Search NASA⌕ Search

SEARCH · Search NASA

Results for “Science activities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Review of Calculations on Point Defect Properties in Delta-Pu

The results of theoretical predictions of properties for vacancies and self-interstitial atoms (SIA) in δ-Pu are presented and reviewed. Three methods have been used for these predictions, namely the modified embedded atom method (MEAM), density functional theory (DFT) with and without spin polarization, and continuum mechanics (CM) models adapted to plutonium. The properties considered are formation and migration energies, and relaxation volumes of vacancies and SIA. Predicted values vary considerably. Nevertheless, all three methods predict that the activation energy for self-diffusion by vacancies is of similar magnitude as the SIA formation energy. Furthermore, the absolute magnitudes of relaxation volumes for vacancies and SIA are also similar, indicating that there exist no large bias for radiation-induced void swelling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Non-isothermal Reduction Kinetics of Iron During Vacuum Carbothermal Reduction of Ilmenite Concentrate

The non-isothermal reduction kinetics and mechanism of iron during vacuum carbothermal reduction of ilmenite concentrate were investigated by X-ray diffraction, backscattered electron imaging, and energy-dispersive X-ray spectroscopy at temperatures from 1273 K to 1673 K (1000 °C to 1400 °C). The pressure dropped and the increasing trend of mass loss and metallization ratios slowed down when the temperature was higher than 1573 K (1300 °C). The reaction products were iron, Ti{sub 2}O{sub 3}, and silicate. Iron was mainly obtained by carbothermal reduction of FeTiO{sub 3} and FeTi{sub 2}O{sub 5}. The irons continued to nucleate, aggregate, and grow during the reduction process. Comprehensive consideration of Šatava–Šesták method and Coats–Redfern method, the apparent activation energy of the reduction process was 587.4 ± 2.98 kJ/mol, and the forms of both integral and differential for the mechanism function were G(a)= [(1−a){sup −1/3}−1]{sup 2} and f(a) = 3/2(1−a){sup 4/3}[(1−a)−{sup 1/3}−1]{sup −1}, respectively.

36 MATERIALS SCIENCE↗

Activation energy and carriers dynamics of multilayer CdTe/ZnTe quantum dots with different ZnTe separation layer thicknesses

We studied the optical properties of multilayer CdTe/ZnTe quantum dots (QDs) with various ZnTe separation layer thicknesses on GaAs substrates. The low temperature photoluminescence (PL) spectra show that the excitonic peaks in multilayer CdTe/ZnTe QDs shift to higher energy levels, and PL peak intensities increase with increasing ZnTe separation layer thickness. This is because of increasing uncoupling and because there are many more carriers confined in the QDs with wider separation layers. Temperature-dependent PL measurements showed that the activation energies of the confined electrons in the multilayer CdTe/ZnTe QDs decreases with decreasing ZnTe separation layer thickness. The time-resolved PL spectra show increasing carrier decay times with decreasing ZnTe separation layer thickness, due to increasing coupling between QDs with narrower separation layers.

36 MATERIALS SCIENCE↗

Chronic arsenic increases cell migration in BEAS-2B cells by increasing cell speed, cell persistence, and cell protrusion length

Highlights: • Chronic arsenic exposure primes lung epithelial cells for enhanced cell migration. • Chronic arsenic increases cell motility in an EGFR-dependent manner. • Chronic arsenic increases cell persistence in an EGFR-independent manner. • EGFR is sufficient, but not necessary for increasing cell protrusion length in chronic arsenic treated cells. There is a strong association between arsenic exposure and lung cancer development, however, the mechanism by which arsenic exposure leads to carcinogenesis is not clear. In our previous study, we observed that when BEAS-2B cells are chronically exposed to arsenic, there is an increase in secreted TGFα, as well as an increase in EGFR expression and activity. Further, these changes were broadly accompanied with an increase in cell migration. The overarching goal of this study was to acquire finer resolution of the arsenic-dependent changes in cell migration, as well as to understand the role of increased EGFR expression and activity levels in the underlying mechanisms of cell migration. To do this, we used a combination of biochemical and single cell assays, and observed chronic arsenic treatment enhancing cell migration by increasing cell speed, cell persistence and cell protrusion length. All three parameters were further increased by the addition of TGFα, indicating EGFR activity is sufficient to enhance those aspects of cell migration. In contrast, EGFR activity was necessary for the increase in cell speed, as it was reversed with an EGFR inhibitor, AG1478, but was not necessary to enhance persistence and protrusion length. From these data, we were able to isolate both EGFR-dependent and –independent features of cell migration that were enhanced by chronic arsenic exposure.

60 APPLIED LIFE SCIENCES↗

Development of activated carbon derived from banana peel for CO{sub 2} removal

This research work highlights on the constraints involved in the preparation of the banana peel bio-sorbent, such as impregnation ratio, activation temperature and period of activation for reducing carbon dioxide (CO{sub 2}) in the atmosphere. Micromeritics ASAP 2020 and Field Emission Scanning Electron Microscope (FESEM) were used in identifying the best sample preparation method with the largest surface area which directly contributes to the effectiveness of adsorbent in removing CO{sub 2}. Sample A10 was identified to yield activated carbon with the largest surface area (260.3841 m{sup 2}/g), total pore volume (0.01638 cm{sup 3}/g) and pore diameter (0.2508 nm). Through nitrogen adsorption-desorption isotherm analysis, the existence of sub-micropores was proven when a combination of Type-I and Type-II isotherms were exhibited by the activated carbon produced. The results from the final adsorption test found that the material synthesized from the above mentioned parameter is capable of removing up to 1.65% wt of CO{sub 2} through adsorption at 25°C, suggesting that it can be effectively used as an adsorption material.

36 MATERIALS SCIENCE↗

Characteristic properties of macroporous silicon sintering in an argon atmosphere

The temperature and time dependences of the sintering of macroporous silicon in Ar or Ar + 3% H{sub 2} are studied. The contribution of various mechanisms governing this process is determined. The specific features of the sintering of macroporous silicon are examined by means of isochronous and isothermal annealing of the samples with ordered and random macropores in the temperature range 1000–1225°C. It is found that the sintering of macroporous silicon under atmospheric pressure in an inert gas flow containing 2 × 10–4% O{sub 2} is greatly affected by thermal etching. Thermal etching competes with the substance-transfer processes characteristic of sintering and hinders the formation of a defect-free surface crust. The reason for etching consists in that gaseous silicon monoxide is generated and then carried away by the gas flow. The etching effect is dominant in the low-temperature range and is independent of whether H{sub 2} is added. The values obtained for the activation energy of the silicon diffusion coefficient, E{sub a} = 2.57 eV, and for the exponent n = 3.31–3.74 in the time dependence of the pore radius, r ~ t{sup 1/n} are indicative of a mixed substance-transfer mechanism via the surface and volume diffusion of silicon atoms.

36 MATERIALS SCIENCE↗

Phase transitions, structure and ion conductivity of zirconium hydrogen phosphates, H{sub 1{+-}X}Zr{sub 2-X}M{sub X}(PO{sub 4}){sub 3}.H{sub 2}O (M = Nb, Y)

Structure transformations and proton conductivity of hydrogen zirconium phosphates with the NASICON structure, H{sub 1{+-}X}Zr{sub 2-X}M{sub X}(PO{sub 4}){sub 3}.H{sub 2}O (X = 0, 0.02 and 0.1, M = Nb, Y), were studied by X-ray powder diffraction, calorimetry, IR- and impedance spectroscopy. Substitution of zirconium by niobium leads to decrease of the lattice parameters, while yttrium doping leads to their increase. H{sub 0.9}Zr{sub 1.9}Nb{sub 0.1}(PO{sub 4}){sub 3} structure was determined at 493 and 733 K. This phase crystallizes in rhombohedral space group R3-bar c with lattice parameters a = 8.8564(5) A, c = 22.700(1) A at 493 K and a = 8.8470(2) A, c = 22.7141(9) A at 733 K. The a parameter and lattice volume were found to decrease with temperature increasing. Structure transformations upon heating are caused mainly by the decrease of the M1 site and C cavities. Ion conductivity of obtained materials was found to increase in humid atmosphere. Activation energies of conductivity were calculated. Rhombohedral-triclinic phase transition found by X-ray powder diffraction was proved by calorimetry data. According to XRD and IR spectroscopy data hydrogen bond in HZr{sub 2}(PO{sub 4}){sub 3} was found to be weaker than in hydrated material.

36 MATERIALS SCIENCE↗

Bioinspired Design of Dissipative Self-Assembly of Active Materials (Final Technical Report)

The major objective of this DOE-funded research program was to establish general, experimentally validated design principles for dissipative, out-of-equilibrium self-assembly of synthetic active materials. In living systems, structures such as actin filaments and microtubules are maintained far from thermodynamic equilibrium through continuous energy consumption. This persistent nonequilibrium operation enables functions including adaptability, self-healing, directed motion, and force generation—properties that are largely absent in traditional equilibrium soft materials.

36 MATERIALS SCIENCE↗

Kinetics of Reduction of Low-Grade Nickel Laterite Ore Using Carbon Monoxide

Reduction of a low-grade nickel laterite ore with carbon monoxide to produce Fe-Ni alloy was investigated using a thermo-gravimetric analysis (TGA) method. Non-isothermal reduction tests with a fixed heating rate of 10 °C/min from room temperature to 1200 °C were carried out to determine the different reduction stages and reaction products in each state. Combining measured mass losses with theoretically calculated values together with X-ray diffraction analysis, the products of different reduction stages were identified and a reaction path was established. Isothermal reduction tests with temperatures ranging from 500 °C to 1100 °C were performed to evaluate the temperature dependence of the reduction kinetics. Various kinetic models were fitted to the experimental data to further determine the rate-controlling step in the isothermal tests. Then, two groups of TG experiments were carried out to study the effect of CO flow rate and sample mass on the rate of reaction. The results indicated that the reduction rate increases with the increase of the reduction temperature from 500 °C to 1100 °C. More alloy products are formed and the apparent activation energies increase from 8.6 to 14.7 kJ/mol with the increase of the reduction temperature from 700 °C to 1100 °C. Accordingly, it was proposed that diffusion of CO in the gas bulk and through the pores of the laterite ore sample bed are the rate limiting steps.

36 MATERIALS SCIENCE↗

Effect of Dynamic Strain Aging on Tensile Deformation of 20MnMoNi55 Alloy

Results obtained from the uniaxial tensile tests of 20MnMoNi55 low-alloy RPV steel at different temperatures (varying from 27 to 450 °C) and straining rates (varying from 10{sup −5} to 10{sup −1} s{sup −1}) reveal that the material response is sensitive to both temperature and strain rate. For the range of temperature varying from 200 to 400 °C, in combination with different strain rates, the material shows negative strain rate sensitivity along with different kinds of serrated flow (between 200 and 310 °C), commonly termed as Portevin–Le Chatelier effect (types A, B and C). The material behavior, in that temperature–strain rate window, is described by dynamic strain aging (DSA) effect, and the changes in the mechanical properties of the material are studied. The DSA attribute of 20MnMoNi55 steel is characterized by calculating the activation energy. The x-ray diffraction technique and atomic percentage analysis using energy-dispersive x-ray suggest that the manganese influences the interstitial (carbon and/or nitrogen) diffusion by forming Mn-C and/or Mn-N pair, which can be a plausible cause of DSA in the material.

36 MATERIALS SCIENCE↗

Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}: A novel blue emitting phosphor for white LEDs

Graphical abstract: Under the 350 nm radiation excitation, Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band. When the temperature turned up to 150 °C, the emission intensity of Ba{sub 1.97}B{sub 2}O{sub 5}:0.03Ce{sup 3+} is 63.4% of the initial value at room temperature. The activation energy ΔE is calculated to be 0.25 eV, which prove the good thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. All the properties indicate that Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} may have potential application in white LEDs. - Highlights: • Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band under the 350 nm radiation excitation. • Emission intensity of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} is 63.4% (150 °C) of the initial value (30 °C). • The activation energy ΔE for thermal quenching is 0.25 eV. - Abstract: A novel blue emitting phosphor Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} is synthesized by a high temperature solid state method. The luminescent property and the thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} are investigated. Under the 350 nm radiation excitation, Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band, and the peak locates at 417 nm which is assigned to the 5d{sup 1}–4f{sup 1} transition of Ce{sup 3+}. It is further proved that the dipole–dipole interaction results in the concentration quenching of Ce{sup 3+} in Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. When the temperature turned up to 150 °C, the emission intensity of Ba{sub 1.97}B{sub 2}O{sub 5}:0.03Ce{sup 3+} is 63.4% of the initial value at room temperature. The activation energy ΔE is calculated to be 0.25 eV, which prove the good thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. All the properties indicate that Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} may have potential application in white LEDs.

36 MATERIALS SCIENCE↗

A comprehensive first-principles study of the effects of the exchange-correlation functional and magnetism on defect and diffusion properties of the CoCrNi medium-entropy alloy

The present work is a novel, systematic study of the effect of density functional theory input parameters on the vacancy formation energy (VFE), migration barrier for diffusion, and electronic structure for each element in the CoCrNi medium-entropy alloy (MEA). In particular, the novelties include: (1) calculating the aforementioned properties of Co, Cr, or Ni, in the CoCrNi MEA using magnetic and non-magnetic states, and two versions of the generalized gradient approximation: Perdew, Burke, and Ernzerhof (PBE) and the PBE version for solids (PBEsol), and (2) a detailed comparison of 0 K activation energy to experimental creep activation energies. First-principles calculations at 0 K are performed using the Vienna ab-initio simulation package. Special quasirandom structures (SQS) and Widom-type substitution are employed. For each element, Co, Cr, or Ni, non-magnetic calculations result in a higher VFE and larger range of calculated values for the configurations studied. The averaged migration barrier is the highest for Co in the CoCrNi for three of four sets of calculation parameters in the configurations studied. Finally, the results indicate that the average 0 K activation energy for diffusion makes up 70–80% of the experimental creep activation energy, depending on the exchange-correlation functional employed.

36 MATERIALS SCIENCE↗

Local detection of activation energy for ionic transport in lithium cobalt oxide

Local activation energy for ionic diffusion is probed on the nanometer level in LiCoO{sub 2} thin films using variable temperature electrochemical strain microscopy (ESM). The high spatial resolution of ESM allows one to extract information about ionic activation energies on the level of individual grains and grain facets, thus bridging the lengths scales of atomistic calculations and traditional macroscopic experiments. A series of control experiments have been performed and possible signal generating mechanisms are discussed to explain the temperature-dependent ESM measurements.

36 MATERIALS SCIENCE↗

Hydrogen incorporation induced metal-semiconductor transition in ZnO:H thin films sputtered at room temperature

The room temperature deposited ZnO:H thin films having high conductivity of 500 Ohm-Sign {sup -1} cm{sup -1} and carrier concentration reaching 1.23 Multiplication-Sign 10{sup 20} cm{sup -3} were reactively sputter deposited on glass substrates in the presence of O{sub 2} and 5% H{sub 2} in Ar. A metal-semiconductor transition at 165 K is induced by the increasing hydrogen incorporation in the films. Hydrogen forms shallow donor complex with activation energy of {approx}10-20 meV at oxygen vacancies (V{sub O}) leading to increase in carrier concentration. Hydrogen also passivates V{sub O} and V{sub Zn} causing {approx}4 times enhancement of mobility to 25.4 cm{sup 2}/V s. These films have potential for use in transparent flexible electronics.

36 MATERIALS SCIENCE↗

Water transport and clustering behavior in homopolymer and graft copolymer polylactide

Polylactide is a bio-based and biodegradable polymer well-known for its renewable origins. Water sorption and clustering behavior in both a homopolymer polylactide and a graft copolymer of polylactide was studied using the quartz crystal microbalance/heat conduction calorimetry (QCM/HCC) technique. The graft copolymer, poly(1,5-cyclooctadiene-co-5-norbornene-2-methanol-graft-D,L-lactide), contained polylactide chains (95 wt.%) grafted onto a hydrophobic rubbery backbone (5 wt.%). Clustering is an important phenomenon in the study of water transport properties in polymers since the presence of water clusters can affect the water diffusivity. The HCC method using the thermal power signals and Van't Hoff's law were both employed to estimate the water sorption enthalpy. Sorption enthalpy of water in both polymers was determined to be approximately -40 kJ/mol for all water activity levels. Zimm-Lundberg analysis showed that water clusters start to form at a water activity of 0.4. The engaged species induced clustering (ENSIC) model was used to curve fit sorption isotherms and showed that the affinity among water molecules is higher than that between water molecules and polymer chains. All the methods used indicate that clustering of water molecules exists in both polymers.

36 MATERIALS SCIENCE↗

Characterization of the deep levels responsible for non-radiative recombination in InGaN/GaN light-emitting diodes

This paper presents an extensive investigation of the deep levels related to non-radiative recombination in InGaN/GaN light-emitting diodes (LEDs). The study is based on combined optical and deep-level transient spectroscopy measurements, carried out on LEDs with identical structure and with different values of the non-radiative recombination coefficient. Experimental data lead to the following, relevant, results: (i) LEDs with a high non-radiative recombination coefficient have a higher concentration of a trap (labeled as “e{sub 2}”) with an activation energy of 0.7 eV, which is supposed to be located close to/within the active region; (ii) measurements carried out with varying filling pulse duration suggest that this deep level behaves as a point-defect/dislocation complex. The Arrhenius plot of this deep level is critically compared with the previous literature reports, to identify its physical origin.

36 MATERIALS SCIENCE↗

Molecular dynamical simulation of the behavior of early precipitated stage in aging process in dilute Cu-Cr alloy

The aging behaviors of Cu-Cr alloys in the early stage at different temperatures are investigated by molecular dynamics simulations. First principles potentials are used for the interactions between Cu and Cr atoms. The initial behavior of precipitation is characterized by transmission electron microscope and electron energy disperse spectroscopy. The results showed that Cu-Cr supersaturated solid solution is thermodynamically unstable. The mean-square displacements of the atoms are used to describe the diffusivity. At room temperature, the atoms only show harmonic vibrations near the equilibrium positions. The mutual diffusion at 873 K is different from the unidirectional diffusion in low temperatures. The calculation shows that aging process is accelerated with increasing temperature, which is not only due to the lower diffusion activation energy of Cr at higher temperature, but also because Cu atoms are also participated in the aging process. When ''aging'' at 1073 K, the precipitation of Cr element is dissolved again into Cu matrix, which is an ''over-aging'' state of Cu-Cr alloy at high temperature.

36 MATERIALS SCIENCE↗

Defect Spirograph: Dynamical Behavior of Defects in Spatially Patterned Active Nematics

We report that topological defects in active liquid crystals can be confined by introducing gradients of activity. Here, we examine the dynamical behavior of two defects confined by a sharp gradient of activity that separates an active circular region and a surrounding passive nematic material. Continuum simulations are used to explain how the interplay among energy injection into the system, hydrodynamic interactions, and frictional forces governs the dynamics of topologically required self-propelling + 1/2 defects. Our findings are rationalized in terms of a phase diagram for the dynamical response of defects in terms of activity and frictional damping strength. Different regions of the underlying phase diagram correspond to distinct dynamical modes, namely immobile defects, steady rotation of defects, bouncing defects, bouncing-cruising defects, dancing defects, and multiple defects with irregular dynamics. These dynamic states raise the prospect of generating synchronized defect arrays for microfluidic applications.

36 MATERIALS SCIENCE↗