Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural Lifetime”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Effect of the link lifetime in a dynamical lattice on the properties of the avalanche processes on it

The properties of the avalanche processes that develop on a dynamical lattice, the structure of links in which changes due to a specific characteristic of each lattice node, namely, its “activity,” which determines the probability of connection of a certain node with neighboring nodes in one step of lattice evolution. The statistics of the sizes of the avalanches appearing in the lattice system is studied as a function of the node activity and the link lifetime (the lifetime of the links formed in the system). It is analytically and numerically shows that the type of avalanche dynamics in the system changes as a function of these parameters. The following three regimes can take place in the system: (1) avalanches of any sizes, from small to catastrophic, can appear, which is reflected in the power-law behavior of the probability density function of the appearance of avalanches of certain sizes; (2) avalanches of a certain average size mainly appear in the system, and the probability density is close to that of a normal distribution; and (3) transient regime, where the probability density function of the appearance of avalanches of certain sizes is close to an exponential function. These results open up the possibilities of controlling the behavior of a complex system; in particular, they can be used to prevent catastrophic avalanches by changing the link lifetime and the average node activity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Different to the core: The pre-supernova structures of massive single and binary-stripped stars

The majority of massive stars live in binary or multiple systems and will interact with a companion during their lifetimes, which helps to explain the observed diversity of core-collapse supernovae. Donor stars in binary systems can lose most of their hydrogen-rich envelopes through mass transfer. As a result, not only are the surface properties affected, but so is the core structure. However, most calculations of the core-collapse properties of massive stars rely on single-star models. We present a systematic study of the difference between the pre-supernova structures of single stars and stars of the same initial mass (11–21 M ⊙ ) that have been stripped due to stable post-main-sequence mass transfer at solar metallicity. We present the pre-supernova core composition with novel diagrams that give an intuitive representation of the isotope distribution. As shown in previous studies, at the edge of the carbon-oxygen core, the binary-stripped star models contain an extended gradient of carbon, oxygen, and neon. This layer remains until core collapse and is more extended in mass for higher initial stellar masses. It originates from the receding of the convective helium core during core helium burning in binary-stripped stars, which does not occur in single-star models. We find that this same evolutionary phase leads to systematic differences in the final density and nuclear energy generation profiles. Binary-stripped star models have systematically higher total masses of carbon at the moment of core collapse compared to single-star models, which likely results in systematically different supernova yields. In about half of our models, the silicon-burning and oxygen-rich layers merge after core silicon burning. We discuss the implications of our findings for the “explodability”, supernova observations, and nucleosynthesis of these stars. Our models are publicly available and can be readily used as input for detailed supernova simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

Synchrotron small-angle X-ray scattering technique for battery electrode study

Structure dependent stability is a concern for the achievement of high energy density electrode with long cycling lifetime, especially for alloying-type and conversion-type anodes. Substantial alterations in volume upon discharge-discharge process leads to particle pulverization and continuous consumption of electrolyte. Moreover, the nucleation and growth mechanism of Li 2 O and Li 2 S, which determines the rate performance of Li-O 2 and Li-S batteries, are still understudy. Microstructure characterization techniques have been applied to disclose the structural changes of active material at different charge/discharge states. Synchrotron small-angle X-ray scattering (SAXS) attracts considerable attention because of the high flux, high time resolution and nondestructive characteristics. In addition, SAXS patterns provide statistics structural information of electrode at micrometer scale. The commonly used coin cell with punched holes simplifies the application of in situ/operando SAXS measurement. Here, this review discusses the research about the SAXS technique in the characterization of electrode in different batteries.

25 ENERGY STORAGE↗

Restricted Photoinduced Conformational Change in the Cu(I) Complex for Sensing Mechanical Properties

When designing photoresponsive materials, the effect of a polymer host matrix on the photophysical and photochemical properties of chromophores can be dramatic and advantageous for correlating macromolecular properties. Some compounds possess changes in their photophysical response with variation in the surrounding media (e.g., crystalline glass vs solution). This study illustrates how changes in the excited state dynamics of [Cu(dmp) 2 ] + , where dmp = 2,9-dimethyl-1,10-phenanthroline, are used to quantitatively probe the viscosity of the surrounding polymer matrix. A correlation of both excited state lifetime and photoluminescence emission wavelength on viscosity was observed in different supramolecular materials containing [Cu(dmp) 2 ] + . These effects were attributed to restricted photoinduced structural distortion of the Cu(I) complex as the polymer matrix hardened. This photoluminescence sensor features a greater dynamic range for viscosity sensing (6 orders of magnitude) and displayed larger changes in lifetime response with respect to typical organometallic mechanosensitive probes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lifetime measurements in the even-even Cd 102 – 108 isotopes

The heaviest T z = 0 doubly-magic nucleus, Sn 100 , and the neighboring nuclei offer unique opportunities to investigate the properties of nuclear interaction. For instance, the structure of light-Sn nuclei has been shown to be affected by the delicate balance between nuclear-interaction components, such as pairing and quadrupole correlations. From Cd to Te, many common features and phenomena have been observed experimentally along the isotopic chains, leading to theoretical studies devoted to a more general and comprehensive study of the region. In this context, having only two proton holes in the Z = 50 shell, the Cd isotopes are expected to present properties similar to those found in the Sn isotopic chain. The aim of this work was to measure lifetimes of excited states in neutron-deficient nuclei in the vicinity of Sn 100 . Here, the neutron-deficient nuclei in the N ≈ Z ≈ 50 region were populated using a multinucleon transfer reaction with a Cd 106 beam and a Mo 92 target. The beamlike products were identified by the VAMOS + + spectrometer, while the γ rays were detected using the AGATA array. Lifetimes of excited states were determined using the recoil distance Doppler-shift method, employing the Cologne differential plunger. Lifetimes of low-lying states were measured in the even-mass Cd 102 – 108 isotopes. In particular, multiple states with excitation energy up to ≈ 3 MeV, belonging to various bands, were populated in Cd 106 via inelastic scattering. The transition strengths corresponding to the measured lifetimes were compared with those resulting from state-of-the-art beyond-mean-field calculations using the symmetry-conserving configuration-mixing approach. Conclusions: Despite the similarities in the electromagnetic properties of the low-lying states, there is a fundamental structural difference between the ground-state bands in the Z = 48 and Z = 50 isotopes. The comparison between experimental and theoretical results revealed a rotational character of the Cd nuclei, which have prolate-deformed ground states with β 2 ≈ 0.2 . At this deformation Z = 48 becomes a closed-shell configuration, which is favored with respect to the spherical one.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nonadiabatic molecular dynamics analysis of hybrid Dion–Jacobson 2D leads iodide perovskites

The past six years have witnessed the rapid growth of interest in Dion–Jacobson (DJ) phase two-dimensional (2D) hybrid halide perovskites as optoelectronic materials with considerable intrinsic stability. The precise relationships between structural variations and the resulting charge carrier dynamics at finite temperature in these materials are keys to practical applications and are not yet completely understood. Here, we study 3-(aminomethyl) piperidinium (3AMP) and 4-(aminomethyl) piperidinium (4AMP) spacer cation-based lead iodide DJ phase systems and find these spacer cations to have a profound impact on the structural dynamics. Particularly, large conformational dynamics of the 3AMP-based perovskite compared to that of the 4AMP at room temperature leads to pronounced state energy fluctuation near band edges and further results in a shorter quantum coherence. The faster quantum decoherence of the 3AMP spacer-based perovskite underpins a longer nonradiative lifetime, offering insight into its superior performance as an optoelectronic material. This work sheds light on the relationship between structural fluctuations and charge carrier dynamics that can help in designing 2D perovskites with superior photophysical properties.

Wang, Ying (ORCID:0000000349048227)↗

Contribution of advanced fluorescence nano microscopy towards revealing mitotic chromosome structure

The organization of chromatin into higherorder structures and its condensation process represent one of the key challenges in structural biology. This is important for elucidating several disease states. To address this long-standing problem, development of advanced imaging methods has played an essential role in providing understanding into mitotic chromosome structure and compaction. Amongst these are two fast evolving fluorescence imaging technologies, specifically fluorescence lifetime imaging (FLIM) and superresolution microscopy (SRM). FLIM in particular has been lacking in the application of chromosome research while SRM has been successfully applied although not widely. Furthermore, both these techniques are capable of providing fluorescence imaging with nanometer information. SRM or "nanoscopy" is capable of generating images of DNA with less than 50 nm resolution while FLIM when coupled with energy transfer may provide less than 20 nm information. Here, we discuss the advantages and limitations of both methods followed by their contribution to mitotic chromosome studies. Furthermore, we highlight the future prospects of how advancements in new technologies can contribute in the field of chromosome science.

59 BASIC BIOLOGICAL SCIENCES↗

Complete correlation studies of two-proton decays: 6Be and 45Fe

The complete three-body correlation pictures are experimentally reconstructed for the two-proton decays of the 6Be and 45Fe ground states. We are able to see qualitative similarities and differences between these decays. They demonstrate very good agreement with the predictions of a theoretical three-body cluster model. Validity of the theoretical methods for treatment of the three-body Coulombic decays of this class is thus established by the broad range of lifetimes and nuclear masses spanned by these cases. Implementations for decay dynamics and nuclear structure of 2p emitters are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Probing Chemical Bonding in Uranium Dioxide by Means of High-Resolution X-ray Absorption Spectroscopy

Here, a systematic X-ray absorption study at the U 3d, 4d, and 4f edges of UO 2 was performed, and the data were analyzed within framework of the Anderson impurity model. By applying the high-energy-resolution fluorescence-detection (HERFD) mode of X-ray absorption spectroscopy (XAS) at the U 3d 3/2 edge and conducting the XAS measurements at the shallower U 4f levels, fine details of the XAS spectra were resolved resulting from reduced core-hole lifetime broadening. This multiedge study enabled a far more effective analysis of the electronic structure at the U sites and characterization of the chemical bonding and degree of the 5f localization in UO 2 . The results support the covalent character of UO 2 and do not agree with the suggestions of rather ionic bonding in this compound as expressed in some publications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Cation-Tethered Flowable Polymeric Interface for Enabling Stable Deposition of Metallic Lithium

A fundamental challenge, shared across many energy storage devices, is the complexity of electrochemistry at the electrode–electrolyte interfaces that impacts the Coulombic efficiency, operational rate capability, and lifetime. Specifically, in energy-dense lithium metal batteries, the charging/discharging process results in structural heterogeneities of the metal anode, leading to battery failure by short-circuit and capacity fade. In this work, we take advantage of organic cations with lower reduction potential than lithium to build an electrically responsive polymer interface that not only adapts to morphological perturbations during electrodeposition and stripping but also modulates the lithium ion migration pathways to eliminate surface roughening. As a result, we find that this concept can enable prolonging the long-term cycling of a high-voltage lithium metal battery by at least twofold compared to bare lithium metal.

25 ENERGY STORAGE↗

Grooved electrodes for high-power-density fuel cells

Proton exchange membrane fuel cells (PEMFCs) are leading candidates to decarbonize the transport sector, but widespread deployment will require improvements in lifetime, fuel economy and cost. Here we present the grooved electrode, an alternative electrode structure that enhances PEMFC performance and durability by coupling high ionomer (ion-conducting binder) content for improved H + transport with grooves for rapid O 2 transport. Grooved electrodes provide up to 50% higher performance than state-of-the-art conventional electrodes under standard operating conditions. Fuel cell diagnostics combined with multiphysics modelling demonstrate that grooved electrodes provide facile O 2 transport despite their high ionomer content, enabling improved reaction rate uniformity. Grooved electrodes also provide improved durability, with less performance loss after carbon corrosion compared with baseline electrodes. Machine learning analysis demonstrates the potential to further optimize grooved structures for next-generation PEMFCs with enhanced performance and durability, enabling smaller and cheaper fuel cell stacks with higher fuel efficiency.

25 ENERGY STORAGE↗

DPUNS--A Differential-Plunger For Lifetime Measurements Of Tagged Exotic/Unbound Nuclear States

This contribution focused on research to measure the lifetimes of unbound nuclear states using a differential-plunger technique combined with recoil-proton decay tagging. The results of the first lifetime measurements of unbound states in the spherical proton emitter, {sup 109}I, were discussed along with the limits to the technique. In order to proceed further, a new differential-plunger device, DPUNS, has been designed and is currently being built at the University of Manchester. DPUNS has been optimised to work with the GREAT/RITU/TDR setup at the University of Jyvaeskylae and the status of the new device is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hydride assisted synthesis of the high temperature thermoelectric phase: Yb14MgSb11

Yb14MnSb11 is a p-type high temperature thermoelectric material that has been shown to have a peak zT of 1.3 at 1273 K and stable lifetime testing at that temperature for over 1500 h by NASA. Yb14MgSb11 is a structural analog, but the highest temperature thermoelectric properties have not yet been reported. Yb14MgSb11 has been prepared in an environmentally friendly route employing metal hydrides to provide phase pure samples with excellent control of stoichiometry. We present a comparative study employing either MgH2 or YbH2 as a reactive precursor that also facilitates milling of the elements. High purity compositions are synthesized, and their high temperature thermoelectric properties were measured on dense pellets. Temperature-dependent thermoelectric properties were measured from 300 to 1273 K. Yb14MgSb11 exhibited a peak zT = 1.2 at 1273 K due to an appreciable power factor and low-lattice thermal conductivity. Carrier concentration and hall mobility were also measured from 300 to 1275 K and ranged from 5.3 × 1020 to 1.3 × 1021 cm−3 and from 4.7 to 0.7 cm2 V−1 S−1, respectively.

Justl, Andrew P. (ORCID:0000000163324545)↗

Interactions between nonfullerene acceptors lead to unstable ternary organic photovoltaic cells

For organic photovoltaic (OPV) devices to achieve consistent performance and long operational lifetimes, organic semiconductors must be processed with precise control over their purity, composition, and structure. This is particularly important for high volume solar cell manufacturing where control of materials quality has a direct impact on yield and cost. Ternary-blend OPVs containing two acceptor–donor–acceptor (A–D–A)-type nonfullerene acceptors (NFAs) and a donor have proven to be an effective strategy to improve solar spectral coverage and reduce energy losses beyond that of binary-blend OPVs. Here, we show that the purity of such a ternary is compromised during blending to form a homogeneously mixed bulk heterojunction thin film. We find that the impurities originate from end-capping C=C/C=C exchange reactions of A–D–A-type NFAs, and that their presence influences both device reproducibility and long-term reliability. The end-capping exchange results in generation of up to four impurity constituents with strong dipolar character that interfere with the photoinduced charge transfer process, leading to reduced charge generation efficiency, morphological instabilities, and an increased vulnerability to photodegradation. As a consequence, the OPV efficiency falls to less than 65% of its initial value within 265 h when exposed to up to 10 suns intensity illumination. We propose potential molecular design strategies critical to enhancing the reproducibility as well as reliability of ternary OPVs by avoiding end-capping reactions.

14 SOLAR ENERGY↗

Nonlocal correlations in iron pnictides and chalcogenides

Deviations of low-energy electronic structurse of iron-based superconductors from density-functional-theory predictions have been parametrized in terms of band- and orbital-dependent mass renormalizations and energy shifts. The former have typically been described in terms of a local self-energy within the framework of dynamical mean field theory, while the latter appears to require nonlocal effects due to interband scattering. By calculating the renormalized band structure in both random phase approximation (RPA) and the two-particle self-consistent approximation (TPSC), we show that correlations in pnictide systems like LaFeAsO and LiFeAs can be described rather well by a nonlocal self-energy. In particular, Fermi pocket shrinkage as seen in experiments occurs due to repulsive interband finite-energy scattering. For the canonical iron chalcogenide system FeSe in its bulk tetragonal phase, the situation is, however, more complex since even including momentum-dependent band renormalizations cannot explain experimental findings. We propose that the nearest-neighbor Coulomb interaction may play an important role in band-structure renormalization in FeSe. Finally, we further compare our evaluations of nonlocal quasiparticle scattering lifetime within RPA and TPSC with experimental data for LiFeAs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New constraints on the Al 25 ( p , γ ) reaction and its influence on the flux of cosmic γ rays from classical nova explosions

The astrophysical 25 Al(p,γ) 26 Si reaction represents one of the key remaining uncertainties in accurately modeling the abundance of radiogenic 26 Al ejected from classical novae. Specifically, the strengths of key proton-unbound resonances in 26 Si, that govern the rate of the 25 Al(p,γ) reaction under explosive astrophysical conditions, remain unsettled. Here, we present a detailed spectroscopy study of the 26 Si mirror nucleus 26 Mg. We have measured the lifetime of the 3 + , 6.125-MeV state in 26 Mg to be 19(3) fs and provide compelling evidence for the existence of a 1 – state in the T = 1, A = 26 system, indicating a previously unaccounted for ℓ = 1 resonance in the 25 Al(p,γ) reaction. Using the presently measured lifetime, together with the assumption that the likely 1 – state corresponds to a resonance in the 25 Al + p system at 435.7(53) keV, we find considerable differences in the 25 Al(p,γ) reaction rate compared to previous works. Furthermore, based on current nova models, we estimate that classical novae may be responsible for up to ≈ 15% of the observed galactic abundance of 26 Al.

20 ≤ A ≤ 38↗

High-Performance and Traditional Multicrystalline Silicon: Comparing Gettering Responses and Lifetime-Limiting Defects

In recent years, high-performance multicrystalline silicon (HPMC-Si) has emerged as an attractive alternative to traditional ingot-based multicrystalline silicon (mc-Si), with a similar cost structure but improved cell performance. Herein, we evaluate the gettering response of traditional mc-Si and HPMC-Si. Microanalytical techniques demonstrate that HPMC-Si and mc-Si share similar lifetime-limiting defect types but have different relative concentrations and distributions. HPMC-Si shows a substantial lifetime improvement after P-gettering compared with mc-Si, chiefly because of lower area fraction of dislocation-rich clusters. In both materials, the dislocation clusters and grain boundaries were associated with relatively higher interstitial iron point-defect concentrations after diffusion, which is suggestive of dissolving metal-impurity precipitates. The relatively fewer dislocation clusters in HPMC-Si are shown to exhibit similar characteristics to those found in mc-Si. Given similar governing principles, a proxy to determine relative recombination activity of dislocation clusters developed for mc-Si is successfully transferred to HPMC-Si.

14 SOLAR ENERGY↗