Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Thermal modelling of various thermal barrier coatings in a high heat flux rocket engine

Traditional Air Plasma Sprayed (APS) ZrO2-Y2O3 Thermal Barrier Coatings (TBC's) and Low Pressure Plasma Sprayed (LPPS) ZrO2-Y2O3/Ni-Cr-Al-Y cermet coatings were tested in a H2/O2 rocked engine. The traditional ZrO2-Y2O3 (TBC's) showed considerable metal temperature reductions during testing in the hydrogen-rich environment. A thermal model was developed to predict the thermal response of the tubes with the various coatings. Good agreement was observed between predicted temperatures and measured temperatures at the inner wall of the tube and in the metal near the coating/metal interface. The thermal model was also used to examine the effect of the differences in the reported values of the thermal conductivity of plasma sprayed ZrO2-Y2O3 ceramic coatings, the effect of 100 micron (0.004 in.) thick metallic bond coat, the effect of tangential heat transfer around the tube, and the effect or radiation from the surface of the ceramic coating. It was shown that for the short duration testing in the rocket engine, the most important of these considerations was the effect of the uncertainty in the thermal conductivity of temperatures (greater than 100 C) predicted in the tube. The thermal model was also used to predict the thermal response of the coated rod in order to quantify the difference in the metal temperatures between the two substrate geometries and to explain the previously-observed increased life of coatings on rods over that on tubes. A thermal model was also developed to predict heat transfer to the leading edge of High Pressure Fuel Turbopump (HPFTP) blades during start-up of the space shuttle main engines. The ability of various TBC's to reduce metal temperatures during the two thermal excursions occurring on start-up was predicted. Temperature reductions of 150 to 470 C were predicted for 165 micron (0.0065 in.) coatings for the greater of the two thermal excursions.

Nesbitt, James A.↗

The Effects of Plasma Application on Radish Seeds with Implications for Space Crop Production

In extended space missions, the astronaut diet will consist mostly of prepackaged foods. This could result in nutritional deficiencies due to the gradual breakdown of certain vitamins. To address this deficiency, fresh produce must be grown from seed during spaceflight. Stored seeds, however, can be vulnerable to microbial contamination which could jeopardize plant health and crop food safety. To alleviate this concern, the current practice is to sanitize seeds on the ground before spaceflight to the International Space Station (ISS). Methods of seed sanitization include alcohol soaking and chlorine gas fumigation, which have harmful effects on the environment and human health. Plasma application is a new sanitization approach that avoids these negative side effects while potentially elevating germination rate and improving growth rate; yet plasma application requires specific exposure time, power, and pressure to achieve these benefits. In the present study, Raphanus sativus ‘Cherry Belle’ radish seeds were exposed to either low pressure (Diener) plasma or atmospheric pressure plasma for varying increments of time (30s-1200s). Data collected includes immediate germination rate (viability) and microbial log reduction. Additionally, seeds were stored for later germination rate testing. Microbial assay controls have highlighted variability in initial microbial load between individual seeds, and further work is being performed to determine the standard microbial load of an untreated seed. In some samples, a negative log reduction was observed after plasma treatment encouraging further study to determine if the plasma is perforating the seed coat and releasing endophytic microbes. Treatment with Diener plasma shows promising microbial log reduction, but lower viability. In contrast, treatment with atmospheric pressure plasma offers high viability, but poor microbial log reduction. Further study will aim at determining whether plasma treatment is effective at not only sanitization, but sterilization. This research was funded by a NASA grant at the Kennedy Space Center.

Plasma↗

The Effects of Plasma Application on Radish Seeds with Implications for Space Crop Production

In extended space missions, the astronaut diet will consist mostly of prepackaged foods. This could result in nutritional deficiencies due to the gradual breakdown of certain vitamins. To address this deficiency, fresh produce must be grown from seed during spaceflight. Stored seeds, however, can be vulnerable to microbial contamination which could jeopardize plant health and crop food safety. To alleviate this concern, the current practice is to sanitize seeds on the ground before spaceflight to the International Space Station (ISS). Methods of seed sanitization include alcohol soaking and chlorine gas fumigation, which have harmful effects on the environment and human health. Plasma application is a new sanitization approach that avoids these negative side effects while potentially elevating germination rate and improving growth rate; yet plasma application requires specific exposure time, power, and pressure to achieve these benefits. In the present study, Raphanus sativus ‘Cherry Belle’ radish seeds were exposed to either low pressure (Diener) plasma or atmospheric pressure plasma for varying increments of time (30s-1200s). Data collected includes immediate germination rate (viability) and microbial log reduction. Additionally, seeds were stored for later germination rate testing. Microbial assay controls have highlighted variability in initial microbial load between individual seeds, and further work is being performed to determine the standard microbial load of an untreated seed. In some samples, a negative log reduction was observed after plasma treatment encouraging further study to determine if the plasma is perforating the seed coat and releasing endophytic microbes. Treatment with Diener plasma shows promising microbial log reduction, but lower viability. In contrast, treatment with atmospheric pressure plasma offers high viability, but poor microbial log reduction. Further study will aim at determining whether plasma treatment is effective at not only sanitization, but sterilization. This research was funded by a NASA grant at the Kennedy Space Center.

Space Crop Production↗

Evaluation of Turner relaxed state as a model of long-lived ion-trapping structures in plasma focus and Z-pinches

Relatively long-lived spheroidal structures coincident with the neutron emission phase have been observed in frozen deuterium fiber Z-pinch and some plasma focus devices. Existence of energetic ion-trapping mechanism in plasma focus has also been inferred from experimental data. It has been conjectured that these are related phenomena. This paper applies Turner's theory [L. Turner, IEEE Trans. Plasma Sci. 14, 849 (1986)] of relaxation of a Hall magnetofluid to construct a model of these structures and ion-trapping mechanism. Turner's solution modified for a finite-length plasma is used to obtain expressions for the magnetic field, velocity, and equilibrium pressure fields and is shown to represent an entity which is simultaneously a fluid vortex, a force-free magnetic field, a confined finite-pressure plasma, a charged object, and a trapped energetic ion beam. Characteristic features expected from diagnostic experiments are evaluated and shown to resemble experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Drift kinetic effects on the plasma response in high beta spherical tokamak experiments

High $\beta$ plasma response to the rotating n=1 external magnetic perturbations is numerically studied and compared with National Spherical Torus eXperiment (NSTX). The hybrid magnetohydrodynamic(MHD)-kinetic modeling shows the drift kinetic effects are important to resolve the disagreement of plasma response between the ideal MHD prediction and the NSTX experimental observation when plasma pressure reaches and exceeds the no-wall limit [F. Troyon et al., Plasma Phys. Control. Fusion \textbf{26}, 209 (1984)]. Since the external rotating fields and high plasma rotation are presented in NSTX experiments, the importance of resistive wall effect and plasma rotation on determining the plasma response is also identified, where the resistive wall suppresses the plasma response through the wall eddy current. The inertial energy, due to plasma rotation, destabilizes the plasma. The complexity of plasma response, in this study, indicates that MHD modeling, including comprehensive physics e.g. the drift kinetic effects, resistive wall and plasma rotation, is essential to reliably predict the plasma behavior in high beta spherical tokamak device.

Tokamak↗

Gasdynamic modeling of the Venus magnetotail

A gasdynamic, convected magnetic field model of the solar wind interaction with Venus is used to model the steady state Venus magnetotail. The flow obstacle surface is approximated as a tangential discontinuity. An initial obstacle shape is defined by balancing a hydrostatic equilibrium approximation for the internal plasma pressure with an external flow pressure approximation. These approximations produce a cylindrical obstacle in the distant tail. A refined obstacle shape that attempts to balance this internal pressure with the calculated external flow pressure tapers inward toward the tail axis downstream of the terminator. The bulk plasma flow and magnetic field properties compare well with experimental observations. The model predicts central magnetotail oxygen plasma number densities of about 0.2/cu cm and temperatures on the order of 10 to the 6th K flowing tailward at speeds as low as 200 m/s.

Moore, K. R.↗

The FAST (FRC Acceleration Space Thruster) Experiment

The Field Reverse Configuration (FRC) is a magnetized plasmoid that has been developed for use in magnetic confinement fusion. Several of its properties suggest that it may also be useful as a thruster for in-space propulsion. The FRC is a compact toroid that has only poloidal field, and is characterized by a high plasma beta = (P)/(B (sup 2) /2Mu0), the ratio of plasma pressure to magnetic field pressure, so that it makes efficient use of magnetic field to confine a plasma. In an FRC thruster, plasmoids would be repetitively formed and accelerated to high velocity; velocities of = 250 km/s (Isp = 25,000s) have already been achieved in fusion experiments. The FRC is inductively formed and accelerated, and so is not subject to the problem of electrode erosion. As the plasmoid may be accelerated over an extended length, it can in principle be made very efficient. And the achievable jet powers should be scalable to the MW range. A 10 kW thruster experiment - FAST (FRC Acceleration Space Thruster) has just started at the Marshall Space Flight Center. The design of FAST and the status of construction and operation will be presented.

Martin, Adam↗

Pressure-driven stochastization of flux surfaces in stellarator equilibria: a review of the experimental observations and their analysis

Stellarator vacuum fields are designed to have a dense set of nested flux surfaces, with only small islands and stochastic regions in the interior of the confinement region. As the plasma pressure is increased, pressure driven currents appear, and they can significantly modify the vacuum field. The question arises whether pressure driven currents can cause significant flux surface breakage. Both the Wendelstein 7-AS and large helical device stellarators had dedicated experimental campaigns to study the β limit in those devices. In this paper, we review the evidence that the flux surfaces in a significant fraction of the plasma volume were stochastized by the pressure-driven currents in the highest β experiments. That phenomenon appears to have been the dominant source of pressure-driven flux surface loss in these experiments.

stellarator equilibrium↗

Simultaneous measurement of electron and heavy particle temperatures in He laser-induced plasma by Thomson and Rayleigh scattering

Thomson and Rayleigh scattering methods were applied to quantify the electron and heavy particle temperatures, as well as electron number density, in a laser spark in helium at atmospheric pressure. Plasma was created using 4.5 ns, 25 mJ pulses from Nd:YAG laser at 532 nm. Measurements, performed for the time interval between 20 ns and 800 ns after breakdown, show electron density and temperature to decrease from 7.8 Multiplication-Sign 10{sup 23} m{sup -3} to 2.6 Multiplication-Sign 10{sup 22} m{sup -3} and from 95 900 K to 10 350 K, respectively. At the same time, the heavy particle temperature drops from only 47 000 K down to 4100 K which indicates a two temperature plasma out of local isothermal equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gravitational steady states of solar coronal loops

Coronal loops on the surface of the sun appear to consist of curved, plasma-confining magnetic flux tubes or “ropes,” anchored at both ends in the photosphere. Toroidal loops carrying current are inherently unstable to expansion in the major radius due to toroidal-curvature-induced imbalances in the magnetic and plasma pressures. An ideal MHD analysis of a simple isolated loop with density and pressure higher than the surrounding corona, based on the theory of magnetically confined toroidal plasmas, shows that the radial force balance depends on the loop internal structure and varies over parameter space. It provides a unified picture of simple loop steady states in terms of the plasma beta β o , the inverse aspect ratio ϵ = a/R o , and the MHD gravitational parameter $\hat{G}$ ≡ ga/v$2\atop{A}$, all at the top of the loop, where g is the acceleration due to gravity, a the average minor radius, and v A the shear Alfvén velocity. In the high and low beta tokamak orderings, β o = 2n o T/(B$2\atop{0}$/2μ o ) ~ ϵ 1 and ϵ 2 , that fit many loops, the solar gravity can sustain nonaxisymmetric steady states at $\hat{G}$ ~ ϵβ o that represent the maximum stable height. At smaller \hat{G} ≤ ϵ 2 β o , the loop is axisymmetric to leading order and stabilized primarily by the two fixed loop ends. Very low beta, nearly force-free, steady states with β o ~ ϵ 3 may also exist, with or without gravity, depending on higher order effects. The thin coronal loops commonly observed in solar active regions have ϵ ≃ 0.02 and fit the high beta steady states. $\hat{G}$ increases with loop height. Fatter loops in active regions that form along magnetic neutral lines and may lead to solar flares and Coronal Mass Ejections have ϵ ≃ 0.1–0.2 and may fit the low beta ordering. Larger loops tend to have $\hat{G}$ > ϵβ o and be unstable to radial expansion because the exponential hydrostatic reduction in the density at the loop-top reduces the gravitational force -ρ$\hat{G}\hat{R}$ below the level that balances expansion, also in agreement with the observation that most sufficiently large loops grow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Joint DIII-D/EAST research on the development of a high poloidal beta scenario for the steady state missions of ITER and CFETR

Experimental and modeling investigations on the DIII-D and EAST tokamaks show the attractive transport and stability properties of fully noninductive, high poloidal-beta (β P ) plasmas, and their suitability for steady-state operating scenarios in ITER and CFETR. A key feature of the high-β P regime is the large-radius (r>0.6) internal transport barrier (ITB), often observed in all channels (ne, Te, Ti, rotation), and responsible for both excellent energy confinement quality and excellent stability properties. Experiments on DIII-D have shown that, with a largeradius ITB, very high β N and β P values (both≥4) can be reached by taking advantage of the stabilizing effect of a nearby conducting wall. Synergistically, higher plasma pressure provides turbulence suppression by Shafranov shift, leading to ITB sustainment independent of the plasma rotation. Experiments on EAST have been used to assess the long pulse potential of the high-β P regime. Using RF-only heating and current drive, EAST achieved minute-long fully noninductive steady state H-mode operation with strike points on an ITER-like tungsten divertor. Improved confinement (relative to standard H-mode) and steady state ITB features are observed with a monotonic q-profile with q min ~1.5. Separately, experiments have shown that increasing the density in plasmas driven by lower hybrid wave broadens the q-profile, a technique that could enable a large radius ITB. These experimental results have been used to validate MHD, current drive, and turbulent transport models, and to project the high-β P regime to a burning plasma. These projections suggest the Shafranov shift alone will not suffice to provide improved confinement (over standard H-mode) without rotation and rotation shear. However, increasing the negative magnetic shear (higher q on axis) provides a similar turbulence suppression mechanism to Shafranov shift, and can help devices such as ITER and CFETR achieve their steady-state fusion goals.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The updated ITPA global H-mode confinement database: description and analysis

The multi-machine ITPA Global H-mode Confinement Database has been upgraded with new data from JET with the ITER-like wall and ASDEX Upgrade with the full tungsten wall. This paper describes the new database and presents results of regression analysis to estimate the global energy confinement scaling in H-mode plasmas using a standard power law. Various subsets of the database are considered, focusing on type of wall and divertor materials, confinement regime (all H-modes, ELMy H or ELM-free) and ITER-like constraints. Apart from ordinary least squares, two other, robust regression techniques are applied, which take into account uncertainty on all variables. Regression on data from individual devices shows that, generally, the confinement dependence on density and the power degradation are weakest in the fully metallic devices. Using the multi-machine scalings, predictions are made of the confinement time in a standard ELMy H-mode scenario in ITER. The uncertainty on the scaling parameters is discussed with a view to practically useful error bars on the parameters and predictions. One of the derived scalings for ELMy H-modes on an ITER-like subset is studied in particular and compared to the IPB98(y,2) confinement scaling in engineering and dimensionless form. Transformation of this new scaling from engineering variables to dimensionless quantities is shown to result in large error bars on the dimensionless scaling. Regression analysis in the space of dimensionless variables is therefore proposed as an alternative, yielding acceptable estimates for the dimensionless scaling. The new scaling, which is dimensionally correct within the uncertainties, suggests that some dependencies of confinement in the multi- machine database can be reconciled with parameter scans in individual devices. This includes vanishingly small dependence of confinement on line-averaged density and normalized plasma pressure (β), as well as a noticeable, positive dependence on effective atomic mass and plasma triangularity. Extrapolation of this scaling to ITER yields a somewhat lower confinement time compared to the IPB98(y, 2) prediction, possibly related to the considerably weaker dependence on major radius in the new scaling (slightly above linear). Further studies are needed to compare more flexible regression models with the power law used here. In addition, data from more devices concerning possible ‘hidden variables’ could help to determine their influence on confinement, while adding data in sparsely populated areas of the parameter space may contribute to further disentangling some of the global confinement dependencies in tokamak plasmas.

Database↗

Structure and properties of Jupiter's magnetoplasmadisc

Voyager 1 plasma-wave observations have revealed the existence of an earthlike continuum radiation trapped in Jupiter's magnetospheric cavity at frequencies below the solar-wind plasma frequency. This radiation serves as an accurate diagnostic of the local electron number density throughout most of Jupiter's outer magnetosphere and yields information regarding the gross configuration of the magnetoplasmadisk as well as its kinematical properties. Magnetic-field observations are used to construct radial profiles of plasma pressure, density, and temperature from 20-80 Jupiter radii in the early-morning plasma sheet, along with plasma-sheet crossings and estimated thicknesses. The study suggests that hot protons (about 10 keV) are the dominant constituents of the plasma sheet (average thickness about 4.2 Jupiter radii) out to 80 Jupiter radii, beyond which centrifugal effects take over and distort the sheet toward the rotational equator.

Barbosa, D. D.↗

The effect of oxidation on the high heat flux behavior of a thermal barrier coating

The effect of oxidation on the high heat flux behavior of a thermal barrier coating was evaluated by cyclically exposing preoxidized specimens to a 3000 C nitrogen plasma. The thermal barrier coatings consisted of a 0.025 cm layer of air-plasma-sprayed ZrO2-7 percent Y2O3 and a 0.012 cm layer of low pressure-plasma-sprayed NiCoCrAlY applied over 0.13 cm diameter B1900+Hf cylindrical substrates. A gradient of 800 C is produced across the ceramic layer in each 0.5 second exposure. This is much more severe than the gradient encountered on a gas turbine engine. Prior to exposure, the specimens were preoxidized at 1200 C for time from 0 to 20 hours. These coatings were found to be tolerant to the high heat flux plasma flame for all but the most severe preoxidations. However, life degraded rapidly for preoxidation times in excess of 15 hours at 1200 C. A log-log plot of cycles-to-failure vs estimated oxidative weight gain yield a straight or nearly straight line, and this line could be rationalized using an oxidation-based model that was developed previously for low heat flux applications.

Miller, Robert A.↗

Frequency multiplication with toroidal mode number of kink/fishbone modes on a static HL-2A-like tokamak

In the presence of energetic particles (EPs), the long-lived mode (LLM) frequency multiplication with n = 1, 2, 3, or higher is often observed on HL-2A, where n is the toroidal mode number. Hybrid kinetic-MHD model simulations of the energetic particle (EP) driven kink/fishbone modes on a static HL-2A-like tokamak using NIMROD code find that when the background plasma pressure is relatively high, and the EP pressure and the beam energy are relatively low, the mode frequency increases almost linearly with EP pressure, and the frequency is proportional to n (‘frequency multiplication’), even in the absence of any equilibrium plasma rotation. In addition, the frequency multiplication persists as the safety factor at the magnetic axis q 0 varies. In the absence of EPs, the growth rate of the 1/1 mode is the largest; however, as the EP pressure increases, the growth rate of 2/2 modes or 3/3 modes becomes dominant, suggesting that higher-n modes are more vulnerable to EPs. These results may shed light on the understanding of the toroidal mode number dependence of kink/fishbone modes in the advanced scenarios of tokamaks with weak or reversed central magnetic shear.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Resistive wall mode stability and resonant field amplification in MAST high beta plasma

The n=1 (n is the toroidal mode number) resistive wall mode (RWM) instability and the resonant field amplification (RFA) due to a stable RWM response are numerically investigated for a MAST high-pressure plasma scenario, utilizing the MARS-F (Liu Y.Q. et al 2000 Phys. Plasmas 7 3681) and MARS-K (Liu Y.Q. et al 2008 Phys. Plasmas 15 112503) codes, for the purpose of understanding the potential RWM behavior in MAST-U plasmas. Ideal kink stability analysis identifies a target plasma, with parameters similar to that of the reference equilibrium reconstructed from a MAST high-pressure discharge, that accesses the RWM regime. The unstable n=1 RWM for the target equilibrium is subject to strong damping by the plasma toroidal flow and/or the drift kinetic effects from thermal particles. As a result, the mode is found to be stable under the experimental flow conditions, or even without flow stabilization if drift kinetic stabilization is included. The stability prediction is robust against variation of the assumed resistive wall minor radius. Active magneto-hydrodynamic (MHD) spectroscopy modeling, using the magnetic coils designed for controlling the edge localized modes (ELMs) in MAST-U as the antenna, shows strong resonant field amplification due to a stable RWM response in the target plasma. Maximal amplification, of 6-7 times larger than the applied vacuum field within the plasma, is obtained assuming a coil phasing of 120-180 degrees between the upper and lower rows of the ELM control coils. The MHD-kinetic hybrid model predicts generally higher RFA than the fluid model, in particular near the low-field and high-field sides of the plasma boundary surface. Furthermore, the MARS-F/K modeling thus shows that the RWM in MAST-U is subject to strong flow and kinetic stabilization, but can nevertheless be detected by active MHD spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasilinear modeling of heat flux from microtearing turbulence

Microtearing (MT) turbulence affects plasma confinement and profile evolution in many different magnetic-confinement scenarios, ranging from tokamak core plasmas to the H-mode pedestal and from spherical tokamaks to reversed-field pinches. Thus, an urgent need exists to design and test reduced models of MT turbulence and transport. Here, a heuristic quasilinear model is composed and verified by comparing its predictions against nonlinear MT simulations. It is found to yield good predictions of magnetic flutter transport as key parameters are varied: the collision frequency, the electron temperature gradient, and the normalized plasma pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parameter space for magnetization effects in high-energy-density plasmas

Magnetic fields are well known to affect the evolution of fluids via the J × B force, where J is the current density and B is the magnetic field. This force leads to the influence of magnetic fields on hydrodynamics (magnetohydrodynamics). Magnetic fields are often neglected in modeling of high-energy-density plasmas, since J × B is very small compared with the plasma pressure gradients. However, many experiments lie in a separate part of parameter space where the plasma is indirectly affected via magnetization of the heat flux and charged particle transport. This is true even for initially unmagnetized plasmas, since misaligned density and temperature gradients can self-generate magnetic fields. By comparing terms in the induction equation, we go on to estimate the regions of parameter space where these self-generated fields are strong enough to affect the hydrodynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗