Search NASA⌕ Search

SEARCH · Search NASA

Results for “circularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

A Memory Efficient Lock-Free Circular Queue

Hardware queues are import in many applications, such as data transfer, synchronization of concurrent modules with the need of mutual exclusion constructs. State of the art bounded (of a fixed size) lock free circular queues are implemented either by read/write atomic operations, or barrier conditions, or by separating dequeue and enqueue operations. However, these queues always require an unused element at all the times to safe-guard the front and rear pointers of the queue, so as to avoid data race conditions, which leads to the waste of memory. The waste of memory is especially disadvantageous in applications such as I/O data transfer, and image transfer between processing filters, when large element size is needed, We propose a lock-free solution of the bounded circular queue through read/write atomic operations, but without the need of an extra element in the queue. The proposed solution is implemented and verified in both Verilog and ’C’ languages. We also demonstrate its effectiveness by comparing its area and delay metrics with the implementations of other existing designs of queue.

Miniskar, Narasinga Rao↗

Lighting Policy Options to Incentivize the Circular Economy

Energy codes and energy efficiency policy are primed for significant shifts in the coming decade. Consumers are increasingly asking manufacturers to take responsibility for products over the course of the product lifespan, including at end-of-life. Consumer demand for social and environmental responsibility may push new codes and policies that incentivize the circular economy. Within the lighting sector, for example, rapid innovations have created large energy savings but also created a complex waste stream. Traditional energy code approaches to lighting efficiency have considered only lighting power density or energy-based metrics. Shifting codes and policy to consider environmental impacts of the product lifecycle could include circular economy mechanisms such as product deposits or service-based business models. In this paper we consider the possible structures for both codes and policies, and provide an analysis of the merits of each policy using life cycle assessment and sustainability index (SI).

Dillon, Heather↗

Non-circular optical fiber and mode shape converter and method

A class of fibers is described that have a non-circular cross section on one or both ends that can by optimized to capture the optical radiation from a laser diode or diode array and deliver the light in the same or different shape on the opposite end of the fiber. A large multimode rectangular waveguide may be provided which can accept the radiation from a high-power diode bar and transform it into a circular cross section on the opposite end, while preserving brightness.

Drachenberg, Derrek R.↗

Advancing environmental assessment of the circular economy: Challenges and opportunities

The lifecycle assessment (LCA) framework is widely applied to comprehensively evaluate and improve the environmental performance of a circular economy (CE). The advances and application of LCA has been primarily restricted to evaluate the environmental performance of the CE at a micro-level, wherein the CE is implemented for a single product system. However, the CE can be operationalized at two broader levels: the meso–level (for eco-industrial parks) and the macro-level (for a city, state, or nation). Six methodological challenges emerge when applying LCA to a meso- or macro-level CE and remain unaddressed in the existing literature. This includes: selecting a relevant system boundary and functional unit, addressing data paucity and uncertainty, accounting for stakeholder behavior, assessing the trade-offs from renewable energy (RE) use, accounting for manufacturing and technology evolution, and quantifying displacement and rebound. This article proposes potential solutions and research priorities to address the above challenges.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Anisotropic Circular Dichroism Signatures of Oriented Thylakoid Membranes and Lamellar Aggregates of LHCII

In photosynthesis research, circular dichroism (CD) spectroscopy is an indispensable tool to probe molecular architecture at virtually all levels of structural complexity. At the molecular level, the chirality of the molecule results in intrinsic CD; pigment-pigment interactions in protein complexes and small aggregates can give rise to excitonic CD bands, while 'psi-type' CD signals originate from large, densely packed chiral aggregates. It has been well established that anisotropic CD (ACD), measured on samples with defined non-random orientation relative to the propagation of the measuring beam, carries specific information on the architecture of molecules or molecular macroassemblies. However, ACD is usually combined with linear dichroism and can be distorted by instrumental imperfections, which given the strong anisotropic nature of photosynthetic membranes and complexes, might be the reason why ACD is rarely studied in photosynthesis research. In this study, we present ACD spectra, corrected for linear dichroism, of isolated intact thylakoid membranes of granal chloroplasts, washed unstacked thylakoid membranes, photosystem II (PSII) membranes (BBY particles), grana patches, and tightly stacked lamellar macroaggregates of the main light-harvesting complex of PSII (LHCII). We show that the ACD spectra of face- and edge-aligned stacked thylakoid membranes and LHCII lamellae exhibit profound differences in their psi-type CD bands. Marked differences are also seen in the excitonic CD of BBY and washed thylakoid membranes. Magnetic CD (MCD) spectra on random and aligned samples, and the largely invariable nature of the MCD spectra, despite dramatic variations in the measured isotropic and anisotropic CD, testify that ACD can be measured without substantial distortions and thus employed to extract detailed information on the (supra)molecular organization of photosynthetic complexes. An example is provided showing the ability of CD data to indicate such an organization, leading to the discovery of a novel crystalline structure in macroaggregates of LHCII.

59 BASIC BIOLOGICAL SCIENCES↗

THE BUCKLING OF CIRCULAR CYLINDRICAL SHELLS SUBJECT TO AXIAL IMPACT

Early experimental results on the buckling of circular cylindrical shells subject to axial impact are described. A hypothesis for the mechanism of buckling which was based on these experiments is described. The results of further experiments which were designed to test predictions from the hypothesis and which appear to verify it in several aspects are then described.

IMPACT↗

Some Investigations of the General Instability of Stiffened Metal Cylinders IV : Continuation of Tests of Sheet-covered Specimens and Studies of the Buckling Phenomena of Unstiffened Circular Cylinders

This is the fourth of a series of reports covering an investigation of the general instability problem by the California Institute of Technology. The first five reports of this series cover investigations of the general instability problem under the loading conditions of pure bending and were prepared under the sponsorship of the Civil Aeronautics Administration. The succeeding reports of this series cover the work done on other loading conditions under the sponsorship of the National Advisory Committee for Aeronautics. This report is to deal primarily with the continuation of tests of sheet-covered specimens and studies of the buckling phenomena of unstiffened circular cylinders.

CYLINDERS, STEEL↗

X‐ray Magnetic Circular Dichroism Spectroscopy Applied to Nitrogenase and Related Models: Experimental Evidence for a Spin‐Coupled Molybdenum(III) Center

Abstract Nitrogenase enzymes catalyze the reduction of atmospheric dinitrogen to ammonia utilizing a Mo‐7Fe‐9S‐C active site, the so‐called FeMoco cluster. FeMoco and an analogous small‐molecule (Et 4 N)[(Tp)MoFe 3 S 4 Cl 3 ] cubane have both been proposed to contain unusual spin‐coupled Mo III sites with an S (Mo)=1/2 non‐Hund configuration at the Mo atom. Herein, we present Fe and Mo L 3 ‐edge X‐ray magnetic circular dichroism (XMCD) spectroscopy of the (Et 4 N)[(Tp)MoFe 3 S 4 Cl 3 ] cubane and Fe L 2,3 ‐edge XMCD spectroscopy of the MoFe protein (containing both FeMoco and the 8Fe‐7S P‐cluster active sites). As the P‐clusters of MoFe protein have an S =0 total spin, these are effectively XMCD‐silent at low temperature and high magnetic field, allowing for FeMoco to be selectively probed by Fe L 2,3 ‐edge XMCD within the intact MoFe protein. Further, Mo L 3 ‐edge XMCD spectroscopy of the cubane model has provided experimental support for a local S (Mo)=1/2 configuration, demonstrating the power and selectivity of XMCD.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polyolefin Innovations Toward Circularity and Sustainable Alternatives

The unprecedented growth and socioeconomic impacts of polyolefins clearly outline a major success story in the world of polymer science. Polyolefins revolutionizes industries such as health care, construction, and food packaging. Despite the benefits of polyolefins, there is a rising concern for the environment due to high production volume (i.e., fossil fuel consumption), often short usage time, and problems related to waste management and accumulation in the natural environment. Creating a circular economy for polyolefins through effective recycling technologies has the potential to decrease the environmental impact of these materials. This perspective discusses polyolefins and their impact, existing and emerging recycling/upcycling solutions, and recycle-by-design alternatives that are challenging the status quo.

circular economy↗

X-ray magnetic circular dichroism and reflection anisotropy spectroscopy Kerr effect studies of capped magnetic nanowires

Aligned Co wires grown on Pt(997) under ultra-high vacuum conditions have been capped successfully by the epitaxial growth of Au monolayers (ML) at room temperature. The samples were kept under vacuum except when transferring between apparatus or when making some of the measurements. No degradation of the Co wires was detected during the measurements. The magneto-optic response of the system was measured using X-ray magnetic circular dichroism (XMCD) at the Co L{sub 2,3} edge and reflection anisotropy spectroscopy (RAS) at near normal incidence, which is sensitive to the normal component of the out-of-plane magnetization via the Kerr effect (MOKE). Capping the wires significantly impacts their magnetic properties. Comparison of the magneto-optic response of the system at X-ray and optical energies reveals small differences that are attributed to the induced moment in the Pt substrate and Au capping layer not picked up by the element specific XMCD measurements. The sensitivity of RAS-MOKE is sufficient to allow the determination of the easy axis direction of the capped wires to within a few degrees. The results for a 6-atom-wide Co wire sample, capped with 6 ML of Au, are consistent with the capped wires possessing perpendicular magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local Noncentrosymmetric Structure of Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+y} by X-ray Magnetic Circular Dichroism at Cu K-Edge XANES

The two-dimensional Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+y} (Bi2212), the most studied prototype cuprate superconductor, is a lamellar system made of a stack of two-dimensional corrugated CuO{sub 2} bilayers separated by Bi{sub 2}O{sub 2+y}Sr{sub 2} O{sub 2} layers. While the large majority of theories, proposed to interpret unconventional high T{sub c} superconductivity in Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+y}, assume a centrosymmetric tetragonal CuO{sub 2} lattice for the [CuO{sub 2}]Ca[CuO{sub 2}] bilayer, here, we report new compelling results providing evidence for local noncentrosymmetric symmetry at the Cu atom. We have measured polarized Cu K-edge XANES (X-ray absorption near-edge structure) and the K-edge X-ray magnetic circular dichroism (XMCD) of a Bi2212 single-crystal near-optimum doping. The Cu K-edge XMCD signal was measured at ID12 beamline of ESRF with the k-vector of X-ray beam parallel to c-axis, i.e., with the electric field of X-ray beam E//ab, using a 17-T magnetic field parallel to the c-axis of a Bi2212 single crystal. Numerical simulations of the XMCD signal of Bi2212 by multiple scattering theory have shown agreement with the experimental XMCD signal only for the local structure with noncentrosymmetric Bb2b space group of Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+y}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-polarization and x-ray magnetic circular dichroism in GaAs

The combination of angular spin momentum with electronics is a promising successor to charge-based electronics. The conduction bands in GaAs may become spin-polarized via optical spin pumping, doping with magnetic ions, or induction of a moment with an external magnetic field. We investigated the spin populations in GaAs with x-ray magnetic circular dichroism for each of these three cases. We find strong anti-symmetric lineshapes at the Ga L3 edge indicating conduction band spin splitting, with differences in line width and amplitude depending on the source of spin polarization.

74 ATOMIC AND MOLECULAR PHYSICS↗

Circular Economy - A challenge and an opportunity for Process Systems Engineering

Rising populations put huge stresses on natural resources. Extraction and depletion of raw materials and waste created throughout the supply chain of products have enormous environmental and socioeconomic impacts. One way to reduce these impacts is through the move towards the circular economy (CE). CE aims to solve resource, waste, and emission challenges confronting society by creating a production-to-consumption total supply chain that is restorative, regenerative, and environmentally benign. This article highlights research challenges and identifies process systems engineering (PSE) research opportunities to assist in the understanding, analysis and optimization of CE supply chains. A motivating example on the supply chain of coffee is introduced to illustrate the challenges of the transition towards a CE and to propose PSE research opportunities.

42 ENGINEERING↗

Sustainable recovery of Rare Earth Elements (REEs) from coal and coal ash through urban mining: A Nature Based Solution (NBS) for circular economy

The demand for rare earth elements (REEs) has surged in recent years, driven by their crucial role in various industrial applications and their uneven geological distribution. As a result, urban mining from secondary resources, particularly coal and coal ash, has gained traction as a sustainable solution within a circular economy framework. This study highlights the significant presence of REEs in coal and coal ash, revealing that certain samples contain REE concentrations that rival traditional ores. Notably, coal ash has the potential to yield approximately 312,000 tons of REEs annually, far exceeding global demand. The research delves into advanced techniques for analyzing REEs, including elemental, isotopic, and mineralogical studies. Additionally, it explores innovative extraction methods such as the use of green solvents, nature-based solutions, and bioleaching and biosorption. By leveraging coal and its byproducts as secondary resources, this study underscores the opportunity to reduce dependence on conventional mining, enhancing the sustainability of REE recovery. Here, a comprehensive literature review was conducted to highlight technological advancements and emerging opportunities that can address current challenges in this field.

Circular economy↗

Mono-material product design with bio-based, circular, and biodegradable polymers

The traditional multi-material product design of plastic products significantly complicates both existing and emerging recycling processes. Here, we discuss the concept of mono-material product design, which is based on circular and biodegradable polymers made of a single monomer, delivering tailorable properties via molecular or macromolecular engineering without changing its chemical makeup or composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An investigation of hard-disk drive circularity accounting for socio-technical dynamics and data uncertainty

The installed data storage capacity in the U.S. will reach 2.2 Zettabytes by 2025, generating about 50 million units of end-of-life (EOL) hard-disk drives (HDDs) per year. Due to data security concerns, most EOL HDDs are currently shredded (even when still functioning), representing an economic loss. Moreover, raw material extraction linked to the increased demand for storage causes environmental impacts. Besides mitigating the threat posed by sudden restrictions of raw materials, the circular economy (CE) offers to maximize value retention in the economy and reduce the environmental impacts of human activities. Common CE strategies are reusing and recycling products. However, the reuse of hard disk drives is currently burdened by the lack of trust HDD end-users have toward other non-physical means of data removal than shredding. Here, an agent-based modeling (ABM) approach is proposed to explore how techno-economic and social factors affect end-users' decisions to adopt EOL management practices other than shredding. The proposed method also accounts for data uncertainty by applying a semi-quantitative approach. Results demonstrate how increased green procurement and more robust standards could spur end-users' trust toward data-wiping technologies. Even when accounting for uncertainty, HDDs' reuse brings better environmental and economic benefits than HDD shredding followed by material recovery. The semi-quantitative approach proposed in this study could be more universally applied in future ABM, especially given the often-stochastic nature of such models. The developed ABM is also the first to represent several HDD industry stakeholders and demonstrate how the HDD shredding lock-in situation could be resolved.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A systems engineering framework for the optimization of food supply chains under circular economy considerations

The current linear “take-make-waste-extractive” model leads to the depletion of natural resources and environmental degradation. Circular Economy (CE) aims to address these impacts by building supply chains that are restorative, regenerative, and environmentally benign. This can be achieved through the re-utilization of products and materials, the extensive usage of renewable energy sources, and ultimately by closing any open material loops. Such a transition towards environmental, economic and social advancements requires analytical tools for quantitative evaluation of the alternative pathways. Here, in this work, we present a novel CE system engineering framework and decision-making tool for the modeling and optimization of food supply chains. First, the alternative pathways for the production of the desired product and the valorization of wastes and by-products are identified. Then, a Resource-Task-Network representation that captures all these pathways is utilized, based on which a mixed-integer linear programming model is developed. This approach allows the holistic modeling and optimization of the entire food supply chain, taking into account any of its special characteristics, potential constraints as well as different objectives. Considering that typically CE introduces multiple, often conflicting objectives, we deploy here a multi-objective optimization strategy for trade-off analysis. A representative case study for the supply chain of coffee is discussed, illustrating the steps and the applicability of the framework. Single and multi-objective optimization formulations under five different coffee-product demand scenarios are presented. The production of instant coffee as the only final product is shown to be the least energy and environmental efficient scenario. On the contrary, the production solely of whole beans sets a hypothetical upper bound on the optimal energy and environmental utilization. In both problems presented, the amount of energy generated is significant due to the utilization of waste generated for the production of excess energy.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗