Search NASA⌕ Search

SEARCH · Search NASA

Results for “astronomy data analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

THE ACS SURVEY OF GALACTIC GLOBULAR CLUSTERS. X. NEW DETERMINATIONS OF CENTERS FOR 65 CLUSTERS

We present new measurements of the centers for 65 Milky Way globular clusters. Centers were determined by fitting ellipses to the density distribution within the inner 2' of the cluster center, and averaging the centers of these ellipses. The symmetry of clusters was also analyzed by comparing cumulative radial distributions on opposite sides of the cluster across a grid of trial centers. All of the determinations were done with stellar positions derived from a combination of two single-orbit Advanced Camera for Surveys images of the core of the cluster in F606W and F814W. We find that the ellipse-fitting method provides remarkable accuracy over a wide range of core sizes and density distributions, while the symmetry method is difficult to use on clusters with very large cores or low density. The symmetry method requires a larger field or a very sharply peaked density distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

THE INCREASING ROTATION PERIOD OF COMET 10P/TEMPEL 2

We imaged comet 10P/Tempel 2 on 32 nights from 1999 April through 2000 March. R-band light curves were obtained on 11 of these nights from 1999 April through 1999 June, prior to both the onset of significant coma activity and perihelion. Phasing of the data yields a double-peaked light curve and indicates a nucleus rotational period of 8.941 {+-} 0.002 hr with a peak-to-peak amplitude of {approx}0.75 mag. Our data are sufficient to rule out all other possible double-peaked solutions as well as the single- and triple-peaked solutions. This rotation period agrees with one of five possible solutions found in post-perihelion data from 1994 by Mueller and Ferrin (Icarus, 123, 463-477) and unambiguously eliminates their remaining four solutions. We applied our same techniques to published light curves from 1988 which were obtained at an equivalent orbital position and viewing geometry as in 1999. We found a rotation period of 8.932 {+-} 0.001 hr in 1988, consistent with the findings of previous authors and incompatible with our 1999 solution. This reveals that Tempel 2 spun-down by {approx}32 s between 1988 and 1999 (two intervening perihelion passages). If the spin-down is due to a systematic torque, then the rotation period prior to perihelion during the 2010 apparition is expected to be an additional 32 s longer than in 1999.

79 ASTRONOMY AND ASTROPHYSICS↗

SATURATION LEVELS FOR WHITE-LIGHT FLARES OF FLARE STARS: VARIATION OF MINIMUM FLARE DURATION FOR SATURATION

Taking into account results obtained from models and from statistical analyses of obtained parameters, we discuss flare activity levels and flare characteristics of five UV Ceti stars. We present the parameters of unpublished flares detected over two years of observations of V1005 Ori. We compare parameters of the U-band flares detected over several seasons of observations of AD Leo, EV Lac, EQ Peg, V1054 Oph, and V1005 Ori. Flare frequencies calculated for all program stars and maximum energy levels of the flares are compared, and we consider which is the most correct parameter as an indicator of flare activity levels. Using the One Phase Exponential Association function, the distributions of flare equivalent duration versus flare total duration are modeled for each program star. We use the Independent Samples t-Test in the statistical analyses of the parameters obtained from the models. The results reveal some properties of flare processes occurring on the surfaces of UV Ceti type stars. (1) Flare energies cannot be higher than a specific value regardless of the length of the flare total duration. This must be a saturation level for white-light flares occurring in flare processes observed in the U band. Thus, for the first time it is shown that white-light flares have a saturation in a specific energy range. (2) The span values, which are the difference between the equivalent durations of flares with the shortest and longest total durations, are almost equal for each star. (3) The half-life values, minimum flare durations for saturation, increase toward the later spectral types. (4) Both maximum total durations and maximum rise times computed from the observed flares decrease toward the later spectral types among the UV Ceti stars. According to the maximum energy levels obtained from the models, both EV Lac and EQ Peg are more active than the other three program stars, while AD Leo is the most active flare star according to the flare frequencies.

79 ASTRONOMY AND ASTROPHYSICS↗

PROPERTIES OF SATELLITE GALAXIES IN THE SDSS PHOTOMETRIC SURVEY: LUMINOSITIES, COLORS, AND PROJECTED NUMBER DENSITY PROFILES

We analyze photometric data in the Sloan Digital Sky Survey Data Release 7 (SDSS-DR7) to infer statistical properties of faint satellites associated with isolated bright galaxies (M{sub r} < -20.5) in the redshift range 0.03 < z < 0.1. The mean projected radial number density profile shows an excess of companions in the photometric sample around the primaries, with approximately a power-law shape that extends up to {approx_equal} 700 kpc. Given this overdensity signal, a suitable background subtraction method is used to study the statistical properties of the population of bound satellites, down to magnitude M{sub r} = -14.5, in the projected radial distance range 100 < r{sub p} /kpc < 3(R{sub vir}). The maximum projected distance corresponds to the range 470-660 kpc for the different samples. We have also considered a color cut consistent with the observed colors of spectroscopic satellites in nearby galaxies so that distant redshifted galaxies do not dominate the statistics. We have tested the implementation of this background subtraction procedure using a mock catalog derived from the Millennium simulation semianalytic galaxy catalog based on a {Lambda} cold dark matter model. We find that the method is effective in reproducing the true projected radial satellite number density profile and luminosity distributions, providing confidence in the results derived from SDSS data. We find that the spatial extent of satellite systems is larger for bright, red primaries. Also, we find a larger spatial distribution of blue satellites. For the different samples analyzed, we derive the average number of satellites and their luminosity distributions down to M{sub r} = -14.5. The mean number of satellites depends very strongly on host luminosity. Bright primaries (M{sub r} < -21.5) host on average {approx}6 satellites with M{sub r} < -14.5. This number is reduced for primaries with lower luminosities (-21.5 < M{sub r} < -20.5) which have less than one satellite per host. We provide Schechter function fits to the luminosity distributions of satellite galaxies where the resulting faint-end slopes equal to 1.3 {+-} 0.2, consistent with the universal value. This shows that satellites of bright primaries lack an excess population of faint objects, in agreement with the results in the Milky Way and nearby galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

EXPLORATION OF SOURCE FREQUENCY PHASE REFERENCING TECHNIQUES FOR ASTROMETRY AND OBSERVATIONS OF WEAK SOURCES WITH HIGH FREQUENCY SPACE VERY LONG BASELINE INTERFEROMETRY

Space very long baseline interferometry (S-VLBI) observations at high frequencies hold the prospect of achieving the highest angular resolutions and astrometric accuracies, resulting from the long baselines between ground and satellite telescopes. Nevertheless, space-specific issues, such as limited accuracy in the satellite orbit reconstruction and constraints on the satellite antenna pointing operations, limit the application of conventional phase referencing. We investigate the feasibility of an alternative technique, source frequency phase referencing (SFPR), to the S-VLBI domain. With these investigations we aim to contribute to the design of the next generation of S-VLBI missions. We have used both analytical and simulation studies to characterize the performance of SFPR in S-VLBI observations, applied to astrometry and increased coherence time, and compared these to results obtained using conventional phase referencing. The observing configurations use the specifications of the ASTRO-G mission for their starting point. Our results show that the SFPR technique enables astrometry at 43 GHz, using alternating observations with 22 GHz, regardless of the orbit errors, for most weathers and under a wide variety of conditions. The same applies to the increased coherence time for the detection of weak sources. Our studies show that the capability to carry out simultaneous dual frequency observations enables application to higher frequencies, and a general improvement of the performance in all cases, hence we recommend its consideration for S-VLBI programs.

79 ASTRONOMY AND ASTROPHYSICS↗

A UNIFORM SEARCH FOR SECONDARY ECLIPSES OF HOT JUPITERS IN KEPLER Q2 LIGHT CURVES

In this paper, we present the results of searching the Kepler Q2 public data set for the secondary eclipses of 76 hot Jupiter planet candidates from the list of 1235 candidates published by Borucki et al. This search has been performed by modeling both the Kepler pre-search data conditioned light curves and new light curves produced via our own photometric pipeline. We derive new stellar and planetary parameters for each system, while calculating robust errors for both. We find 16 systems with 1{sigma}-2{sigma}, 14 systems with 2{sigma}-3{sigma}, and 6 systems with >3{sigma} confidence level secondary eclipse detections in at least one light curve produced via the Kepler pre-search data conditioned light curve or our own pipeline; however, results can vary depending on the light curve modeled and whether eccentricity is allowed to vary or not. We estimate false alarm probabilities of 31%, 10%, and 6% for the 1{sigma}-2{sigma}, 2{sigma}-3{sigma}, and >3{sigma} confidence intervals, respectively. Comparing each secondary eclipse result to theoretical expectations, we find that the majority of detected planet candidates emit more light than expected owing to thermal blackbody emission in the optical Kepler bandpass, and present a trend of increasing excess emission with decreasing maximum effective planetary temperature. These results agree with previously published optical secondary eclipse data for other hot Jupiters. We explore modeling biases, significant planetary albedos, non-local thermodynamic equilibrium or other thermal emission, significant internal energy generation, and misidentification of brown dwarfs, low-mass stars, or stellar blends as possible causes of both the excess emission and its correlation with expected planetary temperature. Although we find that no single cause is able to explain all of the planet candidates, significant planetary albedos, with a general trend of increasing planetary albedos with decreasing atmospheric temperatures, are able to explain most of the systems. Identifying systems that we deem likely to be low-mass stars or stellar blends, we estimate an 11% false-positive rate in the current Kepler planet candidate sample of hot Jupiters. We also establish robust upper limits on the eclipse depth for the remaining systems and find that the emission of a significant fraction of these systems is consistent with the planets having very low albedos, i.e., at least 30% of all systems have A{sub g} < 0.3 at 1{sigma} confidence levels. This result augments the current number of constrained exoplanetary albedos and extends the sample of low albedo determinations to planets with temperatures as low as 1200 K. Finally, we note that continued observations with the Kepler spacecraft and improved techniques for the removal of systematic noise in the Kepler data are needed to better characterize these systems.

79 ASTRONOMY AND ASTROPHYSICS↗

VARIABILITY FLAGGING IN THE WIDE-FIELD INFRARED SURVEY EXPLORER PRELIMINARY DATA RELEASE

The Wide-field Infrared Survey Explorer Preliminary Data Release Source Catalog contains over 257 million objects. We describe the method used to flag variable source candidates in the Catalog. Using a method based on the chi-square of single-exposure flux measurements, we generated a variability flag for each object, and have identified almost 460,000 candidate sources that exhibit significant flux variability with greater than {approx}7{sigma} confidence. We discuss the flagging method in detail and describe its benefits and limitations. We also present results from the flagging method, including example light curves of several types of variable sources including Algol-type eclipsing binaries, RR Lyr, W UMa, and a blazar candidate.

79 ASTRONOMY AND ASTROPHYSICS↗

SIMULATED LSST SURVEY OF RR LYRAE STARS THROUGHOUT THE LOCAL GROUP

We report on a study to determine the efficiency of the Large Synoptic Survey Telescope (LSST) to recover the periods, brightnesses, and shapes of RR Lyrae stars' light curves in the volume extending to heliocentric distances of 1.5 Mpc. We place the smoothed light curves of 30 type ab and 10 type c RR Lyrae stars in 1007 fields across the sky, each of which represents a different realization of the LSST sampling cadences, and that sample five particular observing modes. A light curve simulation tool was used to sample the idealized RR Lyrae stars' light curves, returning each as it would have been observed by LSST, including realistic photometric scatter, limiting magnitudes, and telescope downtime. We report here the period, brightness, and light curve shape recovery as a function of apparent magnitude and for survey lengths varying from 1 to 10 years. We find that 10 years of LSST data are sufficient to recover the pulsation periods with a fractional precision of {approx}10{sup -5} for {>=}90% of ab stars within Almost-Equal-To 360 kpc of the Sun in Universal Cadence fields and out to Almost-Equal-To 760 kpc for Deep Drilling fields. The 50% completeness level extends to Almost-Equal-To 600 kpc and Almost-Equal-To 1.0 Mpc for the same fields, respectively. For virtually all stars that had their periods recovered, their light curve shape parameter {phi}{sub 31} was recovered with sufficient precision to also recover photometric metallicities to within 0.14 dex (the systematic error in the photometric relations). With RR Lyrae stars' periods and metallicities well measured to these distances, LSST will be able to search for halo streams and dwarf satellite galaxies over half of the Local Group, informing galaxy formation models and providing essential data for mapping the Galactic potential. This study also informs the LSST science operations plan for optimizing observing strategies to achieve particular science goals. We additionally present a new [Fe/H]-{phi}{sub 31} photometric relation in the r band and a new and generally useful metric for defining period recovery for time domain surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

CARBON-ENHANCED METAL-POOR STARS IN SDSS/SEGUE. I. CARBON ABUNDANCE ESTIMATION AND FREQUENCY OF CEMP STARS

We describe a method for the determination of stellar [C/Fe] abundance ratios using low-resolution (R = 2000) stellar spectra from the Sloan Digital Sky Survey (SDSS) and its Galactic sub-survey, the Sloan Extension for Galactic Understanding and Exploration (SEGUE). By means of a star-by-star comparison with a set of SDSS/SEGUE spectra with available estimates of [C/Fe] based on published high-resolution analyses, we demonstrate that we can measure [C/Fe] from SDSS/SEGUE spectra with S/N ≥ 15 Å{sup –1} to a precision better than 0.35 dex for stars with atmospheric parameters in the range T {sub eff} = [4400, 6700] K, log g = [1.0, 5.0], [Fe/H] = [–4.0, +0.5], and [C/Fe] = [–0.25, +3.5]. Using the measured carbon-to-iron abundance ratios obtained by this technique, we derive the frequency of carbon-enhanced stars ([C/Fe] ≥ +0.7) as a function of [Fe/H], for both the SDSS/SEGUE stars and other samples from the literature. We find that the differential frequency slowly rises from almost zero to about 14% at [Fe/H] ∼ –2.4, followed by a sudden increase, by about a factor of three, to 39% from [Fe/H] ∼ –2.4 to [Fe/H] ∼ –3.7. Although the number of stars known with [Fe/H] < –4.0 remains small, the frequency of carbon-enhanced metal-poor (CEMP) stars below this value is around 75%. We also examine how the cumulative frequency of CEMP stars varies across different luminosity classes. The giant sample exhibits a cumulative CEMP frequency of 32% for [Fe/H] ≤ –2.5, 31% for [Fe/H] ≤ –3.0, and 33% for [Fe/H] ≤ –3.5; a roughly constant value. For the main-sequence turnoff stars, we obtain a lower cumulative CEMP frequency, around 10% for [Fe/H] ≤ –2.5, presumably due to the difficulty of identifying CEMP stars among warmer turnoff stars with weak CH G-bands. The dwarf population displays a large change in the cumulative frequency for CEMP stars below [Fe/H] = –2.5, jumping from 15% for [Fe/H] ≤ –2.5 to about 75% for [Fe/H] ≤ –3.0. When we impose a restriction with respect to distance from the Galactic mid-plane (|Z| < 5 kpc), the frequency of the CEMP giants does not increase at low metallicity ([Fe/H] < –2.5), but rather decreases due to the dilution of C-rich material in stars that have undergone mixing with CNO-processed material from their interiors. The frequency of CEMP stars near the main-sequence turnoff, which are not expected to have experienced mixing, increases for [Fe/H] ≤ –3.0. The general rise in the global CEMP frequency at low metallicity is likely due to the transition from the inner-halo to the outer-halo stellar populations with declining metallicity and increasing distance from the plane.

79 ASTRONOMY AND ASTROPHYSICS↗

Demographics of Sloan digital sky survey galaxies along the Hubble sequence

We present the statistical properties of a volume-limited sample of 7429 nearby (z = 0.033-0.044) galaxies from the Sloan Digital Sky Survey Data Release 7. Our database includes morphology distribution as well as the structural and spectroscopic properties of each morphology type based on the recent remeasurements of spectral line strengths by Oh and collaborators. Our database does not include galaxies that are apparently smaller and flatter because morphology classification of them turned out to be difficult. Our statistics confirmed the up-to-date knowledge of galaxy populations, e.g., correlations between morphology and line strengths as well as the derived ages. We hope that this database will be useful as a reference.

79 ASTRONOMY AND ASTROPHYSICS↗

SELF-CONSISTENT ORBITS AND PHYSICAL PROPERTIES FOR EIGHT SINGLE-LINED SPECTROSCOPIC BINARIES

For single-lined spectroscopic binaries (SB1s), self-consistent orbits can be determined via a simultaneous fit including both radial velocity data and the Hipparcos Intermediate Astrometric Data. Using the ratio λ of the semimajor axes of the photocenter to the primary orbits, the present paper develops an iterative fitting method. First, an initial orbit of an SB1 is determined with the assumption that λ equals 1. On the basis of this orbit, we use a stellar evolutionary model to distribute the total mass and luminosity to the primary and the secondary and update λ from the component mass and luminosity ratios. Then the orbit is updated using the updated value of λ, which completes a step of the iterative process. If this process is convergent, the resulting orbit is compatible with the physical properties of component stars. By using this method, the orbital solutions of eight SB1s as well as the physical properties are determined. We find that the component magnitude differences of these systems are very large, except for HIP 7143 and 45333. This suggests that only the secondaries of the two systems can be resolved with the present-day observational techniques, which is in agreement with recent observations.

79 ASTRONOMY AND ASTROPHYSICS↗

PRECISION MEASUREMENTS OF THE CLUSTER RED SEQUENCE USING AN ERROR-CORRECTED GAUSSIAN MIXTURE MODEL

The red sequence is an important feature of galaxy clusters and plays a crucial role in optical cluster detection. Measurement of the slope and scatter of the red sequence are affected both by selection of red sequence galaxies and measurement errors. In this paper, we describe a new error-corrected Gaussian Mixture Model for red sequence galaxy identification. Using this technique, we can remove the effects of measurement error and extract unbiased information about the intrinsic properties of the red sequence. We use this method to select red sequence galaxies in each of the 13,823 clusters in the maxBCG catalog, and measure the red sequence ridgeline location and scatter of each. These measurements provide precise constraints on the variation of the average red galaxy populations in the observed frame with redshift. We find that the scatter of the red sequence ridgeline increases mildly with redshift, and that the slope decreases with redshift. We also observe that the slope does not strongly depend on cluster richness. Using similar methods, we show that this behavior is mirrored in a spectroscopic sample of field galaxies, further emphasizing that ridgeline properties are independent of environment. These precise measurements serve as an important observational check on simulations and mock galaxy catalogs. The observed trends in the slope and scatter of the red sequence ridgeline with redshift are clues to possible intrinsic evolution of the cluster red sequence itself. Most importantly, the methods presented in this work lay the groundwork for further improvements in optically based cluster cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗

A GROUP FINDING ALGORITHM FOR MULTIDIMENSIONAL DATA SETS

We describe a density-based hierarchical group finding algorithm capable of identifying structures and substructures of any shape and density in multidimensional data sets where each dimension can be a numeric attribute with arbitrary measurement scale. This has applications in a wide variety of fields from finding structures in galaxy redshift surveys, to identifying halos and subhalos in N-body simulations and group finding in Local Group chemodynamical data sets. In general, clustering schemes require an a priori definition of a metric (a non-negative function that gives the distance between two points in a space) and the quality of clustering depends upon this choice. The general practice is to use a constant global metric which is optimal only if the clusters in the data are self-similar. For complex data configurations even the most finely tuned constant global metric turns out to be suboptimal. Moreover, the correct choice of metric also becomes increasingly important as the number of dimensions increase. To address these problems, we present an entropy-based binary space partitioning algorithm which uses a locally adaptive metric for each data point. The metric is employed to calculate the density at each point and a list of its nearest neighbors, and this information is then used to form a hierarchy of groups. Finally, the ratio of maximum to minimum density of points in a group is used to estimate the significance of the groups. Setting a threshold on this significance can effectively screen out groups arising due to Poisson noise and helps organize the groups into meaningful clusters. For a data set of N points, the algorithm requires only O(N) space and O(N(log N){sup 3}) time which makes it ideally suitable for analyzing large data sets. As an example, we apply the algorithm to identify structures in a simulated stellar halo using the full six-dimensional phase space coordinates.

79 ASTRONOMY AND ASTROPHYSICS↗

IMPROVEMENT OF THE RICHNESS ESTIMATES OF maxBCG CLUSTERS

Minimizing the scatter between cluster mass and accessible observables is an important goal for cluster cosmology. In this work, we introduce a new matched filter richness estimator, and test its performance using the maxBCG cluster catalog. Our new estimator significantly reduces the variance in the L{sub X} -richness relation, from sigma{sub lnLx}{sup 2} = (0.86+-0.02){sup 2} to sigma{sub lnLx}{sup 2} = (0.69+-0.02){sup 2}. Relative to the maxBCG richness estimate, it also removes the strong redshift dependence of the L{sub X} -richness scaling relations, and is significantly more robust to photometric and redshift errors. These improvements are largely due to the better treatment of galaxy color data. We also demonstrate the scatter in the L{sub X} -richness relation depends on the aperture used to estimate cluster richness, and introduce a novel approach for optimizing said aperture which can easily be generalized to other mass tracers.

79 ASTRONOMY AND ASTROPHYSICS↗

IMPACTS OF SOURCE PROPERTIES ON STRONG LENSING BY RICH GALAXY CLUSTERS

We use a high-resolution N-body simulation to investigate the influence of background galaxy properties, including redshift, size, shape, and clustering, on the efficiency of forming giant arcs by gravitational lensing of rich galaxy clusters. Two large sets of ray-tracing simulations are carried out for 10 massive clusters at two redshifts, i.e., z {sub l} approx 0.2 and 0.3. The virial mass (M {sub vir}) of the simulated lens clusters at z approx 0.2 ranges from 6.8 x 10{sup 14} h {sup -1} M {sub sun} to 1.1 x 10{sup 15} h {sup -1} M {sub sun}. The information of background galaxies brighter than 25 mag in the I-band is taken from the Cosmological Evolution Survey (COSMOS) imaging data. Around 1.7 x 10{sup 5} strong lensing realizations with these images as background galaxies have been performed for each set. We find that the efficiency for forming giant arcs for z {sub l} = 0.2 clusters is broadly consistent with observations. Our study on control source samples shows that the number of giant arcs is decreased by a factor of 1.05 and 1.61 when the COSMOS redshift distribution of galaxies is adopted, compared to the cases where all the galaxies were assumed to be in a single source plane at z {sub l} = 1.0 and z {sub l} = 1.5, respectively. We find that the efficiency of producing giant arcs by rich clusters is weakly dependent on the source size and clustering. Our principal finding is that a small proportion (approx1/3) of galaxies with elongated shapes (e.g., ellipticity epsilon = 1 - b/a > 0.5) can boost the number of giant arcs substantially. Compared with recent studies where a uniform ellipticity distribution from 0 to 0.5 is used for the sources, the adoption of directly observed shape distribution increases the number of giant arcs by a factor of approx2. Our results indicate that it is necessary to account for source information and survey parameters (such as point-spread function, seeing) to make correct predictions of giant arcs and further to constrain the cosmological parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

SIGNIFICANT FOREGROUND UNRELATED NON-ACOUSTIC ANISOTROPY ON THE 1 DEGREE SCALE IN WILKINSON MICROWAVE ANISOTROPY PROBE 5-YEAR OBSERVATIONS

The spectral variation of the cosmic microwave background (CMB) as observed by WMAP was tested using foreground reduced WMAP5 data, by producing subtraction maps at the 1 deg. angular resolution between the two cosmological bands of V and W, for masked sky areas that avoid the Galactic disk. The resulting V - W map revealed a non-acoustic signal over and above the WMAP5 pixel noise, with two main properties. First, it possesses quadrupole power at the approx1 muK level which may be attributed to foreground residuals. Second, it fluctuates also at all values of l> 2, especially on the 1 deg. scale (200 approx< l approx< 300). The behavior is random and symmetrical about zero temperature with an rms approx7 muK, or 10% of the maximum CMB anisotropy, which would require a 'cosmic conspiracy' among the foreground components if it is a consequence of their existence. Both anomalies must be properly diagnosed and corrected if 'precision' cosmology is the claim. The second anomaly is, however, more interesting because it opens the question on whether the CMB anisotropy genuinely represents primordial density seeds.

79 ASTRONOMY AND ASTROPHYSICS↗

RANDOM FORESTS FOR PHOTOMETRIC REDSHIFTS

The main challenge today in photometric redshift estimation is not in the accuracy but in understanding the uncertainties. We introduce an empirical method based on Random Forests to address these issues. The training algorithm builds a set of optimal decision trees on subsets of the available spectroscopic sample, which provide independent constraints on the redshift of each galaxy. The combined forest estimates have intriguing statistical properties, notable among which are Gaussian errors. We demonstrate the power of our approach on multi-color measurements of the Sloan Digital Sky Survey.

79 ASTRONOMY AND ASTROPHYSICS↗

A NEW GALACTIC EXTINCTION MAP OF THE CYGNUS REGION

We have made a Galactic extinction map of the Cygnus region with 5' spatial resolution. The selected area is 80{sup 0} to 90{sup 0} in the Galactic longitude and -4{sup 0} to 8{sup 0} in the Galactic latitude. The intensity at 140 {mu}m is derived from the intensities at 60 and 100 {mu}m of the IRAS data using the tight correlation between 60, 100, and 140 {mu}m found in the Galactic plane. The dust temperature and optical depth are calculated with 5' resolution from the 140 and 100 {mu}m intensity, and A{sub V} is calculated from the optical depth. In the selected area, the mean dust temperature is 17 K, the minimum is 16 K, and the maximum is 30 K. The mean A{sub V} is 6.5 mag, the minimum is 0.5 mag, and the maximum is 11 mag. The dust temperature distribution shows significant spatial variation on smaller scales down to 5'. Because the present study can trace the 5'-scale spatial variation of the extinction, it has an advantage over the previous studies, such as the one by Schlegel, Finkbeiner, and Davis, who used the COBE/DIRBE data to derive the dust temperature distribution with a spatial resolution of 1{sup 0}. The difference of A{sub V} between our map and Schlegel et al.'s is {+-} 3 mag. A new extinction map of the entire sky can be produced by applying the present method.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗