Search NASA⌕ Search

SEARCH · Search NASA

Results for “Smoothing methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Calculation of grain boundary normals directly from 3D microstructure images

The determination of grain boundary normals is an integral part of the characterization of grain boundaries in polycrystalline materials. These normal vectors are difficult to quantify due to the discretized nature of available microstructure characterization techniques. The most common method to determine grain boundary normals is by generating a surface mesh from an image of the microstructure, but this process can be slow, and is subject to smoothing issues. A new technique is proposed, utilizing first order Cartesian moments of binary indicator functions, to determine grain boundary normals directly from a voxelized microstructure image. In order to validate the accuracy of this technique, the surface normals obtained by the proposed method are compared to those generated by a surface meshing algorithm. Specifically, the local divergence between the surface normals obtained by different variants of the proposed technique and those generated from a surface mesh of a synthetic microstructure constructed using a marching cubes algorithm followed by Laplacian smoothing is quantified. Next, surface normals obtained with the proposed method from a measured 3D microstructure image of a Ni polycrystal are used to generate grain boundary character distributions (GBCD) for Σ3 and Σ9 boundaries, and compared to the GBCD generated using a surface mesh obtained from the same image. Finally, the results show that the proposed technique is an efficient and accurate method to determine voxelized fields of grain boundary normals.

36 MATERIALS SCIENCE↗

Laboratory investigation and commercial test for rotors-assembled strand applied in smooth tube

In the commercial test for smooth tube inserted with rotors-assembled strand comparing with non-inserted ones on condensers in electric power plant, using water as working fluid, the single-phase pressure drop and heat transfer were measured. It was found difficult to receive reliable and accurate enough data through commercial test. Meanwhile, the single-phase pressure drop and heat transfer in a rotors-assembled strand inserted tube were measured in laboratory, with the tube side Prandtl numbers varying from 5.67 to 5.80 and the tube side Reynolds numbers varying from 21,300 to 72,200. Before that, a validation experiment based on the same smooth tube was carried out to testify the experimental system and the data reduction method, in which fixed mounts were employed to eliminate entrance effects. The Prandtl numbers varied from 5.64 to 5.76 and the Reynolds numbers varied from 19,000 to 56,000 in the tube. The annular side Reynolds numbers remained nearly constant at the value of around 50,000 for all experiments, with the annular side Prandtl numbers varying from 8.02 to 8.22. The experimental results of smooth tube show that employment of fixed mounts leads to a visible bias of friction factor at relative low Reynolds numbers while it hardly affects the Nusselt numbers. On the other hand, experiment for the tube inserted with rotors-assembled strand show remarkable improvement for heat transfer with the Nusselt number increased by 9.764-11.87% and the overall heat transfer coefficient increased by 7.08-7.49% within the range of Reynolds number from about 21,300 to 55,500. Meanwhile, friction factor increases inevitably by 278.1-353.9% within the same range of Reynolds number. Based on through multivariant linear normal regression method, the Reynolds number and Prandtl number dependencies of the Nusselt number and friction factor were determined to be Nu = 0.0031Re{sup 0.9}Pr{sup 1.0849} and f = 0.993Re{sup -0.22}. (author)

42 ENGINEERING↗

Smoothing of surface of silica glass by heat treatment in wet atmosphere

The effect of heat treatment on the surface morphology of fused silica glass substrates was investigated. It was found that the water vapor pressure during heat treatment had a strong influence on the flattening of the silica glass surface. The surface of the frosted glass changed into a transparent and lustrous surface after heat treatment with water vapor at 1200 deg. C for 48 h, whereas surface irregularities remained for heat treatment under a dry atmosphere. It was suggested that the difference in surface flattening was caused by changes in surface viscosity that depended on the concentration of OH groups on the surface. In order to quantitatively understand the effect of the heat treatment atmosphere, power spectral density (PSD) analysis and a novel peak and valley method were applied to the experimental results. From the PSD analysis, it was found that the Mullins' model could not explain the smoothing behavior by heat treatment. The peak and valley method, which could separate the surface morphology into the surface irregularities and the background undulation, revealed that the Mullins' model limitation was mainly for the surface and the background undulation could be understood within the model. These results indicate that there are different mechanisms between for the surface smoothing and for the relaxation of the background undulation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A short note on the accuracy of the discontinuous Galerkin method with reentrant faces

In this work, we study the convergence of the discontinuous Galerkin (DG) method applied to the advection–reaction equation on meshes with reentrant faces. On such meshes, the upwind numerical flux is not smooth, and so the numerical integration of the resulting face terms can only be expected to be first-order accurate. Despite this inexact integration, we prove that the DG method converges with order $\mathscr{O}$(h p+1/2 ), which is the same rate as in the case of exact integration. Consequently, specialized quadrature rules that accurately integrate the non-smooth numerical fluxes are not required for high-order accuracy. These results are numerically corroborated on examples of linear advection and discrete ordinates transport equations.

97 MATHEMATICS AND COMPUTING↗

Semi-analytic treatment of nearly-singular Galerkin surface integrals

On utilizing piecewise linear test and interpolation functions over flat triangles, three semi-analytic techniques for evaluating nearly-singular surface integrals of potential theory are developed and investigated in the context of a three-dimensional Galerkin approximation. In all procedures, the inner surface integral is calculated exactly via recursive expressions defined over the edges of the integration triangle. In addition, the proposed methods respectively employ a Duffy transformation, sinh transformations, and polynomial transformations to weaken or smooth out near singularities, followed by a standard product Gauss-Legendre quadrature rule to compute the outer boundary integral. Numerical experiments and comparisons of the proposed approaches are included to provide more insight into the performance of these techniques. Computational tests have demonstrated that the algorithm based on a Duffy transformation is the most efficient and effective method for dealing with nearly-singular as well as well-separated integrals.

99 GENERAL AND MISCELLANEOUS↗

A fully coupled two-level Schwarz preconditioner based on smoothed aggregation for the transient multigroup neutron diffusion equations

The neutron multigroup diffusion equations is an important approximation of the neutron transport equation, and has been widely used for studying the motion of neutrons and their interactions with the stationary background materials. Solving the multigroup diffusion equations faces challenging because many variables are coupled together and a lot of computing resources are required. In this paper, we focus on the development of a scalable parallel algorithm framework for the system of equations arising from the discretization of the multigroup diffusion equations using a finite element method in space and using an implicit scheme in time. The parallel agorithm framweork consists of an inexact Jacobian-free Newton for the nonlinear equations, a Krylov subspace method for the Jacobian system and a parallel Schwarz preconditioner for the acceleration of the algorithm convergence. A coarse space based on smoothed aggregation is introduced to construct a two-level method to improve the parallel performance of the Schwarz preconditioner. We numerically shown that compared with the one-level method, the proposed two-level method works significantly better in terms of the number of linear iterations and the compute time for a system of equations with millions of unknowns and a supercomputer with thousands of processors.

97 MATHEMATICS AND COMPUTING↗

The widths of classes of analytic functions in a disc

The precise values of several n-widths of the classes W{sup m}{sub p,R}({Psi}), 1{<=}p<{infinity}, m element of N, R{>=}1, in the Banach spaces L{sub p,{gamma}}and B{sub p,{gamma}}are calculated, where {gamma} is a weight. These are classes of analytic functions f in a disc of radius R whose mth derivatives f{sup (m)} belong to the Hardy space H{sub p,R} and whose angular boundary values have averaged moduli of smoothness of second order which are majorized by the fixed function {Psi} on the point set {l_brace}{pi}/(2k){r_brace}{sub ki} {sub sanelementof} {sub N}. For the classes W{sup m}{sub p,R}({Psi}) best linear methods of approximation in L{sub p,{gamma}}are developed. Extremal problems of related content are also considered. Bibliography: 37 titles.

97 MATHEMATICS AND COMPUTING↗

Fabrication of organic-inorganic perovskite thin films for planar solar cells via pulsed laser deposition

We report on fabrication of organic-inorganic perovskite thin films using a hybrid method consisting of pulsed laser deposition (PLD) of lead iodide and spin-coating of methylammonium iodide. Smooth and highly crystalline CH{sub 3}NH{sub 3}PbI{sub 3} thin films have been fabricated on silicon and glass coated substrates with fluorine doped tin oxide using this PLD-based hybrid method. Planar perovskite solar cells with an inverted structure have been successfully fabricated using the perovskite films. Because of its versatility, the PLD-based hybrid fabrication method not only provides an easy and precise control of the thickness of the perovskite thin films, but also offers a straightforward platform for studying the potential feasibility in using other metal halides and organic salts for formation of the organic-inorganic perovskite structure.

36 MATERIALS SCIENCE↗

Surface structure and electrical properties of solution processed lanthanum nickelate films

Conducting oxides with perovskite crystal structure have many advantages over the simple Pt or Au, Pt based metal bottom electrodes (BE), particularly in fabrication of ferroelectric as well as resistive random access memory devices, if they possess smooth surface morphology. LaNiO{sub 3} (LNO) thin films were prepared by modified chemical solution deposition method. Precursor solutions were spin coated onto SiO{sub 2}-substrates. Deposited layers were thermally treated in a pre-heated furnace at 550 °C and oxygenated up to 800 °C. Results of AFM and FESEM showed that films are very smooth (Ra = 1.69 nm), dense, crack-free and with monodispersed nanocrystallites. Growth conditions such as spinning rate, annealing rates and temperatures etc. have been optimized for mono dispersed crystallinity with very smooth surface morphology. Sheet resistivity, carrier concentration and RMS roughness were correlated with growth temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Advanced Validation Risk-Informed Approach for the Flooding Tool Based Upon Smooth Particle Hydrodynamics: Validation and Development Status of NEUTRINO

Risk-Informed validation is to focus advanced validation on high-priority and critical elements of the RISMC methods and tools that can best be addressed by this targeted approach to validation. Initial validation focus will be on the RISMC flooding analysis computer software based upon Smoothed Particle Hydrodynamics (SPH), NEUTRINO. The NEUTRINO code is a SPH-based CFD software adopted as one of the RISMC modeling tools for external hazards analysis. This document discusses the validation and development activities of NEUTRINO, especially in relation to its simulation capability for flooding hazards analysis. In order to draw meaningful conclusions from the discussion, we first analyzed the potential risks to nuclear power plants in flooding scenarios (e.g., hazard modes, industry/regulatory concerns, etc.). Then, an initial high-level PIRT was proposed to define the key phenomena relevant to the analysis of flooding hazards. Finally, based on the framework of this PIRT analysis, the validation and development efforts that have been conducted to date for NEUTRINO were discussed. This analysis helped to determine the sufficiency, efficiency, and adequacy of the current code development and validation efforts for NEUTRINO.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Optimization-based scatter estimation using primary modulation for computed tomography

Purpose: Scatter reduces the image quality in computed tomography (CT), but scatter correction remains a challenge. A previously proposed primary modulation method simultaneously obtains the primary and scatter in a single scan. However, separating the scatter and primary in primary modulation is challenging because it is an underdetermined problem. In this study, an optimization-based scatter estimation (OSE) algorithm is proposed to estimate and correct scatter. Methods: In the concept of primary modulation, the primary is modulated, but the scatter remains smooth by inserting a modulator between the x-ray source and the object. In the proposed algorithm, an objective function is designed for separating the scatter and primary. Prior knowledge is incorporated in the optimization-based framework to improve the accuracy of the estimation: (1) the primary is always positive; (2) the primary is locally smooth and the scatter is smooth; (3) the location of penumbra can be determined; and (4) the scatter-contaminated data provide knowledge about which part is smooth. Results: The simulation study shows that the edge-preserving weighting in OSE improves the estimation accuracy near the object boundary. Simulation study also demonstrates that OSE outperforms the two existing primary modulation algorithms for most regions of interest in terms of the CT number accuracy and noise. The proposed method was tested on a clinical cone beam CT, demonstrating that OSE corrects the scatter even when the modulator is not accurately registered. Conclusions: The proposed OSE algorithm improves the robustness and accuracy in scatter estimation and correction. This method is promising for scatter correction of various kinds of x-ray imaging modalities, such as x-ray radiography, cone beam CT, and the fourth-generation CT.

60 APPLIED LIFE SCIENCES↗

A New Class of Non-Linear, Finite-Volume Methods for Vlasov Simulation

Methods for the numerical discretization of the Vlasov equation should efficiently use the phase space discretization and should introduce only enough numerical dissipation to promote stability and control oscillations. A new high-order, non-linear, finite-volume algorithm for the Vlasov equation that discretely conserves particle number and controls oscillations is presented. The method is fourth-order in space and time in well-resolved regions, but smoothly reduces to a third-order upwind scheme as features become poorly resolved. The new scheme is applied to several standard problems for the Vlasov-Poisson system, and the results are compared with those from other finite-volume approaches, including an artificial viscosity scheme and the Piecewise Parabolic Method. It is shown that the new scheme is able to control oscillations while preserving a higher degree of fidelity of the solution than the other approaches.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GRADIENT INDEX SPHERES BY THE SEQUENTIAL ACCRETION OF GLASS POWDERS

The Department of Energy is seeking a method for fabricating mm-scale spheres having a refractive index that varies smoothly and continuously from the center to its surface [1]. The fabrication procedure must allow the creation of a range of index profiles. The spheres are to be optically transparent and have a refractive index differential greater than 0.2. The sphere materials can be either organic or inorganic and the fabrication technique must be capable of scaling to low cost production. Mo-Sci Corporation proposed to develop optical quality gradient refractive index (GRIN) glass spheres of millimeter scale (1 to 2 mm diameter) by the sequential accretion and consolidation of glass powders. Other techniques were also tested to make GRIN spheres as the powder-accretion method produced non-concentric layers and poor optical quality glass spheres. Potential ways to make the GRIN spheres were (1) by "coating" glass spheres (1 to 2 mm diameter) with molten glass in a two step process; and (2) by coating glass spheres with polymer layers.

99 GENERAL AND MISCELLANEOUS↗

Deep kernel methods learn better: from cards to process optimization

Abstract The ability of deep learning methods to perform classification and regression tasks relies heavily on their capacity to uncover manifolds in high-dimensional data spaces and project them into low-dimensional representation spaces. In this study, we investigate the structure and character of the manifolds generated by classical variational autoencoder (VAE) approaches and deep kernel learning (DKL). In the former case, the structure of the latent space is determined by the properties of the input data alone, while in the latter, the latent manifold forms as a result of an active learning process that balances the data distribution and target functionalities. We show that DKL with active learning can produce a more compact and smooth latent space which is more conducive to optimization compared to previously reported methods, such as the VAE. We demonstrate this behavior using a simple cards dataset and extend it to the optimization of domain-generated trajectories in physical systems. Our findings suggest that latent manifolds constructed through active learning have a more beneficial structure for optimization problems, especially in feature-rich target-poor scenarios that are common in domain sciences, such as materials synthesis, energy storage, and molecular discovery. The Jupyter Notebooks that encapsulate the complete analysis accompany the article.

97 MATHEMATICS AND COMPUTING↗

A Leray regularized ensemble-proper orthogonal decomposition method for parameterized convection-dominated flows

Abstract Partial differential equations (PDEs) are often dependent on input quantities that are uncertain. To quantify this uncertainty PDEs must be solved over a large ensemble of parameters. Even for a single realization this can be a computationally intensive process. In the case of flows governed by the Navier–Stokes equations, an efficient method has been devised for computing an ensemble of solutions. To further reduce the computational cost of this method, an ensemble-proper orthogonal decomposition (POD) method was recently proposed. The main contribution of this work is the introduction of POD spatial filtering for ensemble-POD methods. The POD spatial filter makes possible the construction of the Leray ensemble-POD model, which is a regularized-reduced order model for the numerical simulation of convection-dominated flows of moderate Reynolds number. The Leray ensemble-POD model employs the POD spatial filter to smooth (regularize) the convection term in the Navier–Stokes equations, and diminishes the numerical inaccuracies produced by the ensemble-POD method in the numerical simulation of convection-dominated flows. Specifically, for the numerical simulation of a convection-dominated two-dimensional flow between two offset cylinders, we show that the Leray ensemble-POD method better reflects the dynamics of the benchmark results than the ensemble-POD scheme. The second contribution of this work is a new numerical discretization of the variable viscosity ensemble algorithm in which the average viscosity is replaced with the maximum viscosity. It is shown that this new numerical discretization is significantly more stable than those in current use. Furthermore, error estimates for the novel Leray ensemble-POD algorithm with this new numerical discretization are also proven.

Mathematics↗

MPACVD growth of single crystalline diamond substrates with PCD rimless and expanding surfaces

Single crystal diamond (SCD) growth was performed in optimized pocket substrate holders at a high pressure (240 Torr) and a high power density (∼1000 W/cm3). In an effort to overcome the challenges of growing large area SCD substrates without a corresponding polycrystalline diamond (PCD) rim, a growth recipe using these pocket holders was developed. This growth recipe controls the substrate temperature (Ts) and the incident microwave power (Pinc) in a prescribed function of growth time. Through this process, the feasibility to enlarge the SCD substrate in situ, i.e., during the growth itself is shown. By allowing the temperature to increase from ∼980 °C to 1040 °C, then reducing the temperature, and then allowing it to drift up again, the deposition process alternates between the fast growth of the different crystal directions (i.e., 〈110〉, 〈111〉, and 〈100〉) and a slow growth to smoothen the top surface. This leads to an increased lateral SCD growth. The slow growth of the crystal faces in turn leads to a smooth and enlarged top surface. Certain strategies such as the termination of the growth process at the appropriate time are critical in obtaining flat and smooth SCD surfaces without the formation of any PCD rim. The SCD substrates grown via this method have been analyzed by optical and scanning electron microscopies. The lateral SCD surface area increased between 1.7 and 2 times greater than the initial seed surface area during one continuous run. The deposited SCDs have high growth rates of ∼30 μm/h resulting in smooth, flat and rimless substrates, hence indicating the improvement in the quality and morphology of the deposited substrates.

Nad, Shreya↗

First Experimental Test of the Ratio Method

The ratio is a new reaction observable suggested to extract accurately structure information on halo nuclei. It corresponds to the ratio of differential cross sections for scattering and breakup, which is predicted to remove the uncertainty related to the reaction dynamics. We present here the first experimental test of the method for the 11 Be + 12 C collision at E Lab = 20A MeV performed at Texas A&M University. Differential cross sections for scattering and inclusive one-neutron breakup have been measured with the new detector array BlueSTEAl. The ratio of cross sections is very smooth and independent of the projectile-target interaction, which demonstrates the validity of the ratio method. We extend our analysis to existing 11 Be + 208 Pb data, confirming that the method works well on any target.

11Be↗