Search NASA⌕ Search

SEARCH · Search NASA

Results for “automatic generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

pyscan-tlk

SAND2024-13867O pyscan-tlk software provides straight-forward access to control Thorlabs brand instruments with python. C bindings and python wrappers are generated and automatically based on text parsing the C documentation. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Mounce, Andrew↗
DOE OSTI2026

Simulation-Based Validation of An Open-Source, Scalable Framework for Building Energy Management in Small and Medium-Sized Commercial Buildings

Abstract: Small and medium-sized commercial buildings (SMCBs) represent 94% of U.S. commercial buildings but encounter substantial obstacles in adopting Building Energy Management (BEM) systems. Current approaches exhibit fundamental limitations: vendor-specific API platforms restrict interoperability through proprietary ecosystems; commercial automation software demands extensive technical expertise and licensing costs; open-source IoT solutions lack native support for building automation protocols and semantic models. This paper introduces a configuration-driven web interface framework addressing the gap between smart device advancements and accessible BEM software infrastructure for SMCBs. The framework leverages VOLTTRON middleware integrated with an automated converter that processes unified YAML configurations into heterogeneous system files, reducing required configuration artifacts from six separate files to a single unified specification. The system architecture enables vendor-agnostic operation through BACnet and Modbus protocols while supporting semantic building model integration via automated Brick Schema parsing. Configuration-driven interfaces automatically adapt to diverse HVAC types without custom development. Simulation-based validation using BOPTEST demonstrates automatic interface generation between fan coil and hydronic systems, with the automated converter successfully generating all platform-specific outputs from the single YAML input. The result demonstrates the framework's capability to streamline BEM system deployment through reduced configuration complexity. This work bridges simulation capabilities with operational deployment, demonstrating how virtual testbeds validate generalizable software frameworks for real-world building automation.

Chung, Jihoon [ORNL] (ORCID:0000000184880815)↗
NASA NTRS1976

Calculation of the three-dimension, supersonic, inviscid, steady flow past an arrow-winged airframe, part 1

A detailed description of the procedure used to compute three dimensional, supersonic, inviscid, steady flows past airframes is given. No limitations are imposed on the geometry of the airplane. Suitable computational grids are generated by automatic conformal mappings. The equations of motion, with pressure, entropy, and velocity direction as basic unknowns, are written and discretized in the computational space. Special rules to approximate derivatives are given. Boundary points are treated by a modified method of characteristics.

Moretti, G.↗
NASA NTRS1976

A finite element solution of unsteady transonic flow problems for three-dimensional wings and bodies

A computerized finite element method has been developed to solve a form of the three-dimensional inviscid, irrotational unsteady transonic equation for pointed and rectangular wings and wing-body combinations. The equation is a 'parabolized' version of the full unsteady transonic equation which includes the effect of the advancing wave and the acceleration in the steady flow field thus including a thickness effect. Automatic mesh generation using conformal mapping has the advantage of allowing relatively arbitrary cross-sections to be closely approximated while taking advantage of the body's similarity to a more simple configuration. Plunge, pitch, and roll modes are computed

Kimble, K. R.↗
NASA NTRS1977

Boundary-fitted curvilinear coordinate systems for solution of partial differential equations on fields containing any number of arbitrary two-dimensional bodies

A method is presented for automatic numerical generation of a general curvilinear coordinate system with coordinate lines coincident with all boundaries of a general multi-connected two-dimensional region containing any number of arbitrarily shaped bodies. No restrictions are placed on the shape of the boundaries, which may even be time-dependent, and the approach is not restricted in principle to two dimensions. With this procedure the numerical solution of a partial differential system may be done on a fixed rectangular field with a square mesh with no interpolation required regardless of the shape of the physical boundaries, regardless of the spacing of the curvilinear coordinate lines in the physical field, and regardless of the movement of the coordinate system in the physical plane. A number of examples of coordinate systems and application thereof to the solution of partial differential equations are given. The FORTRAN computer program and instructions for use are included.

Thompson, J. F.↗
NASA NTRS1977

Implicit finite difference simulation of flow about arbitrary geometries with application to airfoils

Finite difference procedures are used to solve either the Euler equations or the 'thin layer' Navier-Stokes equations subject to arbitrary boundary conditions. An automatic grid generation program is employed, and because an implicit finite difference algorithm for the flow equations is used, time steps are not severely limited when grid points are finely distributed. Computational efficiency and compatibility to vectorized computer processors is maintained by use of approximate factorization techniques. Computed results for both inviscid and viscous flow about airfoils are described and compared to various known solutions.

Steger, J. L.↗
NASA NTRS1977

Numerical solutions for viscous and potential flow about arbitrary two-dimensional bodies using body-fitted coordinate systems

A procedure for numerical solution of the time-dependent, incompressible Navier-Stokes equations for the flow about arbitrarily shaped two-dimensional bodies is given. This solution is based on a technique of automatic numerical generation of a curvilinear coordinate system having a coordinate line coincident with the body contour regardless of its shape. The implicit solution utilizes the vorticity-stream function formulation with a false-position iterative adjustment of the surface vorticity in satisfaction of the no-slip boundary condition. Excellent agreement with the Blasius boundary layer solution is obtained for a semi-infinite flat plate. Results are presented for Reynolds numbers up to 2000 for several airfoils and a cambered rock.

Thames, F. C.↗
NASA NTRS1978

Alternatives for jet engine control

General goals of the research were classified into two categories. The first category involves the use of modern multivariable frequency domain methods for control of engine models in the neighborhood of a quiescent point. The second category involves the use of nonlinear modelling and optimization techniques for control of engine models over a more extensive part of the flight envelope. In the frequency domain category, works were published in the areas of low-interaction design, polynomial design, and multiple setpoint studies. A number of these ideas progressed to the point at which they are starting to attract practical interest. In the nonlinear category, advances were made both in engine modelling and in the details associated with software for determination of time optimal controls. Nonlinear models for a two spool turbofan engine were expanded and refined; and a promising new approach to automatic model generation was placed under study. A two time scale scheme was developed to do two-dimensional dynamic programming, and an outward spiral sweep technique has greatly speeded convergence times in time optimal calculations.

Leake, R. J.↗
NASA NTRS1980

Driver for solar cell I-V characteristic plots

A bipolar voltage ramp generator which applies a linear voltage through a resistor to a solar cell for plotting its current versus voltage (I-V) characteristic between short circuit and open circuit conditions is disclosed. The generator has automatic stops at the end points. The resistor serves the multiple purpose of providing a current sensing resistor, setting the full-scale current value, and providing a load line with a slope approximately equal to one, such that it will pass through the origin and the approximate center of the I-V curve with about equal distance from that center to each of the end points.

Turner, G. B.↗
NASA NTRS1980

An implicit finite-difference code for inviscid and viscous cascade flow

An implicit finite-difference code is developed to solve either inviscid or viscous flow about two-dimensional cascade blade elements. General coordinate transformations are used so that boundaries can coincide with coordinate lines, and an automatic grid generation routine based on elliptic partial differential equations is employed to mesh arbitrary cascade elements. Characteristic combinations of the differential equations are used at inflow and outflow boundaries. Computed results for both inviscid and viscous flow are compared with other existing cascade solutions and experimental data.

Steger, J. L.↗
NASA NTRS1978

C-MOS array design techniques

The entire complement of standard cells and components, except for the set-reset flip-flop, was completed. Two levels of checking were performed on each device. Logic cells and topological layout are described. All the related computer programs were coded and one level of debugging was completed. The logic for the test chip was modified and updated. This test chip served as the first test vehicle to exercise the standard cell complementary MOS(C-MOS) automatic artwork generation capability.

Feller, A.↗
NASA NTRS1982

Numerical solution of potential flow about arbitrary 2-dimensional multiple bodies

A procedure for the finite-difference numerical solution of the lifting potential flow about any number of arbitrarily shaped bodies is given. The solution is based on a technique of automatic numerical generation of a curvilinear coordinate system having coordinate lines coincident with the contours of all bodies in the field, regardless of their shapes and number. The effects of all numerical parameters involved are analyzed and appropriate values are recommended. Comparisons with analytic solutions for single Karman-Trefftz airfoils and a circular cylinder pair show excellent agreement. The technique of application of the boundary-fitted coordinate systems to the numerical solution of partial differential equations is illustrated.

Thompson, J. F.↗
NASA NTRS1981

Trends and pacing items in computational aerodynamics

A perspective is presented of trends in computational aerodynamics, and of important technology development items that pace future advanced applications. From a survey of AIAA Journal papers published during the past two decades, the growth trends and the progressively increasing emphasis on code development for viscous, compressible, turbulent flow are illustrated. These trends are reflected in the chronology of introduction by the aerospace industry of new computational methods in aircraft design. Key pacing items outlined are: automatic grid generation for nonlinear inviscid computations; advanced computers, improved efficiency of numerical methods, and improved turbulence models for Reynolds-averaged Navier-Stokes computations; advanced computers, time-dependent three-dimensional law-of-the-wall, code development, improved efficiency of numerical methods, and improved subgrid-scale turbulence modeling for large eddy simulations.

Chapman, D. R.↗
NASA NTRS1982

A 400-kWe high-efficiency steam turbine for industrial cogeneration

An advanced state-of-the-art steam turbine-generator developed to serve as the power conversion subsystem for the Department of Energy's Sandia National Laboratories' Solar Total-Energy Project (STEP) is described. The turbine-generator, which is designed to provide 400-kW of net electrical power, represents the largest turbine-generator built specifically for commercial solar-powered cogeneration. The controls for the turbine-generator incorporate a multiple, partial-arc entry to provide efficient off-design performance, as well as an extraction control scheme to permit extraction flow regulation while maintaining 110-spsig pressure. Normal turbine operation is achieved while synchronized to a local utility and in a stand-alone mode. In both cases, the turbine-generator features automatic load control as well as remote start-up and shutdown capability. Tests totaling 200 hours were conducted to confirm the integrity of the turbine's mechanical structure and control function. Performance tests resulted in a measured inlet throttle flow of 8,450 pounds per hour, which was near design conditions.

Leibowitz, H. M.↗
NASA NTRS1983

Advanced earth observation spacecraft computer-aided design software: Technical, user and programmer guide

The IDEAS computer of NASA is a tool for interactive preliminary design and analysis of LSS (Large Space System). Nine analysis modules were either modified or created. These modules include the capabilities of automatic model generation, model mass properties calculation, model area calculation, nonkinematic deployment modeling, rigid-body controls analysis, RF performance prediction, subsystem properties definition, and EOS science sensor selection. For each module, a section is provided that contains technical information, user instructions, and programmer documentation.

Farrell, C. E.↗
NASA NTRS1986

Unsteady transonic flows past airfoils using the Euler equations

An explicit finite difference solver for the Euler equations was developed and used to calculate the flow past two of the AGARD standard aeroelastic configurations, an NACA 64A010 and an NLR 7301. The algorithm employed uses a modified four step Runge-Kutta time stepping scheme, boundary conditions determined from the time-dependent theory of characteristics and an unsteady automatic grid generation procedure. In general, the calculated results are in good agreement with available experiment. Moreover, they demonstrate the importance of using the Euler equations for super-critical airfoils and in situations where the transonic small disturbance theory results in poor agreement with experiment.

Smith, G. E.↗
NASA NTRS1987

Adaptive finite difference methods in fluid dynamics

An adaptive method to solve partial differential equations in fluid mechanics is presented. The approach requires internal boundary conditions that must be conservative, data structures for keeping track of several layers of fine grid patches, error estimation, and heuristics for automatic grid generation. In practical calculations gains in computer efficiency up to 10 over nonadaptive methods are observed. The whole procedure takes 3000 lines of FORTRAN code.

Berger, Marsha J.↗