Search NASA⌕ Search

SEARCH · Search NASA

Results for “Small Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Fractal dimensions of rampart impact craters on Mars

Ejecta blanket morphologies of Martian rampart craters may yield important clues to the atmospheric densities during impact, and the nature of target materials (e.g., hard rock, fine-grained sediments, presence of volatiles). In general, the morphologies of such craters suggest emplacement by a fluidized, ground hugging flow instead of ballistic emplacement by dry ejecta. We have quantitatively characterized the shape of the margins of the ejecta blankets of 15 rampart craters using fractal geometry. Our preliminary results suggest that the craters are fractals and are self-similar over scales of approximately 0.1 km to 30 km. Fractal dimensions (a measure of the extent to which a line fills a plane) range from 1.06 to 1.31. No correlations of fractal dimension with target type, elevation, or crater size were observed, though the data base is small. The range in fractal dimension and lack of correlation may be due to a complex interplay of target properties (grain size, volatile content), atmospheric pressure, and crater size. The mere fact that the ejecta margins are fractals, however, indicates that viscosity and yield strength of the ejecta were at least as low as those of basalts, because silicic lava flows are not generally fractals.

Ching, Delwyn↗
NASA NTRS1993

Structural similitude and design of scaled down laminated models

The excellent mechanical properties of laminated composite structures make them prime candidates for wide variety of applications in aerospace, mechanical and other branches of engineering. The enormous design flexibility of advanced composites is obtained at the cost of large number of design parameters. Due to complexity of the systems and lack of complete design based informations, designers tend to be conservative in their design. Furthermore, any new design is extensively evaluated experimentally until it achieves the necessary reliability, performance and safety. However, the experimental evaluation of composite structures are costly and time consuming. Consequently, it is extremely useful if a full-scale structure can be replaced by a similar scaled-down model which is much easier to work with. Furthermore, a dramatic reduction in cost and time can be achieved, if available experimental data of a specific structure can be used to predict the behavior of a group of similar systems. This study investigates problems associated with the design of scaled models. Such study is important since it provides the necessary scaling laws, and the factors which affect the accuracy of the scale models. Similitude theory is employed to develop the necessary similarity conditions (scaling laws). Scaling laws provide relationship between a full-scale structure and its scale model, and can be used to extrapolate the experimental data of a small, inexpensive, and testable model into design information for a large prototype. Due to large number of design parameters, the identification of the principal scaling laws by conventional method (dimensional analysis) is tedious. Similitude theory based on governing equations of the structural system is more direct and simpler in execution. The difficulty of making completely similar scale models often leads to accept certain type of distortion from exact duplication of the prototype (partial similarity). Both complete and partial similarity are discussed. The procedure consists of systematically observing the effect of each parameter and corresponding scaling laws. Then acceptable intervals and limitations for these parameters and scaling laws are discussed. In each case, a set of valid scaling factors and corresponding response scaling laws that accurately predict the response of prototypes from experimental models is introduced. The examples used include rectangular laminated plates under destabilizing loads, applied individually, vibrational characteristics of same plates, as well as cylindrical bending of beam-plates.

Simitses, G. J.↗
NASA NTRS1995

A PC-based magnetometer-only attitude and rate determination system for gyroless spacecraft

This paper describes a prototype PC-based system that uses measurements from a three-axis magnetometer (TAM) to estimate the state (three-axis attitude and rates) of a spacecraft given no a priori information other than the mass properties. The system uses two algorithms that estimate the spacecraft's state - a deterministic magnetic-field only algorithm and a Kalman filter for gyroless spacecraft. The algorithms are combined by invoking the deterministic algorithm to generate the spacecraft state at epoch using a small batch of data and then using this deterministic epoch solution as the initial condition for the Kalman filter during the production run. System input comprises processed data that includes TAM and reference magnetic field data. Additional information, such as control system data and measurements from line-of-sight sensors, can be input to the system if available. Test results are presented using in-flight data from two three-axis stabilized spacecraft: Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) (gyroless, Sun-pointing) and Earth Radiation Budget Satellite (ERBS) (gyro-based, Earth-pointing). The results show that, using as little as 700 s of data, the system is capable of accuracies of 1.5 deg in attitude and 0.01 deg/s in rates; i.e., within SAMPEX mission requirements.

Challa, M.↗
NASA NTRS1994

Large-scale characteristics of interstellar dust from COBE DIRBE observations

Observations from the COBE Diffuse Infrared Background Experiment of the 140 and 240 micrometer emissions from the Galatic plane region (absolute value of b less than 10 deg) are combined with radio surveys that trace the molecular (H2), neutral atomic (H I), and extended low-density (n(sub e) approximately 10 to 100/cm(exp 3)) ionized (H II) gas phases of the interstellar medium to derive physical conditions such as the dust temperature, dust-to-gas mass ratio, and far-infrared emissivity (1) averaged over these gas phases along each line of sight and (2) within each of these three gas phases. This analysis shows large-scale longitudinal and latitudinal gradients in the dust temperature and a decrease in dust temperature with increasing Galactocentric distance. The derived dust temperatures are significantly different from those derived in similar analyses using the Infrared Astronomical Satellite (IRAS) 60 and 100 micrometer data, suggesting that small (5 A approximately less than radius approximately less than 200 A) transiently heated dust particles contribute significantly o the Galactic 60 micrometer emission. It is found that 60% to 75% of the far-infrared luminosity arises from cold (approximately 17 to 22 K) dust associated with diffuse H I clouds, 15% to 30% from cold (approximately 19 K) dust associated with molecular gas, and less than 10% from warm (approximately 29 K) dust in extended low-density H II regions, consistent with the results of the IRAS analyses of the Galactic 60 and 100 micrometer emission. Within 2 deg of longitude of the Galactic center, the derived gas-to-dust mass ratio along the line of sight, G(sub d), reverses its general trend of decreasing G(sub d) toward the inner Galaxy and increases by a factor of approximately 2 to 3 toward the Galactic center. One possible explanation for this result is that the ratio of H2 column density to (12)CO intensity is lower in the Galactic center region than in the Galactic disk.

Sodroski, T. J.↗
NASA NTRS1994

Do gamma-ray bursts originate from an extended Galactic Halo of high-velocity neutron stars?

The gamma-ray burst brightness distribution is inhomogeneous and the distribution on the sky is nearly isotropic. These features argue against an association of gamma-ray bursts with those Galactic objects that are known to exhibit a strong concentration toward the Galactic center or plane. The observed statistical properties indicate a cosmological origin. Circumstantial evidence suggests that neutron stars are involved in the burst phenomenon. Here we consider Population II neutron stars in an extended Galactic Halo (EGH) as an alternative to cosmological scenarios. The Burst and Transient Source Experiment (BATSE) data indicate a small deviation from isotropy near the 2 sigma level of statistical significance. If confirmed for an increasing number of bursts, these anisotropies could rule out cosmological scenarios. On the other hand, EGH models require small anisotropies like those observed by BATSE. We consider simple distribution models to determine the generic properties such halos must have to be consistent with the observations and discuss the implications of the corresponding distance scale on burst models.

Hartmann, Dieter H.↗
NASA NTRS1995

Line formation in collapsing cloud cores with rotation and applications to B335 and IRAS 16293-2422

We present radiative transfer models of collapsing clouds with rotation and apply them to B335 and IRAS 16293-2422, the two best candidates of protostellar collapse known to date. By including rotation in the manner of Tereby, Shu, & Cassen (1984), we can reproduce the profiles of several molecular lines not only toward the center position, but also toward a grid of positions near the center. We find that the model of B335 by Zhou et al. (1993) is not affected significantly by the presence of rotation. By including rotation, we can reproduce the observations of IRAS 16293-2422 by Menden et al. (1987); hence, we support the infall interpretations of spectral lines from IRAS 16293-2422 proposed by Walker et al. (1986). We also observed the large-scale rotation of IRAS 16293-2422 in the C(18)O J = 2 approaches 1 line. The observed rotation rate is a factor of 6 smaller than that required to explain the small-scale CS data of Menden et al. (1987). This probably means the precollapse cloud has differential rotation, possibly due to more efficient magnetic braking on large scales.

Zhou, Shudong↗
NASA NTRS1995

Touchdown dynamics

Aircraft tire wear results from operating conditions that are quite different from those encountered in land vehicles. One of the most important of these is touchdown, where the tire suddenly spins up from zero to a large angular velocity. This phenomenon is studied from both the analytical and experimental points of view. The analysis is basic, using elementary properties of the tire and wheel. It results in a new dimensionless description of the process. The experimental study consists primarily of small scale laboratory data, although limited full scale tire data is also presented. The data show increasing weight loss during touchdown as the dimensionless severity increases.

Clark, Samuel K.↗
NASA NTRS1997

Composite Matrix Regenerator for Stirling Engines

This project concerns the design, fabrication and testing of carbon regenerators for use in Stirling power convertors. Radial fiber design with nonmetallic components offers a number of potential advantages over conventional steel regenerators: reduced conduction and pressure drop losses, and the capability for higher temperature, higher frequency operation. Diverse composite fabrication methods are explored and lessons learned are summarized. A pulsed single-blow test rig has been developed that has been used for generating thermal effectiveness data for different flow velocities. Carbon regenerators have been fabricated by carbon vapor infiltration of electroflocked preforms. Performance data in a small Stirling engine are obtained. Prototype regenerators designed for the BP-1000 power convertor were fabricated and delivered to NASA-Lewis.

Knowles, Timothy R.↗
NASA NTRS1997

Final Technical Report

We have analysed ROSAT X-ray data for a small sample of starburst galaxies in order to understand the physical origin of the X-ray emission and probe the physics and phenomenology of galactic-scale outflows of hot gas ('superwinds') that are driven by tile mechanical energy supplied by the ensemble of supernovae in the starbursts. We have found that the X-ray emission in the ROSAT energy band comes from a population of compact hard sources (most likely X-ray binaries) and hot diffuse gas with a temperature ranging from a few to ten million K. This gas is spatially-extended on galactic scales and its properties are entirely consistent with theoretical expectations for a starburst-driven superwind. The starbursts studied span a range of roughly 1000 in bolometric luminosity and are hosted by galaxies ranging from dwarfs through L* spirals through ma,ior galactic mergers. The X-ray properties of these o@jecls scale in a natural way with the luminosity of tile starburst: more powerful starbursts are more X-ray luminous and create hot outflowing gas whose energy content is likewise larger.

Heckman, Timothy M.↗
NASA NTRS2000

The MEMS Knudsen Compressor as a Vacuum Pump for Space Exploration Applications

Several lander, probe and rover missions currently under study at the Jet Propulsion Laboratory (JPL) and especially in the Microdevices Laboratory (MDL) Center for Space Microelectronics Technology, focus on utilizing microelectromechanical systems (MEMS) based instruments for science data gathering. These small instruments and NASA's commitment to "faster, better, cheaper" type missions has brought about the need for novel approaches to satisfying mission requirements. Existing in-situ instrument systems clearly lack novel and integrated methods for satisfying their vacuum needs. One attractive candidate for a MEMS vacuum pump is the Knudsen Compressor, which operates based on thermal transpiration. Thermal transpiration describes gas flows induced by temperature differences maintained across orifices, porous membranes or capillary tubes under rarefied conditions. This device has two overwhelmingly attractive features as a MEMS vacuum pump - no moving parts and no fluids. An initial estimate of a Knudsen Compressor's pumping power requirements for a surface atmospheric sampling task on Mars is less than 80 mW, significantly below than alternative pumps. Due to the relatively low energy use for this task and the applicability of the Knudsen Compressor to other applications, the development of a Knudsen Compressor utilizing MEMS fabrication techniques has been initiated. This paper discusses the initial fabrication of a single-stage MEMS Knudsen Compressor vacuum pump, provides performance criteria such as pumping speed, size, energy use and ultimate pressure and details vacuum pump applications in several MDL related in-situ instruments.

Vargo, S. E.↗
NASA NTRS1999

Progress in Design and Construction of the Optical Communications Laser Laboratory

The deployment of advanced hyperspectral imaging and other Earth sensing instruments on board Earth observing satellites is driving the demand for high-data-rate communications. Optical communications meet the required data rates with small, low mass, and low-power communications packages. JPL, as NASA's lead center in optical communications, plans to construct a 1-m Optical Communications Telescope Laboratory (OCTL) at its Table Mountain Facility (TMF) complex in the San Gabriel Mountains of Southern California. The design of the building has been completed, and the construction contractor has been selected. Ground breaking is expected to start at the beginning of the 1999 TMF construction season. A request for proposal (RFP) has been issued for the procurement of the telescope system. Prior to letting the RFP we conducted a request for information with industry for the telescope system. Several vendors responded favorably and provided information on key elements of the proposed design. These inputs were considered in developing the final requirements in the RFP. Keywords: Free space optical communications, lasercom, telescopes, ground stations, adaptive optics, astrometry, Table Mountain Facility

Wilson, K. E.↗
NASA NTRS2001

Nonvolatile Memory Solution for Near-Term NASA Missions

Nonvolatile memory (NVM) system that could reliably function in extreme environments is one of the most critical components for many spacecrafts being developed for NASA missions to be launched in next four to seven years. NVM supports the computer system in saving and updating critical state data required for a warm restart after power cycling or in case of a power bus failure. It also provides a power independent mass storage capacity for the scientific data gathered by the instruments. In some cases the window for gathering such data is very small and occurs only once in a given mission. Commercially popular and fully developed Flash NVM technology is inappropriate for many reasons such as the limited read write cycles with slower access speeds, radiation intolerance, higher Single Event Upsets (SEU) rates, etc. It is desirable to have an NVM system based upon a robust cell technology making it immune to the SEUs and with sufficient radiation hardness. Availability of such NVM system seems to be still 5 to 10 years in the future. Meanwhile, it is possible to provide an interim hybrid solution by combining the existing rad-hard technologies. Additional information is contained in the original extended abstract.

Patel, J. U.↗
NASA NTRS2001

Integrated Operations Architecture Technology Assessment Study

As part of NASA's Integrated Operations Architecture (IOA) Baseline, NASA will consolidate all communications operations. including ground-based, near-earth, and deep-space communications, into a single integrated network. This network will make maximum use of commercial equipment, services and standards. It will be an Internet Protocol (IP) based network. This study supports technology development planning for the IOA. The technical problems that may arise when LEO mission spacecraft interoperate with commercial satellite services were investigated. Commercial technology and services that could support the IOA were surveyed, and gaps in the capability of existing technology and techniques were identified. Recommendations were made on which gaps should be closed by means of NASA research and development funding. Several findings emerged from the interoperability assessment: in the NASA mission set, there is a preponderance of small. inexpensive, low data rate science missions; proposed commercial satellite communications services could potentially provide TDRSS-like data relay functions; and. IP and related protocols, such as TCP, require augmentation to operate in the mobile networking environment required by the space-to-ground portion of the IOA. Five case studies were performed in the technology assessment. Each case represented a realistic implementation of the near-earth portion of the IOA. The cases included the use of frequencies at L-band, Ka-band and the optical spectrum. The cases also represented both space relay architectures and direct-to-ground architectures. Some of the main recommendations resulting from the case studies are: select an architecture for the LEO/MEO communications network; pursue the development of a Ka-band space-qualified transmitter (and possibly a receiver), and a low-cost Ka-band ground terminal for a direct-to-ground network, pursue the development of an Inmarsat (L-band) space-qualified transceiver to implement a global, low data rate network for LEO/MEO, mission spacecraft; and, pursue developmental research for a miniaturized, high data rate optical transceiver.

Source record↗
NASA NTRS2002

A New Forced Oscillation Capability for the Transonic Dynamics Tunnel

A new forced oscillation system has been installed and tested at NASA Langley Research Center's Transonic Dynamics Tunnel (TDT). The system is known as the Oscillating Turntable (OTT) and has been designed for the purpose of oscillating, large semispan models in pitch at frequencies up to 40 Hz to acquire high-quality unsteady pressure and loads data. Precisely controlled motions of a wind-tunnel model on the OTT can yield unsteady aerodynamic phenomena associated with flutter, limit cycle oscillations, shock dynamics, and non-linear aerodynamic effects on many vehicle configurations. This paper will discuss general design and components of the OTT and will present test data from performance testing and from research tests on two rigid semispan wind-tunnel models. The research tests were designed to challenge the OTT over a wide range of operating conditions while acquiring unsteady pressure data on a small rectangular supercritical wing and a large supersonic transport wing. These results will be presented to illustrate the performance capabilities, consistency of oscillations, and usefulness of the OTT as a research tool.

Piatak, David J.↗
NASA NTRS2003

A Survey of Massive Planets by Direct Imaging with Advanced Adaptive Optics

The observations are completed. The observing that has been done essentially on the Canada-France-Hawaii Telescope with the PUEO adaptive optics system, is sufficient to identify approximately 10 Jupiter masses objects around the selected targets. A small amount of data was also collected on the Gemini Telescope with the Hokupa'a adaptive optics system. For most of the stars of the sample, about 30mn of exposure time was collected per epoch, with at least 2 epochs. About 15% of the stars of the sample did not meet these requirements, due to observing difficulties listed below: (1) Guide star is too faint for the AO system; (2) The guide star is a close double (about 0.5 to 1 inch separation), which makes it unsuitable for AO guiding; (3) For a few stars, weather and observing constraints could not allow observations.

Owen, Tobias C.↗
NASA NTRS2004

Initial Efforts toward Mission-Representative Imaging Surveys from Aerial Explorers

Numerous researchers have proposed the use of robotic aerial explorers to perform scientific investigation of planetary bodies in our solar system. One of the essential tasks for any aerial explorer is to be able to perform scientifically valuable imaging surveys. The focus of this paper is to discuss the challenges implicit in, and recent observations related to, acquiring mission-representative imaging data from a small fixed-wing UAV, acting as a surrogate planetary aerial explorer. This question of successfully performing aerial explorer surveys is also tied to other topics of technical investigation, including the development of unique bio-inspired technologies.

Pisanich, Greg↗
NASA NTRS1951

Preliminary Results Obtained from Flight Test of a 1/7-Scale Rocket-Powered Model of the Grumman XF10F Airplane Configuration in the Swept-Wing Condition, TED No. NACA DE 354

A flight investigation of a 1/7-scale rocket-powered model of the XF10F Grumman XFl0F airplane in the swept-wing configuration has been made. The purpose of this test was to determine the static longitudinal stability, damping in pitch, and longitudinal control effectiveness of the airplane with the center of gravity at 20 percent of the wing mean aerodynamic chord. Only a small amount of data was obtained from the test because, immediately after booster separation at a Mach number of 0.88, the configuration was directionally unstable and diverged in sideslip. Simultaneous with the sideslip divergence, the model became longitudinally unstable at 3 degree angle of attack and -6 degree sideslip and diverged in pitch to a high angle of attack. During the pitch-up the free-floating horizontal tail became unstable at 5 degree angle of attack and the tail drifted against its positive deflection limit.

Gardner, William N.↗