SEARCH · Search NASA

Results for “Simulation framework”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

DOE OSTI2025

A quantitative risk assessment framework for fault reactivation in underground hydrogen storage: Coupled simulation and deep learning approach

Underground hydrogen storage (UHS) is emerging as a critical solution for large-scale energy storage. However, like all subsurface fluid injection activities, UHS poses the risk of injection-induced fault reactivation. Accurate risk assessment is essential to ensuring the safety and efficiency of UHS operations. This study presents the development of deep-learning surrogate models for fault reactivation prediction in UHS, trained on a comprehensive database of fully coupled fluid flow-geomechanics simulations. Our findings reveal that analytical models often yield unreliable estimates, with errors up to 54% in the allowable injection pressure, potentially leading to a 40% reduction in UHS operational capacity. The developed surrogate models were incorporated into a quantitative risk assessment (QRA) framework, enabling probabilistic evaluation of fault reactivation risk while accounting for uncertainties in the input variables. Site-specific features, such as horizontal stress gradients, fault’s dip and strike angles, and operational parameters like bottom-hole injection pressure and well-fault distance, were identified as the primary drivers of fault reactivation across various stress regimes. Whereas other hydraulic, geological, and poroelastic reservoir properties were found to have a secondary impact. Notably, we observed that the risk of fault reactivation for a critically oriented fault with a static friction coefficient greater than 0.55 remains below 10% in a normal faulting stress regime. However, the risk significantly increases as the stress regime transitions from normal to strike-slip and ultimately to reverse faulting conditions. These findings underscore the importance of rigorous site characterization and comprehensive QRA evaluations to optimize UHS performance and minimize geomechanical risks.

25 ENERGY STORAGE↗

DOE OSTI2025

FIRE: A Failure-Adaptive RL Framework for Edge Computing Migrations

In edge computing, users' service profiles are migrated between edge servers due to user mobility. Reinforcement Learning (RL) frameworks have been proposed to do so, often trained on simulated data. However, existing RL frameworks overlook occasional server failures, which although rare, impact latency-sensitive applications like AR/VR and real- time obstacle detection. These rare failures, being not adequately represented in historical training data, pose a challenge for data-driven RL algorithms. We introduce FIRE, a framework that adapts to rare events by training a RL policy in an edge computing digital twin environment. We propose FIRE-ImRE, an importance sampling-based Q-learning algorithm, which samples rare events proportionally to their impact on the value function. FIRE considers delay, migration, failure, and backup placement costs across individual and shared service profiles. We prove FIRE-ImRE's boundedness and convergence to optimality. Next, we introduce novel deep Q-learning (FIRE-ImDQL) and actor critic (FIRE-ImACRE) versions of our algorithm to enhance scalability. Here, we extend our framework to accommodate users with varying risk tolerances of rare failure events. Through trace-driven experiments, we show that FIRE reduces edge computing costs compared to vanilla RL and the greedy baseline in the event of failures.

Edge computing↗

DOE OSTI2025

Sensitivity of tropical orographic precipitation to wind speed with implications for future projections

Abstract. Some of the rainiest regions on Earth lie upstream of tropical mountains, where the interaction of prevailing winds with orography produces frequent precipitating convection. Yet the response of tropical orographic precipitation to the large-scale wind and temperature variations induced by anthropogenic climate change remains largely unconstrained. Here, we quantify the sensitivity of tropical orographic precipitation to background cross-slope wind using theory, idealized simulations, and observations. We build on a recently developed theoretical framework that characterizes the orographic enhancement of seasonal mean precipitation, relative to upstream regions, as a response of convection to cooling and moistening of the lower free troposphere by stationary orographic gravity waves. Using this framework and convection-permitting simulations, we show that higher cross-slope wind speeds deepen the penetration of the cool and moist gravity wave perturbation upstream of orography, resulting in a mean rainfall increase of 20 % (m s−1)−1 to 30 % (m s−1)−1 increase in cross-slope wind speed. Additionally, we show that orographic precipitation in five tropical regions exhibits a similar dependence on changes in cross-slope wind at both seasonal and daily timescales. Given next-century changes in large-scale winds around tropical orography projected by global climate models, this strong scaling rate implies wind-induced changes in some of Earth's rainiest regions that are comparable with any produced directly by increases in global mean temperature and humidity.

Nicolas, Quentin (ORCID:000000024116973X)↗

NASA NTRS2014

The Parallel System for Integrating Impact Models and Sectors (pSIMS)

We present a framework for massively parallel climate impact simulations: the parallel System for Integrating Impact Models and Sectors (pSIMS). This framework comprises a) tools for ingesting and converting large amounts of data to a versatile datatype based on a common geospatial grid; b) tools for translating this datatype into custom formats for site-based models; c) a scalable parallel framework for performing large ensemble simulations, using any one of a number of different impacts models, on clusters, supercomputers, distributed grids, or clouds; d) tools and data standards for reformatting outputs to common datatypes for analysis and visualization; and e) methodologies for aggregating these datatypes to arbitrary spatial scales such as administrative and environmental demarcations. By automating many time-consuming and error-prone aspects of large-scale climate impacts studies, pSIMS accelerates computational research, encourages model intercomparison, and enhances reproducibility of simulation results. We present the pSIMS design and use example assessments to demonstrate its multi-model, multi-scale, and multi-sector versatility.

crop modeling↗

DOE OSTI2026

Machine Learning Interatomic Potentials for Modeling Framework Flexibility and Water Uptake in NbOFFIVE-1-Ni Metal–Organic Framework

Metal–organic frameworks (MOFs), with their distinctive porous structures and tunable chemical properties, have shown immense promise in the separation and storage of gases. Currently, the accurate simulation of their adsorptive properties remains challenging, especially for systems where the molecules fit very tightly into the pores. Traditional simulation methods often approximate the frameworks as rigid and do not account for the framework flexibility seen in materials such as NbOFFIVE-1-Ni. First-principles molecular dynamics (FPMD) simulations offer the desired accuracy in modeling this flexibility but are limited by their extensive computational demands, rendering them impractical for long simulations. Conversely, classical force field-based simulations offer computational efficiency but lack the necessary accuracy. Here, to break this accuracy-efficiency trade-off, we have developed machine learning interatomic potentials trained on energies and forces from FPMD to model the framework flexibility of NbOFFIVE-1-Ni in the presence of water over nanosecond time scales. Furthermore, by integrating MLIP-driven molecular dynamics (MLIP-MD) with grand canonical Monte Carlo (GCMC) simulations, we further incorporated framework flexibility into adsorption predictions, yielding water adsorption isotherms that better align with experimental data compared to those of conventional GCMC simulations. These advances offer new opportunities for the design and optimization of MOFs in gas storage and separation applications.

adsorption↗

DOE OSTI2024

Enabling Scale-Up Through Multi-Fidelity Adaptive Computing

We present ideas from our ongoing work in adaptive computing - an optimization framework that allows us to strategically deploy various fidelity level experiments and simulations to guide decision making. The framework aims to enable uncertainty quantified scale-up of simulations and experiments, which causes increased complexity. A key feature of the framework is the integration of user-specified local model trustworthiness estimates. Adaptive sampling strategies allow us to optimally exploit the multiple fidelity level information and trustworthiness measures to arrive at the best decisions within a highly limited budget of objective function evaluations.

adaptive sampling↗

NASA NTRSDate not supplied

A Flexible Multibody Approach to Space Launch System Liftoff Pad Separation with Umbilical Disconnect

Joel W Sills↗

DOE OSTI2026

Scientific Discovery with Physics-Informed System Identification (Abbreviated Report)

My fellowship research focused on making physics-based simulations faster and more useful through machine learning. Many problems in science and engineering are governed by partial differential equations, but high-fidelity simulations are often too expensive to run repeatedly. I worked on improving Latent Space Dynamics Identification (LaSDI), a reduced-order modeling framework that compresses large simulation data sets into a smaller representation and then learns how that representation evolves over time. The motivation was to develop reduced models that remain accurate for more challenging systems, especially when predictions must remain reliable over long time intervals or when the underlying dynamics are more complicated than standard methods can easily handle. I also contributed to related work on Quandary, a high-performance software effort for simulation and control of open quantum systems, before focusing primarily on Latent Space Dynamics Identification methods. The main outcomes of the fellowship were two new algorithms (both of which were published), Rollout-LaSDI and Higher-Order LaSDI, together with supporting work on multi-stage Latent Space Dynamics Identification. Rollout-LaSDI improved long-term prediction by training the model to stay accurate over extended time horizons, and Higher-Order LaSDI broadened the method so it could model systems with higher-order time dynamics. My contributions to multistage Latent Space Dynamics Identification also helped show that its later training stages could be simplified without losing effectiveness, and that this behavior held across different model architectures and training strategies. Taken together, these advances improved the accuracy, flexibility, and practical value of reduced-order modeling tools for computational science.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Trusted Simulation: Considering Model Quality in the Context of User Trust

A high‐quality simulation model should help its users to easily and appropriately calibrate their trust in the model. Traditional evaluation metrics such as validation and robustness are necessary but insufficient for this task. Trust calibration depends on factors like the model's transparency, applicability to intended use, usability, reputation, and consideration of potential bias. This article proposes a framework for designing and evaluating system dynamics models by considering factors that contribute to the proper calibration of user trust. This framework takes inspiration from trusted artificial intelligence, broadening our traditional concept of model quality and explicitly focusing on what users need to consider a model trustworthy and to understand the model's relevance to its intended purpose. The trusted simulation framework can improve our integration of model quality activities throughout the modeling process, leading to more impactful and better‐targeted model design, development, and evaluation.

Naugle, Asmeret Bier [Sandia National Laboratories↗

DOE OSTI2025

Turbulence simulations of drift-Alfvén wave effects on edge-localized modes and divertor target heat flux width

A series of BOUT++ turbulence simulations are performed for two Pre-Fusion Power Operation (PFPO-1,2) phases of the ITER Research plan proclaimed in 2019. Linear simulation results show that PFPO-1 is unstable to Peeling-ballooning modes (PB), while the PFPO-2 is unstable to the coupling of PB and Drift-Alfvén wave (DAW) instabilities. The linear results are qualitatively consistent with the dispersion relation of DAW. To study the influence of the DAW on the edge-localized mode (ELM) crash, the PFPO-2 is adopted in this section. Different from the grassy ELM in [Li et al 2022 Nucl. Fusion 62, 096030], nonlinear simulations show that the ELM size of PFPO-2 is almost one-third of the grassy ELM, representing a distinct small ELM. However, simulations then show that if the PB instability is removed, the fluctuation amplitude drops by an order of magnitude and the ELM crash disappears, which is in accord with the theory in [Xu et al 2010 Physical Review Letters, Vol. 105, 175005] and the results in [Li et al 2022 Nucl. Fusion 62, 096030], confirming that the PB instability is a necessary condition for an ELM crash. Furthermore, removing the DAW drive also suppresses ELM crashes, implying that PB instability is necessary but insufficient for PFPO-2 ELM and that DAW could amplify PB-driven turbulence. In addition, by integrating results of both PFPO phases by BOUT++ turbulence analysis with heat flux width (λ q ) and electron thermal diffusivity (χ e ), these simulations establish a predictive framework for heat flux width and its dominant mechanisms, thereby providing a comprehensive scheme for the prediction of the heat flux width. Moreover, simulations indicate that DAW driving can increase the transport coefficient by enhancing the turbulent transport, leading to a broadened heat flux width once the transport coefficient exceeds

Drift-Alfvén wave↗

DOE OSTI2026

ChemGraph as an agentic framework for computational chemistry workflows

Atomistic simulations are essential in chemistry and materials science but remain challenging to run due to the expert knowledge required for the setup, execution, and validation stages of these calculations. We present ChemGraph, an agentic framework powered by artificial intelligence and state-of-the-art simulation tools to streamline and automate computational chemistry and materials science workflows. ChemGraph leverages graph neural network-based foundation models for accurate yet computationally efficient calculations and large language models (LLMs) for natural language understanding, task planning, and scientific reasoning to provide an intuitive and interactive interface. We evaluate ChemGraph across 13 benchmark tasks and demonstrate that smaller LLMs (GPT-4o-mini, Claude-3.5-haiku, Qwen-2.5-14B) perform well on simple workflows, while more complex tasks benefit from using larger models. Importantly, we show that decomposing complex tasks into smaller subtasks through a multi-agent framework enables GPT-4o to reach perfect accuracy and smaller LLMs to match or exceed single-agent GPT-4o's performance in these benchmarks.

Computational chemistry↗

DOE OSTI2026

Regional Earthquake Ground Motion Simulations for Southern California With EQSIM: Insights From the 2008 Chino Hills, 2024 Highland Park, and 2021 Carson Earthquakes

This study presents physics-based, 3D simulations using the EQSIM framework for several earthquakes in the Los Angeles region. The primary objective was to assess the ability of deterministic physics-based ground motion simulations to reproduce the observed motions from historical events. The selected events included the mathematical equation M w 5.4 2008 Chino Hills, the mathematical equation M w 4.4 2024 Highland Park, and the mathematical equation M w 4.3 2021 Carson events. The simulated motions were evaluated by comparing the recorded and simulated seismograms, as well as the Fourier amplitude spectra, across multiple seismic stations. The SCEC 3D velocity model, CVM-S4.26.M01, was used to represent the regional geology, and ground motion simulations were carried out with a resolution of up to 5 Hz. The results indicate that the simulated motions captured the recorded motions up to approximately 4 Hz. While careful iterations regarding source parameters and corner frequencies were required, and, for the case of the Highland Park event, some of the near-source stations had relatively low accuracy, the present study established a positive step toward the utilization of physics-based simulations in practical applications. The computational efficiencies exhibited by EQSIM, especially on GPU clusters, further supported this assertion, as wall-clock times of simulations involving more than 10 billion grid points were as low as mathematical equation minutes. This permits ensemble simulations for a considered scenario event so that modeling uncertainties (e.g., source and geology) can be bracketed.

EQSIM↗

DOE OSTI2024

An Evaluation of The Dynamic Physical Security Risk Assessment Methodology for Fleet-Wide Applications

The requirements for U.S. nuclear power plants to maintain a large onsite physical security force contribute to their high operational costs. The cost of maintaining the current physical security posture is approximately 10% of the overall operation and maintenance budget for commercial nuclear power plants. The goal of the Light Water Reactor Sustainability (LWRS) program’s physical security pathway is to develop tools, methods, and technologies and provide the technical basis for an optimized physical security posture. The conservatisms built into current security postures may be analyzed and minimized to reduce security costs while still ensuring adequate security and operational safety. The research performed at Idaho National Laboratory within LWRS program’s physical security pathway has successfully developed a dynamic force-on-force modeling framework using various computer simulation tools and integrating them with the dynamic assessment Event Modeling Risk Assessment using Linked Diagrams (EMRALD) tool. This integrated process for physical security analysis is named Modeling and Analysis for Safety Security using Dynamic EMRALD Framework (MASS-DEF). This document provides an update on the progress in applying the MASS-DEF process to an operating commercial nuclear power plant as well as additional industry feedback regarding use of the tool for other physical security risk-informed topics. This report is only a summary of the progress and does not contain specific modeling results as those contain sensitive security information. Previous reports described how a user could integrate their plant-specific force-on-force models with the dynamic simulation tool EMRALD, model operator actions, and integrate with probabilistic risk assessment tools, such as CAFTA (Computer Aided Fault Tree Analysis System) or SAPHIRE (Systems Analysis Programs for Hands-on Integrated Reliability Evaluations), and with thermal-hydraulic tools, such as RELAP-5 or MAAP. Previous reports applied various combinations of available simulations codes with EMRALD using generic plant models to demonstrate how to perform the analysis. This report is an update the progress of applying the dynamic computational framework to an actual nuclear facility using their security scenarios and timelines. This report also provides an update to the procedural guidance for the MASS-DEF process and an overview of the generic models available for use by utilities. This report does not contain any plant’s sensitive information and/or safeguards information. This study’s purpose was to verify that the results achieved using generic models are similar to actual plant results and refine our guidance on the use of the framework. This assessment enables further analysis, such as what-if scenarios and staff-reduction evaluation, thereby optimizing physical security at plants.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2025

Exploring Flood Predictability in Taiwan through Coupled Atmospheric–Hydrological and High-Performance Hydrodynamic Models

Effective flood simulation capabilities can tremendously support early warning and disaster prevention. To examine the applicability of a fully physics-based and high-performance flood simulation and forecasting modeling framework for a flood-prone region in Taiwan, we conduct a numerical experiment that couples the Weather Research and Forecasting (WRF) Model, WRF-Hydrological modeling system (WRF-Hydro), and the Two-Dimensional Runoff Inundation Toolkit for Operational Needs (TRITON) to perform integrated rainfall, streamflow, and flood simulations. Furthermore, we first use the coupled WRF and WRF-Hydro (WWH) to predict rainfall and streamflow and then drive TRITON with the predicted streamflow hydrographs to simulate flood depth and inundation area. With the refined spatial resolution and parameterization, this framework can better predict rainfall with reasonable spatial patterns. Although WWH could overestimate the amount of rainfall in some areas, the uncertain rainfall–streamflow predictions produce reasonable flood maps able to pinpoint regions at risk of flooding. In terms of model efficiency, the graphics processing unit–based computation can yield a speed-up factor as high as ∼13 compared to the central processing unit–based computation, promoting the efficacy of the coupled modeling framework in practical real-time flood forecasting.

Coupled models↗

DOE OSTI2024

Predicting Partial Atomic Charges in Metal–Organic Frameworks: An Extension to Ionic MOFs

Molecular simulation is an invaluable tool to predict and understand the usage of metal–organic frameworks (MOFs) for gas storage and separation applications. Accurate partial atomic charges, commonly obtained from density functional theory (DFT) calculations, are often required to model the electrostatic interactions between the MOF and adsorbates, especially when the adsorbates have dipole or quadrupole moments, such as water and CO 2 . Machine learning (ML) models have been previously employed to predict partial charges and avoid the computational cost associated with DFT calculations. However, previous ML models suffer from small training data sets, which limit their scope of application. In this work, we introduce two novel machine learning models, PACMOF2-neutral and PACMOF2-ionic, aimed at predicting the density-derived electrostatic and chemical (DDEC6) partial atomic charges for both neutral and ionic MOFs. These models not only yield DFT-level accuracy at a fraction of the computational cost but also demonstrate a remarkable improvement in prediction of adsorption, as validated with grand canonical Monte Carlo simulations. Furthermore, the robustness and fast computational time of the PACMOF2 models, along with their transferability to other porous materials such as covalent organic frameworks and zeolites, underscores their potential in high-throughput screening of MOFs for diverse applications.

36 MATERIALS SCIENCE↗

NASA NTRSDate not supplied

A Flexible Multibody Approach to Space Launch System Liftoff Pad Separation with Umbilical Disconnect

A flexible multibody dynamic framework is applied to the Space Launch System (SLS) liftoff Coupled Loads Analysis (CLA), enabling computational efficiencies and systematic inclusion of components and various nonlinearities. The objective of this work is to simulate the SLS liftoff transient pad separation event inclusive of umbilical disconnects. The vehicle stacking preloads and cryogenically induced preloads, due to the fueling of the Core Stage (CS), are integrated via specialized deformed coupling procedure to ensure full capture of the liftoff transient event. The Vehicle Stabilizer System (VSS) hydraulic struts are nonlinear and provide amplitude dependent damping, significantly contributing to the liftoff transient event. Ground Extensible Columns (EC) provide additional stiffness and preloads on the Mobile Launcher (ML), also significantly contributing to the liftoff transient. An advanced Henkel-Mar algorithm, with separation and re-contact, thus tracking the potential post separation re-contact between the booster aft skirt and ML, the umbilicals and vehicle, and ground EC separation. For this system level nonlinear dynamic simulation, the flexible multibody framework provides a systematic approach for the addition of component specific algorithms to enforce nonlinearities. This multibody framework is similar to an object-oriented programming language integrating classes of associated subroutines. As such, the complexities associated with the nonlinear CLA are greatly reduced, facilitating simplified bookkeeping as well as accelerating the execution of the nonlinear time-domain simulations.

Joel W Sills Jr.↗

NASA NTRS2011

A Prototyping Effort for the Integrated Spacecraft Analysis System

Computer modeling and simulation has recently become an essential technique for predicting and validating spacecraft performance. However, most computer models only examine spacecraft subsystems, and the independent nature of the models creates integration problems, which lowers the possibilities of simulating a spacecraft as an integrated unit despite a desire for this type of analysis. A new project called Integrated Spacecraft Analysis was proposed to serve as a framework for an integrated simulation environment. The project is still in its infancy, but a software prototype would help future developers assess design issues. The prototype explores a service oriented design paradigm that theoretically allows programs written in different languages to communicate with one another. It includes creating a uniform interface to the SPICE libraries such that different in-house tools like APGEN or SEQGEN can exchange information with it without much change. Service orientation may result in a slower system as compared to a single application, and more research needs to be done on the different available technologies, but a service oriented approach could increase long term maintainability and extensibility.

mission planning↗

NASA NTRS1994

Sensor Fault Detection and Diagnosis Simulation of a Helicopter Engine in an Intelligent Control Framework

This paper presents an application of a fault detection and diagnosis scheme for the sensor faults of a helicopter engine. The scheme utilizes a model-based approach with real time identification and hypothesis testing which can provide early detection, isolation, and diagnosis of failures. It is an integral part of a proposed intelligent control system with health monitoring capabilities. The intelligent control system will allow for accommodation of faults, reduce maintenance cost, and increase system availability. The scheme compares the measured outputs of the engine with the expected outputs of an engine whose sensor suite is functioning normally. If the differences between the real and expected outputs exceed threshold values, a fault is detected. The isolation of sensor failures is accomplished through a fault parameter isolation technique where parameters which model the faulty process are calculated on-line with a real-time multivariable parameter estimation algorithm. The fault parameters and their patterns can then be analyzed for diagnostic and accommodation purposes. The scheme is applied to the detection and diagnosis of sensor faults of a T700 turboshaft engine. Sensor failures are induced in a T700 nonlinear performance simulation and data obtained are used with the scheme to detect, isolate, and estimate the magnitude of the faults.

Litt, Jonathan↗