-entropy alloys (HEAs) have drawn great attention as they present excellent mechanical properties, and their phase stability is critical for the underlying deformation mechanisms and the application temperature range. In this study, the kinetic phase transformation behavior of a dual-phase TRIP-HEA Fe 50 Mn 30 Co 10 Cr 10 (at. %) was probed by in situ neutron diffraction during thermal cycling between 293 and 425 K. Continuous austenitic and martensitic transformation were visualized through the evolution of hexagonal close-packed phase fraction during thermal cycling. Specifically, thanks to the magnetic sensitivity of neutron diffraction, it was found that the martensitic transformation under cooling became suppressed when the antiferromagnetic ordering started at ~326 K. This temperature was further confirmed as the Néel temperature by magnetization measurements. In this work, thermodynamic calculations revealed that the suppression effect on martensitic transformation is attributed to the consumption of the chemical driving force by the magnetic ordering. The magnetic ordering at such relatively high temperature is associated with the high Mn content. These findings shed light on a potential strategy to achieve better mechanical properties of Mn-containing alloys by manipulating the magnetic property through tuning the Mn content.

36 MATERIALS SCIENCE↗

DOE OSTI2017

Stabilization of ferroelectric phase in tungsten capped Hf0.8Zr0.2O2

We report on the stabilization of the ferroelectric phase in Hf0.8Zr0.2O2 with a tungsten capping layer. Ferroelectricity is obtained in both metal-insulator-metal (MIM) and metal-insulator-semiconductor (MIS) capacitors with highly-doped Si serving as the bottom electrode in the MIS structure. Ferroelectricity is confirmed from both the electrical polarization-voltage (P-V) measurement and X-Ray Diffraction analysis that shows the presence of an orthorhombic phase. High-resolution Transmission Electron Microscopy and Energy Dispersive X-ray spectroscopy show minimal diffusion of W into the underlying Hf0.8Zr0.2O2 after the crystallization anneal. This is in contrast to significant Ti and N diffusion observed in ferroelectric HfxZr1-xO2 commonly capped with TiN.

Karbasian, Golnaz↗

DOE OSTI2022

A Perspective on ferroelectricity in hafnium oxide: Mechanisms and considerations regarding its stability and performance

Ferroelectric hafnium oxides are poised to impact a wide range of microelectronic applications owing to their superior thickness scaling of ferroelectric stability and compatibility with mainstream semiconductors and fabrication processes. For broad-scale impact, long-term performance and reliability of devices using hafnia will require knowledge of the phases present and how they vary with time and use. In this Perspective article, the importance of phases present on device performance is discussed, including the extent to which specific classes of devices can tolerate phase impurities. Following, the factors and mechanisms that are known to influence phase stability, including substituents, crystallite size, oxygen point defects, electrode chemistry, biaxial stress, and electrode capping layers, are highlighted. Herein, discussions will focus on the importance of considering both neutral and charged oxygen vacancies as stabilizing agents, the limited biaxial strain imparted to a hafnia layer by adjacent electrodes, and the strong correlation of biaxial stress with resulting polarization response. Areas needing additional research, such as the necessity for a more quantitative means to distinguish the metastable tetragonal and orthorhombic phases, quantification of oxygen vacancies, and calculation of band structures, including defect energy levels for pure hafnia and stabilized with substituents, are emphasized.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Improving the Stability and Monodispersity of Layered Cesium Lead Iodide Perovskite Thin Films by Tuning Crystallization Dynamics [plus supplemental information]

Assembling halide perovskites into layered structures holds promise for addressing chemical and phase stability challenges; however, several other challenges need to be addressed to create efficient and stable halide perovskite devices. Layered halide perovskites (LHPs) suffer from a broad distribution of layer thicknesses and band gaps within thin films. Reducing polydispersity could substantially improve charge transport within LHP films and the performance of LHP-based solar cells. In this study, we focused on layering α-CsPbI 3 ((C 4 H 9 NH 3 ) 2 Cs n–1 PbnI 3n+1 ) thin films. We found that (C 4 H 9 NH 3 ) 2 Cs n–1 PbnI 3n+1 with nominal layer thicknesses of n = 1, 2, 3, and 4 can be deposited at temperatures as low as 100 °C, substantially below the phase-transition temperature of bulk α-CsPbI 3 . Furthermore, we demonstrated that incorporating solvents with high complexation strength into the precursor solution promotes the formation of intermediate phases within the thin film, slowing down LHP crystallite nucleation, eventually resulting in improved phase purity. By reducing decomposition rates through combined use of solvent complexes and thermal processing methods, we fabricated (C 4 H 9 NH 3 ) 2 CsPb 2 I 7 films that had improved phase purity, crystallinity, and film morphology. We also demonstrate that the improved phase purity resulted in photoluminescence with a maximum intensity corresponding to the targeted n = 2 phase. In conclusion, this work represents a step toward highly stable LHP thin films with narrow site-energy distribution.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Room-Temperature Deformation and Martensitic Transformation of Two Co-Cr-Based Alloys

Here, deformation of two Co-Cr alloys was studied by in situ synchrotron X-ray diffraction. Both alloys show stress-induced martensite transformation, which is affected by phase stabilities and transformation strains. Crystal structure of WC in Co-20Cr-15W-10Ni is identified. Compared with other phases present, it is elastically isotropic, exhibits high strength, and can elastically withstand strains exceeding 1 pct. Texture change during phase transformation is explained based on the crystal orientation relationship between γ- and ε-phases.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Interplay of strain and phase evolution of laser powder bed fusion Ti–6Al–4V

While additive manufacturing (AM) provides a method of producing geometrically complex and highly detailed structures, the generation of residual strain in AM processes like laser powder bed fusion (L-PBF) can negatively impact performance-enabling properties. In applications such as orthopedic implants, specific performance windows require optimized microstructures in order to obtain desirable properties from multi-phase alloys like Ti–6Al–4V. This research aims to quantify the microscale origins of strain in L-PBF manufactured Ti–6Al–4V by understanding how strain is distributed at the grain and sub-grain scale, the interplay between phase evolution and strain, and examining post-processing strain relief strategies to control these features. Model spinal cage implants were manufactured from Ti–6Al–4V powder via L-PBF and then subjected to strain relieving heat treatment cycles above and below the Ti–6Al–4V β transus as a function of time and cooling rate. Residual strain was then studied via high resolution electron backscatter diffraction (HR-EBSD), and 2D strain maps with sub-micron resolution were generated for each post-processing state. It was found that macroscale thermal strains decreased with heat treatment time, but additional contributions from phase stabilizing residual strains retained primarily in the α' grains as lattice distortive strain remained. Additionally, the retention of β phase significantly changed the strain and dislocation distribution while reducing overall residual strain. In conclusion, these results were validated and reinforced with 3D mesoscopic micromechanical modeling of strain behavior across simulated microstructures, confirming that the local lattice dilation of α’ martensite is a primary contributor of microscale strain generation and retention in L-PBF Ti–6Al–4V.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Robust Dissimilar Metal Friction Welded Spool for Enhanced Capability for Steam Power Components (Final Program Report)

This project successfully demonstrated the feasibility and advantages of producing durable, friction-welded dissimilar-metal spools, both with and without transition pieces, as well as the use of advanced oxidation-protective coatings for steam power applications. The work encompassed the optimization and full-scale production of NFA tubing, overcoming manufacturing and processing challenges to achieve enhanced strength, creep, and fatigue properties validated by extensive microstructural characterization. Optimized welding techniques were developed and refined for joining dissimilar materials, resulting in defect-free welds optimized for both low- and high-pressure boiler circuits. Systematic evaluation of welding parameters, coupled with heat treatments, ensured reliable performance and minimized weld defects such as banding and cracking. Comprehensive mechanical and non-destructive testing, including tensile, bend, fatigue, and CT scanning, confirmed the superior integrity and durability of the friction-welded joints under representative service conditions. To address oxidation-related degradation, a range of protective alloy coatings—such as IN625, APMT, Duplex 2507, and FeCrAlY—were selected and evaluated for their ability to counteract oxide notch formation at dissimilar metal interfaces. These coatings demonstrated improved oxidation resistance and long-term stability under thermal cycling, thereby extending weld service life. Thermal cyclic testing and long-term studies captured the phase stability and diffusion behavior of coated and uncoated configurations. Validated models for low-cycle fatigue (LCF), creep, and thermal mechanical fatigue (TMF) were developed to predict component life and failure modes. These models confirmed that friction-welded configurations exhibited significantly enhanced performance compared to conventional gas-tungsten arc welding (GTAW), with up to 7× improvement in creep resistance and at least 2× enhancement in fatigue properties. The introduction of a tailored transition piece further reduced thermally induced strains, enhancing fatigue life. The results demonstrate a robust pathway for retrofitting existing steam fleet components and upgrading future equipment to deliver substantially improved cold-start cycling behavior and reduction of unplanned outages due to premature weld failures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

Stability, growth, and doping of In 2 (Si, Ge) 2 O 7 : Promising n -type wide-bandgap semiconductors

In this paper, we investigate, computationally and experimentally, the phase stability, electronic structure properties, and the propensity for n-type doping of In 2 X 2 O 7 (X = Si, Ge) ternary oxides. This family of materials contains promising novel wide-gap semiconductors based on their estimated high n-type Baliga figures of merit and acceptable thermal conductivity for power electronics applications. Here, we predict that both In 2 Si 2 O 7 and In 2 Ge 2 O 7 are n-type dopable, with Zr providing between 10 16 and above 10 21 cm −3 net donor concentrations under O-poor conditions, depending on the chemistry, structure (ground-state thortveitite or high-pressure pyrochlore), and synthesis temperature. To verify our predictions, we synthesize Zr-doped In 2 Ge 2 O 7 in the thortveitite structure and measure its electrical properties. Initial thin-film growth and annealing lead to polycrystalline thin films with bandgaps over 4 eV and confirm Zr doping predictions by achieving electron concentrations at 10 14 –10 16 cm −3 even under O-rich conditions. While future epitaxial growth development is still needed, this study establishes In 2 X 2 O 7 as promising n-type wide-gap semiconductors for power electronic applications.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Enhanced stability and ordering of 2D MnBi2Se2Te2

This dataset includes density functional theory and quantum Monte Carlo calculations on MnBi(Se(1-x)Te(x))4 system for its phase stability and defect formation energies. The data supports publication "Increased Defect Resistance and Ordering in MnBi2(Se(1–x)Te(x))4 via Accurate Diffusion Monte Carlo" (https://doi.org/10.1021/acs.jpcc.5c04299).

36 MATERIALS SCIENCE↗

DOE OSTI2016

Structural, optical, and electrical properties of SmNbO{sub 4}

Rare-earth orthoniobates constitute a class of materials that has been exploited due to their interesting physical properties depending on the lanthanide element. Besides paramagnetism, ferroelasticity, and negative compressibility, these materials are known by their interesting optical properties and mixed types of conduction processes (protonic, ionic, and electronic). In this work, two types of SmNbO{sub 4} samples were studied: polycrystalline samples, prepared by a sol-gel route using the Pechini method, and single crystalline fibres grown by the Laser Floating Zone technique. These samples were structurally characterized based on powder and single-crystal X-ray diffraction studies. A metastable tetragonal phase, stabilized by grain size, was identified in the synthesized powders. After a sintering process of such powders, a single monoclinic phase was obtained. Complementarily, scanning electron microscopy and Raman spectroscopy analyses were performed to these samples. Photoluminescence and photoluminescence excitation spectroscopic studies allowed identifying more than one optically active centre of the trivalent samarium ion in the analysed material. Impedance spectroscopy measurements have shown a large variation of the ac conductivity as a function of temperature, assigned to a protonic conduction and to native ionic conduction mechanisms.

36 MATERIALS SCIENCE↗