Search NASA⌕ Search

SEARCH · Search NASA

Results for “Process Selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Cost-Benefit Analysis For Alternative Low-Emission Surface Preparation/ Depainting Technologies for Structural Steel

Stennis Space Center (SSC), Kennedy Space Center (KSC) and Air Force Space Command (AFSPC) identified particulate emissions and waste generated from the depainting process of steel structures as hazardous materials to be eliminated or reduced. A Potential Alternatives Report, Potential Alternatives Report for Validation of Alternative Low Emission Surface Preparation/Depainting Technologies for Structural Steel, provided a technical analyses of identified alternatives to the current coating removal processes, criteria used to select alternatives for further analysis, and a list of those alternatives recommended for testing. The initial coating removal alternatives list was compiled using literature searches and stakeholder recommendations. The involved project participants initially considered approximately 13 alternatives. In late 2003, core project members selected the following depainting processes to be further evaluated: (1) Plastic Blast Media-Quickstrip(R)-A. (2) Hard Abrasive-Steel-Magic(R). (3) Sponge Blasting-Sponge-Jet(R). (4) Liquid Nitrogen-NItroJet(R). (5) Mechanical Removal with Vacuum Attachment-DESCO and OCM Clean-Air (6) Laser Coating Removal Alternatives were tested in accordance with the Joint Test Protocol for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel, and the Field Evaluation Test Plan for Validation of Alternative Low-Emission Surface Preparation/Depainting Technologies for Structural Steel. Results of the testing are documented in the Joint Test Report. This Cost-Benefit Analysis (CBA) focuses on the three alternatives (Quickstrip(R)-A, SteelMagic (R), and Sponge-Jet(R)) that were considered viable alternatives for large area operations based on the results of the field demonstration and lab testing. This CBA was created to help participants determine if implementation of the candidate alternatives is economically justified. Each of the alternatives examined reduced Environmental Activity (EA) Costs-those costs associated with complying with environmental regulations. One alternative, Steel-Magic(R), also showed reduced Direct Costs and reduced total costs.

Lewis, Pattie↗
NASA NTRS2006

Automated Assignment of Proposals to Reviewers

A computer program automates the process of selecting unbiased peer reviewers of research proposals submitted to NASA. Heretofore, such selection has been performed by manual searching of two large databases subject to a set of assignment rules. One database lists proposals and proposers; the other database lists potential reviewers. The manual search takes an average of several weeks per proposal. In contrast, the present software can perform the selection in seconds. The program begins by selecting one entry from each database, then applying the assignment rules to this pair of entries. If and only if all the assignment rules are satisfied, the chosen reviewer is assigned to the chosen proposal. The assignment rules enforced by the program are (1) a maximum allowable number of proposals assigned to a single reviewer; (2) a maximum allowable number of reviewers assigned to a single proposal; (3) if the proposing team includes a member affiliated with an industry, then the reviewer must not be affiliated with any industry; and (4) the reviewer must not be a member of the proposing team or affiliated with the same institution as that of a member of the proposing team.

Kantak, Anil↗
NASA NTRS2012

Plans for a Next Generation Space-Based Gravitational-Wave Observatory (NGO)

The European Space Agency (ESA) is currently in the process of selecting a mission for the Cosmic Visions Program. A space-based gravitational wave observatory in the low-frequency band (0.0001 - 1 Hz) of the gravitational wave spectrum is one of the leading contenders. This low frequency band has a rich spectrum of astrophysical sources, and the LISA concept has been the key mission to cover this science for over twenty years. Tight budgets have recently forced ESA to consider a reformulation of the LISA mission concept that wi" allow the Cosmic Visions Program to proceed on schedule either with the US as a minority participant, or independently of the US altogether. We report on the status of these reformulation efforts.

Livas, Jeffrey C.↗
NASA NTRS2014

Dielectric Performance of a High Purity HTCC Alumina at High Temperatures - a Comparison Study with Other Polycrystalline Alumina

A very high purity (99.99+%) high temperature co-fired ceramic (HTCC) alumina has recently become commercially available. The raw material of this HTCC alumina is very different from conventional HTCC alumina, and more importantly there is no glass additive in this alumina material for co-firing processing. Previously, selected HTCC and LTCC (low temperature co-fired ceramic) alumina materials were evaluated at high temperatures as dielectric and compared to a regularly sintered 96% polycrystalline alumina (96% Al2O3), where 96% alumina was used as the benchmark. A prototype packaging system based on regular 96% alumina with Au thickfilm metallization successfully facilitated long term testing of high temperature silicon carbide (SiC) electronic devices for over 10,000 hours at 500 C. In order to evaluate this new high purity HTCC alumina for possible high temperature packaging applications, the dielectric properties of this HTCC alumina substrate were measured and compared with those of 96% alumina and a previously tested LTCC alumina from room temperature to 550 C at frequencies of 120 Hz, 1 KHz, 10 KHz, 100 KHz, and 1 MHz. A parallel-plate capacitive device with dielectric of the HTCC alumina and precious metal electrodes were used for measurements of the dielectric constant and dielectric loss of the co-fired alumina material in the temperature and frequency ranges. The capacitance and AC parallel conductance of the capacitive device were directly measured by an AC impedance meter, and the dielectric constant and parallel AC conductivity of the dielectric were calculated from the capacitance and conductance measurement results. The temperature and frequency dependent dielectric constant, AC conductivity, and dissipation factor of the HTCC alumina substrate are presented and compared to those of 96% alumina and a selected LTCC alumina. Other technical advantages of this new co-fired material for possible high packaging applications are also discussed.

Electronic packaging↗
NASA NTRS2014

Driving an Active Vibration Balancer to Minimize Vibrations at the Fundamental and Harmonic Frequencies

Vibrations of a principal machine are reduced at the fundamental and harmonic frequencies by driving the drive motor of an active balancer with balancing signals at the fundamental and selected harmonics. Vibrations are sensed to provide a signal representing the mechanical vibrations. A balancing signal generator for the fundamental and for each selected harmonic processes the sensed vibration signal with adaptive filter algorithms of adaptive filters for each frequency to generate a balancing signal for each frequency. Reference inputs for each frequency are applied to the adaptive filter algorithms of each balancing signal generator at the frequency assigned to the generator. The harmonic balancing signals for all of the frequencies are summed and applied to drive the drive motor. The harmonic balancing signals drive the drive motor with a drive voltage component in opposition to the vibration at each frequency.

Holliday, Ezekiel S.↗
NASA NTRS2012

Terrain Safety Assessment in Support of the Mars Science Laboratory Mission

In August 2012, the Mars Science Laboratory (MSL) mission will pioneer the next generation of robotic Entry, Descent, and Landing (EDL) systems by delivering the largest and most capable rover to date to the surface of Mars. The process to select the MSL landing site took over five years and began with over 50 initial candidate sites from which four finalist sites were chosen. The four finalist sites were examined in detail to assess overall science merit, EDL safety, and rover traversability on the surface. Ultimately, the engineering assessments demonstrated a high level of safety and robustness at all four finalist sites and differences in the assessment across those sites were small enough that neither EDL safety nor rover traversability considerations could significantly discriminate among the final four sites. Thus the MSL landing site at Gale Crater was selected from among the four finalists primarily on the basis of science considerations.

Kipp, Devin↗
NASA NTRS2018

Electrical Engineering Medium Voltage Protection and Coordination

This presentation covers the basics of the medium voltage electrical system on the Kennedy Space Center. The material will include the process of selective coordination between protective devices and the analysis of a fault that occurred in the electrical system. I will discuss the most common causes of faults found and how the system reacts to the faults at different locations in the subsystem. Explain the importance of the sensitivity and coordination between the devices to protect the equipment it is supplying.

Wessner, Jason R.↗
NASA NTRS2014

Demonstration of Prognostics-Enabled Decision Making Algorithms on a Hardware Mobile Robot Test Platform

Prognostics-enabled Decision Making (PDM) is an emerging research area that aims to integrate prognostic health information and knowledge about the future operating conditions into the process of selecting subsequent actions for the system. Previous work developing and testing PDM algorithms has been done in simulation; this paper describes the effort leading to a successful demonstration of PDM algorithms on a hardware mobile robot platform. The hardware platform, based on the K11 planetary rover prototype, was modified to allow injection of selected fault modes related to the rover’s electrical power subsystem. The PDM algorithms were adapted to the hardware platform, including development of a software module framework, a new route planner, and modifications to increase the algorithms’ robustness to sensor noise and system timing issues. A set of test scenarios was chosen to demonstrate the algorithms’ capabilities. The modifications to run with a hardware platform, the test scenarios, and the test results are described in detail. The results show a successful use of PDM algorithms on a hardware test platform to optimize mission planning in the presence of electrical system faults.

Prognosis↗
NASA NTRS2016

Conceive, Believe and Achieve; A Path to Miniaturization, COTS Infusion, and Size Weight and Power Realization for Flight

JPL along with other aerospace agencies such as the US Air Force Space Pro-grams and a packaging technology innovator, i3 Electronics, Inc., are evaluating the use of state-of-the-art (SOA) commercial off-the-shelf (COTS) and alternative packaging technologies for future high performance and high reliability space applications. Utilization of SOA COTS technologies have resulted in large scale reduction in electronics volume, weight, power, cost and schedule with outstanding electrical performance and high reliability. We will share JPL’s joint design, architectural approach, alternative substrate materials selection, associated processes, and mission assurance role in identifying reliability and qualification risks, as part of the three year Heterogeneous Packaging/Device Integration effort under the guidance and leadership of JPL’s Mission Assurance Directorate.

Hunter, Don J.↗
NASA NTRSDate not supplied

Sensitivity of the ACCP Value Framework Science Benefit Score

NASA’s priorities for Earth Science are informed by the 2017-2027 Decadal Survey for Earth Science and Applications from Space of the National Academies of Sciences, Engineering and Medicine. In that document, five Designated Observables are identified as priorities for implementation: Aerosols, Cloud-Convection-Precipitation, Surface Biology, Mass Change, and Surface Deformation Change. In 2019, NASA initiated four multi-year studies to formulate, assess, and recommend potential Observing System concepts that are responsive to the recommendations of the Earth Science Decadal Survey. The Aerosols, Clouds, Convection, and Precipitation (ACCP) study investigates opportunities for synergistic science resulting from implementations that combine both Aerosols science objectives and Clouds, Convection, and Precipitation science objectives. For the ACCP study, a Value Framework was designed to introduce structure, transparency, and traceability in the mission down-select decision process. This paper presents a sensitivity analysis that was conducted to characterize the behavior of the science benefit score of the ACCP Value Framework. it includes derivations of the sensitivity analysis equations, numerical analyses of the behavior of the combined benefit score, and the conclusions drawn from the results of the work that was conducted. The results of this analysis were key to ensuring that the aggregated science benefit scores would enable the team to differentiate and contrast across concepts.

John McLaughlan↗
NASA NTRSDate not supplied

Understanding Solar Energetic Particles With STEREO HET

The project evaluates solar energetic particles (SEPs) in the Heliosphere utilizing in situ data from the STEREO mission. More specifically, raw data from the High Energy Telescope (HET) corresponding to the abundances and energy spectra of electrons, protons, He, and heavier nuclei was extracted. C codes were modified and written to analyze Pulse heights and fluxes in a readable format. Plots of the data were formulated in Python. Low fluxes of heavier elements prompted a revaluation of the onboard binning process. New selection criteria will be generated to orient the particle energy loss in the detectors with the expected locations of the energy tracks corresponding to each element.

Energetic Particles↗
NASA NTRSDate not supplied

Metal Additive Manufacturing for Spaceflight

Metal additive manufacturing (AM) is changing how complex aerospace parts are being designed and manufactured for rocket engines and launch vehicles. NASA has been leading AM efforts since the late 2000’s to mature specialty alloys for AM, advance AM processes, develop standards and infuse AM into rocket engines and the commercial supply chain. There are many types of AM processes and alloys in-use and this presentation will provide an overview of how NASA is applying these for rocket engines and the potential opportunities for AM in the future.

Additive Manufacturing↗
NASA NTRSDate not supplied

Out-of-plane behavior of selectively stitched curved beams subjected to four-point bending

Through-the-thickness stitching can be used to provide a pathway to reduce interlaminar damage in laminated polymer composites. To decrease the amount of stitching, a selective stitching process is necessary to reduce the total manufacturing time in stitched polymer composites. In this study, L-shaped laminates are stitched in the radius section to arrest out-of-plane damage that can occur when subjected to four-point bending loads. A cohesive zone finite element model of the L-shaped laminate was developed. An embedded spring element approach was used to represent the through-the-thickness reinforcements within the finite element model. Specimens with stitches in the radius region of the L-shaped laminate were found to have greater maximum loads before failure. The through-the-thickness stitches are observed to locally reduce the radial stresses in the radius region of the L-shaped laminate, which results in delamination growth away from the radius centerline and greater load-carrying capability.

Stitched Composites↗
DOE OSTI2025

A Joint Search for the Electromagnetic Counterpart to the Gravitational-Wave Binary Black-Hole Merger Candidate S250328ae with the Dark Energy Camera and the Prime Focus Spectrograph

The first detection of an optical counterpart to a gravitational wave signal revealed that collaborative efforts between instruments with different specializations provide a unique opportunity to acquire impactful multi-messenger data. We present results of such a joint search with the Dark Energy Camera (DECam) and Prime Focus Spectrograph (PFS) for the optical counterpart of the LIGO-Virgo-KAGRA event S250328ae, a binary black hole merger candidate of high significance detected at a distance of 511$\pm$82 Mpc and localized within an area of 3 (15) square degrees at 50% (90%) confidence. We observed the 90% confidence area with DECam and identified 36 high-confidence transient candidates after image processing, candidate selection, and candidate vetting. We observed with PFS to obtain optical spectra of DECam candidates, Swift-XRT candidates, and potential host galaxies of S250328ae. In total, 3897 targets were observed by seven pointings covering ~50% of the 90% confidence area. After template fitting and visual inspection, we identified 12 SNe, 159 QSOs, 2975 galaxies, and 131 stars. With the joint observations of DECam and PFS, we found variability in 12 SNe, 139 QSOs, 37 galaxies, and 2 stars. We do not identify any confident optical counterparts, though the association is not ruled out for three variable candidates that are not observed by PFS and 6 QSO candidates without clear variability if the optical counterpart of S250328ae is faint. Despite the lack of confident optical counterparts, this paper serves as a framework for future collaborations between wide-field imagers and multi-object spectrographs to maximize multi-messenger analyses.

Zhang, Haibin [Natl. Astron. Observ. of Japan] (OR↗