SEARCH · Search NASA

Results for “Software interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Computer control of a robotic satellite servicer

The advantages that will accrue from the in-orbit servicing of satellites are listed. It is noted that in a concept in satellite servicing which holds promise as a compromise between the high flexibility and adaptability of manned vehicles and the lower cost of an unmanned vehicle involves an unmanned servicer carrying a remotely supervised robotic manipulator arm. Because of deficiencies in sensor technology, robot servicing would require that satellites be designed according to a modular concept. A description is given of the servicer simulation hardware, the computer and interface hardware, and the software. It is noted that several areas require further development; these include automated docking, modularization of satellite design, reliable connector and latching mechanisms, development of manipulators for space environments, and development of automated diagnostic techniques.

Fernandez, K. R.↗

NASA NTRS1982

Investigating tectonic and bathymetric features of the Indian Ocean using MAGSAT magnetic anomaly data

MAGSAT Investigator-B tapes were preprocessed by (1) removing all data points with obvious erroneous values and location errors; (2) removing smaller spikes (typically 15 nT or more), and deleting data tracks with fewer than 20 points; and (3) removing a linear trend from each track. The remaining data were recorded on tape for use by the equivalent source mapping (ESMAP) program which uses a least squares algorithm to fit the magnetization parameter of the grid of equivalent source dipoles in the crust to satellite data acquired at different times and locations. ESMAP was implemented on the TASC computing system and modified to read preprocessed MAGSAT tapes and interface with TASC plotting software. Some verification of the software was accomplished. Gridded 1-degree mean values of gravity anomaly and sea surface undulation computed from SEASAT radar altimeter were obtained and brought on line.

Lazarewicz, A. R.↗

NASA NTRS1981

Mission operations computing systems evolution

As part of its preparation for the operational Shuttle era, the Goddard Space Flight Center (GSFC) is currently replacing most of the mission operations computing complexes that have supported near-earth space missions since the late 1960's. Major associated systems include the Metric Data Facility (MDF) which preprocesses, stores, and forwards all near-earth satellite tracking data; the Orbit Computation System (OCS) which determines related production orbit and attitude information; the Flight Dynamics System (FDS) which formulates spacecraft attitude and orbit maneuvers; and the Command Management System (CMS) which handles mission planning, scheduling, and command generation and integration. Management issues and experiences for the resultant replacement process are driven by a wide range of possible future mission requirements, flight-critical system aspects, complex internal system interfaces, extensive existing applications software, and phasing to optimize systems evolution.

Kurzhals, P. R.↗

NASA NTRS1981

Feasibility study of the solar scientific instruments for Spacelab/Orbiter

The feasibility and economics of mounting and operating a set of solar scientific instruments in the backup Skylab Apollo Telescope Mount (ATM) hardware was evaluated. The instruments used as the study test payload and integrated into the ATM were: the Solar EUV Telescope/Spectrometer; the Solar Active Region Observing Telescope; and the Lyman Alpha White Light Coronagraph. The backup ATM hardware consists of a central cruciform structure, called the "SPAR', a "Sun End Canister' and a "Multiple Docking Adapter End Canister'. Basically, the ATM hardware and software provides a structural interface for the instruments; a closely controlled thermal environment; and a very accurate attitude and pointing control capability. The hardware is an identical set to the hardware that flow on Skylab.

Leritz, J.↗

NASA NTRS1984

OPTDES.BYU: An interactive optimization package with 2D/3D graphics

The use of the OPTDES.BYU package developed to assist the engineer in obtaining efficient designs is discussed. The package helps the engineer to perform the following fundamental tasks in the design process: (1) interfacing with existing analysis software; (2) defining and redefining the design problem; (3) searching for improved designs; and (4) interpreting results from the design process.

Balling, R. J.↗

NASA NTRS1986

The personal computer and GP-B management

The Gravity Probe-B (GP-B) experiment is one of the most sophisticated and challenging developments to be undertaken by NASA. Its objective is to measure the relativistic drift of gyroscopes in orbit about the earth. In this paper, the experiment is described, and the strategy of phased procurements for accomplishing the engineering development of the hardware is discussed. The microcomputer is a very convenient and powerful tool in the management of GP-B. It is used in creating and monitoring such project data as schedules, budgets, hardware procurements and technical and interface requirements. Commercially available software in word processing, database management, communications, spreadsheet, graphics and program management are used. Examples are described of the efficacy of the application of the computer by the management team.

Neighbors, A. K.↗

NASA NTRS1986

Event time recorder

Accurate timing of sounding rocket payload events is critical for successful missions. The payload event timers used must be checked numerous times to verify proper settings. A cost-effective time event recorder was developed which will store up to 32 time events and provide a hard copy printout. The event recorder consists of an AIM 65 microcomputer with a custom hardware interface and assembly language software. The 32 input lines can be triggered by voltage changes or current sensing.

Stuchlik, D. W.↗

NASA NTRS1990

Data-Acquisition Board For IBM PS/2 Computer

Circuit board containing microprocessors designed to control acquisition of data by IBM PS/2 computer. Plugged into one of 16-bit slots on mother board of computer. Controls transfer of data from as many as 48 discrete channels to Micro Channel Interface. With expansion of software, board recognizes and filters specified kinds of signal patterns, possibly to detect errors.

Hoang, Phuong-Dung T.↗

NASA NTRS1990

CCSDS - An approach to the definition of common standards for understanding space-related data

International cooperation for space data projects requires common data processing goals and unique data exchange mechanisms. The absence of standards has led to project unique interface definitions and special software on diverse systems. To address this problem, CCSDS Panel 2 is creating a set of standards to support self description of data using standard structures. The proposed standard data interchange mechanism - the Standard Formatted Data Unit (SFDU) - reduces information loss in data transfers, increases automated information exchange, and extends the lifetime of data. Data interchange structures, languages, and services are being developed with necessary control functions to provide these benefits. A set of recommendations for agency review has been issued this year to be the basis for future data exchange and to enhance access to older mission data sets. Space agencies and other space data handling facilities are being encouraged to implement the SFDU concept for ongoing and planned projects.

Drexler, Manfred↗

NASA NTRS1991

Advanced technologies for Mission Control Centers

Advance technologies for Mission Control Centers are presented in the form of the viewgraphs. The following subject areas are covered: technology needs; current technology efforts at GSFC (human-machine interface development, object oriented software development, expert systems, knowledge-based software engineering environments, and high performance VLSI telemetry systems); and test beds.

Dalton, John T.↗

NASA NTRS1991

Thermal Synthesizer System - An integrated approach to spacecraft thermal analysis

The Thermal Synthesizer System (TSS), which is being developed to meet the thermal analysis needs of Space Station Freedom and of the proposed Space Exploration Initiative missions, is examined. The key requirements and design goals to be met by TSS are summarized, and the software engineering and user interface design philosophy are reviewed. The basic architecture for all applications within TSS is described. An overview is given of the main features of each of the applications of TSS.

Panczak, Tim↗

NASA NTRS1992

Development of an Intelligent Hypertext Manual for the Space Shuttle Hazardous Gas Detection System

The Intelligent Hypertext Manual (IHM) for the Hazardous Gas Detection System (HGDS) of the Space Shuttle is described as an example of an integrated knowledge system. The IHM is described in terms of its design as a system for facilitating the interpretation of real-time data regarding hazardous gases and their successful and timely detection. Hypermedia technology is employed that incorporates text, video, and sound, and the architecture of the IHM integrated knowledge system is based on knowledge elements, a basic user interface, and integrated application software. Knowledge organization enhances the retrieval of documents for launch commit criteria, operations and maintenance requirements, flight-measurement location, and hypermedia incorporation. The integration of computer and AI technologies for the HGDS IHM demonstrates the potential for enhancing efficiency in aerospace operations with aerospace data that are easy to retrieve.

Lo, Ching F.↗

NASA NTRS1994

Voice and video transmission using XTP and FDDI

The use of Xpress Transfer Protocol (XTP) and Fiber Distributed Data Interface (FDDI) provides a high speed and high performance network solution to multimedia transmission that requires high bandwidth. FDDI is an ANSI and ISO standard for a MAC and physical layer protocol that provides a signaling rate of 100 Mbits/sec and fault tolerance. XTP is a transport and network layer protocol designed for high performance and efficiency and is the heart of the SAFENET Lightweight Suite for systems that require performance or realtime communications. The testbed consists of several commercially available Intel based i486 PC's containing off-the-shelf FDDI cards, audio analog-digital converter cards, video interface cards, and XTP software. Unicast, multicast, and duplex audio transmission experiments have been performed using XTP software. Unicast and multicast video transmission is in progress. Several potential commercial applications are described.

Drummond, John↗

NASA NTRS1994

Lyndon B. Johnson Space Center (JSC) proposed dual-use technology investment program in intelligent robots

This paper presents an overview of the proposed Lyndon B. Johnson Space Center (JSC) precompetitive, dual-use technology investment project in robotics. New robotic technology in advanced robots, which can recognize and respond to their environments and to spoken human supervision so as to perform a variety of combined mobility and manipulation tasks in various sectors, is an obejective of this work. In the U.S. economy, such robots offer the benefits of improved global competitiveness in a critical industrial sector; improved productivity by the end users of these robots; a growing robotics industry that produces jobs and profits; lower cost health care delivery with quality improvements; and, as these 'intelligent' robots become acceptable throughout society, an increase in the standard of living for everyone. In space, such robots will provide improved safety, reliability, and productivity as Space Station evolves, and will enable human space exploration (by human/robot teams). The proposed effort consists of partnerships between manufacturers, universities, and JSC to develop working production prototypes of these robots by leveraging current development by both sides. Currently targeted applications are in the manufacturing, health care, services, and construction sectors of the U.S. economy and in the inspection, servicing, maintenance, and repair aspects of space exploration. But the focus is on the generic software architecture and standardized interfaces for custom modules tailored for the various applications allowing end users to customize a robot as PC users customize PC's. Production prototypes would be completed in 5 years under this proposal.

Erikson, Jon D.↗

NASA NTRS1993

A SIMULINK environment for flight dynamics and control analysis: Application to the DHC-2 Beaver. Part 1: Implementation of a model library in SIMULINK. Part 2: Nonlinear analysis of the Beaver autopilot

The design of advanced Automatic Aircraft Control Systems (AACS's) can be improved upon considerably if the designer can access all models and tools required for control system design and analysis through a graphical user-interface, from within one software environment. This MSc-thesis presents the first step in the development of such an environment, which is currently being done at the Section for Stability and Control of Delft University of Technology, Faculty of Aerospace Engineering. The environment is implemented within the commercially available software package MATLAB/SIMULINK. The report consists of two parts. Part I gives a detailed description of the AACS design environment. The heart of this environment is formed by the SIMULINK implementation of a nonlinear aircraft model in block-diagram format. The model has been worked out for the old laboratory aircraft of the Faculty, the De Havilland DHC-2 'Beaver', but due to its modular structure, it can easily be adapted for other aircraft. Part I also describes MATLAB programs which can be applied for finding steady-state trimmed-flight conditions and for linearization of the aircraft model, and it shows how the built-in simulation routines of SIMULINK have been used for open-loop analysis of the aircraft dynamics. Apart from the implementation of the models and tools, a thorough treatment of the theoretical backgrounds is presented. Part II of this report presents a part of an autopilot design process for the 'Beaver' aircraft, which clearly demonstrates the power and flexibility of the AACS design environment from part I. Evaluations of all longitudinal and lateral control laws by means of nonlinear simulations are treated in detail. The AACS design environment from part I proved to be a very useful tool for designing the control laws of the 'Beaver' autopilot within a very tight time-schedule. The autopilot design process itself will be used as a guideline for future AACS research at the Faculty of Aerospace Engineering. Flight tests of the 'Beaver' autopilot, done after evaluating the control laws in the SIMULINK package, proved to be quite successful. In the future, the AACS design package will evolve into a standardized, integrated design environment which can be applied to virtually any type of aircraft. The AACS design cycle will be shortened further by developing tools for automatically porting control laws from the MATLAB/SIMULINK environment to a piloted real-time flight simulator and the Flight Control Computers of the aircraft.

Flight Control System Design↗

NASA NTRS1995

Flight dynamics software in a distributed network environment

As with all NASA facilities, the announcement of reduced budgets, reduced staffing, and the desire to implement smaller/quicker/cheaper missions has required the Agency's organizations to become more efficient in what they do. To accomplish these objectives, the FDD has initiated the development of the Flight Dynamics Distributed System (FDDS). The underlying philosophy of FDDS is to build an integrated system that breaks down the traditional barriers of attitude, mission planning, and navigation support software to provide a uniform approach to flight dynamics applications. Through the application of open systems concepts and state-of-the-art technologies, including object-oriented specification concepts, object-oriented software, and common user interface, communications, data management, and executive services, the FDD will reengineer most of its six million lines of code.

Jeletic, J.↗

NASA NTRS1990

SigmaCLIPSE = presentation management + NASA CLI PS + SQL

SigmaCLIPSE provides an expert systems and 'intelligent' data base development program for diverse systems integration environments that require support for automated reasoning and expert systems technology, presentation management, and access to 'intelligent' SQL data bases. The SigmaCLIPSE technology and and its integrated ability to access 4th generation application development and decision support tools through a portable SQL interface, comprises a sophisticated software development environment for solving knowledge engineering and expert systems development problems in information intensive commercial environments -- financial services, health care, and distributed process control -- where the expert system must be extendable -- a major architectural advantage of NASA CLIPS. SigmaCLIPSE is a research effort intended to test the viability of merging SQL data bases with expert systems technology.

Weiss, Bernard P., Jr.↗

NASA NTRS1994

Lyndon B. Johnson Space Center (JSC) proposed dual-use technology investment program in intelligent robotics

This paper presents an overview of the proposed Lyndon B. Johnson Space Center (JSC) precompetitive, dual-use technology investment project in robotics. New robotic technology in advanced robots, which can recognize and respond to their environments and to spoken human supervision so as to perform a variety of combined mobility and manipulation tasks in various sectors, is an objective of this work. In the U.S. economy, such robots offer the benefits of improved global competitiveness in a critical industrial sector; improved productivity by the end users of these robots; a growing robotics industry that produces jobs and profits; lower cost health care delivery with quality improvements; and, as these 'intelligent' robots become acceptable throughout society, an increase in the standard of living for everyone. In space, such robots will provide improved safety, reliability, and productivity as Space Station evolves, and will enable human space exploration (by human/robot teams). The proposed effort consists of partnerships between manufacturers, universities, and JSC to develop working production prototypes of these robots by leveraging current development by both sides. Currently targeted applications are in the manufacturing, health care, services, and construction sectors of the U.S. economy and in the inspection, servicing, maintenance, and repair aspects of space exploration. But the focus is on the generic software architecture and standardized interfaces for custom modules tailored for the various applications allowing end users to customize a robot as PC users customize PC's. Production prototypes would be completed in 5 years under this proposal.

Erickson, Jon D.↗