Search NASA⌕ Search

SEARCH · Search NASA

Results for “Timing spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Reversible solid oxide cells: Early performance and microstructural evolution during electrolysis and switched mode operation

Incorporating more renewables into our energy mix will require a diversity of technological solutions. Reversible solid oxide cell systems (RSOCs) operating reversibly between fuel cell and electrolysis modes with high round-trip efficiencies offer one such solution. However, questions remain about the stability of the oxygen and fuel electrodes under reversible operation. Here, in this study, single cells with the configuration Ni-YSZ|YSZ|GDC10|NNO-NDC50|NNO are operated by reversible cycling under potentiostatic conditions. Test conditions are chosen to be representative of average stack conditions that are likely to be encountered during operation of a stack constructed of such cells. The results of reversible cycling over 500 h (21 cycles) are compared with operating the cells under potentiostatic conditions in the electrolysis-only mode (i.e., without cycling). Voltage-current density (DC), AC complex impedance spectroscopy, distribution of relaxation times (DRT) analysis, and scanning electron microscopy (SEM) indicate excellent reversibility and stability of the neodymium nickelate-based oxygen electrodes in both electrolysis and reversible cycling modes. Degradation behavior is attributed to the loss and coarsening of connected Ni particles in the fuel electrode, particularly in the active layer. However, reversible operation mitigates this degradation compared to operation in the electrolysis-only (SOEC-only) mode.

25 ENERGY STORAGE↗
DOE OSTI2021

A study on the creep behavior of alloy 709 using in-situ scanning electron microscopy

In this research, an experimental evaluation of creep properties of Alloy 709 in the temperature range of 750–850 °C was undertaken. Alloy 709 is a novel austenitic stainless steel with 20% Cr and 25% Ni by wt% that was developed for application in structural components of nuclear power plants. Creep rupture tests were conducted in an in-situ heating-loading and Scanning Electron Microscope (SEM) unit equipped with Electron Backscatter Diffraction (EBSD) detector and Energy Dispersive Spectroscopy (EDS). “Real-time” creep damage mechanisms of Alloy 709 at various stresses and temperatures using a flat, un-notched sample with continuously reducing cross-section is studied so that the failure and maximum creep damage occurred at the center of the sample where the in-situ SEM imaging could be focused. Accelerated creep tests at temperatures and stresses above service conditions were performed by employing multiple blocks of constant loads where the loads were increased once the sample attained constant creep rate, indicating a secondary creep regime. This technique ensures multiple data points can be obtained from the same test, saves the time required for an otherwise long-term creep test and usage of SEM. Further, Coincident Site Lattice (CSL) boundary maps were collected as control maps before testing, and the grain boundaries were observed during the creep test to understand the effect of grain boundary character on the creep damage mechanism. Void growth, grain boundary separation, and sliding were found to be the main creep mechanisms whose rate is dependent on stress and temperature. Failure mechanisms studied on the fracture surface using SEM fractography were correlated to the sample surface observations to create complementary information to better understand the underline creep mechanism of Alloy 709.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Contrasting Effects of Catecholate and Hydroxamate Siderophores on Molybdenite Dissolution

Molybdenum (Mo) is essential for many enzymes but is often sequestered within minerals, rendering it not readily bioavailable. Metallophores, metabolites secreted by microorganisms and plants, promote mineral dissolution to increase metal bioavailability. However, interactions between metallophores and Mo-bearing minerals remain unclear. Here, in this study, catecholate protochelin and hydroxamate desferrioxamine B (DFOB) were utilized to examine their effects on dissolution of the common Mo-bearing mineral, molybdenite (MoS 2 ), under both oxic and anoxic conditions. Protochelin promoted molybdenite dissolution under oxic conditions with the formation of MoO 3 on the surface and Mo-siderophore complexes in solution. This was attributed to air-oxidation of both molybdenite and protochelin, as evidenced by lack of dissolution under anoxic conditions but enhanced dissolution by either pre-oxidized protochelin or pre-oxidized molybdenite. Liquid chromatography-mass spectroscopy (LC-MS), X-ray photoelectron spectroscopy (XPS), and Time-of-flight secondary ion mass spectrometry (ToF-SIMS) analyses revealed degradation of protochelin and adsorptions of its byproducts on molybdenite surface to promote dissolution. Conversely, DFOB inhibited molybdenite dissolution under both oxic and anoxic conditions, likely attributed to surface adsorption of DFOB and its weak complexation with Mo(VI) at the circumneutral pH. This work highlights the need to consider the balance between promoting and inhibitory effects of different metallophores on Mo-mineral dissolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Dynamic Heterogeneity and Kovacs’ Memory Effects in Supercooled Water

Understanding the properties of supercooled water is important for developing a comprehensive theory for liquid water and amorphous ices. Because of rapid crystallization for deeply supercooled water, experiments on it are typically carried out under conditions in which the temperature and/or pressure are rapidly changing. As a result, information on the structural relaxation kinetics of supercooled water as it approaches (metastable) equilibrium is useful for interpreting results obtained in this experimentally challenging region of phase space. Here, we used infrared spectroscopy and the fast time resolution obtained by transiently heating nanoscale water films to investigate relaxation kinetics (aging) in supercooled water. When the structural relaxation of the water films was followed using a temperature jump protocol analogous to the classic experiments of Kovacs, similar memory effects were observed. In particular, after suitable aging at one temperature, water’s structure displayed an extremum versus the number of heat pulses upon changing to a second temperature before eventually relaxing to a steady-state structure characteristic of that temperature. A random double well model based on the idea of dynamic heterogeneity in supercooled water accounts for the observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mechanistic Investigations of Gas-Phase Catalytic Hydrogenation in Metal–Organic Frameworks: Cooperative Activity of the Metal and Linker Sites in Cu x Rh 3– x (BTC) 2

We report the Cu x Rh 3–x (BTC) 2 catalyst (abbreviated CuRhBTC, BTC 3– = benzene tricarboxylate) provides excellent dispersion of active metal sites coupled with well-defined, robust structures for propylene hydrogenation reactions. This material therefore serves as a unique prototype for understanding catalytic activity in metal organic frameworks (MOFs). The mechanism of gas-phase hydrogenation at the bimetallic metal nodes of a MOF has been investigated in detail for the first time using in situ spectroscopy and diffraction experiments combined with density functional theory (DFT) calculations. The reaction occurs via a cooperative process in which the metal and linker sites play complementary roles; specifically, H 2 is dissociated at a Rh 2+ site with a missing Rh–O bond, while protonation of the decoordinated carboxylate linker stabilizes the active sites and promotes H 2 dissociation. In situ X-ray diffraction experiments show that the crystalline structure of the MOF is retained under reaction conditions at 20–100 °C. In situ Raman spectroscopy and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments demonstrate that propylene adsorbs at both Rh 2+ and Cu 2+ sites via π bonding. Cu 2+ is catalytically inactive, but at Rh 2+ sites, a propyl intermediate is observed when H 2 is introduced into the propylene feed. Furthermore, the appearance of the O–H stretch of COOH at ~3690 cm –1 in the DRIFT spectra is characteristic of defects consisting of missing Rh–O bonds. These experimental results are in general agreement with a reaction mechanism proposed by DFT, in which the decoordinated carboxylate linker is protonated, and the active Rh 2+ site remains available for readsorption of reactants in the subsequent catalytic cycle.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Many-Exciton Quantum Dynamics in a Ruddlesden–Popper Tin Iodide

We present a study on the many-body exciton interactions in a Ruddlesden–Popper tin halide, namely, (PEA) 2 SnI 4 (PEA = phenylethylammonium), using coherent two-dimensional electronic spectroscopy. The optical dephasing times of the third-order polarization observed in these systems are determined by exciton many-body interactions and lattice fluctuations. We investigate the excitation-induced dephasing (EID) and observe a significant reduction of the dephasing time with increasing excitation density as compared to its lead counterpart (PEA) 2 PbI 4 , which we have previously reported in a separate publication [J. Chem. Phys. 2020, 153, 164706]. Surprisingly, we find that the EID interaction parameter is four orders of magnitude higher in (PEA) 2 SnI 4 than that in (PEA) 2 PbI 4 . This increase in the EID rate may be due to exciton localization arising from a more statically disordered lattice in the tin derivative. This is supported by the observation of multiple closely spaced exciton states and the broadening of the linewidth with increasing population time (spectral diffusion), which suggests a static disordered structure relative to the highly dynamic lead-halide. Additionally, we find that the exciton nonlinear coherent lineshape shows evidence of a biexcitonic state with low binding energy (<10 meV) not observed in the lead system. We model the lineshapes based on a stochastic scattering theory that accounts for the interaction with a nonstationary population of dark background excitations. Our study provides evidence of differences in the exciton quantum dynamics between tin- and lead-based Ruddlesden–Popper metal halides (RPMHs) and links them to the exciton–exciton interaction strength and the static disorder aspect of the crystalline structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Exploiting Machine Learning to Efficiently Predict Multidimensional Optical Spectra in Complex Environments

The excited-state dynamics of chromophores in complex environments determine a range of vital biological and energy capture processes. Time-resolved, multidimensional optical spectroscopies provide a key tool to investigate these processes. Although theory has the potential to decode these spectra in terms of the electronic and atomistic dynamics, the need for large numbers of excited-state electronic structure calculations severely limits first-principles predictions of multidimensional optical spectra for chromophores in the condensed phase. In this work, we leverage the locality of chromophore excitations to develop machine learning models to predict the excited-state energy gap of chromophores in complex environments for efficiently constructing linear and multidimensional optical spectra. By analyzing the performance of these models, which span a hierarchy of physical approximations, across a range of chromophore–environment interaction strengths, we provide strategies for the construction of machine learning models that greatly accelerate the calculation of multidimensional optical spectra from first principles.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Immobilization of Cyanines in DNA Produces Systematic Increases in Fluorescence Intensity

Cyanines are useful fluorophores for a myriad of biological labeling applications, but their interactions with biomolecules are unpredictable. Cyanine fluorescence intensity can be highly variable due to complex photoisomerization kinetics, which are exceedingly sensitive to the surrounding environment. This introduces large errors in Förster resonance energy transfer (FRET)-based experiments where fluorescence intensity is the output parameter. However, this environmental sensitivity is a strength from a biological sensing point of view if specific relationships between biomolecular structure and cyanine photophysics can be identified. We describe a set of DNA structures that modulate cyanine fluorescence intensity through the insertion of adenine or thymine bases. These structures simultaneously provide photophysical predictability and tunability. We characterize these structures using steady-state fluorescence measurements, fluorescence correlation spectroscopy (FCS), and time-resolved photoluminescence (TRPL). Here, we find that the photoisomerization rate decreases over an order of magnitude across the adenine series, which is consistent with increasing immobilization of the cyanine moiety by the surrounding DNA structure.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Signatures of Antisymmetric Vibrations in the Ultrafast Dynamics of Quadrupolar Dyes

Antisymmetric molecular vibrations are central to ultrafast, nonadiabatic photophysical and photochemical processes such as conical intersection dynamics, Herzberg–Teller couplings and, potentially, singlet fission. Direct spectroscopic identification of such vibrations is, however, challenging, since they are typically Raman inactive and affect optical transitions only weakly. Here, we report experimental signatures of vibronic couplings to a high-frequency antisymmetric vibration in the excited state dynamics of a quasi-quadrupolar molecule by ultrafast two-dimensional electronic spectroscopy (2DES). The early time, sub-50 fs 2DES maps reveal an asymmetric peak pattern with characteristic low-energy cross-peaks. We show that these peaks arise from stimulated emission transitions from an anharmonic, double-minimum excited state potential energy surface formed by vibronic coupling to a high-frequency antisymmetric mode. Simulations based on a phenomenological essential state model support the results. Our findings offer a new approach for identifying antisymmetric vibrations in ultrafast 2DES and track excited state wavepacket motion before relaxation washes out the spectra.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Revealing Hot and Long-Lived Metastable Spin States in the Photoinduced Switching of Solvated Metallogrid Complexes with Femtosecond Optical and X-ray Spectroscopies

An atomistic understanding of the photoinduced spin-state switching (PSS) within polynuclear systems of d 4 –d 7 transition metal ion complexes is required for their rational integration into light-driven reactions of chemical and biological interest. However, in contrast to mononuclear systems, the multidimensional dynamics of the PSS in solvated molecular arrays have not yet been elucidated due to the expected complications associated with the connectivity between the metal centers and the strong interactions with the surroundings. Herein, the PSS in a solvated triiron(II) metallogrid complex is characterized using transient optical absorption and X-ray emission spectroscopies on the femtosecond time scale. The complementary measurements reveal the photoinduced creation of energy-rich (hot) and long-lived quintet states, whose dynamics differ critically from their mononuclear congeners. We report this finding opens major prospects for developing novel schemes in solution-phase spin chemistry that are driven by the dynamic PSS process in compact oligometallic arrays.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Low-Frequency Oscillations in Optical Measurements of Metal-Nanoparticle Vibrations

Time-resolved optical measurements of vibrating metal nanoparticles have been used extensively to probe the ultrafast mechanical properties of the nanoparticles and of the surrounding liquid, but nearly all investigations so far have been limited to the linear regime. Herein, we report the observation of a low-frequency oscillating signal in transient-absorption measurements of nanoparticles with octahedral gold cores and cubic silver shells; the signal appears at the difference of two mechanical vibrational frequencies in the particles, suggesting a nonlinear mixing process. We tentatively attribute this proposed mixing to a nonlinear coupling between a vibrational mode of the nanoparticle and its optical-frequency plasmon resonance. The optimization of this nonlinear transduction may enable high-efficiency opto-mechanical frequency mixing in the GHz-THz frequency regime.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

More Than 30 000-fold Field Enhancement of Terahertz Nanoresonators Enabled by Rapid Inverse Design

The rapid development of 6G communications using terahertz (THz) electromagnetic waves has created a demand for highly sensitive THz nanoresonators capable of detecting these waves. Among the potential candidates, THz nanogap loop arrays show promising characteristics but require significant computational resources for accurate simulation. This requirement arises because their unit cells are 10 times smaller than millimeter wavelengths, with nanogap regions that are 1 000 000 times smaller. To address this challenge, we propose a rapid inverse design method using physics-informed machine learning, employing double deep Q-learning with an analytical model of the THz nanogap loop array. In ~39 h on a middle-level personal computer, our approach identifies the optimal structure through 200 000 iterations, achieving an experimental electric field enhancement of 32 000 at 0.2 THz, 300% stronger than prior results. In conclusion, our analytical model-based approach significantly reduces the amount of computational resources required, offering a practical alternative to numerical simulation-based inverse design for THz nanodevices.

21 terahertz time-domain spectroscopy↗
DOE OSTI2023

Structural and Chemical Evolution of an Inverse CeO x /Cu Catalyst under CO 2 Hydrogenation: Tunning Oxide Morphology to Improve Activity and Selectivity

Small nanoparticles of ceria deposited on a powder of CuO display a very high selectivity for the production of methanol via CO 2 hydrogenation. CeO 2 /CuO catalysts with ceria loadings of 5%, 20%, and 50% were investigated. Among these, the system with 5% CeO x showed the best catalytic performance at temperatures between 200 and 350 °C. The evolution of this system under reaction conditions was studied using a combination of environmental transmission electron microscopy (E-TEM), in situ X-ray absorption spectroscopy (XAS), and time-resolved X-ray diffraction (TR-XRD). For 5% CeO x /Cu, the in situ studies pointed to a full conversion of CuO into metallic copper, with a complete transformation of Ce 4+ into Ce 3+ . Images from E-TEM showed drastic changes in the morphology of the catalyst when it was exposed to H 2 , CO 2 , and CO 2 /H 2 mixtures. Under a CO 2 /H 2 feed, there was a redispersion of the ceria particles that was detected by E-TEM and in situ TR-XRD. Finally, these morphological changes were made possible by the inverse oxide/metal configuration and facilitate the binding and selective conversion of CO 2 to methanol.

03 NATURAL GAS↗
DOE OSTI2025

Sparge Sampling of Molten Salts for Online Monitoring via Laser-Induced Breakdown Spectroscopy

A method was developed to sample molten salts by sparging to generate and transport aerosols to an isolated instrument for compositional analysis by laser-induced breakdown spectroscopy (LIBS). Real-time monitoring of molten salt composition is critical to developing molten salt nuclear reactors, which offer enhanced safety and efficiency. In this article, the sparge sampling method is described and compared with sampling using a Collison nebulizer. The size distribution and transport of aerosols produced from molten eutectic NaNO 3 –KNO 3 salt were compared for multiple gas flow rates (75–1200 mL min –1 ) and transport distances (0.68–2.61 m). Both methods produced aerosols ranging from 0.5 to 5.0 μm determined using a cascade impactor. Aerosols were effectively transported without pre- or trace-heating of gas lines, but transport efficiency was reduced by the formation of agglomerates. Sparge sampling was found to use less sample and less gas than a Collison nebulizer while producing a more concentrated aerosol stream (up to 5 μg L –1 ). The effects of laser energy and delay time on the signal quality of LIBS measurements of these aerosols were also studied. High energy and short delay times were found to enhance signal and repeatability, whereas signal-to-background and signal-to-noise ratios were highest at low energy and longer delay times. The capabilities of this system for online monitoring of molten salts were demonstrated with calibrations for Sr and Li with relative standard deviations of 2.6% and 1.5% and limits of detection of 380 and 180 μg g –1 , respectively.

Aerosols↗
DOE OSTI2025

Tuning the Lifetimes of Photoinduced Deligation in a Metal–Organic Framework via Linker Functionalization

Recently photoinduced dynamic ligation in a metal–organic frameworks (MOFs) was reported, where a long-lived charge-transfer excited state (ca. 30 μs) featuring partial dissociation between the carboxylate linker and metal-based node was probed by time-resolved infrared (TRIR) spectroscopy. The study offers a new mechanistic perspective to evaluate the potential contribution from the excited state molecular configuration to the performance of MOF photocatalysts. In this work, by employing MIL-101(Fe) as the study platform, we have further explored the influence of intramolecular interactions on the stability of relevant excited states and demonstrated the effective tuning of their lifetimes through the incorporation of different functional groups into the system. The correlations between the varied excited state lifetimes and coordination configurations with specific functional groups (−NH 2 or −NO 2 ) was inferred from the analyses of infrared spectroscopic data and theoretical calculations, revealing the essential role of the intramolecular interactions (i.e., between the added functional groups and the carboxylate group) in the modulation of system energetics. Overall, the work presents a pathway to tune the excited state dynamics and expands the knowledge regarding the photoinduced dynamic ligation in carboxylate-based MOFs.

excited states↗
DOE OSTI2026

Photoluminescent Cu(I) HETPHENs Featuring Bulky Alkyl-Substituted Phenanthrolines

Successful excited-state-enhancing substituent effect strategies applied in homoleptic Cu(I) metal-to-ligand charge transfer (MLCT) chromophores have been adapted to the heteroleptic phenanthroline (HETPHEN) platform, leveraging 2,9-mesityl-1,10-phenanthroline (mesPhen) in conjunction with a series of seven distinct 2,9- and 2,3,4,7,8,9-substituted phenanthrolines. The newly conceived CuHETPHEN complexes feature MLCT lifetimes ranging from 62 to 443 ns, all of which exhibit unprecedented room-temperature photoluminescence and demonstrate quantitative adherence to the energy gap law. TD-DFT calculations successfully modeled the systematic variation in electronic transition intensities, accounting for the experimentally observed UV–vis absorption bands across the entire series of molecules while providing detailed structural explanations for the variations in spectral profiles. These heteroleptic Cu(I) diimine chromophores exhibit thermally activated delayed fluorescence (TADF), with delayed fluorescence occurring between closely spaced 1 MLCT and 3 MLCT excited manifolds, having energetic separations of ΔE = 713–1009 cm –1 , as demonstrated here for the first time. Nanosecond and ultrafast transient absorption spectroscopy verified the MLCT nature of these excited states and extracted the time constants for the initial pseudo-Jahn–Teller distortion and intersystem crossing throughout the entire series of molecules. Lastly, the triplet photosensitization properties of these Cu(I) HETPHENs are demonstrated in a number of model photochemical transformations.

Chromophores↗
DOE OSTI2020

Ultrafast photoinduced band splitting and carrier dynamics in chiral tellurium nanosheets

Trigonal tellurium (Te) is a chiral semiconductor that lacks both mirror and inversion symmetries, resulting in complex band structures with Weyl crossings and unique spin textures. Detailed time-resolved polarized reflectance spectroscopy is used to investigate its band structure and carrier dynamics. The polarized transient spectra reveal optical transitions between the uppermost spin-split H4 and H5 and the degenerate H6 valence bands (VB) and the lowest degenerate H6 conduction band (CB) as well as a higher energy transition at the Lpoint. Surprisingly, the degeneracy of the H6 CB (a proposed Weyl node) is lifted and the spin-split VB gap is reduced upon photoexcitation before relaxing to equilibrium as the carriers decay. Using ab initio density functional theory (DFT) calculations, we conclude that the dynamic band structure is caused by a photoinduced shear strain in the Te film that breaks the screw symmetry of the crystal. The band-edge anisotropy is also reflected in the hot carrier decay rate, which is a factor of two slower along the c-axis than perpendicular to it. The majority of photoexcited carriers near the band-edge are seen to recombine within 30 ps while higher lying transitions observed near 1.2 eV appear to have substantially longer lifetimes, potentially due to contributions of intervalley processes in the recombination rate. These new findings shed light on the strong correlation between photoinduced carriers and electronic structure in anisotropic crystals, which opens a potential pathway for designing novel Te-based devices that take advantage of the topological structures as well as strong spin-related properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Observation of a massive phason in a charge-density-wave insulator

The lowest-lying fundamental excitation of an incommensurate charge density wave (CDW) material is widely believed to be a massless phason -- a collective modulation of the phase of the CDW order parameter. However, as first pointed out by Lee and Fukuyama, long-range Coulomb interactions should push the phason energy up to the plasma energy of the CDW condensate, resulting in a massive phason and a fully gapped spectrum. Whether such behavior occurs in a CDW system has been unresolved for more than four decades. Using time-domain THz emission spectroscopy, we investigate this issue in the material (TaSe 4 ) 2 I, a classical example of a quasi-one-dimensional CDW insulator. Upon transient photoexcitation at low temperatures, we find the material strikingly emits coherent, narrow-band THz radiation. The frequency, polarization and temperature-dependence of the emitted radiation imply the existence of a phason that acquires mass by coupling to long-range Coulomb interaction. Our observations constitute the first direct evidence of the massive "Lee-Fukuyama" phason and highlight the potential applicability of fundamental collective modes of correlated materials as compact and robust sources of THz radiation.

36 MATERIALS SCIENCE↗