Search NASA⌕ Search

SEARCH · Search NASA

Results for “Parameter optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Improving Cycling Performance of Anode-Free Lithium Batteries by Pressure and Voltage Control

The anode-free lithium (Li) batteries (AFLBs) have great potential to provide higher energy density than most other batteries. However, the performance of AFLBs is very sensitive to pressure and other operating parameters, especially for coin cells widely used in AFLB investigations. Therefore, optimizing cell assembly parameters and test protocol is critical to get reliable and comparable results in this field. In this work, the operating voltage range of AFLBs using a localized high concentration electrolyte has been optimized. The morphology of the deposited Li in AFLBs is much more indicting to the pressure than other type of batteries due to the absence of anode active material (i.e. Li) as a pressure cushion layer in the as prepared cells. With an optimized cycling protocol, a thin layer of uniform nucleation sites can be formed in the initial cycle which will facilitate smooth Li desposition/stripping in the subsequent cycles of AFLBs. The solid electrolyte interphase layer formed under optimized pressure and uniform pressure distribution exhibits a good mechanical stability even after long-term cycling. In conclusion, with an optimized cell configuration, the internal pressure in the coin cells has been optimized to improve the cycling performance of AFLBs (Cu||NMC811) with 72% of capacity retention in 100 cycles.

25 ENERGY STORAGE↗
DOE OSTI2022

Learning Optimal Aerodynamic Designs

This project created a framework for efficient, accurate, and scalable deep neural network representations of design optimization problem solutions. The inputs to these DNN representations are the vector of design requirement parameters, the outputs are the optimal design variables, and the goal is to learn the map from inputs to outputs (i.e., inverse design). The team addressed the problem of the optimal shape design of aerodynamic lifting surfaces—in particular aircraft wings—using a Reynolds-Average Navier Stokes model to govern the CFD-based aerodynamic shape optimization. The inverse design map for such problems is very complex and high-dimensional, involving inputs and outputs on the order of 1000s. To approximate this inverse design map, the team developed algorithms to construct parsimonious DNN architectures, which automatically identify low-dimensional manifolds in which design requirements affect optimal shape parameters, and trained these architectures with multifidelity optimization methods. The resulting methodology accurately and automatically designs optimal aerodynamic lifting surfaces with very high accuracy (99%) at interactive speeds, of the order of milliseconds, resulting in factors of one million or more speedup relative to CFD-based design optimization.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

GOOML Big Kahuna Forecast Modeling and Genetic Optimization Files

This submission includes example files associated with the Geothermal Operational Optimization using Machine Learning (GOOML) Big Kahuna fictional power plant, which uses synthetic data to model a fictional power plant. A forecast was produced using the GOOML data model framework and fictional input data, and a genetic optimization is included which determines optimal flash plant parameters. The inputs and outputs associated with the forecast and genetic optimization are included. The input and output files consist of data, configuration files, and plots. A link to the Physics-Guided Neural Networks (phygnn) GitHub repository is also included, which augments a traditional neural network loss function with a generic loss term that can be used to guide the neural network to learn physical or theoretical constraints. phygnn is used by the GOOML framework to help integrate its machine learning models into the relevant physics and engineering applications. Note that the data included in this submission are intended to provide a demonstration of GOOML's capabilities. Additional files that have not been released to the public are needed for users to run these models and reproduce these results. Units can be found in the readme data resource.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Efficient QAOA Optimization using Directed Restarts and Graph Lookup

Variational Quantum Algorithms (VQA) aim to enhance the capabilities of Noisy Intermediate-Scale Quantum (NISQ) devices. These algorithms utilize parameterized circuits and classical optimizers to iteratively execute circuits with varying parameters. However, VQA faces computational overheads due to repeated iterations and random restarts. Prior work suggests using basic sub-graphs to transfer parameters for the input graph, reducing optimizer overheads but limiting applicability to structured regular graphs. In real-world applications, random irregular graphs are common, and existing methods are not scalable or practical for such graphs. This paper presents a framework that aims to improve random irregular graphs in VQA. The framework uses graph similarity and important features like total edge counts, average edge counts, and variance. It follows an iterative process to choose basis sub-graphs from a small database and adjust parameters accordingly. Classical optimizers then utilize these parameters to determine when to restart and perform gradient descent. This approach increases the chances of reaching global maximum points.

Wang, Meng↗
DOE OSTI2023

Automated control and optimization of laser-driven ion acceleration

The interaction of relativistically intense lasers with opaque targets represents a highly non-linear, multi-dimensional parameter space. This limits the utility of sequential 1D scanning of experimental parameters for the optimization of secondary radiation, although to-date this has been the accepted methodology due to low data acquisition rates. High repetition-rate (HRR) lasers augmented by machine learning present a valuable opportunity for efficient source optimization. Here, an automated, HRR-compatible system produced high-fidelity parameter scans, revealing the influence of laser intensity on target pre-heating and proton generation. A closed-loop Bayesian optimization of maximum proton energy, through control of the laser wavefront and target position, produced proton beams with equivalent maximum energy to manually optimized laser pulses but using only 60% of the laser energy. This demonstration of automated optimization of laser-driven proton beams is a crucial step towards deeper physical insight and the construction of future radiation sources.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Topology optimization of an airfoil fin microchannel heat exchanger using artificial intelligence

High-performance microchannel heat exchangers are needed to supply heat for power conversion for nuclear microreactors. An airfoil fin microchannel design, constructed of Alloy 617 with helium as the working fluid, is analyzed and optimized using a design of experiments with artificial intelligence techniques. The use of airfoil fins offers the potential to reduce pressure drop across the heat exchanger, as compared to other types of channel configurations. A framework for topology optimization of airfoil fin printed circuit heat exchangers (PCHEs) has been developed that can be readily extended to different fin sizes and shapes, as well as different inlet and operating conditions, materials of construction, and working fluids. An optimization procedure is developed that employs computational fluid dynamics for a set of design points identified using Latin hypercube sampling. Computational fluid dynamics is used to analyze a simplified two-channel configuration where five design parameters are varied – inlet angle, fin scale, extent of staggering, transverse and longitudinal pitches. Two methods (a 5D polynomial and a regression neural network) are compared for generating surrogate models and the resulting response surface approximation is input to a genetic algorithm that is used to identify a set of optimal parameters. The optimal geometries are found across six channel Reynolds numbers ranging from 1000 to 5000, since inlet conditions affect flow through the heat exchanger. Additionally, a set of optimal designs that maximizes heat transfer and minimizes pressure drop is identified, and a thermal stress analysis is performed on the optimal design. Correlations for the Nusselt number and Darcy friction factor are developed that can be useful for thermal hydraulic analyses using system codes. Thermal stresses are analyzed and a brief discussion of the status of code cases of PCHEs for nuclear applications is given. Testing and thermomechanical modeling is needed to facilitate future code compliance of PCHEs for high pressure and high temperature applications.

42 ENGINEERING↗
DOE OSTI2025

Deep inference of simulated strong lenses in ground-based surveys

The large number of strong lenses discoverable in future astronomical surveys will likely enhance the value of strong gravitational lensing as a cosmic probe of dark energy and dark matter. However, leveraging the increased statistical power of such large samples will require further development of automated lens modeling techniques. We show that deep learning and simulation-based inference (SBI) methods produce informative and reliable estimates of parameter posteriors for strong lensing systems in ground-based surveys. We present the examination and comparison of two approaches to lens parameter estimation for strong galaxy-galaxy lenses — Neural Posterior Estimation (NPE) and Bayesian Neural Networks (BNNs). We perform inference on 1-, 5-, and 12-parameter lens models for ground-based imaging data that mimics the Dark Energy Survey (DES). We find that NPE outperforms BNNs, producing posterior distributions that are more accurate, precise, and well-calibrated for most parameters. For the 12-parameter NPE model, the calibration is consistently within <10% of optimal calibration for all parameters, while the BNN is rarely within 20% of optimal calibration for any of the parameters. Similarly, residuals for most of the parameters are smaller (by up to an order of magnitude) with the NPE model than the BNN model. This work takes important steps in the systematic comparison of methods for different levels of model complexity.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Integration and Optimization of a Waste Heat Driven Organic Rankine Cycle for Power Generation in Wastewater Treatment Plants

The study focuses on achieving energy self-sufficiency in Wastewater Treatment Plants by proposing a comprehensive model for integrating, sizing, and optimizing an Organic Rankine Cycle system. The Organic Rankine Cycle system is designed to utilize waste heat from the gensets at As Samra Wastewater Treatment Plant in Jordan, where it will contribute to the overall electrical energy supply of the plant. Real data from As Samra Wastewater Treatment Plant is used to model and calculate the available waste heat using TRNSYS® software. The Organic Rankine Cycle model is then developed using ASPEN PLUS® software to explore the impact of operational parameters and determine their optimal values for maximizing the plant's energy profile. An economic analysis is conducted to assess the feasibility of the proposed model, considering system components, installation, operation, and maintenance costs. To optimize the Organic Rankine Cycle system, the study employs the Multi-Output Support Vector Regression technique to capture nonlinear relationships between independent variables (fluid type, turbine inlet pressure, turbine inlet temperature, turbine outlet pressure, and mass flow rate) and dependent variables (pump power input, waste heat input, and turbine specific work). The Osprey optimization algorithm is used to address the multi-objective optimization problem, with the proposed Pareto-based Osprey Optimization Algorithm and the Multi-Objective Particle Swarm Optimization technique being employed to evaluate critical performance and economic parameters such as system thermal efficiency, net power output, and the levelized cost of electricity. The results of the optimization strategies indicate that the M-SVR model's prediction accuracy is significantly improved after parameter optimization, with the model returning high R 2 and low Mean Square Error values of 0.991 and 0.00216, respectively. The Pareto-Based Osprey Optimization Algorithm optimizer identifies the best working fluid as Isobutane/Isopentane in a ratio of 66:34, with optimal turbine inlet pressure and temperature of 15 bars and 218 °C, respectively. In conclusion, the Organic Rankine Cycle model at these optimal conditions achieves a cycle efficiency of 19.93% and an Levelized Cost of Electricity value of 0.0353 USD/kWh.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Stochastic Framework for Optimal Control of Planetary Reentry Trajectories Under Multilevel Uncertainties

We present a novel stochastic optimal control framework that accounts for various types of uncertainties, with application to reentry trajectory planning. The formulation of the optimal trajectory control problem is presented in the context of an indirect method where a functional objective associated with the terminal vehicle speed is to be minimized. Uncertain input parameters in the optimal trajectory control model, including aerodynamic parameters and initial and terminal conditions, are modeled as aleatory random variables, while the statistical parameters of these aleatory distributions are themselves random variables. The parametric and model uncertainties are simultaneously propagated through an extended polynomial chaos expansion (EPCE) formalism. Several metrics are described to evaluate response statistics and presented as insightful tools for robust decision making. Specifically, the response probability density function (PDF) reflecting influence of both epistemic and aleatory uncertainties is obtained. By sampling over the random variables representing model error, an ensemble of response PDFs is generated and the associated failure probability is estimated as a random variable with its own polynomial chaos expansion. Besides, the sensitivity index functions of response PDF with respect to the statistical parameters are evaluated. Coupling parametric and model uncertainties within the EPCE framework leads to a robust and efficient paradigm for multilevel uncertainty propagation and PDF characterization in general optimal control problems.

Engineering↗
DOE OSTI2021

Autotuning PolyBench benchmarks with LLVM Clang/Polly loop optimization pragmas using Bayesian optimization

Here, we develop a ytopt autotuning framework that leverages Bayesian optimization to explore the parameter space search and compare four different supervised learning methods within Bayesian optimization and evaluate their effectiveness. We select six of the most complex PolyBench benchmarks and apply the newly developed LLVM Clang/Polly loop optimization pragmas to the benchmarks to optimize them. We then use the autotuning framework to optimize the pragma parameters to improve their performance. The experimental results show that our autotuning approach outperforms the other compiling methods to provide the smallest execution time for the benchmarks syr2k, 3mm, heat-3d, lu, and covariance with two large datasets in 200 code evaluations for effectively searching the parameter spaces with up to 170,368 different configurations. We find that the Floyd-Warshall benchmark did not benefit from autotuning. To cope with this issue, we provide some compiler option solutions to improve the performance. Then we present loop autotuning without a user's knowledge using a simple mctree autotuning framework to further improve the performance of the Floyd-Warshall benchmark. We also extend the ytopt autotuning framework to tune a deep learning application.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Inverse design for waveguide dispersion with a differentiable mode solver

Inverse design of optical components based on adjoint sensitivity analysis has the potential to address the most challenging photonic engineering problems. However, existing inverse design tools based on finite-difference-time-domain (FDTD) models are poorly suited for optimizing waveguide modes for adiabatic transformation or perturbative coupling, which lies at the heart of many important photonic devices. Among these, dispersion engineering of optical waveguides is especially challenging in ultrafast and nonlinear optical applications involving broad optical bandwidths and frequency-dependent anisotropic dielectric material response. In this work, we develop gradient back-propagation through a general-purpose electromagnetic eigenmode solver and use it to demonstrate waveguide dispersion optimization for second harmonic generation with maximized phase-matching bandwidth. This optimization of three design parameters converges in eight steps, reducing the computational cost of optimization by ∼100x compared to exhaustive search and identifying new designs for broadband optical frequency doubling of laser sources in the 1.3–1.4 µm wavelength range. Furthermore, we demonstrate that the computational cost of gradient back-propagation is independent of the number of parameters, as required for optimization of complex geometries. This technique enables practical inverse design for a broad range of previously intractable photonic devices.

Gray, Dodd (ORCID:000000030469599X)↗
DOE OSTI2022

Neutronic design and fuel cycle analysis of a fluoride salt-cooled High Temperature Reactor (FHR)

The Fluoride salt-cooled High temperature Reactor (FHR) is a new Gen IV reactor concept that can operate under near atmospheric pressure circumstances and further enhance the inherent safety. In this study, an FHR core design with 165 megawatts of thermal output (MWth) is proposed. The reactor core employs tri-structural-isotropic (TRISO) particle fuel within prismatic graphite blocks as the basic fuel form, FLiBe (2 {sup 7}LiF-BeF{sub 2}) as the primary coolant, and a three-batch fuel cycle scheme. Sensitivity analyses on various parameters were performed to optimize the cycle length and neutronic parameters. The fuel cycle of this core design was evaluated in detail from 4 aspects: cycle length, power peaking factor (PPF), discharge burnup, and temperature coefficient. It was found that larger fuel channel pitch (FCP) would have a relatively harder neutron spectrum, and yield relatively longer cycle length, lower, better fuel temperature coefficient (FTC), and moderator temperature coefficient (MTC). In addition, burnable poison (BP), Er{sub 2}O{sub 3}, can effectively reduce PPF, hold down the multiplication factor, and more importantly it can improve the MTC. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Design of High Efficient Mid-Wavelength Infrared Polarizer on ORMOCHALC Polymer

While an organically modified chalcogenide (ORMOCHALC) can be used to fabricate a polymeric mid-wavelength infrared (MWIR) polarizer with competitive extinction ratio compared to the commercial wire-grid polarizers, which are composed of fragile inorganic materials, there is still a knowledge gap regarding the systematic design process to obtain high transmission efficiency and extinction ratio. As such, a computational parameter study for design optimization is conducted with the geometric parameters of the bilayer grating ORMOCHALC polarizer. The computational study shows that the Fabry–Pérot cavity is the primary mechanism that determines the transmission behaviors and the extinction ratio. A bilayer grating design, guided by the parameter study, is realized through the thermal nanoimprint and metal deposition processes. The extinction ratios measured with the Fourier-transform infrared are 245, 304, and 351 at the wavelength of 3, 4, and 5 μm, respectively. Compared to the state-of-the-art of the polymeric MWIR linear polarizers, the extinction ratio is improved by 1.4 times, and the transmission efficiency is increased by 2.5 times. Theoretical analysis with the multiple-layer model based on the transfer matrix method predicts a matched transmission behavior with the experiment and a full-wave electromagnetic simulation.

42 ENGINEERING↗
DOE OSTI2022

Optimization of the deep neural network parameters for generating homogenized fuel assembly data for nodal codes

Homogenized fuel assembly (FA) data is a typical input data for nodal codes. Generating that data, however, could be time-consuming. One of promising ways to mitigate the computational burden of generating macroscopic cross-sections is to use trained artificial neural network (ANN) models for predicting nuclear data. However, there is a challenge to make the model support variable FA geometry. In this work, two most common types of FA were combined in one ANN model. Since there could be multiple ways of converting 2-dimensional FA data into 1-dimensional input vector for ANN, three different approaches of data flattening were evaluated. The input parameters included each fuel pin enrichment, fuel temperature, moderator temperature and boron concentration. The output parameters were 2-group macroscopic cross-sections (XS) and pin power distribution (HFF). A fully connected deep neural network (DNN) model was trained and tested using pre-generated data obtained with lattice physics code STREAM. The results of this study showed no statistically significant difference in the accuracy of XS and HFF generation for all 3 tested input vector orders. This means that fully connected DNN for XS generation demonstrated input sequence invariance. Results of comparing predicted XS data with reference solutions were found sufficiently close considering the reduction of computation time offered by ANN. Mean relative difference (MRD) for all output XS parameters was found below 0.7%, while HFF MRD was found higher compared to XS values, in some cases slightly exceeding 1%, mostly near guide tube locations. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Deployable Wind-Hybrid Power Systems for Defense and Disaster Response Applications

This report presents an analysis of the performance of deployable energy systems comprised of wind energy systems integrated with diesel generators, photovoltaic systems, and battery storage to meet the load requirements of a representative U.S. Army forward operating base. The analysis is conducted using HOMER, a microgrid analysis software that can search through a wide range of parameters to design and optimize microgrid power systems. The search parameters include the system architecture, the wind and solar resources, and the availability of diesel fuel. The results of the analysis measure the relative performance of the different systems and environments in terms of the overall transportation cost to deploy the system and the ability to provide resilience in terms of meeting mission critical loads.

02 PETROLEUM↗