Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

An Investigation of Passive and Semi-Active Tuned Mass Dampers for a Tension Leg Platform Floating Offshore Wind Turbine in ULS Conditions

Offshore Wind Turbines (OWTs) are subjected to complex external loadings caused by combined wind and wave sources. The application of structural damping control techniques to OWTs using Tuned Mass Dampers (TMDs) has shown to be effective in reducing the integrated system loads and accelerations. In this work, the impact of passive and semi-active (S-A) TMD’s applied to both fixed-bottom (monopile) and floating (tension leg platform) OWTs are evaluated under the Fatigue Limit State (FLS) and Ultimate Limit State (ULS). Different S-A control logics like ON/OFF state damping based on the ground hook (GH) control policy are implemented, and the frequency response of each algorithm is investigated. It is shown that the performance of each algorithm varies according to the load conditions such as FLS (normal operation) and ULS (idling state). Fully-coupled time domain simulations are conducted through the developed simulation tool for structural control integrated into the high-fidelity wind turbine design code, FASTv8. Compared to the passive TMD, it is shown that a S-A TMD results in higher load reductions, as well as, smaller strokes under both FLS and ULS conditions. In FLS analysis, the S-A TMD using Displacement Based Ground Hook (DB-GH) control is capable of reducing the fore-aft and side-to-side damage equivalent loads for the monopile substructure by approximately 12 % and 64 %, respectively. The ultimate loads at the tower base for the floating substructure (TLP) are also reduced by 9% with S-A TMD followed by Inverse Velocity Based Ground Hook control (IVB-GH). The dynamic characteristics and practical feasibility of a magnetorheological (MR) damper (for S-A control) are also evaluated.

17 WIND ENERGY↗

Exploring Gradient-Based Multi-directional Controls in GANs

Generative Adversarial Networks (GANs) have been widely applied in modeling diverse image distributions. However, despite its impressive applications, the structure of the latent space in GANs largely remains as a black-box, leaving its controllable generation an open problem, especially when spurious correlations between different semantic attributes exist in the image distributions. To address this problem, previous methods typically learn linear directions or individual channels that control semantic attributes in the image space. However, they often suffer from imperfect disentanglement, or are unable to obtain multi-directional controls. Furthermore, in this work, in light of the above challenges, we propose a novel approach that discovers nonlinear controls, which enables multi-directional manipulation as well as effective disentanglement, based on gradient information in the learned GAN latent space. More specifically, we first learn interpolation directions by following the gradients from classification networks trained separately on the attributes, and then navigate the latent space by exclusively controlling channels activated for the target attribute in the learned directions. Empirically, with small training data, our approach is able to gain fine-grained controls over a diverse set of bi-directional and multi-directional attributes, and we showcase its ability to achieve disentanglement significantly better than state-of-the-art methods both qualitatively and quantitatively.

97 MATHEMATICS AND COMPUTING↗

The TMS Magnesium Committee: Committed to the Advancement of Global Magnesium Technology

The TMS Magnesium Committee was established in the year 2000 as a spin-off of the Reactive Metals Committee, triggered by the strong global growth of magnesium being used in a variety of structural lightweight applications since the mid-1990’s. Since then the committee has seen a distinct development in terms of size, participation and focus. The article at hand outlines this development by recapitulating the output of its two main activities: the annual Magnesium Technology Symposia and the JOM Special Issues dedicated to magnesium research and development. Further records on the Magnesium Committee are available from the committee homepage (accessible through http://members.tms.org).

36 MATERIALS SCIENCE↗

X-Ray Stereo Digital Image Correlation

Digital Image Correlation (DIC) is a well-established, non-contact diagnostic technique used to measure shape, displacement and strain of a solid specimen subjected to loading or deformation. Yet, measurements using standard DIC can have significant errors or be completely infeasible in challenging experiments, such as explosive, combustion, or fluid-structure interaction applications, where beam-steering due to index of refraction variation biases measurements or where the sample is engulfed in flames or soot. To address these challenges, we propose using X-ray imaging instead of visible light imaging for stereo-DIC, since refraction of X-rays is negligible in many situations, and X-rays can penetrate occluding material. Two techniques of creating an appropriate pattern for X-ray DIC are presented, both based on adding a dense material in a random speckle pattern on top of a less-dense specimen. A standard dot-calibration target is adapted for X-ray imaging, allowing the common bundle-adjustment calibration process in commercial stereo-DIC software to be used. High-quality X-ray images with sufficient signal-to-noise ratios for DIC are obtained for aluminum specimens with thickness up to 22.2 mm, with a speckle pattern thickness of only 80 μm of tantalum. The accuracy and precision of X-ray DIC measurements are verified through simultaneous optical and X-ray stereo-DIC measurements during rigid in-plane and out-of-plane translations, where errors in the X-ray DIC displacements were approximately 2–10 μm for applied displacements up to 20 mm. Finally, a vast reduction in measurement error—5–20 times reduction of displacement error and 2–3 times reduction of strain error—is demonstrated, by comparing X-ray and optical DIC when a hot plate induced a heterogeneous index of refraction field in the air between the specimen and the imaging systems. Subsequently, these findings show the feasibility of using X-ray-based stereo-DIC for non-contact measurements in exacting experimental conditions, where optical DIC cannot be used.

47 OTHER INSTRUMENTATION↗

Analysis of degradation in residential battery energy storage systems for rate-based use-cases

This article examines the impact of residential battery energy storage (BES) systems' operational modes on the life (i.e. usable energy capacity) of the battery under several climatic conditions and battery chemistries. The sharp increase in residential BES installations has been a result of decreasing costs of batteries, increase in rate structures motivated applications such as solar self-consumption and time-of-use energy management, and customers purchasing these systems for backup power. While these different modes of operations provide a combination of increased bill savings, reliability of supply, and energy sustainability to the customer, their operational characteristics vary significantly between use-cases. Functional life of BES systems is known to be strongly dependent on their operating conditions. In this article, we analyze the operation of residential BES systems under different rate-based use-cases, for different battery chemistries and cell designs, and under different environmental conditions. This is conducted by simulating the control of BES operations using rate-based cycling algorithms and analyzing the prognosis of multiple battery lifetime models that consider complex nonlinear dependencies of operational stress factors such as state-of-charge, depth-of-discharge, and temperature on degradation. Significant variations in battery life are observed owing to the differences in characteristics of the uses-cases coupled with environmental conditions and battery chemistries. Such differences lead to the conclusion that choice of residential BES technologies and chemistries should account for their intended use-cases.

25 ENERGY STORAGE↗

Recombinant proteins incorporating short non-native extensions may display increased aggregation propensity as detected by high resolution NMR spectroscopy

Highlights: Black-Right-Pointing-Pointer Bile acid binding proteins from different constructs retain structural integrity. Black-Right-Pointing-Pointer NMR {sup 15}N-T{sub 1} relaxation data of BABPs show differences if LVPR extension is present. Black-Right-Pointing-Pointer Deviations from a {sup 15}N-T{sub 1}/molecular-weight calibration curve indicate aggregation. -- Abstract: The use of a recombinant protein to investigate the function of the native molecule requires that the former be obtained with the same amino acid sequence as the template. However, in many cases few additional residues are artificially introduced for cloning or purification purposes, possibly resulting in altered physico-chemical properties that may escape routine characterization. For example, increased aggregation propensity without visible protein precipitation is hardly detected by most analytical techniques but its investigation may be of great importance for optimizing the yield of recombinant protein production in biotechnological and structural biology applications. In this work we show that bile acid binding proteins incorporating the common C-terminal LeuValProArg extension display different hydrodynamic properties from those of the corresponding molecules without such additional amino acids. The proteins were produced enriched in nitrogen-15 for analysis via heteronuclear NMR spectroscopy. Residue-specific spin relaxation rates were measured and related to rotational tumbling time and molecular size. While the native-like recombinant proteins show spin-relaxation rates in agreement with those expected for monomeric globular proteins of their mass, our data indicate the presence of larger adducts for samples of proteins with very short amino acid extensions. The used approach is proposed as a further screening method for the quality assessment of biotechnological protein products.

60 APPLIED LIFE SCIENCES↗

Tubular titanium oxide/reduced graphene oxide-sulfur composite for improved performance of lithium sulfur batteries

Lithium sulfur (LiS) batteries are promising alternatives to conventional Li-ion batteries in terms of specific capacity and energy. But, the technical challenges raised from the soluble polysulfide (PS) in organic electrolyte deter their implementation in practical applications. Nanoengineered structure and chemical adsorptive materials hold great promise in mitigating the PS migration problem. We develop a tubular titanium oxide (TiO 2 )/reduced graphene oxide (rGO) composite structure (TG) as a sulfur hosting material for constructing better performed LiS batteries. The TG/sulfur cathode (TG/S) is able to deliver ~1200 mAh g -1 specific capacity with stable operation for over 550 cycles. Moreover, the TG/S composite cathode shows stable Coulombic efficiencies of over ~95% at various C rates, which are ~10% higher than those of the rGO/sulfur (G/S) counterparts. The superior electrochemical performances of TG/S could be ascribed to the synergistic effects between the conductive rGO support and the physically/chemically absorptive TiO 2 , that is, the spatial tubular structure of TiO 2 provides intimate contact and physical confinement for sulfur, while the polar TiO 2 in TG/S shows strong chemical interaction towards the sulfur species.

25 ENERGY STORAGE↗

High and temperature-insensitive piezoelectric performance in the lead-free Sm-doped BiFeO 3 –BaTiO 3 ceramics with high Curie temperature

Large sensor piezoelectric constant (d 33 = 334 pC/N) and superior actuator piezoelectric constant (d 33 * = 552 pm/V) as well as a high Curie temperature (T C = 454 °C) were obtained simultaneously in the lead-free 0.67Bi 1.03 FeO 3 -0.33Ba 1-x Sm x TiO 3 ceramics. Such an excellent and temperature-insensitive piezoelectric performance with only 10% temperature variation of piezoelectric strain at the range of 25–125 °C is highly desirable for real applications. The structural origin of the enhanced piezoelectric performance is mainly attributed to the morphotropic phase boundary and the highest known tetragonality (c T /a T = 1.02) in such materials. Transmission electron microscopy and electro-mechanical phenomenological theory demonstrate that the superior d 33 and d 33 * are associated with the hybrids nanodomains (60–90 nm) and flattened thermodynamic energy profile owing to the local structure heterogeneity. Furthermore, these results are superior as the piezoelectric properties are temperature-independent and the material has large d 33 *, and high TC compared to other lead-free piezoelectric ceramics.

36 MATERIALS SCIENCE↗

Hydrogen and water interactions with CrMnFeCoNi alloy from density functional theory calculations

High entropy alloys (HEAs) are a promising class of materials with remarkable mechanical and catalytic properties. Among these, the quinary CrMnFeCoNi alloy (also called “Cantor alloy”) has attracted considerable attention given its thermodynamic stability and remarkable mechanical properties under different temperatures. Given that various degradation mechanisms involve multiple contaminants, such as hydrogen and water in hydrogen embrittlement and surface poisoning, respectively, understanding their interactions with the Cantor alloy is critical for its practical applications as structural, nuclear, or hydrogen storage material. In this work, we perform first-principles calculations based on Density Functional Theory (DFT) to investigate such interactions when considering various microstructures, including bulk materials and those containing certain defects, such as grain boundaries, stacking faults, and vacancies. We also employ Global Sensitivity Analysis to identify the importance of different factors in the stability of the impurities. We find that the accuracy of the H formation energy is significantly affected by spin polarization and chemical short-range order. The study also identifies a strong tendency for hydrogen interstitials to segregate to Σ5(210)/[001] symmetric tilt grain boundary, even when H concentrations are high, suggesting that a certain type of grain boundaries acts as H sinks within the alloy. Further, this result is reinforced by the low formation energy of vacancy-hydrogen complexes, which can contain multiple hydrogen atoms. Finally, the surface reactivity analysis reveals that the adsorption energy of oxygen and hydroxyl groups is highly sensitive to the specific metal atom involved in the binding, with a clear preference for chromium atoms, which could have implications for the alloy’s oxidation and corrosion behavior.

36 MATERIALS SCIENCE↗

Bio-inspired interfaces for easy-to-recycle lithium-ion batteries

The recycling of spent lithium-ion batteries has significant potential to benefit our society economically and environmentally as well as preserving raw materials. Although diverse process chains have been applied or under development to recycle batteries, a common, critical issue for battery recycling is the separation of the metallic current collector from the composite film of the electrode. In this study, inspired by the amazing controllable attachment and detachment ability of geckos’ foot-hairs, microscale near-surface architecture is designed on the interface between the current collector and the composite film in lithium-ion batteries, so that it displays controllable and directional adhesion, i.e., enhanced adhesion can be obtained during its lifetime to cope with the substantial volume changes of the composite film upon intercalation and deintercalation, whereas during recycling, the composite layer of the electrode can be easily peeled off from the current collector in a certain direction. We report this study is the first application of structural adhesives for the development of easy-to-recycle lithium-ion batteries. This technology can also be extended to other electronic products to avoid an ever-growing volume of electronic waste. The fundamental understanding on the interfacial adhesion and delamination mechanisms provides a scientific footing for the realization of next-generation easy-to-recycle electronics.

25 ENERGY STORAGE↗

Bayesian model updating with finite element vs surrogate models: Application to a miter gate structural system

Bayesian finite element (FE) model updating using direct model evaluations of large-scale high-fidelity FE models is extremely computationally expensive. Surrogate models can be used as fast emulators of FE models to accelerate the model calibration process. The physics/mechanics-based FE models are still the underpinning behind the surrogate models. Here, this paper evaluates the loss in accuracy and the gain in computational time while performing Bayesian model updating by using surrogate model evaluations compared to using direct FE model evaluations. This evaluation is crucial before entirely relying on surrogate models in model updating for structural health monitoring (SHM) and damage prognosis (DP) purposes. This paper also demonstrates Bayesian updating and surrogate model construction of large-scale high-fidelity FE models of infrastructure systems. In this regard, the miter gate structural system is considered as the testbed structure. Three predominant damage modes (loss of contact between gate and wall, loss of thickness due to corrosion, and loss of tension in the diagonal rods) are considered for model updating purposes. Bayesian model updating is performed using direct FE evaluations by leveraging parallel computing. Two types of surrogates, namely polynomial chaos expansion (PCE) and Gaussian process regression (GPR), are developed for the miter gate. Model updating is performed again using the trained surrogate models, and the updating results are compared with their counterparts obtained using the direct FE evaluation results. The posterior distribution of the FE model parameters obtained using the trained surrogates are sufficiently accurate with respect to the posterior obtained utilizing the direct FE evaluations. In addition, an approximate 4-fold decrease in the computational time was observed when using surrogate model evaluations instead of direct FE evaluations for model updating.

42 ENGINEERING↗

Ballistic-diffusive phonon transport in cellulose nanocrystals by ReaxFF molecular dynamics simulations

Cellulose nanocrystals (CNCs), a ubiquitous nano-sized natural biopolymer, have drawn considerable attention in recent years due to their excellent mechanical and chemical properties. However, thermal properties of CNCs, which are critical for their potential applications as structural or functional materials, are less investigated. In this work, their thermal properties were systematically studied by molecular dynamics (MD) simulations in terms of the effects of polymorphs, size, temperature, and strain. It was found that the thermal conductivities depend on the polymorphs of CNCs, but the thermal conductance of unit chain of each polymorph is similar. Moreover, the strong dependence of the thermal conductivities of CNCs on their length and cross-sectional area indicates the existence of remarkable ballistic-diffusive phonon transport. Single chain CNCs can achieve a thermal conductivity of ~6 W/(m∙K), implying their potential as high thermal conductive polymer. The mechanical strain can enhance the alignment of cellulose skeleton, which reduces phonon scattering and thus increases thermal conductivity. Possible underlying mechanism of the varying thermal conductivity was further discussed and attributed to the shift of phonon frequencies and varied degree of orientation. This study reveals the sophisticated ballistic-diffusive phonon transport in CNCs, and pave path to future design of CNC-based materials with desirable thermal properties.

42 ENGINEERING↗

Theoretical study of the electronic, thermodynamic, and thermo-conductive properties of y-LiAlO2 with 6Li isotope substitutions for tritium production

Lithium aluminate has attracted researchers’ interests due to its wide applications. The structural, electronic, optical, lattice phonon thermodynamic, and thermo-conductive properties of ?-LiAlO2 with 6Li-isotope substitution are investigated by density functional theory and lattice phonon dynamics. The calculated results show that ?-LiAlO2 possesses a wide band-gap of 4.63 eV. The valence band is mainly formed by p orbitals of Li, O, and Al. The calculated lattice thermal conductivity of ?-LiAlO2 is found to be in good agreement over a wide range of temperatures with the available experimental data. The calculated dielectric matrix shows anisotropic behavior along z and x (or y) axes. Due to the wide band-gap, the optical conductivity of ?-LiAlO2 is mainly contributed from the electron hopping between valence-conduction bands. Substitution of 7Li with 6Li isotope in ?-LiAlO2 leads to observable differences in the lattice phonon frequencies at higher frequencies (>8THz) and to slight changes in corresponding thermal conductivity and the infrared and Raman spectra which are in good agreement with the measured data. The relevance of these properties for tritium production through 6Li absorbing neutron in nuclear reactors is discussed.

ab initio thermodynamics, ?-LiAlO2 and 6Li-isotope↗