Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA FOCUS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

A hybrid Boltzmann electrons and PIC ions model for simulating transient state of partially ionized plasma

A robust and stable numerical algorithm is developed for the hybrid method of particle-in-cell ions and Boltzmann distribution of electrons. A different approach to estimate the electron density reference and its proper potential reference is developed to overcome the problems of instability and divergence of previous approaches. The electron density reference is precisely calculated, the tolerance criterion is well-defined, and convergence is guaranteed by applying bi-section golden rule. To increase the rate of convergence, an external loop is incorporated with the bi-section golden rule to vary the brackets. The validity of the method is proved by comparing the simulated result with well-known analytical formula. The simulated sheath potential at a floating wall fit well to the analytic result. The collisionless ion kinetic energy acquired from the voltage difference between the pre-sheath and ion sheath does not violate the Bohm sheath criterion. For work that focuses on the plasma process at the ion sheath and not on the generation of plasma, this method saves simulation time by avoiding time consuming particle or kinetic model of electrons. The new approach reproduces the ion density profile at the ion sheaths region of a plasma with bi-Maxwellian electrons coupling with radio-frequency (RF) signal by introducing two Boltzmann relations to describe the cold and hot thermal electrons for the first time.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Physics of Ultra-High Energy Density Relativistic Plasmas from Ordered Nanostructures

This award funded a four-year program at Colorado State University on the physics of ultra-high energy density plasmas generated by focusing femtosecond, >1021 Wcm-2 laser pulses onto ordered nanowire arrays. We used the ALEPH petawatt-class Ti:Sa laser with its high contrast 400 nm second harmonic beamline to irradiate arrays of Ni and TiO2 nanowires made by template assisted electrodeposition and atomic layer deposition over a wide range of average densities. We met two of the three original project goals: radial ion acceleration via doppler shifted K shell emission, and time and spectrally resolved K shell measurements. The main experimental advance was integrating the Lawrence Livermore National Laboratory (LLNL) TREX ultrafast x-ray streak camera with a suite of spherically bent quartz Bragg crystal spectrometers built using Princeton Plasma Physics Laboratory (PPPL) methodology. This is the first TREX-on-bent-quartz setup fielded at a femtosecond, >1021 Wcm-2 facility. It is now a permanent diagnostic at ALEPH and is offered to the LaserNetUS user community. The program produced three peer reviewed journal articles that acknowledge this award. The platform will continue at the upgraded CSU ATLAS facility, where the ALEPH laser is being upgraded to 2 PW.

Hollinger, Reed [Colorado State University]↗

Invited Review Article: The electrostatic plasma lens

The fundamental principles, experimental results, and potential applications of the electrostatic plasma lens for focusing and manipulating high-current, energetic, heavy ion beams are reviewed. First described almost 50 years ago, this optical beam device provides space charge neutralization of the ion beam within the lens volume, and thus provides an effective and unique tool for focusing high current beams where a high degree of neutralization is essential to prevent beam blow-up. Short and long lenses have been explored, and a lens in which the magnetic field is provided by rare-earth permanent magnets has been demonstrated. Applications include the use of this kind of optical tool for laboratory ion beam manipulation, high dose ion implantation, heavy ion accelerator injection, in heavy ion fusion, and other high technology.

43 PARTICLE ACCELERATORS↗

A statistical study of EMIC waves observed by Cluster. 1. Wave properties. EMIC Wave Properties

Electromagnetic ion cyclotron (EMIC) waves are an important mechanism for particle energization and losses inside the magnetosphere. In order to better understand the effects of these waves on particle dynamics, detailed information about the occurrence rate, wave power, ellipticity, normal angle, energy propagation angle distributions, and local plasma parameters are required. Previous statistical studies have used in situ observations to investigate the distribution of these parameters in the magnetic local time versus L-shell (MLT-L) frame within a limited magnetic latitude (MLAT) range. In our study, we present a statistical analysis of EMIC wave properties using 10 years (2001–2010) of data from Cluster, totaling 25,431 min of wave activity. Due to the polar orbit of Cluster, we are able to investigate EMIC waves at all MLATs and MLTs. This allows us to further investigate the MLAT dependence of various wave properties inside different MLT sectors and further explore the effects of Shabansky orbits on EMIC wave generation and propagation. Thus, the statistical analysis is presented in two papers. OUr paper focuses on the wave occurrence distribution as well as the distribution of wave properties. The companion paper focuses on local plasma parameters during wave observations as well as wave generation proxies.

58 GEOSCIENCES↗

Experimental approaches for studying non-equilibrium atmospheric plasma jets

This work reviews recent research efforts undertaken in the area non-equilibrium atmospheric plasma jets with special focus on experimental approaches. Physics of small non-equilibrium atmospheric plasma jets operating in kHz frequency range at powers around few Watts will be analyzed, including mechanism of breakdown, process of ionization front propagation, electrical coupling of the ionization front with the discharge electrodes, distributions of excited and ionized species, discharge current spreading, transient dynamics of various plasma parameters, etc. Experimental diagnostic approaches utilized in the field will be considered, including Rayleigh microwave scattering, Thomson laser scattering, electrostatic streamer scatterers, optical emission spectroscopy, fast photographing, etc.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetized laser–plasma interactions in high-energy-density systems: Parallel propagation

In this study, we investigate parametric processes in magnetized plasmas, driven by a large-amplitude pump light wave. Our focus is on laser–plasma interactions relevant to high-energy-density (HED) systems, such as the National Ignition Facility and the Sandia MagLIF concept. We present a self-contained derivation of a “parametric” dispersion relation for magnetized three-wave interactions, meaning the pump wave is included in the equilibrium, similar to the unmagnetized work of Drake et al., Phys. Fluids 17, 778 (1974). For this, we use a multi-species plasma fluid model and Maxwell's equations. The application of an external B field causes right- and left-polarized light waves to propagate with differing phase velocities. This leads to Faraday rotation of the polarization, which can be significant in HED conditions. Phase-matching and linear wave dispersion relations show that Raman and Brillouin scattering have modified spectra due to the background B field, though this effect is usually small in systems of current practical interest. We study a scattering process we call stimulated whistler scattering, where a light wave decays to an electromagnetic whistler wave (ω≲ω ce ) and a Langmuir wave. This only occurs in the presence of an external B field, which is required for the whistler wave to exist.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collisional and collisionless shocks

Shock waves are one of the most common plasma phenomena. They play a significant role in astrophysical and magnetospheric environments, as well as in laboratory plasmas. The paper focuses on two issues that underline important similarities and dissimilarities between collisional and collisionless shocks. The two types of shocks are similar in that they can be formed by the overtaking mechanism. We demonstrate that geometrical structures appearing early in the process of shock formation from the generic smooth initial state are quite universal and similar in both cases. Characterization of these structures (dubbed here the “mussel-shell”) is presented. Alongside with these similarities, there exist also significant differences between the two types of shocks. The classical collisional shocks usually connect two well-defined equilibrium states (those before and after the shock transition). Each of these equilibrium states is characterized by the thermodynamic parameters of density, temperature, and pressure whose upstream and downstream values are related by the continuity of mass, momentum, and energy flux. In the collisionless plasmas, however, this description does not work: the final state can be any of the much broader class of states constrained only by the requirement of being stable with respect to collisionless plasma instabilities. To find a final state (which does not have to be Maxwellian) one now has to follow the evolution of the system through the whole transition, and a lot of universality is lost. In some situations even the separation of scales between the global flow and shock transition may be lost. Taken together, these phenomena reveal a fascinating interplay of hydrodynamics, statistical mechanics, and plasma physics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spark Plasma Sintering (SPS) Update for the Fuel Conversion Effort at the Transient Reactor Test Facility

Over the lifetime of the Transient Reactor Test Facility (TREAT) reactor from 1959 to 1994, a series of historical tests disclosed certain material specific requisites for irradiation testing variables resulted in negligible structural damage after exposure to the reactor and multiple experiments. Comparable fuel design, material testing, and qualifications needs to occur for the high-enriched uranium (HEU) to low enriched uranium (LEU) fuel conversion (<20% U235) of TREAT. This includes, retaining a uniform precipitate dispersion of fueled UO2 micron-size particles throughout a graphite-moderating matrix, where high-density graphite is in direct contact with the fuel and acts as a moderator. On that note, the design of future LEU reactor TREAT fuel core will consider the relative sizing and spacing of fuel as well as the retention of graphite in accordance with the expected thermal, neutron, and energy portfolio for future conversion. In light of the above, LEU conversion fuel blocks currently being manufactured must undergo critical materials testing, irradiation, and examination to determine effects on the manufactured replacement fuel blocks at the millimeter to sub-micron size scale. Herein, we will report and update the community on value-added studies focusing on spark plasma sintering as an alternative technique to fabricate high density graphite dispersion fuel.

36 MATERIALS SCIENCE↗

Application of Plasma FIB to Analyze a Single Oxide Inclusion in Steel

We demonstrate that Plasma Dual Beam focused ion beam (PFIB) milling can be used for high-resolution three-dimensional chemical study of a single non-metallic inclusion in steel. A CaO-Al{sub 2}O{sub 3}-MgO inclusion (~ 10 μm) on a polished cross-section of steel sample was located and milled using a Xe{sup +} ion beam. A secondary electron image and EDS map of every section were recorded and subsequently processed to show the 3D chemistry and morphology of the inclusion.

36 MATERIALS SCIENCE↗

Diagnostic x-ray source using electrons produced by a 100 J-class picosecond laser

Many laser-based high-energy-density science (HEDS) facilities have one or more short-pulse (sub- to few-picosecond) laser beams for diagnostics. For the past decade, we have been developing a novel x-ray probing capability using such picosecond lasers interacting with an underdense plasma to produce relativistic electrons. The ultimate goal of these experiments is to demonstrate a new type of x-ray backlighter using the short-pulse ARC laser at the National Ignition Facility (NIF). Before this diagnostic is fielded at the NIF, it is critical to demonstrate the viability and reproducibility of the x-ray source on comparable high-power short-pulse laser systems. We present experiments that were carried out with the OMEGA EP laser at the University of Rochester’s laboratory for laser energetics. In these experiments, high-energy electrons are produced through a combination of the self-modulation instability and direct laser acceleration in an underdense gas jet. These electrons generate directional x-rays with characteristic energies up to several tens of keV as they execute betatron motion in the ion channel, and the inverse Compton scattering process generates even harder x-rays, with characteristic photon energies of 60–240 keV. When implemented on the OMEGA EP laser(s), this x-ray source yields results that are comparable to those obtained recently on the short-pulse Titan laser at the Jupiter Laser Facility at Lawrence Livermore National Laboratory, after accounting for differences in laser energy, peak intensity, focusing f/#, and plasma source. Applications of such an x-ray source for HEDS experiments are discussed.

backlighter↗

Using Xe Plasma FIB for High-Quality TEM Sample Preparation

Here, a direct comparison between electron transparent transmission electron microscope (TEM) samples prepared with gallium (Ga) and xenon (Xe) focused ion beams (FIBs) is performed to determine if equivalent quality samples can be prepared with both ion species. We prepared samples using Ga FIB and Xe plasma focused ion beam (PFIB) while altering a variety of different deposition and milling parameters. The samples’ final thicknesses were evaluated using STEM-EELS $\textit{t/λ}$ data. Using the Ga FIB sample as a standard, we compared the Xe PFIB samples to the standard and to each other. We show that although the Xe PFIB sample preparation technique is quite different from the Ga FIB technique, it is possible to produce high-quality, large area TEM samples with Xe PFIB. We also describe best practices for a Xe PFIB TEM sample preparation workflow to enable consistent success for any thoughtful FIB operator. For Xe PFIB, we show that a decision must be made between the ultimate sample thickness and the size of the electron transparent region.

47 OTHER INSTRUMENTATION↗

Electric-field enhancement and ion-flow focusing at the multiwire cathode of a high-current plasma-filled diode

The time evolution of an unsteady ion sheath in the presence of cylindrical protrusions at the cathode is studied numerically in a two-dimensional model. The calculations demonstrate the enhancement of the electric field and the focusing of the ion flow at the protrusion vertices. It is shown that, in the stage of the sheath formation, in addition to the electrostatic focusing of the ion flux, there is also focusing caused by the curvature of the plasma boundary around a protrusion. The results of calculations agree satisfactorily with the experimental data on the delay time of explosive emission at the multiwire cathode of a high-current plasma-filled diode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-focusing of a Gaussian electromagnetic beam in a multi-ions plasma

In this paper, the authors have developed a formulation for the dependence of electron and ion densities on the irradiance of an electromagnetic beam in a plasma with multiply charged ions, corresponding to collisional, ponderomotive, and relativistic-ponderomotive nonlinearities and different electron/ion temperatures; consequently, the corresponding expressions for the electron density modification in the presence of an electromagnetic (em) field have been derived. Paraxial approach in the vicinity of intensity maximum has been adopted to analyze the propagation characteristics of an em beam in such plasmas; on the basis of this analysis, critical curves and self-focusing curves have been computed numerically and graphically illustrated. For a numerical appreciation of the analysis, we have specifically carried out the computations for the simultaneous presence of singly and doubly charged ions in the plasma. As an important outcome, it is seen that the nonlinear effects (and hence self-focusing) get suppressed in the presence of multiply ionized ions; the conditions for the three modes of em-beam propagation viz. oscillatory focusing/defocusing and steady divergence have been discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Particle acceleration and plasma dynamics during magnetic reconnection in the magnetically dominated regime

Magnetic reconnection is thought to be the driver for many explosive phenomena in the universe. The energy release and particle acceleration during reconnection have been proposed as a mechanism for producing high-energy emissions and cosmic rays. We carry out two- and three-dimensional (3D) kinetic simulations to investigate relativistic magnetic reconnection and the associated particle acceleration. The simulations focus on electron–positron plasmas starting with a magnetically dominated, force-free current sheet (σ≡B{sup 2}/(4πn{sub e}m{sub e}c{sup 2})≫1). For this limit, we demonstrate that relativistic reconnection is highly efficient at accelerating particles through a first-order Fermi process accomplished by the curvature drift of particles along the electric field induced by the relativistic flows. This mechanism gives rise to the formation of hard power-law spectra f∝(γ−1){sup −p} and approaches p = 1 for sufficiently large σ and system size. Eventually most of the available magnetic free energy is converted into nonthermal particle kinetic energy. An analytic model is presented to explain the key results and predict a general condition for the formation of power-law distributions. The development of reconnection in these regimes leads to relativistic inflow and outflow speeds and enhanced reconnection rates relative to nonrelativistic regimes. In the 3D simulation, the interplay between secondary kink and tearing instabilities leads to strong magnetic turbulence, but does not significantly change the energy conversion, reconnection rate, or particle acceleration. This study suggests that relativistic reconnection sites are strong sources of nonthermal particles, which may have important implications for a variety of high-energy astrophysical problems.

79 ASTRONOMY AND ASTROPHYSICS↗

Ion Temperature Fluctuations in ELMy H-mode of the X3 EC-heated Plasmas on TCV

This paper focuses on interpreting variations in the NPA measured energy distribution of neutral fluxes from the TCV high density H-mode plasma discharges with strong third harmonic electron cyclotron heating (P{sub X3}>P{sub {omega}}). Two quasi-stationary regimes: ELMy H-mode and ELM-free H-mode, routinely and reproducibly obtained in TCV, with a plasma density 5-10x10{sup 19} m{sup -3}, electron temperature 2-3 keV and ion temperature of 0.7-1.0 keV. The ELMy X3-heated H-mode plasma on TCV is significantly perturbed by ELMs, sawteeth activity and modes. In X3-heated plasmas ELMs are characterised by increased amplitudes and lower frequencies than are typical in ohmic H-modes with strong sawteeth synchronised with ELM cycle. The energy losses per ELM can exceed the 15% of the total stored energy and the plasma density and electron temperature profiles were resolved during the ELM cycle. NPA measurements in the presence of ELMs and sawteeth cannot be explained with the classical theory of two-body Coulomb electron-ion collisions alone. Additional effects (such as a modification of the ion temperature radial profile and/or ion redistribution in the coordinate and velocity space due to plasma perturbations) must be considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulating the effects of timing and energy stability in a laser wakefield accelerator with external injection

One of the most compelling reasons to use external injection of electrons into a laser wakefield accelerator is to improve the stability and reproducibility of the accelerated electrons. We have built a simulation tool based on particle tracking to investigate the expected output parameters. Specifically, we are simulating the variations in energy and bunch charge under the influence of variations in laser power and timing jitter. In these simulations a a{sub 0} = 0.32 to a{sub 0} = 1.02 laser pulse with 10% shot-to-shot energy fluctuation is focused into a plasma waveguide with a density of 1.0x10{sup 24} m{sup -3} and a calculated matched spot size of 50.2 {mu}m. The timing of the injected electron bunch with respect to the laser pulse is varied from up to 1 ps from the standard timing (1 ps ahead or behind the laser pulse, depending on the regime). The simulation method and first results will be presented. Shortcomings and possible extensions to the model will be discussed.

43 PARTICLE ACCELERATORS↗

Creation of deep blue light emitting nitrogen-vacancy center in nanosized diamond

This paper reports on the formation of complex defect centers related to the N3 center in nanosized diamond by employing plasma immersion and focused ion beam implantation methods. He{sup +} ion implantation into nanosized diamond “layer” was performed with the aim of creating carbon atom vacancies in the diamond structure, followed by the introduction of molecular N{sub 2}{sup +} ion and heat treatment in vacuum at 750 °C to initiate vacancy diffusion. To decrease the sp{sup 2} carbon content of nanosized diamond formed during the implantation processes, a further heat treatment at 450 °C in flowing air atmosphere was used. The modification of the bonding properties after each step of defect creation was monitored by Raman scattering measurements. The fluorescence measurements of implanted and annealed nanosized diamond showed the appearance of an intensive and narrow emission band with fine structures at 2.98 eV, 2.83 eV, and 2.71 eV photon energies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of five-moment two-fluid modeling for Z-pinch physics

The Z-pinch m = 0 instability as well as its stabilization by radially sheared axial flow is studied using the nonlinear ideal five-moment twofluid (5M2F) model with an extension of that model to include Braginskii heat and momentum transport. Using the ideal 5M2F model, linear growth rate results are compared with prior work using MHD and Hall MHD. At small normalized wavenumber, 1 < k a < 4 , where a is the effective pinch radius, 5M2F results agree with Hall MHD within 20% in scenarios without radially sheared axial flow. With the sheared flow and focusing on ka = 10/3, agreement with Hall MHD is excellent. In the limit of small ion inertial length, results also match with MHD. A comparison with PIC modeling of shear-free m = 0 stability focuses on a plasma scenario based on recent experimental results. In a scan of mode wavenumber, ideal 5M2F results are qualitatively similar to PIC: the growth rate rises to a peak at a moderate wavenumber and declines at a large wavenumber in contrast to MHD results, which show the saturation of the growth rate with the increasing wavenumber rather than a decline. The peak normalized 5M2F growth rate is &#x3B3; &#x3C4; A = 1.5 , where sA is the Alfven transit time across the pinch. The peak occurs at normalized wavenumber ka = 10. For comparison, PIC results have a peak growth of &#x3B3; &#x3C4; A = 0.77 at ka = 5. Including Braginskiibased closure of the 5M2F model does not qualitatively change the ideal results in this particular case. Nonlinear saturation is studied using the 5M2F model with the dissipative Braginskii-based closure in cases with pinch-edge sheared-flow speed equal to half the Alfven speed. Nonlinear mixing due to the sheared flow yields a quasi-steady state after modest losses of pinch ion inventory and pinch thermal energy, approximately 30% and 10%, respectively. 5M2F modeling captures the essential physics of m = 0 instability and offers a computationally tractable route to high-fidelity modeling of 3D Z-pinch behavior, including m = 1 instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗