Search NASA⌕ Search

SEARCH · Search NASA

Results for “cathode utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Microbial Photoelectrosynthesis for Self-Sustaining Hydrogen Generation

Current artificial photosynthesis (APS) systems are promising for the storage of solar energy via transportable and storable fuels, but the anodic half-reaction of water oxidation is an energy intensive process which in many cases poorly couples with the cathodic half-reaction. Here in this paper, we demonstrate a self-sustaining microbial photoelectrosynthesis (MPES) system that pairs microbial electrochemical oxidation with photoelectrochemical water reduction for energy efficient H 2 generation. MPES reduces the overall energy requirements thereby greatly expanding the range of semiconductors that can be utilized in APS. Due to the recovery of chemical energy from waste organics by the mild microbial process and utilization of cost-effective and stable catalyst/electrode materials, our MPES system produced a stable current of 0.4 mA/cm 2 for 24 h without any external bias and ~10 mA/cm 2 with a modest bias under one sun illumination. Finally, this system also showed other merits, such as creating benefits of wastewater treatment and facile preparation and scalability.

08 HYDROGEN↗

Ion-Sieving Carbon Nanoshells for Deeply Rechargeable Zn-Based Aqueous Batteries

As an alternative to lithium-ion batteries, Zn-based aqueous batteries feature nonflammable electrolytes, high theoretical energy density, and abundant materials. However, a deeply rechargeable Zn anode in lean electrolyte configuration is still lacking. Different from the solid-to-solid reaction mechanism in lithium-ion batteries, Zn anodes in alkaline electrolytes go through a solid-solute-solid mechanism (Zn-Zn(OH) 4 2- -ZnO), which introduces two problems. First, discharge product ZnO on the surface prevents further reaction of Zn underneath, which leads to low utilization of active material and poor rechargeability. Second, soluble intermediates change Zn anode morphology over cycling. In this work, an ion-sieving carbon nanoshell coated ZnO nanoparticle anode is reported, synthesized in a scalable way with controllable shell thickness, to solve the problems of passivation and dissolution simultaneously. The nanosized ZnO prevents passivation, while microporous carbon shell slows down Zn species dissolution. Under extremely harsh testing conditions (closed cell, lean electrolyte, no ZnO saturation), this Zn anode shows significantly improved performance compared to Zn foil and bare ZnO nanoparticles. The deeply rechargeable Zn anode reported is an important step toward practical high-energy rechargeable aqueous batteries (e.g., Zn-air batteries). And the ion-sieving nanoshell concept demonstrated is potentially beneficial to other electrodes such as sulfur cathode for Li-S batteries.

catalysis (heterogeneous), defects, membrane, carb↗

Achieving Highly Reproducible Results in Graphite-based Li-ion Full Coin Cells

Electrode materials, cathodes or anodes, are mostly evaluated in half coin cells where lithium (Li) metal is used. However, due to the instability nature of Li metal, the cycling performances of the half cells is more likely reflecting Li anode stability instead of the coupled electrodes, questioning the conclusions. Full coin cells utilizing graphite as the anode effectively assesses materials. But the key factors of preparing full coin cells with reproducible performances have rarely been discussed and overlooked leading to many inconsistent results. This work discusses the scientific gap between cell preparation and observed electrochemical performances to unveil the key parameters for achieving consistent and reliable results in full coin cells, critical for effective evaluation of any new materials tested under relevant conditions. The knowledge from this work is broadly applicable in other full cells systems such as Si-based full cells or Na-ion batteries.

Hu, Jiangtao↗

Engineering Heteromaterials to Control Lithium Ion Transport Pathways

Safe and efficient operation of lithium ion batteries requires precisely directed flow of lithium ions and electrons to control the first directional volume changes in anode and cathode materials. Understanding and controlling the lithium ion transport in battery electrodes becomes crucial to the design of high performance and durable batteries. Recent work revealed that the chemical potential barriers encountered at the surfaces of heteromaterials play an important role in directing lithium ion transport at nanoscale. Here, we utilize in situ transmission electron microscopy to demonstrate that we can switch lithiation pathways from radial to axial to grain-by-grain lithiation through the systematic creation of heteromaterial combinations in the Si-Ge nanowire system. Lastly, our systematic studies show that engineered materials at nanoscale can overcome the intrinsic orientation-dependent lithiation, and open new pathways to aid in the development of compact, safe, and efficient batteries.

36 MATERIALS SCIENCE↗

Synthesis of single and multi unit-wall MgB{sub 2} nanotubes by arc plasma in inert liquid via self-curling mechanism

Magnesium diboride (MgB{sub 2}) is known as a promising superconductor due to its high transmission temperature. Similarly to single-wall carbon nanotube, unique characteristics would be seen if a nanotube structure of MgB{sub 2} having a unit-wall of Mg and B atomic bilayer is prepared. However, such MgB{sub 2} nanotubes have not ever been synthesized. In this article, formation mechanism of unit-wall MgB{sub 2} nanotube is elucidated by molecular mechanics calculation. From the viewpoint of energetic stability, the unit-wall will be curled up to form nanotube structure when MgB{sub 2} crystal is disassembled to an isolated unit-wall layer. An experiment using arc plasma in inert liquid was utilized to produce unit-wall MgB{sub 2} nanotubes. As a result, a single and multiunit-wall MgB{sub 2} nanotube was successfully synthesized. In this reaction field, the arc plasma may play a role to produce isolated MgB{sub 2} unit-wall fragment, and the cold cathode surface can contribute to preserve MgB{sub 2} nanotube structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of Interaction between Fe‐Infiltrates and LSM Backbone in Solid Oxide Fuel Cells

In this paper, detailed materials characterization analyses on the interaction between FeO x nanoparticles infiltrated onto a La 0.8 Sr 0.2 MnO 3 (LSM) backbone cathode in a solid oxide fuel cell (SOFC) are reported. The infiltration process leads to an increase of 3.4% in cell performance. X‐ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) as well as energy dispersive X‐ray spectroscopy (EDS) and electron energy loss spectroscopy (EELS) are utilized to perform a comprehensive examination of the microstructure and chemical properties at the interface of the infiltrate and backbone materials. Mn from the LSM backbone diffuses into the FeO x infiltrate and forms a Fe‐Mn‐O spinel. A small amount of Fe also diffuses into the LSM backbone, which could partially be responsible for the enhanced performance of the cell. The valence state of Mn increases from the surface of the Fe‐Mn‐O particle into bulk LSM, with the highest value being at the interface of the Fe‐Mn‐O/LSM backbone. Possible mechanisms are discussed for the change in Mn valence state within the LSM phase. Trace amounts of Mn and La are found in the YSZ phase, as a result of interdiffusion between LSM and YSZ.

Yu, Yang↗

All-in-one bipolar electrode: A new concept for compact and efficient water electrolyzers

Highly compact and efficient proton exchange membrane electrolyzer cells (PEMECs) are strongly desired for commercializing hydrogen production. Here, a novel concept of all-in-one bipolar electrode (AIOBE) is proposed for high-efficiency and compact PEMECs with the help of 3D printing and sputtering coating. AIOBE ideally integrated catalyst layer (CL)/gas diffusion layer/bipolar plate/current distributor/gasket, which significantly reduced component quantity on the cathode side of PEMECs from 5 to 1, cut down on part weight and volume, and drastically accelerated the fabrication and maintenance processes. Moreover, AIOBE with the micro-scale flat surface and nano-scale rough CL provided an ultralow ohmic resistance (~100 mOhm cm 2 ) and a high catalyst utilization. Finally, AIOBE delivered a practical voltage of 1.62 V and a high energy efficiency of 91% at 1000 mA/cm 2 , and its mass activity (4.48 A/mg Pt ) was 14 times higher than conventional PEMECs. In conclusion, this work provides a new route for developing highly compact electrochemical devices, such as fuel cells, electrolyzers for N 2 reduction and CO 2 conversion, and many more.

3D printing↗

Towards Understanding of Cracking during Drying of Thick Aqueous-Processed LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathodes

Replacing N-methyl-2-pyrrolidone (NMP) with water for processing of lithium-ion battery (LIB) electrodes has both cost and environmental benefits, which include reduced drying time, lower dryer capital cost, elimination of NMP recovery capital equipment, and no release of volatile organic compounds (VOCs) into the environment. However, aqueous-processed thick cathodes (≳4 mAh/cm 2 ) typically exhibit detrimental cracking during drying that is not observed for the NMP-based counterpart. The reasons for cracking of these water-based thick electrodes are still not well understood due to the complex nature of the colloidal dispersions used in the LIB electrode processing steps. In this work, the contributions of various factors responsible for cracking are discussed. We show that eliminating hydrogen evolution due to corrosion of the aluminum current collector eliminated the majority of the cracks regardless of the coating thickness, identifying the gas evolution as the primary reason for electrode cracking. Some secondary cracks and pinhole-type defects remained after addressing the aluminum current collector corrosion, which are thought to be caused by an inferior binding network formed by carbon black and binder in aqueous-processed cathodes compared to those processed with NMP. The thick aqueous processed cathodes are not able to sufficiently withstand the drying stresses without crack formation. We demonstrate reduction of these secondary defects by either improving the binding network or by reducing the drying stress. The former was achieved by replacing carbon black with vapor grown graphite tubes (VGGTs) that caused a more efficient utilization of the emulsion binder. Here, the latter was achieved by adding a small amount of IPA as a co-solvent that has been shown to reduce capillary stresses.

25 ENERGY STORAGE↗

Combustion Synthesis of Nanoparticulate LiMgxMn1-xPO4 (x=0, 0.1, 0.2) Carbon Composites

A combustion synthesis technique was used to prepare nanoparticulate LiMgxMn1-xPO4 (x=0, 0.1,0.2)/carbon composites. Powders consisted of carbon-coated particles about 30 nm in diameter, which were partly agglomerated into larger secondary particles. The utilization of the active materials in lithium cells depended most strongly upon the post-treatment and the Mg content, and was not influenced by the amount of carbon. Best results were achieved with a hydrothermally treated LiMg0.2Mn0.8PO4/C composite, which exhibited close to 50percent utilization of the theoretical capacity at a C/2 discharge rate.

25 ENERGY STORAGE↗

Nanocomposite battery electrode particles with changing properties

Battery electrode compositions and methods of fabrication are provided that utilize composite particles. Each of the composite particles may comprise, for example, a high-capacity active material and a porous, electrically-conductive scaffolding matrix material. The active material may store and release ions during battery operation, and may exhibit (i) a specific capacity of at least 220 mAh/g as a cathode active material or (ii) a specific capacity of at least 400 mAh/g as an anode active material. The active material may be disposed in the pores of the scaffolding matrix material. According to various designs, each composite particle may exhibit at least one material property that changes from the center to the perimeter of the scaffolding matrix material.

Yushin, Gleb↗

Nanocomposite battery electrode particles with changing properties

Battery electrode compositions and methods of fabrication are provided that utilize composite particles. Each of the composite particles may comprise, for example, a high-capacity active material and a porous, electrically-conductive scaffolding matrix material. The active material may store and release ions during battery operation, and may exhibit (i) a specific capacity of at least 220 mAh/g as a cathode active material or (ii) a specific capacity of at least 400 mAh/g as an anode active material. The active material may be disposed in the pores of the scaffolding matrix material. According to various designs, each composite particle may exhibit at least one material property that changes from the center to the perimeter of the scaffolding matrix material.

Yushin, Gleb↗

Targeted electrochemical reduction of carcinogenic N -nitrosamines from emission control systems within CO 2 capture plants

N-Nitrosamines are one of the environmentally significant byproducts from aqueous amine-based post-combustion carbon capture systems (CCS) due to their potential risk to human health. Safely mitigating nitrosamines before they are emitted from these CO 2 capture systems is therefore a key concern before widescale deployment of CCS can be used to address worldwide decarbonization goals. Electrochemical decomposition is one viable route to neutralize these harmful compounds. The circulating emission control waterwash system, commonly installed at the end of the flue gas treatment trains to minimize amine solvent emissions, plays an important role to capture N-nitrosamines and control their emission into the environment. The waterwash solution is the last point where these compounds can be properly neutralized before becoming an environmental hazard. In this study, the decomposition mechanisms of N-nitrosamines in a simulated CCS waterwash with residual alkanolamines was investigated using several laboratory-scale electrolyzers utilizing carbon xerogel (CX) electrodes. Hcell experiments revealed that N-nitrosamines were decomposed through a reduction reaction and are converted into their corresponding secondary amines thereby neutralizing their environmental impact. Batch-cell experiments statistically examined the kinetic models of N-nitrosamine removal by a combined adsorption and decomposition processes. The cathodic reduction of the N-nitrosamines statistically obeyed the first-order reaction model. Finally, a prototype flow-through reactor using an authentic waterwash was used to successfully target and decompose N-nitrosamines to below the detectable level without degrading the amine solvent compounds allowing them to be return to the CCS and lower the system operating costs. Furthermore, the developed electrolyzer was able to efficiently remove greater than 98% of N-nitrosamines from the waterwash solution without producing any additional environmentally harmful compounds and offers an effective and safe route to mitigate these compounds from CO 2 capture systems.

20 FOSSIL-FUELED POWER PLANTS↗

Development & Validation of Low-Cost, Highly-Durable, Spinel-Based Materials for SOFC Cathode-Side Contact (Final Report)

A cathode-side contact layer is required to provide and maintain stable electrical conduction paths between the interconnect and cathode in a solid oxide fuel cell (SOFC) stack assembly and thus minimize the ohmic resistance and stack power loss. Current cathode-interconnect contact materials are based on noble metals, electrically-conductive perovskites, their composite materials, etc. These materials are either too expensive or do not possess the overall balanced performance required for the cathode-side contact application. To achieve the DOE SOFC system cost and performance stability goals, a new generation of low-cost, high-performance contact materials needs to be developed. In this project, spinel-based materials thermally converted from the Fe-Ni and Co-Mn based alloy precursors were developed and validated for the cathode-side contact application. The precursor alloy compositions were optimized via a combination of composition screening in the (Ni,Fe) 3 O 4 and (Mn,Co) 3 O 4 spinel system, alloy design using physical metallurgy principles, and cost considerations. The alloy powders with the desired composition and particle size were manufactured via gas atomization. The optimal process parameters for thermal conversion of these alloy precursor layers to a spinel-based layer were identified, i.e., 900°C x 2h in air, which is close to the initial stack firing condition. The area-specific resistances (ASRs) of the interconnect/contact/cathode test assemblies with the developed contact layer were determined for various durations (up to 5000 h) under simulated cathodic operation conditions. Some of the alloy-derived spinel contacts exhibited the lowest ASR and ASR degradation rate. The in-stack performance of the most promising alloy-derived contact layer is currently being evaluated via stack testing. To reduce the stack cost, the Co-Mn based alloy powders were utilized as the precursor for synthesis of dense spinel-based interconnect coating. By optimizing both the initial powder size/distribution and the alloy powder composition, a dense (Mn,Co) 3 O 4 -based spinel coating was achieved. Furthermore, co-sintering of the coating/contact dual-layer structure under the initial stack firing condition was realized by utilizing the tailored Co-Mn alloy precursors. Cost analysis of the developed technology indicated a total stack cost reduction of around 10.6% with the implementation of co-sintering of the interconnect coating and the contact layer during initial stack firing. Since low-cost processes such as screen printing is utilized in the precursor application and no reduction heat treatment is needed for the coating formation, the developed technology can be readily implemented at the industrial partner’s manufacturing facilities with no additional capital investment needed.

08 HYDROGEN↗

Defect Chemistry in High‐Voltage Cathode Materials for Lithium‐Ion Batteries

High-voltage cathodes (HVCs) have emerged as a paramount role for the next-generation high-energy-density lithium-ion batteries (LIBs). However, the pursuit of HVCs comes with inherent challenges related to defective structures, which significantly impact the electrochemical performance of LIBs. The current obstacle lies in the lack of a comprehensive understanding of defects and their precise effects. This perspective aims to provide insights into defect chemistry for governing HVCs. The classifications, formation mechanisms, and evolution of defects are outlined to explore the intricate relationship between defects and electrochemical behavior. The pressing need for cutting-edge characterization techniques that comprehensively investigate defects across various temporal and spatial scales is emphasized. Building on these fundamental understandings, engineering strategies such as composition tailoring, morphology design, interface modification, and structural control to mitigate or utilize defects are thoroughly discussed for enhanced HVCs performance. Furthermore, these insights are expected to provide vital guidelines for developing high-performance HVCs for next-generation high-energy lithium-ion batteries.

cross-scale characterization↗

Scale-Up of Novel Li-Conducting Halide Solid State Battery Electrolyte

LBNL and project partner Saint Gobain (SG) demonstrated scalable processing of halide-based solid state batteries. SG’s innovative halide-based SSE utilized in this project is inherently scalable: it can be compressed into a dense electrolyte sheet at room temperature under moderate pressure, can be processed in dry air, and does not present any safety issues during processing or end use. The halide material forms the dense electrolyte layer, and is dispersed in the thick cathode to form a highly conductive path for Li ions. The halide also comes in contact with various environments and other materials (solvents, binders, processing equipment, etc.) throughout the battery manufacturing process, and must be stable in contact with cathode and anode materials during operation.

25 ENERGY STORAGE↗

Digital Miniature Cathode Ray Magnetometer

In this study, we introduce the concept and construction of an innovative Digital Miniature Cathode Ray Magnetometer designed for the precise detection of magnetic fields. This device addresses several limitations inherent to magnetic probes such as D.C. offset, nonlinearity, temperature drift, sensor aging, and the need for frequent recalibration, while capable of operating in a wide range of magnetic fields. The core principle of this device involves the utilization of a charged particle beam as the sensitivity medium. The system leverages the interaction of an electron beam with a scintillator material, which then emits visible light that is captured by an imager. The emitted scintillation light is captured by a CMOS sensor. This sensor not only records the scintillation light but also accurately determines the position of the electron beam, providing invaluable spatial information crucial for magnetic field mapping. The key innovation lies in the combination of electron beam projection, CMOS imager scintillation-based detection, and digital image signal processing. By employing this synergy, the magnetometer achieves remarkable accuracy, sensitivity and dynamic range. The precise position registration enabled by the CMOS sensor further enhances the device’s utility in capturing complex magnetic field patterns, allowing for 2D field mapping. In this work, the optimization of the probe’s performance is tailored for applications related to the characterization of insertion devices in light sources, including undulators.

Turqueti, Marcos↗