Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Shaped Beam KU-Band Antenna Design

Antenna systems for a Ku-band synchronous orbit communications satellite were considered. A multiple beam offset feed cluster used in conjunction with an offset parabolic reflector was chosen for the antenna realization. For radiating elements in the feed array, polyrod or dielectric rod radiators fed by waveguide are investigated. Polyrod antennas shrink the cross section of the waveguide required, are fairly directive, and can be tapered to reduce sidelobes. As a consequence, it is thought that mutual coupling effects between adjacent elements will be minimal and the resultant physically small elements will allow greater packing densities for the drive elements in the feed array than would otherwise be possible.

Dudgeon, J. E.↗
NASA NTRS1971

Development of advanced high strength tantalum base alloys. Part 1: Screening investigation

Five experimental tantalum alloy compositions containing 13-18% W+Re+Hf solid solution solute additions with dispersed phase strengthening achieved by carbon or nitrogen additions were prepared as 1.4 inch diameter ingot processed to 3/8 inch diameter rod and evaluated. Elevated temperature tensile and creep strength increased monotonically with increasing solute content. Room temperature elongation decreased for 20% to less than 2% as the solute content was increased above 16%. Phase identification indicated that the precipitating phase in the carbide containing alloys was Ta2C.

Buckman, R. W., Jr.↗
NASA NTRS1973

Development of lightweight aluminum compression panels reinforced by boron-epoxy infiltrated extrusions

Analytical and experimental studies were performed to evaluate the structural efficiencies afforded by the selective reinforcement of conventional aluminum compression panels with unidirectional boron epoxy composite materials. A unique approach for selective reinforcement was utilized called boron/epoxy infiltration. This technique uses extruded metal sections with preformed hollow voids into which unidirectional boron filaments are drawn and subsequently infiltrated with resin to form an integral part. Simplified analytical models were developed to investigate the behavior of stiffener webs with reinforced flanges. Theoretical results are presented demonstrating the effects of transverse shear, of the reinforcement, flange eccentricity and torsional stiffness in such construction. A series of 55 tests were conducted on boron-infiltrated rods and extruded structural sections.

Roy, P. A.↗
NASA NTRS1972

Apollo couch energy absorbers

Load attenuators for the Apollo spacecraft crew couch and its potential applications are described. Energy absorption is achieved through friction and cyclic deformation of material. In one concept, energy absorption is accomplished by rolling a compressed ring of metal between two surfaces. In another concept, energy is absorbed by forcing a plastically deformed washer along a rod. Among the design problems that had to be solved were material selection, fatigue life, ring slippage, lubrication, and friction loading.

Wesselski, C. J.↗
NASA NTRS1972

Particle shape and magnetization of chondrite meteorites, lunar samples, and impactites

Extra terrestrial materials, certain materials which have their origin at the earth's surface due to meteoritic impact, or under highly reducing conditions, such as in the case of basaltic flows in contact with coal beds or serpentenites, all contain Fe and FeNi phases with high magnetization values and spherical shape. Normally, the demagnetizing field (H sub D = NI sub S: where N is the demagnetizing factor and I is the saturation magnetization) is corrected for. In disperse systems, such as most natural materials, the particle shape effects are analyzed in terms of the saturation fields, Hs = H sub D = NI sub S and the magnetization differences (Delta I sub S). Discrete size modes of superparamagnetic (SP), multidomain (MD), and single domain (SD) particles result in reduced coercive force (Hc), increase in the value R sub H (ratio of remanent coercive force, H sub R, to H sub C), and decrease in the value R sub I (ratio of remanent magnetization, I sub R, to saturation magnetization, T sub S). The main distinctions between the various natural materials can be made by this approach. Hysteresis loops for terrestrial basalts, Fe and Ni rods and spheres, chondrite meteorites, lunar samples, impactites, and chondritic fusion crust are presented.

Wasilewski, P.↗
NASA NTRS1973

Composition effects on mechanical properties of tungsten-rhenium-hafnium-carbon alloys

The mechanical properties of rod and sheet fabricated from arc melted W-4Re-Hf-C alloys containing up to about 0.8 mol percent hafnium carbide (HfC) were evaluated in the as-worked condition. The DBTT's of electropolished bend and tensile specimens were independent of HfC content in this range but dependent on excess Hf or C above that required for stoichiometric HfC. Low temperature ductility was a maximum at Hf contents slightly in excess of stoichiometric. Variations in high temperature strength were also dependent on excess Hf and C. Maximum creep strengthening also occurred at Hf contents in excess of stoichiometric. Analysis of extracted second phase particles indicated that creep strength was reduced by increasing WC content in the HfC particles.

Witzke, W. R.↗
NASA NTRS1972

Cytological studies of lunar treated tissue cultures

An electron microscopic study was made of botanical materials, particularly pine tissues, treated with lunar materials collected by Apollo 12 quarantine mission. Results show unusual structural changes within several of the treated tissues. The bodies, as yet unidentified, resemble virus particles observed within infected plant cells. Although the size and shape of the structures are comparable to rod shaped virus particles such as Tobacco mosaic, the numerical distribution, affinity for stains, and intercellular location are different.

Halliwell, R. S.↗
NASA NTRS1973

Undergraduate research report

Studies are reported of the probability distribution of yield strength for mild steel, and the application of numerical techniques to solve mechanical vibration problems. Tensile experiments were conducted for 50 cold rolled and 38 hot rolled mild steel rods. Chi-square, Kolmogro-Smirnov and goodness-of-fit methods are used to test the normality or lognormality of the experimental results. As an example of the application of numerical techniques, a nonlinear dash-pot-speing system subjected to seismic excitation is analyzed by using the fourth-order Runge-Kutta integrated method.

Yeh, H. Y.↗
NASA NTRS1972

Kinetic theory of a two-dimensional magnetized plasma. II - Balescu-Lenard limit.

The kinetic theory of a two-dimensional one-species plasma in a uniform dc magnetic field is investigated in the small plasma parameter limit. The plasma consists of charged rods interacting through the logarithmic Coulomb potential. Vahala and Montgomery earlier (1971) derived a Fokker-Planck equation for this system, but it contained a divergent integral, which had to be cut off on physical grounds. This cutoff is compared to the standard cutoff introduced in the two-dimensional unmagnetized Fokker-Planck equation. In the small plasma parameter limit, it is shown that the Balescu-Lenard collision term is zero in the long time average limit if only two-body interactions are considered. The energy transfer from a test particle to an equilibrium plasma is discussed and is also shown to be zero in the long time average limit. This supports the unexpected result of zero Balescu-Lenard collision term.

Vahala, G.↗
NASA NTRS1973

Ultrasonic measurement of elastic moduli in slender specimens using extensional and torsional wave pulses.

The pulse-echo method using extensional and torsional waves is described relative to determining elastic properties and other characteristics of specimens which are slender acoustically. Several applications are reviewed, including: glass fibers of diameter 16 to 42 microns; glass rods of diameter about 1 mm, tested to 700 C; iron-base alloys of diameter 3.2 mm, tested from nearly -200 up to +200 C; titanium specimens of rectangular cross section, 1.5 by 3 mm; and tantalum-base alloys of diameter 6.4 mm, tested up to 1400 C. Limitations are pointed out regarding dispersive materials and geometry.

Lynnworth, L. C.↗
NASA NTRS1973

A neutral-atmosphere composition experiment for the Atmosphere Explorer-C, -D, and -E.

The neutral-atmosphere composition experiment instrumentation is designed to obtain in-situ measurements of neutral thermosphere composition from Atmosphere Explorer-C, -D, and -E. The system is based on previously flown OGO-6 and San Marco-3 composition instruments. The mass-spectrometer sensor includes a gold-plated thermalizing chamber and ion source, a hyperbolic rod quadrupole analyzer, and an off-axis electron multiplier. Automatic ion-source sensitivity control and pulse-counting techniques provide density measurement capability from approximately 125 to 1000 km altitude. The normal operating mode includes measurement at all masses in the range of 1 to 44 amu, with emphasis on hydrogen, helium, oxygen, nitrogen, and argon.

Pelz, D. T.↗
NASA NTRS1975

Remotely operated gas-pressure regulator and shuttle valve

Valve features precise gas-pressure regulation and shuts off flow by remote control. Valve is made up of regulator valve cavity and spring-compression adjusts cavity. Elements in regulator cavity are conventional and include high-pressure inlet, ball which mates with seat, push rod, and pressure-sensing diaphragm.

Koch, E. F.↗
NASA NTRS1973

Structural analysis of light aircraft using NASTRAN

An application of NASTRAN to the structural analysis of light aircraft was conducted to determine the cost effectiveness. A model of the Baby Ace D model homebuilt aircraft was used. The NASTRAN model of the aircraft consists of 193 grid points connected by 352 structural members. All members are either rod or beam elements, including bending of unsymmetrical cross sections and torsion of noncircular cross sections. The aerodynamic loads applied to the aircraft were in accordance with FAA regulations governing the utility category aircraft.

Wilkinson, M. T.↗
NASA NTRS1973

Atmospheric electricity

Atmospheric electricity must be considered in the design, transportation, and operation of aerospace vehicles. The effect of the atmosphere as an insulator and conductor of high voltage electricity, at various atmospheric pressures, must also be considered. The vehicle can be protected as follows: (1) By insuring that all metallic sections are connected by electrical bonding so that the current flow from a lightning stroke is conducted over the skin without any gaps where sparking would occur or current would be carried inside; (2) by protecting buildings and other structures on the ground with a system of lightning rods and wires over the outside to carry the lightning stroke into the ground; (3) by providing a zone of protection for launch complexes; (4) by providing protection devices in critical circuits; (5) by using systems which have no single failure mode; and (6) by appropriate shielding of units sensitive to electromagnetic radiation.

Daniels, G. E.↗
NASA NTRS1974

Endurance testing of downstream cathodes on a low-power MPD thruster

A low-power MPD thruster with downstream cathode was tested for endurance with a series of hollow cathode designs. Failure modes and failure mechanisms were identified. A new hollow cathode (with rod inserts) has emerged which shows promise for long life. The downstream positioning of the cathode was also changed from an on-axis location to an off-axis location. Data are presented for a 1332-hour life test of this new hollow cathode located at the new off-axis location. Xenon propellant was used.

Burkhart, J. A.↗
NASA NTRS1974

Study of structure defect interactions in aluminum by the acoustic method

Using echo pulse and resonance rod methods, internal friction in pure aluminum was studied as a function of frequency, hardening temperature, time (internal friction relaxation) and impurity content. These studies led to the conclusion that internal friction in these materials depends strongly on dislocation structure and on elastic interactions between structure defects. It was found experimentally that internal friction relaxation depends on the cooling rate and on the impurity content. Some parameters of the dislocation structure and of the diffusion process were determined. It is shown that the dislocated dependence of internal friction can be used as a method of nondestructive testing of the impurity content of high-purity materials.

Nicolaescu, I. I.↗
NASA NTRS1974

Bibliography on aircraft fire hazards and safety. Volume 1: Hazards. Part 1: Key numbers 1 to 817

Ignition temperatures of n-hexane, n-octane, n-decane, JP-6 jet fuel, and aircraft engine oil MIL-7-7808 (0-60-18) were determined in air using heated Pyrex cylinders and Nichrome wires, rods, or tubes. Ignition temperature varied little with fuel-air ratio, but increased as the size of the heat source was decreased. Expressions are given which define the variation of the hot surface ignition temperatures of these combustibles with the radius and the surface area of the heat source. The expressions are applicable to stagnant or low velocity flow conditions (less than 0.2 in./sec.). In addition, the hot gas ignition temperatures of the combustible vapor-air mixtures were determined with jets of hot air. These ignition temperatures also varied little with fuel-air ratio and increased as the diameter of the heat sources was decreased.

Pelouch, J. J., Jr.↗
NASA NTRS1974

Heat flow calorimeter

Heat flow calorimeter devices are used to measure heat liberated from or absorbed by an object. This device is capable of measuring the thermal output of sealed nickel-cadmium batteries or cells during charge-discharge cycles. An elongated metal heat conducting rod is coupled between the calorimeter vessel and a heat sink, thus providing the only heat exchange path from the calorimeter vessel itself.

Fletcher, J. C.↗