Search NASA⌕ Search

SEARCH · Search NASA

Results for “VALVES - OVERLAP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Evaluating the efficacy of aluminide coatings to improve oxidation resistance of high performance engine valve alloys

Increasing peak cylinder pressures and operating temperatures of turbo-charged internal combustion engines (ICEs) engines present new challenges for existing materials employed in engine exhaust valves. Oxidation induced degradation of current Ni based alloys for these components will be a life-limiting mechanism while strict cost margins in the automotive transportation industry further limit the choice of suitable candidate materials. Metallic diffusion aluminide coatings can provide a cost-effective way to improve the oxidation resistance of underlying materials. In this study, the high temperature oxidation behavior of diffusion nickel aluminide coatings on two Ni based alloys (commercially available alloy 31V and a developmental alloy) during cyclic oxidation behavior in air+10% H 2 O at 900 °C was investigated. A complete depletion of the beneficial Al-rich β-(NiFe)Al phase was observed in the coating on alloy 31V while a significant fraction of this phase was retained in the coating on the second alloy. A coupled thermodynamic-kinetic model showed that the disappearance of the Al-rich phase in the coating on 31V was mainly due to the combined effect of steeper chemical potential gradients of Al and Ti between the coating and the substrate and their faster diffusivities compared to the coated developmental alloy. Finally, a higher content of Fe was shown to support the retention of β-(NiFe)Al phase in the coating on the developmental alloy while the presence of Ti in the alloy was shown to be detrimental for long-term coating performance.

36 MATERIALS SCIENCE↗

Optically Addressable Light Valve Based on a GaN:Mn Photoconductor

Semi-insulating manganese-doped gallium nitride (GaN:Mn) layers epitaxially grown on unintentionally doped GaN substrates were used as photoconductors in optically addressable light valves (OALVs) to withstand higher operational laser fluences compared to current state-of-the-art OALVs where bismuth silicon oxide (BSO; Bi 12 SiO 20 ) layers are used as photoconductors. GaN:Mn promises to be an exciting material for optoelectronic operations due to its large laser fluence handling capability and photoresponsivity near the band edge. The laser damage thresholds for the semi-insulating epitaxial GaN:Mn layer and the n-type substrate layer were measured to be 2.4 and 4.2 J/cm 2 , respectively. These are 6–10 times higher than that of BSO (0.4 J/cm 2 ). These measurements were performed by exposing ~200 sites on the samples to increasing fluence levels from a Gaussian pulsed Nd:YAG laser system (1064 nm) operating at a 5 Hz repetition rate with a 3 ns pulse width. Photoresponsivity of the GaN:Mn material was investigated at discrete wavelengths of 447, 405, and 380 nm. Further, the peak photoresponsivity was observed under an illumination wavelength of 380 nm and is attributed to stronger absorption. The OALV was fabricated by attaching a 110-μm-thick GaN:Mn layer grown on a 280-μm-thick n-GaN layer to a 3-mm-thick BK7 optical window. A twisted nematic E7 liquid crystal was introduced to the 5 μm gap between the two components. Transmission levels of >90% were achieved for the fabricated OALVs for a peak voltage of 40 V, constrained by transmission “bleed-through”.

36 MATERIALS SCIENCE↗

Windowless microfluidic platform based on capillary burst valves for high intensity x-ray measurements

We propose and describe a microfluidic system for high intensity x-ray measurements. The required open access to a microfluidic channel is provided by an out-of-plane capillary burst valve (CBV). The functionality of the out-of-plane CBV is characterized with respect to the diameter of the windowless access hole, ranging from 10 to 130 {mu}m. Maximum driving pressures from 22 to 280 mbar corresponding to refresh rates of the exposed sample from 300 Hz to 54 kHz is demonstrated. The microfluidic system is tested at beamline ID09b at the ESRF synchrotron radiation facility in Grenoble, and x-ray scattering measurements are shown to be feasible and to require only very limited amounts of sample, <1 ml/h of measurements without recapturing of sample. With small adjustments of the present chip design, scattering angles up to 30 deg. can be achieved without shadowing effects and integration on-chip mixing and spectroscopy appears straightforward.

43 PARTICLE ACCELERATORS↗

PULSED EDDY CURRENT THICKNESS MEASUREMENT OF SELECTIVE PHASE CORROSION ON NICKEL ALUMINUM BRONZE VALVES

Nickel Aluminum Bronze (NAB) is a material with marine environment applications that under certain conditions can undergo selective phase corrosion (SPC). SPC involves the removal of minority elements while leaving behind a copper matrix. Pulsed eddy current (PEC) was evaluated for determination of SPC thickness on a NAB valve section with access from the surface corroded side. A primarily linear response of PEC amplitude, up to the maximum available SPC thickness of 4 mm was observed. The combination of reduced conductivity and permeability in the SPC phase relative to the base NAB was used to explain the observed sensitivity of PEC to SPC thickness variations.

36 MATERIALS SCIENCE↗

Micromagnetic simulation of spin-transfer switching in a full-Heusler Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} alloy spin-valve nanopillar

We investigated the spin-transfer switching in a full-Heusler Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} alloy spin-valve nanopillar through micromagnetic simulation. A two-step switching hysteresis loop due to the fourfold in-plane magnetocrystalline anisotropy of Co{sub 2}FeAl{sub 0.5}Si{sub 0.5} layers was obtained. The simulation explains the experimental result of the resistance versus current hysteresis loop and yields good agreement with the measured critical current. Furthermore, the magnetization trajectory and magnetization distribution were shown and analyzed to elucidate the different characters of two-step switching.

36 MATERIALS SCIENCE↗

Configuration and temperature dependence of magnetic damping in spin valves

Using vector-analyzer ferromagnetic resonance, we have studied the microwave susceptibility of a Py/Co/Cu/Co/MnIr spin valve over a large temperature range (5-450 K) and as a function of the magnetic configuration. An effective magnetization and Gilbert damping constant of 1.1 T and 0.021, respectively, are found for the permalloy free layer, with no discernible variation in temperature observed for either quantities. In contrast, the pinned layer magnetization is reduced by heating, and the exchange bias collapses near a temperature of 450 K. The ferromagnetic resonance linewidth of the free layer increases by 500 MHz when the layer magnetizations are aligned in antiparallel, which is attributed to a configuration-dependent contribution to the damping from spin pumping effects.

36 MATERIALS SCIENCE↗

Observation and implications of magnetic domains in lateral spin valves

Co/Cu/Co lateral spin valves (LSV), with Co being the topmost layer, are in situ prepared and measured under ultrahigh vacuum conditions. The clean process yields a non-local spin signal of 0.9 m{Omega}. Scanning electron microscopy with polarization analysis (SEMPA) reveals domain structures in both magnetic electrodes that depend on the LSV dimensions. The spin signal correlates to SEMPA images as well as the anisotropic magnetoresistance of both Co magnets, revealing a strong impact of multi-domain states on the spin signal.

36 MATERIALS SCIENCE↗

Bi-quadratic interlayer exchange coupling in Co{sub 2}MnSi/Ag/Co{sub 2}MnSi pseudo spin-valve

Bi-quadratic interlayer exchange coupling is found below 100 K in a Co{sub 2}MnSi/Ag/Co{sub 2}MnSi current-perpendicular-to-plane pseudo spin valves. The bi-quadratic coupling constant J{sub 2} was estimated to be {approx}-0.30 erg/cm{sup 2} at 5 K and the strong temperature dependence of the coupling strength points its likely origin to the ''loose spin'' model. Application of current of {approx}2 x 10{sup 7} A/cm{sup 2} below 100 K leads to an increase in the magnetoresistance (MR), indicating current induced antiparallel alignment of the two magnetic layers. These results strongly suggest that the presence of the bi-quadratic interlayer exchange coupling causes the reduction of the magnetoresistance at low temperature and illustrates the importance of understanding the influence of interlayer exchange coupling on magnetization configuration in magnetic nanostructures.

36 MATERIALS SCIENCE↗

(001) textured L1{sub 0}-FePt pseudo spin valve with TiN spacer

TiN was investigated as a potential spacer material in L1{sub 0}-FePt based pseudo spin valves (PSV). PSVs with the structure MgO/L1{sub 0}-Fe{sub 50}Pt{sub 50} (20 nm)/TiN (5 nm)/L1{sub 0}-Fe{sub 50}Pt{sub 50} (x nm) were fabricated, where x was varied from 5 to 20 nm. The highest giant magnetoresistance (GMR) ratio of 0.61% was obtained for the PSV with a top L1{sub 0}-FePt thickness of 20 nm. Contributions to the GMR arose from both the spin dependent scattering at the FePt/TiN interfaces and domain wall resistivity. Magnon magnetoresistance was also observed in the fabricated PSVs.

36 MATERIALS SCIENCE↗

Effects of boron composition on tunneling magnetoresistance ratio and microstructure of CoFeB/MgO/CoFeB pseudo-spin-valve magnetic tunnel junctions

The effect of B concentration on the tunneling magnetoresistance (TMR) of (Co{sub 25}Fe{sub 75}){sub 100-x}B{sub x}/MgO/(Co{sub 25}Fe{sub 75}){sub 100-x}B{sub x} (x = 22 and 33) pseudo-spin-valve (P-SV) magnetic tunnel junctions (MTJs) was investigated. The TMR ratios for optimally annealed MTJs with x = 22 and 33 were 340% and 170%, respectively, at room temperature. High resolution transmission electron microscopy (HRTEM) observation showed a weaker (001) texture in the MgO barrier in the MTJ with x = 33. The bottom electrode was not fully crystallized even with a considerable amount of B in the (Co{sub 25}Fe{sub 75}){sub 67}B{sub 33}, while good epitaxy was observed between (001) textured MgO and (Co{sub 25}Fe{sub 75}){sub 78}B{sub 22} electrodes.

36 MATERIALS SCIENCE↗

Polycrystalline current-perpendicular-to-plane giant magnetoresistance pseudo spin-valves using Co{sub 2}Mn(Ga{sub 0.25}Ge{sub 0.75}) Heusler alloy

We have studied the structure and magnetoresistive properties of polycrystalline current-perpendicular-to-plane giant magnetoresistance pseudo spin-valves (PSVs) with Co{sub 2}Mn(Ga{sub 0.25}Ge{sub 0.75}) (CMGG) ferromagnetic layers and a Ag spacer. With (110) textured CMGG thin films and (111) textured Ag spacer, the PSVs annealed at 350 °C with 2 nm CoFe buffer layers showed ΔRA of 3.7 mΩ μm{sup 2} and MR ratio of 12.2%, while the PSVs without the buffer layer showed ΔRA of only 1.3 mΩ μm{sup 2}. High angle angular dark field images showed that the drop of ΔRA by annealing was due to the deterioration of the multi-layer CMGG/Ag/CMGG structure. Energy-dispersive X-ray spectroscopy images further confirmed the interdiffusion between CMGG layer and the Ag layer outside the CMGG/Ag/CMGG trilayer. In addition, we discuss the difference in the magnetoresistive properties of polycrystalline and epitaxial PSVs.

36 MATERIALS SCIENCE↗

〈001〉 textured polycrystalline current-perpendicular-to-plane pseudo spin-valves using Co{sub 2}Fe(Ga{sub 0.5}Ge{sub 0.5}) Heusler alloy

The orientation dependence of current-perpendicular-to-plane giant-magnetoresistance (CPP-GMR) was investigated by fabricating 〈001〉 textured polycrystalline pseudo spin valves (PSVs) with Co{sub 2}Fe(Ga{sub 0.5}Ge{sub 0.5}) (CFGG) Heusler alloy ferromagnetic layers and a Ag spacer. The PSV with 10 nm CFGG annealed at 400 °C exhibited the resistance-change area product (ΔRA) of 5.8 mΩ (MR ratio of 16%), the largest value reported for polycrystalline CPP-(P)SVs. The 〈001〉 textured CFGG PSV outperforms the 〈011〉 textured CFGG PSV possibly due to the reduced lattice mismatch or improved band matching at the CFGG/Ag interface.

36 MATERIALS SCIENCE↗

Note: Hollow cathode lamp with integral, high optical efficiency isolation valve: A modular vacuum ultraviolet source

The design and operating conditions of a hollow cathode discharge lamp for the generation of vacuum ultraviolet radiation, suitable for ultrahigh vacuum (UHV) application, are described in detail. The design is easily constructed, and modular, allowing it to be adapted to different experimental requirements. A thin isolation valve is built into one of the differential pumping stages, isolating the discharge section from the UHV section, both for vacuum safety and to allow lamp maintenance without venting the UHV chamber. The lamp has been used both for ultraviolet photoelectron spectroscopy of surfaces and as a “soft” photoionization source for gas-phase mass spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultra-thin L1{sub 0}-FePt for perpendicular anisotropy L1{sub 0}-FePt/Ag/[Co/Pd]{sub 30} pseudo spin valves

Perpendicular anisotropy L1{sub 0}-FePt/Ag/[Co/Pd]{sub 30} pseudo spin valves (PSVs) with ultra-thin L1{sub 0}-FePt alloy free layer possessing high anisotropy and thermal stability have been fabricated and studied. The thickness of the L1{sub 0}-FePt layer was varied between 2 and 4 nm. The PSV became increasingly decoupled with reduced L1{sub 0}-FePt thickness due to the larger difference between the coercivity of the L1{sub 0}-FePt and [Co/Pd]{sub 30} films. The PSV with an ultra-thin L1{sub 0}-FePt free layer of 2 nm displayed a high K{sub u} of 2.21 × 10{sup 7} ergs/cm{sup 3}, high thermal stability of 84 and a largest giant magnetoresistance of 0.54%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature driven transition from giant to tunneling magneto-resistance in Fe{sub 3}O{sub 4}/Alq{sub 3}/Co spin Valve: Role of Verwey transition of Fe{sub 3}O{sub 4}

We demonstrate interface energy level engineering, exploiting the modification in energy band structure across Verwey transition temperature (T{sub V}) of Fe{sub 3}O{sub 4}, in a Fe{sub 3}O{sub 4}(111)/Alq{sub 3}/Co spin-valve (SV). I-V characteristics exhibit a transition in conduction mode from carrier injection to tunneling across T{sub V} of Fe{sub 3}O{sub 4} electrode. Both giant magneto-resistance (GMR) and tunneling MR (TMR) have been observed in a single SV, below and above T{sub V}, respectively. We have achieved room-temperature SV operation in our device. We believe that the tuning of charge gap at Fermi level across T{sub V} resulting in a corresponding tuning of conduction mode and a unique cross over from GMR to TMR.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial spectroscopic characterization of organic/ferromagnet hetero-junction of 3,4,9,10-perylene-teracarboxylic dianhydride-based organic spin valves

We report interfacial characterization of 3,4,9,10-perylene-teracarboxylic dianhydride (PTCDA)-based organic spin valves (OSV) dusted with a thin layer of partially oxidized alumina at the organic semiconductor (OSC)/ferromagnet (FM) interfaces. Up to 13.5% magnetoresistance is achieved at room temperature. X-ray photoelectron spectroscopy measurements reveal interfacial electronic interaction between PTCDA and FM while the application of a thin alumina layer at the PTCDA/FM interfaces prevents the electronic hybridization and effectively preserves the spin injection into the OSC spacer. This finding demonstrates the critical effect of interfacial structure on magnetotransport behavior in OSV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local magnetoresistance through Si and its bias voltage dependence in ferromagnet/MgO/silicon-on-insulator lateral spin valves

Local magnetoresistance (MR) through silicon (Si) and its bias voltage (V{sub bias}) (bias current (I{sub bias})) dependence in ferromagnet (FM)/MgO/silicon-on-insulator lateral spin valves are investigated. From the experimental measurements, we find that the local-MR through Si increases with increasing V{sub bias}. This anomalous increase of local-MR as a function of V{sub bias} can be understood by considering the standard drift-diffusion theory improved by taking into account the difference in the interface resistances and first order quantum effect between FM/MgO/Si (source) and Si/MgO/FM (drain) interfaces. The interface resistance dependence on experimentally obtained local-MR ratios also agrees with the improved standard spin diffusion theory. These results indicate that experimentally observed local-MR is certainly related to the spin signal through the Si bulk band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modelling current-induced magnetization switching in Heusler alloy Co{sub 2}FeAl-based spin-valve nanopillar

We investigated the current-induced magnetization switching in a Heusler alloy Co{sub 2}FeAl-based spin-valve nanopillar by using micromagnetic simulations. We demonstrated that the elimination of the intermediate state is originally resulted from the decease of effective magnetic anisotropy constant. The magnetization switching can be achieved at a small current density of 1.0 × 10{sup 4} A/cm{sup 2} by increasing the demagnetization factors of x and y axes. Based on our simulation, we found magnetic anisotropy and demagnetization energies have different contributions to the magnetization switching.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗