Search NASA⌕ Search

SEARCH · Search NASA

Results for “absorber efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

A cesium plasma TELEC device for conversion of laser radiation to electric power

Tests of the thermoelectronic laser energy converter (TELEC) concept are reported. This device has been devised as a means to convert high-average-power laser radiation into electrical energy, a crucial element in any space laser power transmission scheme using the available high-power/efficiency infrared lasers. Theoretical calculations, based upon inverse bremsstrahlung absorption in a cesium plasma, indicate internal conversion efficiency up to 50% with an overall system efficiency of 42%. The experiments reported were made with a test cell designed to confirm the theoretical model rather than demonstrate efficiency; 10.6-micron laser-beam absorption was limited to about 0.001 of the incident beam by the short absorption region. Nevertheless, confirmatory results were obtained, and the conversion of absorbed radiation to electric power is estimated to be near 10%.

Britt, E. J.↗
NASA NTRS1993

Energy-absorbing-beam design for composite aircraft subfloors

Data have been presented from the design support testing of composite energy absorbing (EA) aircraft subfloor structures. The focus of the current study is the design and testing of subfloor structural concepts that would limit the loads transmitted to occupants to less than 20 g at crush speeds of approximately 30 fps. The EA composite subfloor is being designed to replace an existing noncrashworthy metallic subfloor in a composite aircraft prior to a full-scale crash test. A sandwich spar construction of a sine wave beam was chosen for evaluation and was found to have excellent energy absorbing characteristics. The design objective of obtaining sustained crushing loads of the spar between 200-300 lbf/inch were achieved for potentially limiting occupants loads to around 20 g's. Stroke efficiency of up to 79 percent of the initial spar height under desired sustained crushing loads was obtained which is far greater than the level provided by metal structure. Additionally, a substantial residual spar stiffness was retained after impact, and the flange integrity, which is critical for seat retention, was maintained after crushing of the spars.

Carden, Huey D.↗
NASA NTRS2003

Conducting the Heat

Heat conduction plays an important role in the efficiency and life span of electronic components. To keep electronic components running efficiently and at a proper temperature, thermal management systems transfer heat generated from the components to thermal surfaces such as heat sinks, heat pipes, radiators, or heat spreaders. Thermal surfaces absorb the heat from the electrical components and dissipate it into the environment, preventing overheating. To ensure the best contact between electrical components and thermal surfaces, thermal interface materials are applied. In addition to having high conductivity, ideal thermal interface materials should be compliant to conform to the components, increasing the surface contact. While many different types of interface materials exist for varying purposes, Energy Science Laboratories, Inc. (ESLI), of San Diego, California, proposed using carbon velvets as thermal interface materials for general aerospace and electronics applications. NASA s Johnson Space Center granted ESLI a Small Business Innovation Research (SBIR) contract to develop thermal interface materials that are lightweight and compliant, and demonstrate high thermal conductance even for nonflat surfaces. Through Phase II SBIR work, ESLI created Vel-Therm for the commercial market. Vel-Therm is a soft, carbon fiber velvet consisting of numerous high thermal conductivity carbon fibers anchored in a thin layer of adhesive. The velvets are fabricated by precision cutting continuous carbon fiber tows and electrostatically flocking the fibers into uncured adhesive, using proprietary techniques.

Source record↗
NASA NTRS1994

A detailed evaluation of heating processes in the middle atmosphere

A fundamental problem in the study of the terrestrial middle atmosphere is to calculate accurately the local heating due to the absorption of solar radiation. Knowledge of the heat budget is essential to understanding the atmospheric thermal structure, atmospheric motions, atmospheric chemistry, and their coupling. The evaluation of heating rates is complicated (especially above the stratopause) by the fact that the heating is not a simple one-step process. That is, the absorbed solar energy does not all immediately appear as heat. Rather, substantial portions of the incident energy may appear as internal energy of excited photolysis products (e.g., O(1D) or O2(1 delta)) or as chemical potential energy of product species such as atomic oxygen. The ultimate disposition of the internal and chemical energy possessed by the photolysis products determines the efficiency and thus the rate at which the middle atmosphere is heated. In studies of the heat budget, it is also vitally important to consider transport of long lived chemical species such as atomic oxygen above approximately 80 km. In such cases, the chemical potential energy may be transported great distances (horizontally or vertically) before undergoing a reaction to release the heat. Atomic oxygen influences the heating not only by reactions with itself and with O2 but also by reactions with odd-hydrogen species, especially those involving OH (Mlynczak and Solomon, 1991a). Consequently, absorbed solar energy may finally by converted to heat a long time after and at a location far from the original deposition. The purpose of this paper is to examine the solar and chemical heating processes and to present parameterizations for the heating efficiencies readily applicable for use in numerical models and heat budget studies. In the next two sections the processes relevant to the heating efficiencies for ozone and molecular oxygen will be reviewed. In section 4 the processes for the exothermic reactions will be reviewed and parameterizations for the heating efficiencies for both the solar and chemical processes will be presented in Section 5.

Mlynczak, Martin↗
DOE OSTI2022

Molecular Coatings Improve the Selectivity and Durability of CO 2 Reduction Chalcogenide Photocathodes

The quest for solar-driven conversion of carbon dioxide to chemicals and fuels hinges upon the identification of an efficient, durable, and selective photocathode. Chalcogenide p-type semiconductors exemplified by chalcopyrite Cu(In,Ga)Se 2 (CIGS) have been effectively deployed as photocathodes. However, selectivity toward CO 2 reduction and durability of the commonly used CdS adlayer remain primary challenges. Here, we demonstrate that for the wide band gap CuGa 3 Se 5 chalcopyrite absorber these challenges are well addressed by an organic coating generated in situ from an N,N'-(1,4-phenylene)bispyridinium ditriflate salt in the electrolyte. The molecular additive provides a 30-fold increase in selectivity toward CO2R products compared to the unmodified system and lowers Cd corrosion at least 10-fold. This dual functionality highlights the promise of hybrid solid-state-molecular photocathodes for enabling durable and efficient solar fuel systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Chemical and Electronic Structure at the Interface between a Sputter-Deposited Zn(O,S) Buffer and a Cu(In,Ga)(S,Se) 2 Solar Cell Absorber

The chemical and electronic structure of the interface between a sputter-deposited Zn(O,S) buffer layer and an industrial Cu(In,Ga)(S,Se) 2 (CIGSSe) absorber for thin-film solar cells is investigated with X-ray and UV photoelectron spectroscopy, inverse photoemission spectroscopy, and X-ray emission spectroscopy. We find a CIGSSe absorber surface band gap of 1.61 (±0.14) eV, which is significantly increased as compared to the minimal value derived with bulk-sensitive methods (≈1.1 eV). We find no indication for diffusion of absorber elements into the buffer layer. Surface- and bulk-sensitive measurements of the buffer layer suggest the presence of S-Zn and S-O bonds in the Zn(O,S) layer. We find that the naturally existing downward band bending toward the CIGSSe absorber surface is increased by the formation of the interface, likely enhancing carrier separation under illumination. We also derive a flat conduction band alignment, in line with the reported high conversion efficiencies of corresponding large-area solar cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Constraints on key O 17 ( α , γ ) Ne 21 resonances and impact on the weak s process

The efficiency of the slow neutron-capture process in massive stars is strongly influenced by neutron-capture reactions on light elements. At low metallicity, 16 O is an important neutron absorber, but the effectiveness of 16 O as a light-element neutron poison is modified by competition between subsequent 17 O(α,n) 20 Ne and 17 O(α,γ) 21 Ne reactions. The strengths of key 17 O(α,γ) 21 Ne resonances within the Gamow window for core helium burning in massive stars are not well constrained by experiment. This work presents more precise measurements of resonances in the energy range E c.m. = 612–1319 keV. We extract resonance strengths of ωγ 638 = 4.85 ± 0.79 μeV, ωγ 721 =13.1$^{+3.2}_{-2.4}$ μeV, ωγ 814 = 7.72 ± 0.55 meV, and ωγ 1318 = 136 ±13 meV, for resonances at E c.m. = 638, 721, 814, and 1318 keV, respectively. We also report an upper limit for the 612 keV resonance of ωγ < 140 neV (95% c.l.), which effectively rules out any significant contribution from this resonance to the reaction rate. From this work, a new 17 O(α,γ) 21 Ne thermonuclear reaction rate is calculated and compared to the literature. The effect of present uncertainties in the 17 O(α,γ) 21 Ne reaction rate on weak s-process yields are then explored using postprocessing calculations based on a rotating 20M ⊙ low-metallicity massive star. The resulting 17 O(α,γ) 21 Ne reaction rate is lower with respect to the preexisting literature and found to enhance weak s-process yields in rotating massive star models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1977

Low to high temperature energy conversion system

A method for converting heat energy from low temperature heat sources to higher temperature was developed. It consists of a decomposition chamber in which ammonia is decomposed into hydrogen and nitrogen by absorbing heat of decomposition from a low temperature energy source. A recombination reaction then takes place which increases the temperature of a fluid significantly. The system is of use for the efficient operation of compact or low capital investment turbine driven electrical generators, or in other applications, to enable chemical reactions that have a critical lower temperature to be used. The system also recovers heat energy from low temperature heat sources, such as solar collectors or geothermal sources, and converts it to high temperatures.

Miller, C. G.↗
NASA NTRS1997

Transition and Turbulence Modeling for Blunt-Body Wake Flows

Aerobraking has been proposed as an efficient means of decelerating spacecraft for planetary missions. Most current aerobrake designs feature a blunt forebody shielding the payload from the intense heat generated during atmospheric entry. Although this forebody will absorb the largest portion of the heat pulse, accurate prediction of heating in the near wake is of great importance, since large local heating values can occur at points of shear-layer impingement. In order to address the various issues associated with these blunt-body wake flowfields, the Advisory Group for Aerospace Research and Development (AGARD) formed Working Group 18 in 1992. One of the objectives of this activity was to examine real-gas effects in high-speed flow fields around a 70 deg. blunted cone. To date, many researchers have conducted experiments using this geometry in various facilities, such as the Large Energy National Shock (LENS) tunnel at Cubric/Calspan and the HEG shock tunnel at DLR-Goettingen. Several computational studies have also been conducted in concert with these tests. Many of the experimental results have indicated the possible presence of a transitional shear layer through a large increase in heat transfer downstream of the reattachment point. The presence of transition could in fact lead to much higher peak heating than if the separated flow is entirely laminar or turbulent. In the shock-tunnel tests, however, it is difficult to separate such viscous-flow phenomena from real-gas effects. In order to help make this distinction, Horvath et al. recently conducted a set of experiments in the NASA Langley 20-Inch Mach 6 Tunnel, and compared the results to laminar Navier-Stokes calculations. They found heat-transfer distributions similar to those obtained in the high-enthalpy facilities, with the measured peak heating along the sting support markedly greater than that predicted by the laminar computations. These trends point to the need to find transitional and turbulent computational solutions for these flowfields.

Nance, Robert P.↗
NASA NTRS2011

Optical Sensors for Monitoring Gamma and Neutron Radiation

For safety and efficiency, nuclear reactors must be carefully monitored to provide feedback that enables the fission rate to be held at a constant target level via adjustments in the position of neutron-absorbing rods and moderating coolant flow rates. For automated reactor control, the monitoring system should provide calibrated analog or digital output. The sensors must survive and produce reliable output with minimal drift for at least one to two years, for replacement only during refueling. Small sensor size is preferred to enable more sensors to be placed in the core for more detailed characterization of the local fission rate and fuel consumption, since local deviations from the norm tend to amplify themselves. Currently, reactors are monitored by local power range meters (LPRMs) based on the neutron flux or gamma thermometers based on the gamma flux. LPRMs tend to be bulky, while gamma thermometers are subject to unwanted drift. Both electronic reactor sensors are plagued by electrical noise induced by ionizing radiation near the reactor core. A fiber optic sensor system was developed that is capable of tracking thermal neutron fluence and gamma flux in order to monitor nuclear reactor fission rates. The system provides near-real-time feedback from small- profile probes that are not sensitive to electromagnetic noise. The key novel feature is the practical design of fiber optic radiation sensors. The use of an actinoid element to monitor neutron flux in fiber optic EFPI (extrinsic Fabry-Perot interferometric) sensors is a new use of material. The materials and structure used in the sensor construction can be adjusted to result in a sensor that is sensitive to just thermal, gamma, or neutron stimulus, or any combination of the three. The tested design showed low sensitivity to thermal and gamma stimuli and high sensitivity to neutrons, with a fast response time.

Boyd, Clark D.↗
NASA NTRS2014

Development and Testing of a Refractory Millimeter-Wave Absorbent Heat Exchanger

Central to the Millimeter-Wave Thermal Launch System (MTLS) is the millimeter-wave absorbent heat exchanger. We have developed metallic and ceramic variants, with the key challenge being the millimeter-wave absorbent coatings for each. The ceramic heat exchanger came to fruition first, demonstrating for the first time 1800 K peak surface temperatures under illumination by a 110 GHz Gaussian beam. Absorption efficiencies of up to 80 are calculated for mullite heat exchanger tubes and up to 50 are calculated for alumina tubes. These are compared with estimates based on stratified layer and finite element analyses. The problem of how to connect the 1800 K end of the ceramic tubes to a graphite outlet manifold and nozzle is solved by press fitting, or by threading the ends of the ceramic tubes and screwing them into place. The problem of how to connect the ceramic tubes to a metallic or nylon inlet pipe is solved by using soft compliant PTFE and PVC tubes that accommodate thermal deformations of the ceramic tubes during startup and operation. We show the resulting heat exchangers in static tests using argon and helium as propellants.

propulsion↗
NASA NTRS2013

Efficient Cells Cut the Cost of Solar Power

If you visit Glenn Research Center, you might encounter a photovoltaic (PV) array that looks unlike anything you've ever seen. In fact, what one would normally identify as the panel is actually a series of curved mirrors called solar concentrators, engineered to reflect sunlight rather than absorb it. These concentrators gather, intensify, and focus sun beams upward, aiming at a fixture containing specialized silicon concentrated PV chips the actual solar cells. If you stay by the array for a while, you'll notice that the solar concentrators follow the path of the sun throughout the day, changing position to best capture and utilize the sunlight. The specialized chips that make the technology possible are the brainchild of Bernard Sater, an engineer who had worked at Glenn since the early 1960s before retiring to pursue his unique ideas for harnessing solar power. Sater contributed to multiple PV projects in the latter part of his career at the Center, including research and development on the International Space Station s solar arrays. In his spare time, he enjoyed tinkering with new approaches to solar power, experiments that resulted in the system installed at Glenn today. Sater s basic idea had two components. First, he wanted to create a silicon cell that was smaller, more efficient, and much lower cost than those available at the time. To ensure that the potential of such a chip could be realized, he also planned on pairing it with a system that could concentrate sunlight and focus it directly on the cell. When he retired from Glenn in 1994 to focus on researching and developing the technology full time, Sater found that NASA was interested in the concept and ready to provide funding, facilities, and expertise in order to assist in its development.

Source record↗
DOE OSTI2021

New-Generation Carbon-Capture Ionic Liquids Regulated by Metal-Ion Coordination

Development of efficient carbon capture-and-release technologies with minimal energy input is a long-term challenge in mitigating CO 2 emissions, especially via CO 2 chemisorption driven by engineered chemical bond construction. Herein, taking advantage of the structural diversity of ionic liquids (ILs) in tuning their physical and chemical properties, precise reaction energy regulation of CO 2 chemisorption was demonstrated deploying metal-ion-amino-based ionic liquids (MAILs) as absorbents. The coordination ability of different metal sites (Cu, Zn, Co, Ni, and Mg) to amines was harnessed to achieve fine-tuning on stability constants of the metal ion-amine complexes, acting as the corresponding cations in the construction of diverse ILs coupled with CO 2 -philic anions. The as-afforded MAILs exhibited efficient and controllable CO 2 release behavior with great reduction in energy input and minimal sacrifice on CO 2 uptake capacity. This coordination-regulated approach offers new prospects for the development of ILs-based systems and beyond towards energy-efficient carbon capture technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Identifying Suitable Front Contacts for High‐Efficiency Cd(Se,Te) Solar Cells on Space‐Qualified Cover Glass

Deployment of photovoltaics in space requires devices that combine high-efficiency, low areal mass, and resilience to harsh environments. Historically, high-efficiency multijunction III–V materials have dominated space power systems; however, their high cost and limited manufacturing throughput motivate the exploration of scalable alternatives. While CdTe-based thin-film photovoltaics offer an attractive option, their performance on non-conventional substrates can suffer from front contact instability under higher-temperature processing. Here, the role of front contact chemistry in limiting cell performance is investigated using CdTe-based devices fabricated on 150 μm thick Ceria-doped space-qualified 0214 Corning glass. A matrix of four transparent conducting oxides (TCOs: CTO, AZO, ITO, IZO) combined with two n-type emitters (MZO, IGO) reveals chemical stability at the front interface—rather than absorber composition alone—governs recombination losses, voltage deficits, and device reproducibility. Chemically stable front contact combinations suppress elemental diffusion and interfacial degradation, resulting in significantly improved carrier lifetimes and junction quality. These insights are validated through record-certified Cd(Se,Te) cell efficiencies of 18.4% under AM1.5G and 16.2% under AM0 illumination on ultra-thin glass. Beyond CdTe, this work provides a general framework for the rational selection of TCO/emitter interfaces in superstrate thin-film photovoltaics, including emerging technologies like metal halide perovskites, while enabling high-efficiency, lightweight photovoltaics for space applications.

14 SOLAR ENERGY↗
NASA NTRS1993

Physical chemistry of the H2SO4/HNO3/H2O system - Implications for polar stratospheric clouds

Polar stratospheric clouds (PSCs) play a key role in stratospheric ozone depletion. Surface-catalyzed reactions on PSC particles generate chlorine compounds that photolyze readily to yield chlorine radicals, which in turn destroy ozone very efficiently. The most prevalent PSCs form at temperatures several degrees above the ice frost point and are believed to consist of HNO3 hydrates; however, their formation mechanism is unclear. Results of laboratory experiments are presented which indicate that the background stratospheric H2SO4/H2O aerosols provide an essential link in this mechanism: These liquid aerosols absorb significant amounts of HNO3 vapor, leading most likely to the crystallization of nitric acid trihydrate (NAT). The frozen particles then grow to form PSCs by condensation of additional amounts of HNO3 and H2O vapor. Furthermore, reaction probability measurements reveal that the chlorine radical precursors are formed readily at polar stratospheric temperatures not just on NAT and ice crystals, but also on liquid H2SO4 solutions and on solid H2SO4 hydrates. These results imply that the chlorine activation efficiency of the aerosol particles increases rapidly as the temperature approaches the ice frost point regardless of the phase or composition of the particles.

Molina, M. J.↗
DOE OSTI2022

Enhancement of Two Heterogeneous Reactions in the Production of the Medical Isotope 188 W

We report the efficiency of heterogeneous reactions is influenced by kinetic conditions with an emphasis on reactants in different phases to have effective interactions. Optimal interactions of reactants rely on the rational design of the equipment and engineering parameters for the reaction process, especially for the process on a large scale. 188 W production at the Oak Ridge National Laboratory is such an example. In processing the irradiated 186 W metal target for the 188 W product, two of the heterogeneous reactions are essential ones: (1) the gas–solid reaction of O 2 + W to form WO 3 and (2) the gas–liquid reaction of OsO 4 being absorbed by the NaOH sorbent. Better understanding of the two reactions has led to revisions to the design of the quartz reaction vessel (gas–solid reaction) and the scrubbing system (gas–liquid reaction). The optimized quartz vessel resulted in less heating hours, whereas a more efficient OsO 4 scrubbing system ensured that all volatile OsO 4 was qualitatively captured.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Planar-Cavity Receiver Configuration for High-Temperature Solar Thermal Processes: Preprint

Next generation concentrating solar thermal power (CSP) and novel solar thermochemical systems using concentrating solar thermal (CST) energy require high operating temperatures exceeding those of traditional nitrate-salt CSP systems. Particle-based systems are attractive for next-generation CSP and CST applications owing to high-temperature stability of inert silica- or alumina-based particulate materials, the lack of low-temperature freezing concerns that limit molten salt and/or molten metal heat transfer media, and cost-effective thermal storage using low-cost particulate and containment materials. Open-cavity falling particle receivers have many potential advantages, but face challenges pertaining to scalability, thermal loss, and particle loss through the open aperture, and are infeasible for chemical processes that require a low-oxygen ambient environment. Enclosed receiver configurations can be scalable, avoid particle loss when heating particles, and have potential for future chemical processes; however, particle-based heat transfer media provide substantially lower heat transfer rates than liquid media, and thus enclosed particle receiver designs require novel configurations to limit surface temperatures under the high incident solar flux concentrations necessary for high receiver thermal efficiency at high temperature. This paper introduces the novel planar-cavity enclosed particle receiver configuration in which arrays of planar surfaces are arranged into sub-vertical cavities. Large angles between the panel surface normal vectors and the aperture surface normal allow the incoming solar beam to distribute along the panel walls. Correspondingly, a high incident solar flux concentration at the cavity aperture produces substantially lower absorbed solar flux concentration on any panel wall. Sets of individual vertical cavities can be arranged to form a scalable receiver configuration.

cavity receiver↗
DOE OSTI2020

15.9% organic tandem solar cell with extended near-infrared absorption

Stacking single-junction organic solar cells is effective in increasing the power conversion efficiency (PCE) by reducing the thermalization loss and increasing the open circuit voltage. Current developments of non-fullerene acceptors (NFAs) offer a range of materials whose energy gaps are suited for absorbing relatively narrow slices of the solar spectrum, thus easing requirements for current balance between sub-elements in the multijunction stacks. In this report, we demonstrate a solution-processed tandem organic solar cell comprising a binary, visible-absorbing sub-cell and a ternary near-infrared (NIR) absorbing sub-cell. The ternary NIR sub-cell utilizes a narrow energy gap NFA acceptor that enables a broadened and increased absorption compared to a binary NIR sub-cell. An isopropanol surface treatment is developed to connect the hydrophilichydrophobic surfaces in the charge recombination zone (CRZ) located between the sub-cells. The nearly optically and electrically lossless CRZ combined with an anti-reflection coating results in a tandem OPV with PCE = 15.9 ± 0.2 % under AM 1.5G simulated illumination.

14 SOLAR ENERGY↗