Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA RESONANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

A new diagnostic of the plasma density profile near the edge transport barrier from measurements of the radial profile of the H{sub {alpha}} line intensity

An edge transport barrier is now one of the most important subjects of controlled fusion research. The edge transport barrier is located in the plasma region where hydrogen atoms readily penetrate, so the intensity of the H{sub {alpha}} (D{sub {alpha}}) line is high enough. A new diagnostic method uses the well-known property of hydrogen atoms that the ratio of the ionization rate S{sub i} to the excitation rate S{sub v} for the H{sub {alpha}} line is nearly constant over a wide range of plasma temperatures and densities. An expression has been derived that relates the radial profiles of the plasma density and H{sub {alpha}} intensity. The use of charge coupled device detectors makes it possible to measure the radial profile of H{sub {alpha}} line intensity with a resolution {approx}0.1 cm; a high intensity of the H{sub {alpha}} line ensures a high time resolution {approx}1 ms. A high resolution is thus achieved for the density profile calculated from the H{sub {alpha}} intensity profile. The method was tested when studying the plasma density profile in the region of edge transport barrier in the L-2M stellarator. It has been shown that the density gradient varies during the barrier formation and that a fine structure of the density profile correlates with a character of the plasma transport near resonance magnetic flux surfaces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Conceptual Study on New Isotope Analysis Technique with Resonance Ionization Mass Spectrometry Using Inductively Coupled Plasma as an Atomic Source (ICP-RIMS)

We have proposed the novel isotope analysis technique with Resonance Ionization Mass Spectrometry using Inductively Coupled Plasma as an atomic source (ICP-RIMS). Each component of ICP-RIMS is conceptually designed. We conclude that the orthogonal acceleration time-of-flight mass spectrometer (oa-TOF-MS) driven by a high-repetition-rate pulsed laser would be suitable system for ICP-RIMS. We, additionally, suggest that the first vacuum stage of the vacuum interface, which is between the sampling and skimmer cones, is desired to maintain as low pressure as possible in order to suppress the Doppler broadening and to skim the supersonic jet effectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First plasma processing trial of a quarter-wave resonator cryomodule at the Facility for Rare Isotope Beams

Studies of plasma processing for reduction of field emission in quarter-wave resonator (QWR) cryomodules are underway at the Facility for Rare Isotope Beams (FRIB), where a total of 104 QWRs are presently in operation. Driving the plasma with a higher-order mode allows for less mismatch at the fundamental power coupler and higher plasma density. The first plasma processing trial for FRIB QWRs in a cryomodule was conducted in January 2024. In-bunker cold tests of the cryomodule showed a significant reduction in field emission x-rays after plasma processing.

Glow & corona plasma discharges↗

Langmuir probe diagnostics of plasma in high current electron cyclotron resonance proton ion source

A high current Electron Cyclotron Resonance (ECR) proton ion source has been developed for low energy high intensity proton accelerator at Bhabha Atomic Research Centre. Langmuir probe diagnostics of the plasma generated in this proton ion source is performed using Langmuir probe. The diagnostics of plasma in the ion source is important as it determines beam parameters of the ion source, i.e., beam current, emittance, and available species. The plasma parameter measurement in the ion source is performed in continuously working and pulsed mode using hydrogen as plasma generation gas. The measurement is performed in the ECR zone for operating pressure and microwave power range of 10{sup −4}–10{sup −3} mbar and 400–1000 W. An automated Langmuir probe diagnostics unit with data acquisition system is developed to measure these parameters. The diagnostics studies indicate that the plasma density and plasma electron temperature measured are in the range 5.6 × 10{sup 10} cm{sup −3} to 3.8 × 10{sup 11} cm{sup −3} and 4–14 eV, respectively. Using this plasma, ion beam current of tens of mA is extracted. The variations of plasma parameters with microwave power, gas pressure, and radial location of the probe have been studied.

43 PARTICLE ACCELERATORS↗

Neutral resonant ionization in a H{sup −} plasma source: Potential of doubly excited **H{sup −}

Hydrogen plasmas are optically dense to Lyman-α radiation, maintaining *H(n = 2) neutral atoms that may undergo neutral resonant ionization to **H{sup −}. One state, **H{sup −}(2p{sup 2} {sup 3}P{sup e}), is thought bound at 9.7 meV with a several nanosecond lifetime while all others are unbound resonances. Collision dynamics of two *H(2s) shows that an ionic pair of (p, **H{sup −}) resolves at least three long-standing collision experiments. The doubly excited anion also has a path to the unexcited ion pair whose only physical distinction is that both (p, H{sup −}) have energy of 3.7 eV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nonlinear theory of resonant slow waves in anisotropic and dispersive plasmas

The solar corona is a typical example of a plasma with strongly anisotropic transport processes. The main dissipative mechanisms in the solar corona acting on slow magnetoacoustic waves are the anisotropic thermal conductivity and viscosity [Ballai et al., Phys. Plasmas 5, 252 (1998)] developed the nonlinear theory of driven slow resonant waves in such a regime. In the present paper the nonlinear behavior of driven magnetohydrodynamic waves in the slow dissipative layer in plasmas with strongly anisotropic viscosity and thermal conductivity is expanded by considering dispersive effects due to Hall currents. The nonlinear governing equation describing the dynamics of nonlinear resonant slow waves is supplemented by a term which describes nonlinear dispersion and is of the same order of magnitude as nonlinearity and dissipation. The connection formulas are found to be similar to their nondispersive counterparts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Further observations on resonance cones in non-Maxwellian plasmas

Results on the angular distribution of the electrostatic potential of a pulsating point charge in a warm magnetized plasma permeated by an electron beam are presented. The theoretical formulation for a finite magnetic field is given, and the solution of the resonance cone dispersion relation is presented. Numerical results on the angular distribution of the potential are shown, and the propagation of waves outside the resonance cones is described. It is demonstrated that with the inclusions of a finite magnetic field, the field patterns of a point charge are qualitatively similar to those obtained for a uniaxial plasma. The Cerenkov radiation occurs at angles much smaller than the cold-cone angle, even with the finite magnetic field. When the beam velocity is well above the thermal velocity of the background electrons, a characteristic wave propagation occurs between the cold-cone angles.

Thiemann, H.↗

Resistive wall mode stability and resonant field amplification in MAST high beta plasma

The n=1 (n is the toroidal mode number) resistive wall mode (RWM) instability and the resonant field amplification (RFA) due to a stable RWM response are numerically investigated for a MAST high-pressure plasma scenario, utilizing the MARS-F (Liu Y.Q. et al 2000 Phys. Plasmas 7 3681) and MARS-K (Liu Y.Q. et al 2008 Phys. Plasmas 15 112503) codes, for the purpose of understanding the potential RWM behavior in MAST-U plasmas. Ideal kink stability analysis identifies a target plasma, with parameters similar to that of the reference equilibrium reconstructed from a MAST high-pressure discharge, that accesses the RWM regime. The unstable n=1 RWM for the target equilibrium is subject to strong damping by the plasma toroidal flow and/or the drift kinetic effects from thermal particles. As a result, the mode is found to be stable under the experimental flow conditions, or even without flow stabilization if drift kinetic stabilization is included. The stability prediction is robust against variation of the assumed resistive wall minor radius. Active magneto-hydrodynamic (MHD) spectroscopy modeling, using the magnetic coils designed for controlling the edge localized modes (ELMs) in MAST-U as the antenna, shows strong resonant field amplification due to a stable RWM response in the target plasma. Maximal amplification, of 6-7 times larger than the applied vacuum field within the plasma, is obtained assuming a coil phasing of 120-180 degrees between the upper and lower rows of the ELM control coils. The MHD-kinetic hybrid model predicts generally higher RFA than the fluid model, in particular near the low-field and high-field sides of the plasma boundary surface. Furthermore, the MARS-F/K modeling thus shows that the RWM in MAST-U is subject to strong flow and kinetic stabilization, but can nevertheless be detected by active MHD spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The transport characteristics of passing fast ions produced by nonlocal overlapping of drift island surfaces and magnetic island surfaces

The structure of the drift-island surface of passing fast ions (PFIs) is investigated in the presence of the resonant interaction with a magnetic island. Two overlapping regions of the drift-island surface and the magnetic island surface are found, one corresponding to local overlapping region and the other to non-local one. Here, the word “nonlocal” denotes that the resonances in the core plasma can have effects on the PFIs near the plasma boundary, while the “local” represents that the PFIs just near the resonant location are influenced. The nonlocal overlapping constructs a transport path along which the PFIs can become losses. There are three kinds of drift-island surfaces to join in forming the transport paths. A pitch angle region, which is called pitch angle gap, is found near the plasma boundary, where the drift-island surface cannot be formed and few PFIs are lost. The pitch-angle selective features of PFI losses are obtained by analyzing the three kinds of drift-island surfaces. The coupling between the crowd drift island surfaces and the collision can induce the prompt losses of PFIs and rapidly slowing down of PFI energy. The time of the prompt losses and the slowing down rate are calculated. Qualitatively, the theoretical results are in well agreement with the experimental observations in ASDEX Upgrade [M. García-Muñoz et al., Nucl. Fusion 47, L10 (2007)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The three-dimensional modeling of plasma edge transport and divertor fluxes during application of resonant magnetic perturbations on ITER

Results from three-dimensional modeling of plasma edge transport and plasma–wall interactions during application of resonant magnetic perturbation (RMP) fields for control of edge-localized modes in the ITER standard 15 MA Q = 10 H-mode are presented. The full 3D plasma fluid and kinetic neutral transport code EMC3-EIRENE is used for the modeling. Four characteristic perturbed magnetic topologies are considered and discussed with reference to the axisymmetric case without RMP fields. Two perturbation field amplitudes at full and half of the ITER ELM control coil current capability using the vacuum approximation are compared to a case including a strongly screening plasma response. In addition, a vacuum field case at high q95 = 4.2 featuring increased magnetic shear has been modeled. Formation of a three-dimensional plasma boundary is seen for all four perturbed magnetic topologies. The resonant field amplitudes and the effective radial magnetic field at the separatrix define the shape and extension of the 3D plasma boundary. Opening of the magnetic field lines from inside the separatrix establishes scrape-off layer-like channels of direct parallel particle and heat flux towards the divertor yielding a reduction of the main plasma thermal and particle confinement. This impact on confinement is most accentuated at full RMP current and is strongly reduced when screened RMP fields are considered, as well as for the reduced coil current cases. The divertor fluxes are redirected into a three-dimensional pattern of helical magnetic footprints on the divertor target tiles. At maximum perturbation strength, these fingers stretch out as far as 60 cm across the divertor targets, yielding heat flux spreading and the reduction of peak heat fluxes by 30%. However, at the same time substantial and highly localized heat fluxes reach divertor areas well outside of the axisymmetric heat flux decay profile. Reduced RMP amplitudes due to screening or reduced RMP coil current yield a reduction of the width of the divertor flux spreading to about 20–25 cm and cause increased peak heat fluxes back to values similar to those in the axisymmetric case. The dependencies of these features on the divertor recycling regime and the perpendicular transport assumptions, as well as toroidal averaged effects mimicking rotation of the RMP field, are discussed in the paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental observation of left polarized wave absorption near electron cyclotron resonance frequency in helicon antenna produced plasma

Asymmetry in density peaks on either side of an m = +1 half helical antenna is observed both in terms of peak position and its magnitude with respect to magnetic field variation in a linear helicon plasma device [Barada et al., Rev. Sci. Instrum. 83, 063501 (2012)]. The plasma is produced by powering the m = +1 half helical antenna with a 2.5 kW, 13.56 MHz radio frequency source. During low magnetic field (B < 100 G) operation, plasma density peaks are observed at critical magnetic fields on either side of the antenna. However, the density peaks occurred at different critical magnetic fields on both sides of antenna. Depending upon the direction of the magnetic field, in the m = +1 propagation side, the main density peak has been observed around 30 G of magnetic field. On this side, the density peak around 5 G corresponding to electron cyclotron resonance (ECR) is not very pronounced, whereas in the m = -1 propagation side, very pronounced ECR peak has been observed around 5 G. Another prominent density peak around 12 G has also been observed in m = -1 side. However, no peak has been observed around 30 G on this m = -1 side. This asymmetry in the results on both sides is explained on the basis of polarization reversal of left hand polarized waves to right hand polarized waves and vice versa in a bounded plasma system. The density peaking phenomena are likely to be caused by obliquely propagating helicon waves at the resonance cone boundary.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Waves in Space Plasmas

Applications of linear mode conversion at Alfven/ion-ion hybrid resonances and at electron plasma frequency have been discussed. Alfven resonances play an important role on energy transport the outer to inner regions of magnetospheres. At Earth's magnetopause, the mode-converted kinetic Alfven waves also lead to solar wind particle entry and transverse ion heating. IIH resonant waves can explain of the generation of linearly polarized EMIC waves at Earth. Compressional waves can also interact with Mercury's magnetosphere exciting IIH resonances as global eigenmodes. Linear mode conversion (LMC) from Langmuir to electromagnetic waves is relevant to explain type II and III radio bursts. Through the LMC, both right- and left-hand polarized wave modes are produced and it provides the solutions for linear/partial polarized type II and III problems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

RMP Enhanced Transport and Rotation Screening in DIII-D Simulations

The application of resonant magnetic perturbations (RMP) to DIII-D plasmas at low collisionality has achieved ELM suppression, primarily due to a pedestal density reduction. The mechanism of the enhanced particle transport is investigated in 3D MHD simulations with the NIMROD code. The simulations apply realistic vacuum fields from the DIII-D I-coils, C-coils and measure intrinsic error fields to an EFIT reconstructed DIII-D equilibrium, and allow the plasma to respond to the applied fields while the fields are fixed at the boundary, which lies in the vacuum region. A non-rotating plasma amplifies the resonant components of the applied fields by factors of 2-5. The poloidal velocity forms E x B convection cells crossing the separatrix, which push particles into the vacuum region and reduce the pedestal density. Low toroidal rotation at the separatrix reduces the resonant field amplitudes, but does not strongly affect the particle pumpout. At higher separatrix rotation, the poloidal E x B velocity is reduced by half, while the enhanced particle transport is entirely eliminated. A high collisionality DIII-D equilibrium with an experimentally measured rotation profile serves as the starting point for a simulation with odd parity I-coil fields that can ultimately be compared with experimental results. All of the NIMROD results are compared with analytic error field theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Negative ion rich plasmas in continuous and pulsed wave modes in a minimum-B magnetic field

Generation of hydrogen negative ion rich plasmas is investigated in continuous wave (CW) and pulse modulated (PM) wave modes of 2.45 GHz in a minimum-B magnetic field. The waves are launched directly into the plasma device and utilize wave particle resonances for high density plasma generation. In CW operation, the chamber is divided into two sections, namely, the source and downstream region, separated by a transverse magnetic field that allows only cold electrons ({approx}1 eV) into the downstream region helpful for the generation of negative ions. The H{sup -} density is measured by the second derivative beat method and is compared with the values obtained from a steady state model and the extracted current density. In the pulsed mode, temporal filtering generates negative ion rich plasmas in the afterglow phase. The H{sup -} density in the afterglow is estimated using saturation current ratio method and the results are compared with a time dependent model using particle balance equations. The essential idea in both the filtering techniques is to assist generation of negative ions and prevent its destruction by hot electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A physical model of radiated enhancement of plasma-surrounded antenna

A phenomenon that the radiated power may be enhanced when an antenna is surrounded by a finite plasma shell has been found in numerical and experimental studies. In this paper, a physical model was built to express the mechanism of the radiated enhancement. In this model, the plasma shell is treated as a parallel connection of a capacitance and a conductance whose parameters change with the system parameters (plasma density, collision frequency, and antenna frequency). So, the radiated enhancement can be explained by the resonance between the plasma shell and the infinite free space. Furthermore, the effects of system parameters on the radiated power are given and effects corresponding to mechanisms are performed based on the physical model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Wave/particle interactions in the plasma sheet

The most frequent and intense waves observed in the geomagnetic tail region are short wavelength electrostatic broadband emissions. Early observations of these waves were made by using IMP 7 and 8 respectively. A broad frequency range for the waves was found, from about 10Hz to several kHz, with an average r.m.s. electric field amplitude of about 1mV/m was found. Other less frequent and less intense wave modes were also identified: magnetic noise bursts and electrostatic electron-cyclotron waves. The highest frequency of occurrence of the electrostatic noise as found in the region near the plasma sheet boundary when anisotropic fluxes of ions streaming either earthward or antiearthward were present. It was confirmed, by using ISEE data that the waves were usually observed during times of ion streaming and that the intensity and frequency range was maximum in the plasma sheet boundary layer and fell off dramatically in the tail lobe and central plasma sheet regions. It is suggested that increases in the electron and ion temperature in going from the tail lobe to the central plasma sheet are a result of scattering of resonant, boundary layer plasma.

Dusenberry, P. R.↗

Nonthermal effects on the resonant instability of the dust-acoustic wave in a semi-bounded Lorentzian dusty plasma

The nonthermal effects on the resonant instability of the surface dust-acoustic wave are investigated in a semi-bounded Lorentzian dusty plasma containing elongated rotating dust grains. It is found that the nonthermal effects reduce the frequency domain and enhance the growth rate of the resonant instability for the case of positively charged dust grains. For negatively charged dust grains, however, the nonthermal effects on the frequency domain and the growth rate are found to be negligible. It is also found that the growth rates of the resonant instabilities in nonthermal plasmas would be greater than those in thermal plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A biresonant plasma source based on a gapped linear microwave vibrator

The operating principle of a novel microwave plasma source-a linear microwave vibrator with a gap-is discussed. The source is placed on a microwave-transparent window of a chamber filled with a plasma-forming gas (argon or methane). The device operation is based on the combination of two resonances-geometric and plasma ones. The results of experimental tests of the source are presented. For a microwave frequency of 2.45 GHz, microwave power of {<=}1 kW, and plasma-forming gas pressure in the range 5 Multiplication-Sign 10{sup -2}-10{sup -1} Torr, the source is capable of filling the reactor volume with a plasma having an electron density of about 10{sup 12} cm{sup -3} and electron temperature of a few electronvolts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗