SEARCH · Search NASA
Results for “PLASMA ARC”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Advanced Characterization of Microwave Melt Cast Uranium
For the last decade, the use of microwave (MW) melting and casting technology for processing uranium (U) has been under development at Y-12 National Security Complex in Oak Ridge, TN [2] . Their objective has been to determine if MW is a viable option to replace conventional vacuum induction melting (VIM) for some U part types. Some of the benefits of using MW technology are minimizing processing steps and decreasing impurity content by changing crucible material, which will help to lower costs and improve machinability, respectively. While Y-12 has shown success using a MW melting and casting process to make U parts [4, 5], it is still a relatively new technology for casting metals, and there are several unknowns with respect to how the material properties compare to conventional VIM cast U. One major concern, associated with MW casting of metals, is superheating, which can cause arcing or plasma formation in a part and result in non-uniform material properties. Therefore, studying the anisotropy in MW cast metals in terms of pertinent properties is highly relevant. Specifically, the properties of interest here are deformation behavior and mechanical properties of U tested at different strain rates and weldability of thin wall sections. In order to address concerns about high strain rate mechanical properties, prototype MW-U parts (processed in 2009) were sent to LLNL in 2015 for advanced materials testing. The parts received had relatively thin walls (~6 mm), so Split Hopkinson Pressure Bar was selected as a method for dynamic mechanical testing (strain rate of ~103s-1) since most other high-rate (HR) tests require much larger sample dimensions. A VIM-U part from Y-12 was not available at the time of the study, so a VIM part from Idaho National Laboratory, cast into a rectangular block, was used here for comparison.
Oxidation Resistant, Cr Retaining, Electrically Conductive Coatings on Metallic Alloys for SOFC Interconnects
This report describes significant results from an on-going, collaborative effort to enable the use of inexpensive metallic alloys as interconnects in planar solid oxide fuel cells (SOFCs) through the use of advanced coating technologies. Arcomac Surface Engineering, LLC, under the leadership of Dr. Vladimir Gorokhovsky, is investigating filtered-arc and filtered-arc plasma-assisted hybrid coating deposition technologies to promote oxidation resistance, eliminate Cr volatility, and stabilize the electrical conductivity of both standard and specialty steel alloys of interest for SOFC metallic interconnect (IC) applications. Arcomac has successfully developed technologies and processes to deposit coatings with excellent adhesion, which have demonstrated a substantial increase in high temperature oxidation resistance, stabilization of low Area Specific Resistance values and significantly decrease Cr volatility. An extensive matrix of deposition processes, coating compositions and architectures was evaluated. Technical performance of coated and uncoated sample coupons during exposures to SOFC interconnect-relevant conditions is discussed, and promising future directions are considered. Cost analyses have been prepared based on assessment of plasma processing parameters, which demonstrate the feasibility of the proposed surface engineering process for SOFC metallic IC applications.
Synchronizing-Cone Blanks with a Sprayed Steel Coating for Vehicle Transmissions
Blanks for synchronizing cones with a sprayed steel coating that are capable of operating in oil within vehicle transmissions are considered. A plasma-spraying method is developed for the manufacture of such components.
Electrolytic Plasma Surface Polishing of Complex Components Produced by Selective Laser Melting
The applicability of electrolytic plasma surface polishing to complex components produced by selective laser melting (SLM) is analyzed. By electrolytic plasma polishing by electrolyte spraying, the surface quality of components produced by SLM may be improved. This technology is found to decrease the surface roughness from R{sub a} = 5.6 μm to 1.4 μm. The optimal pressure of the electrolyte jet is 0.02–0.05 MPa. At high pressures, the process becomes unstable. By electrolytic plasma polishing on the basis of electrolyte jets, uniform external and internal surface roughness of components produced by SLM may be ensured.
Blanks for Bronze-Coated Frictional Disks Used in Vehicle Transmissions
The development of blanks for frictional disks with a bronze coating is considered. The coatings are produced by means of plasma spraying. The frictional disks are intended for used in vehicle transmissions.
THE EMITTANCE OF MATERIALS SUITABLE FOR USE AS SPACECRAFT RADIATOR COATINGS
Measurements of total hemispherical emittance for materials suitable for high-temperature spacecraft radiation coatings
Energy storage capacitors for pulsed plasma thrustors.
Energy storage film capacitors for pulsed plasma thrustors developed for coaxial plasma gun and Pulsed Arc Gun
Development of a stable ultraviolet source and techniques for accurate radiometry Status report, 1 Oct. - 31 Dec. 1965
Stable ultraviolet source and accurate radiometric techniques
Experimental Investigation of Stagnation Point Electrodes
Space resolved measurements for electrode in stagnation flow of arc heated plasma
Diagnosis of high-density, highly ionized nitrogen wind tunnel flows.
High density highly ionized nitrogen flow in plasma wind tunnel
Energy storage capacitors for pulsed plasma thrusters.
Energy storage film capacitors for pulsed plasma thrustors developed for coaxial plasma gun and pulsed arc gun
Heat transfer, development length, and friction factor correlations for the asymptotic region of a laminar arc constrictor
Equilibrium model of laminar arc constrictor plasma generator, correlating heat transfer, wall shear stress, friction factor and development length
Measurements of electrical and thermal conductivity of hydrogen, nitrogen, and argon at high temperatures
Hydrogen, nitrogen and argon electrical and thermal conductivity measured at high temperature using electric arc as plasma source
Microwave measurement of the electron density profile in a supersonic arc jet
Microwave probe for measuring electron density profile in supersonic arc jet plasma
Exhaust flow and propulsion characteristics of a pulsed MPD arc thruster.
Experimental investigation of the near-field, megawatt, single-shot exhaust for the self-field and auxiliary field cases (0 to 2 tesla) for a pulsed MPD arc thrustor. Plasma impact pressure and number density are correlated to provide velocity profiles (30,000 to 70,000 m/sec), thrust (10 to 120 N), impulse (3 to 16 N-sec) and mass accounting. The data agree with Hugel's self-field theory for the case where thrust is produced entirely by electromagnetic force. The data show that the thrust monotonically increases with auxiliary field.
Artificial meteor ablation studies - Iron oxides.
Artificial meteor ablation was performed on natural minerals composed predominantly of magnetite and hematite by using an arc-heated plasma stream of air. Analysis indicates that most of the ablated debris was composed of two or more minerals. Wustite, a metastable mineral, was found to occur as a common product. The 'magnetite' sample, which was 80% magnetite, 14% hematite, 4% apatite, and 2% quartz, yielded ablated products consisting of more than 12 different minerals. Magnetite occurred in 91% of the specimens examined, hematite in 16%, and wustite in 30%. The 'hematite' sample, which was 96% hematite and 3% quartz, yielded ablated products consisting of more than 13 different minerals. Hematite occurred in 47% of the specimens examined, magnetite in 60%, and wustite in 28%. The more volatile elements (Si, P, and Cl) were depleted by about 50%. This study has shown that artificially created ablation products from iron oxides exhibit unique properties that can be used for identification.
High temperature antenna development for space shuttle, volume 1
Design concepts for high temperature flush mounted Space Shuttle Orbiter antenna systems are discussed. The design concepts include antenna systems for VHF, L-band, S-band, C-band and Ku-band frequencies. The S-band antenna system design was completed and test hardware fabricated. It was then subjected to electrical and thermal testing to establish design requirements and determine reuse capabilities. The thermal tests consisted of applying ten high temperature cycles simulating the Orbiter entry heating environment in an arc tunnel plasma facility and observing the temperature distributions. Radiation pattern and impedance measurements before and after high temperature exposure were used to evaluated the antenna systems performance. Alternate window design concepts are considered. Layout drawings, supported by thermal and strength analyses, are given for each of the antenna system designs. The results of the electrical and thermal testing of the S-band antenna system are given.