Search NASA⌕ Search

SEARCH · Search NASA

Results for “System Identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

LDR structural technology activities at JPL

The status of the Large Deployable Reflector (LDR) technology requirements and the availability of that technology in the next few years are summarized. The research efforts at JPL related to these technology needs are also discussed. LDR requires that a large and relatively stiff truss-type backup structure have a surface accurate to 100 microns in space (initial position with thermal distortions) and the dynamic characteristics predictable and/or measurable by on-orbit system identification for micron level motion. This motion may result from the excitation of the lower modes or from wave-type motions. It is also assumed that the LDR structure can be ground tested to validate its ability to meet mission requirements. No program manager will commit a structural design based solely on analysis, unless the analysis is backed by a validation test program.

Wada, Ben↗
NASA NTRS1989

LACE flight dynamics experiment

The Low Power Atmospheric Compensation Experiment (LACE) is scheduled for launch in late 1989 into a 556 km altitude circular orbit of 43 deg inclination. The LACE flight dynamics experiment is an experiment secondary to the primary LACE mission. The purpose of the experiment is to provide on-orbit systems identification of the LACE spacecraft. The structure of the LACE spacecraft is of special interest to the CSI community. It incorporates 3 deployable/retractable booms of maximum length 45.72 m (150 ft) mounted on a rectangular parallelepiped bus of mass 1,200 kg. The zenith directed gravity gradient boom is mounted on the top of the bus; the retroreflector boom is mounted forward and deployed along the velocity vector, the balance boom is mounted and pointed aft. Attitude stabilization is accomplished by means of gravity gradient torques and by a momentum wheel. The LACE flight dynamics experiment is designed to measure modal frequencies, damping ratios, and oscillation amplitudes of the LACE spacecraft, as well as the vibration intensity generated by boom deployments and retractions. It is anticipated that this experiment will provide an opportunity for improvements in the accuracy of computer simulations of flexible structures and multibody dynamics.

Fisher, Shalom↗
NASA NTRS1989

CSI technology validation on an LSS ground experiment facility

The test bed developed at JPL for experimental evaluation of new technologies for the control of large flexible space structures is described. The experiment consists of a flexible spacecraft dynamic simulator, sensors, actuators, a microcomputer, and an advanced programming environment. The test bed has been operational for over a year, and thus far nine experiments were completed or are currently in progress. Several of these experiments were reported at the 1987 CSI conference, and several recent ones are documented in this paper, including high order adaptive control, non-parametric system identification, and mu-synthesis robust control. An aggressive program of experiments is planned for the forseeable future.

Wang, S. J.↗
NASA NTRS1989

In-house experiments in large space structures at the Air Force Wright Aeronautical Laboratories Flight Dynamics Laboratory

The Flight Dynamics Laboratory is committed to an in-house, experimental investigation of several technical areas critical to the dynamic performance of future Air Force large space structures. The advanced beam experiment was successfully completed and provided much experience in the implementation of active control approaches on real hardware. A series of experiments is under way in evaluating ground test methods on the 12 meter trusses with significant passive damping. Ground simulated zero-g response data from the undamped truss will be compared directly with true zero-g flight test data. The performance of several leading active control approaches will be measured and compared on one of the trusses in the presence of significant passive damping. In the future, the PACOSS dynamic test article will be set up as a test bed for the evaluation of system identification and control techniques on a complex, representative structure with high modal density and significant passive damping.

Gordon, Robert W.↗
NASA NTRS1990

Robustness, generality and efficiency of optimization algorithms in practical applications

The theoretical foundations of two approaches, sequential quadratic programming (SQP) and optimality criteria (OC), are analyzed and compared, with emphasis on the critical importance of parameters such as accuracy, generality, robustness, efficiency, and ease of use in large scale structural optimization. A simplified fighter wing and active control of space structures are considered with other example problems. When applied to general system identification problems, the OC methods are shown to lose simplicity and demonstrate lack of generality, accuracy and robustness. It is concluded that the SQP method with a potential constraint strategy is a better choice as compared to the currently prevalent mathematical programming and OC approaches.

Thanedar, P. B.↗
NASA NTRS1990

Modeling Selective Availability of the NAVSTAR Global Positioning System

As the development of the NAVSTAR Global Positioning System (GPS) continues, there will increasingly be the need for a software centered signal model. This model must accurately generate the observed pseudorange which would typically be encountered. The observed pseudorange varies from the true geometric (slant) range due to range measurement errors. Errors in range measurement stem from a variety of hardware and environment factors. These errors are classified as either deterministic or random and, where appropriate, their models are summarized. Of particular interest is the model for Selective Availability which is derived from actual GPS data. The procedure for the determination of this model, known as the System Identification Theory, is briefly outlined. The synthesis of these error sources into the final signal model is given along with simulation results.

Braasch, Michael↗
NASA NTRS1989

Tethered gravity laboratories study

Information on the Tethered Gravity Laboratory on the International Space Station is given in viewgraph form. Topics covered include active control, low gravity processes identification, systems analysis, tether interfaces with the Laboratory, elevator and payload configurations, elevator subsystems, and accelerometer technology requirements.

Lucchetti, F.↗
NASA NTRS1990

Adaptive structures in space

Future NASA missions will need large (20 to 100m) structural systems with precision position (few microns to submicron) requirements. Data are presented which indicate the technology deficiencies of previous programs and analyses in current state-of-the-art structural design approaches, analytical prediction capabilities, control of structure capabilities, and ground test technologies to meet the performance requirements of future large precision structural systems. Test results on laboratory truss structures that demonstrate static displacement control, active damping, and on-orbit system identification are described. It is shown that for large precision structures, adaptive structures provide not only a means to achieve the precision and characteristics required in space, but can also significantly alleviate the ground test requirements for flight-validating the hardware.

Wada, B. K.↗
NASA NTRS1990

Structural control sensors for CASES

The Remote Attitude Measurement Sensor (RAMS) is currently baselined to meet two important sensor needs for CASES (Control, Astrophysics and Structures Experiment in Space). First, as a tip displacement sensor, RAMS is designed to provide accurate knowledge of the position and orientation of the boom tip assembly. Secondly, as a boom motion tracker, it is designed to monitor 43 reflective targets which are distributed along the length of the boom and provide displacment information for post facto processing. The design and operation of RAMS as these two types of sesnors are described, and attention is given to how RAMS interfaces with the CASES closed-loop control system and how systems identification is accommodated.

Davis, Hugh W.↗
NASA NTRS1991

A signal model for GPS

As the development of GPS continues, there will be an increasing need for a software-centered signal model. This model must accurately generate the observed pseudorange that would typically be encountered. The observed pseudorange varies from the true geometric range because of range measurement errors, which stem from a variety of hardware and environmental factors. In this paper, these errors are classified as either deterministic or random, and, where appropriate, their models are summarized. Of particular interest is the model for Selective Availability, which was derived from actual GPS data. The procedure for determination of this model, known as system identification theory, is briefly outlined. The synthesis of these error sources into the final signal model is given, along with simulation results.

Braasch, Michael S.↗
NASA NTRS1991

NASA/MSFC Large Space Structures Ground Test Facility

This paper describes the NASA/MSFC Large Space Structures Ground Test Facility (LSS GTF) which has been developed for the purpose of implementing, testing, and evaluating LSS control and system identification techniques on representative large space structures. The facility presently consists of two laboratories: the Single Structure Control (SSC) Laboratory, which has been operational since 1984, and the Controls and Structures Experiment in Space (CASES) GTF which is presently under development. Test results from several experiments in the SSC laboratory are presented. The results of component testing and boom modal tests are presented for the CASES facility.

Jones, Victoria L.↗
NASA NTRS1991

Joint University Program for Air Transportation Research, 1990-1991

The goals of this program are consistent with the interests of both NASA and the FAA in furthering the safety and efficiency of the National Airspace System. Research carried out at the Massachusetts Institute of Technology (MIT), Ohio University, and Princeton University are covered. Topics studied include passive infrared ice detection for helicopters, the cockpit display of hazardous windshear information, fault detection and isolation for multisensor navigation systems, neural networks for aircraft system identification, and intelligent failure tolerant control.

Morrell, Frederick R.↗
NASA NTRS1992

A simplified dynamic model of the T700 turboshaft engine

A simplified open-loop dynamic model of the T700 turboshaft engine, valid within the normal operating range of the engine, is developed. This model is obtained by linking linear state space models obtained at different engine operating points. Each linear model is developed from a detailed nonlinear engine simulation using a multivariable system identification and realization method. The simplified model may be used with a model-based real time diagnostic scheme for fault detection and diagnostics, as well as for open loop engine dynamics studies and closed loop control analysis utilizing a user generated control law.

Duyar, Ahmet↗
NASA NTRS1992

Nonlinear stability and control study of highly maneuverable high performance aircraft, phase 2

This research should lead to the development of new nonlinear methodologies for the adaptive control and stability analysis of high angle-of-attack aircraft such as the F18 (HARV). The emphasis has been on nonlinear adaptive control, but associated model development, system identification, stability analysis and simulation is performed in some detail as well. Various models under investigation for different purposes are summarized in tabular form. Models and simulation for the longitudinal dynamics have been developed for all types except the nonlinear ordinary differential equation model. Briefly, studies completed indicate that nonlinear adaptive control can outperform linear adaptive control for rapid maneuvers with large changes in alpha. The transient responses are compared where the desired alpha varies from 5 degrees to 60 degrees to 30 degrees and back to 5 degrees in all about 16 sec. Here, the horizontal stabilator is the only control used with an assumed first-order linear actuator with a 1/30 sec time constant.

Mohler, R. R.↗
NASA NTRS1991

A linear programming approach to characterizing norm bounded uncertainty from experimental data

The linear programming spectral overbounding and factorization (LPSOF) algorithm, an algorithm for finding a minimum phase transfer function of specified order whose magnitude tightly overbounds a specified nonparametric function of frequency, is introduced. This method has direct application to transforming nonparametric uncertainty bounds (available from system identification experiments) into parametric representations required for modern robust control design software (i.e., a minimum-phase transfer function multiplied by a norm-bounded perturbation).

Scheid, R. E.↗
NASA NTRS1992

Preliminary structural control results from the Middeck Active Control Experiment (MACE)

Results are presented of on-going closed-loop ground experiments on the MACE test article, the objective of which is to investigate the extent to which closed-loop behavior of flexible spacecraft in zero gravity can be predicted, as well as to examine orbit system identification and control reconfiguration. The MACE hardware consists of three torque wheels, a two-axis gimballing payload, inertial sensors, and a flexible support structure. With the acquisition of a second payload, this is to represent a multiple payload platform with significant structural flexibility. When linear quadratic Gaussian control is used, payload pointing accuracy is improved by an order of magnitude when disturbed by a broadband torque disturbance. The successes and failures of the design and implementation process are discussed.

Miller, David W.↗