Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Quantitative determination of site occupancy of multi-rare-earth elements doped into Ca{sub 2}SnO{sub 4} phosphor by electron channeling microanalysis

X-ray fluorescence analysis based on electron channeling effects in transmission electron microscopy (TEM) was performed on Ca{sub 2}SnO{sub 4} phosphor materials doped with Eu{sup 3+}/Y{sup 3+} at various concentrations, which showed red photoluminescence associated with the {sup 5}D{sub 0}-{sup 7}F{sub 2} electric dipole transition of Eu{sup 3+} ions. The method provided direct information on which host element site dopant elements occupy, the results of which were compared with those of X-ray diffraction (XRD)-Rietveld analysis. The obtained results indicated that while it is not favorable for a part of Eu{sup 3+} to occupy the smaller Sn{sup 4+} site, this is still energetically better than creating Ca vacancies or any other of the possible charge balance mechanisms. The local lattice distortions associated with dopant impurities with different ionic radii were also examined by TEM-electron energy-loss spectroscopy (TEM-EELS). The change in PL intensity as a function of dopant concentration is discussed based on the experimental results, although the general concept of concentration quenching applies. - Abstract: The composition of Ca{sub 1.8}Eu{sub 0.2}Y{sub 0.2}Sn{sub 0.8}O{sub 4} determined by electron channeling microanalysis is graphically shown, where the rare-earth dopants, Eu and Y preferentially occupy the Ca and Sn sites, respectively, to maintain the local charge neutrality.

36 MATERIALS SCIENCE↗

Effect of high-energy electron beam irradiation on the properties of ZnO thin films prepared by magnetron sputtering

In this work we demonstrate that high-energy electron beam irradiation (HEEBI) performed in air at room temperature affects remarkably the electrical, optical, and structural properties of undoped ZnO films prepared on SiO{sub 2} substrates by magnetron sputtering techniques. Hall and photoluminescence measurements revealed that the p-type conductivity was realized in HEEBI treated films with low dose of 10{sup 14} electrons/cm{sup 2} and converted to n-type conductivity with further increase in the amount of dose. X-ray photoelectron spectroscopy showed that indiffusion of Si from the substrate as well as N from the ambient into the films took place as a result of HEEBI treatment at high and low doses, respectively. X-ray diffraction analysis indicated that all as-grown films were found to have compressive stress, which was relieved to some extent by HEEBI treatment with high dose of 10{sup 16} electrons/cm{sup 2}. It was also found that better crystallinity with a bigger grain size was observed in HEEBI treated ZnO films with a higher dose. Field emission scanning electron microscope showed that HEEBI treated films with low dose had surface morphologies with big rodlike shapes. The major acceptorlike defects were determined to be oxygen interstitial and zinc vacancy. A model was proposed in terms of O, Zn, N, and Si diffusion to explain the observed results.

36 MATERIALS SCIENCE↗

Colossal dielectric constant and relaxation behaviors in Pr:SrTiO{sub 3} ceramics

Sr{sub 1-x}Pr{sub x}TiO{sub 3} ceramics (0.00{<=}x{<=}0.03) were prepared by a traditional solid-state reaction method. Two relaxation processes (marked as A and B) of the Sr{sub 0.09}Pr{sub 0.01}TiO{sub 3} ceramics were investigated by analyzing the E{sub a} values obtained from the Arrhenius law. Colossal dielectric constant (CDC) was first obtained in Sr{sub 0.09}Pr{sub 0.01}TiO{sub 3} ceramics, whose permittivity was up to 3000 (1 kHz, room temperature), greater than that of pure SrTiO{sub 3} ceramics and samples with more Pr addition (x=0.02 and 0.03). This CDC behavior was related to the internal barrier layer capacitance mechanism.

36 MATERIALS SCIENCE↗

Preparation of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} for Lithium Batteries Via Solid-State Redox Method using Nitrate and Acetate Based Reactants

LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} is a potential cathode material for 5 V batteries. This material was prepared by the solid-state redox method using nitrate and acetate based reactants. The precursor material was obtained when the mixture reactants was heated at 500 deg. C for 10 hours and calcined at different temperatures in the range between 650 and 950 deg. C for 12 hours. The structures of the synthesized materials were verified with X- ray diffraction (XRD) measurement and Scanning Electron Microscope (SEM). The charge-discharge technique was determined using Solartron 1470. As calcination temperature increases, the well-ordered crystal growth oriented to [1 1 1] direction shows a clear octahedral morphology, which is the characteristic of the typical cubic spinel. The Li/LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} prepared from acetate based reactants calcined at 750 deg. C for 12 h delivered the discharge capacity of 140 mAh/g.

36 MATERIALS SCIENCE↗

Cup-Drawing Behavior of High-Strength Steel Sheets Containing Different Volume Fractions of Martensite

Planar anisotropy and cup-drawing behavior were investigated for high-strength steel sheets containing different volume fractions of martensite. Macrotexture analysis using XRD was conducted to capture the effect of crystallographic orientation on the planar anisotropy of high-strength steel sheets. A phenomenological yield function, Yld96, which accounts for the anisotropy of yield stress and r-values, was implemented into ABAQUS using the user subroutine UMAT. Cup drawing of high-strength steel sheets was simulated using the FEM code. The profiles of earing and thickness strain were compared with the experimentally measured results.

36 MATERIALS SCIENCE↗

Microstructure Study For Optimization Of Dielectric Property Of Electrical Porcelain

Five sample mixtures of kaolin, ball clay, feldspar and Quartz were formulated and porcelain samples fabricated. Crystalline phases and mullite morphology were studied using XRD and SEM respectively. A composition of 30% kaolin, 15% ball clay, 30% feldspar and 25% quartz yielded a body with high dielectric strength of 19 kV/mm compare to an ISO graded product having dielectric strength 14.6 KV/mm after firing at 1225 deg. C.

36 MATERIALS SCIENCE↗

Chemical stability of highly (0001) textured Sm(CoCu){sub 5} thin films with a thin Ta capping layer

With the highest magnetocrystalline anisotropy constant (Ku) among practical magnetic materials, SmCo{sub 5} could be a very attractive candidate for future high areal density magnetic recording. However, its corrosion resistance is always a concern in recording media applications. In this paper, the chemical stability and microstructures of highly (0001) textured Sm(CoCu){sub 5} thin films with and without a 3 nm Ta capping layer were reported. For Sm(CoCu){sub 5} thin films without a capping layer, the coercivity decreases significantly (from 8kOe to 1kOe) within one month. Sm(CoCu){sub 5} thin films capped with a thin Ta layer (3 nm) behave differently. Even exposed to a laboratory environment (25 deg. C) over 3 years, the Ta-capped Sm(CoCu){sub 5} thin films are stable in terms of structural and magnetic properties, i.e., there were no changes in X-ray diffraction peaks and vibrating sample magnetometer hysteresis loops. Microstructure of Ta-capped Sm(CoCu){sub 5} thin films showed that Sm(CoCu){sub 5} formed a domelike particle assembly structure on a smooth Ru underlayer and were well covered by partially oxidized Ta capping layer, as shown by TEM cross-section micrographs. Accelerated corrosion treatment (130 deg. C, 95% relative humidity, 6 h) was performed on Ta-capped Sm(CoCu){sub 5} thin films. X-ray photoelectron spectroscopy (XPS) results showed that no Co was detected on the sample surface before the corrosion treatment, but strong XPS signals of CoOx and Co(OH)x were observed after treatment. Therefore, none of our Sm(CoCu){sub 5} thin films can pass the accelerated corrosion test. Hcp-phased CoPt-alloys are proposed as better capping materials for Sm(CoCu){sub 5} thin films in future high-density magnetic recording applications.

36 MATERIALS SCIENCE↗

Perpendicular magnetic anisotropy and spin reorientation transition in L1{sub 0} FePt films

We investigated the thickness and composition dependence of perpendicular magnetic anisotropy (PMA) in L1{sub 0} Fe{sub 1-x}Pt{sub x} (x = 0.4, 0.5, and 0.55) films. The FePt films with different thicknesses of 35 and 70 A were grown at the substrate temperature T{sub s} = 300 deg. C by molecular beam epitaxy coevaporation technique. A (001)-oriented epitaxial L1{sub 0} FePt film was grown on the thin (001)-oriented fcc Pt layer, while a poorly crystallized FePt film was formed on the (111)-textured Pt layer. Our results showed that, at a fixed thickness of 70 A, the PMA of FePt alloy films is enhanced as Pt content increases from 40% to 55%.

36 MATERIALS SCIENCE↗

Modulation periodicity dependent structure, stress, and hardness in NbN/W{sub 2}N nanostructured multilayer films

NbN/W{sub 2}N nano-multilayer films with a modulation periodicity, {Lambda}, ranging from 5.1 to 157.4 nm have been deposited on a Si(100) substrate by reactive magnetron sputtering in Ar/N{sub 2} mixtures. The {Lambda} dependent structural and mechanical properties for the resulting NbN/W{sub 2}N multilayers have been evaluated by means of low-angle x-ray reflectivity, x-ray diffraction, high-resolution transmission electron microscope, and nanoindentation measurements. The finding is that for films with {Lambda}{<=} 10.6 nm, fcc NbN layers are coherent with cubic W{sub 2}N layers, resulting in NbN layers and W{sub 2}N layers that are in the compressive and tensile states, respectively. In contrast, as {Lambda} is larger than 10.6 nm, a phase transition from W{sub 2}N to W occurs in the W{sub 2}N layer, which is a result of the coherent interface strain relaxation. For this case, all layers are in the compressive state, and the coherent interface disappears. The intrinsic compressive stress evolution with {Lambda} can be interpreted in terms of interface stress. The formation of coherent interface at small {Lambda} ({<=}10.6 nm) is helpful for releasing point defects in layers, leading to a low compressive stress ({<=}1.1 GPa). The hardness for the obtained multilayer film increases with decreasing {Lambda}, and approaches a maximum value of 43.7 GPa when {Lambda} is 7.4 nm. The maximum strengthen at lower {Lambda} is mainly attributed to coherent interface stresses and the modulus difference between the NbN and W{sub 2}N layers. The increase in hardness with a decrease in {Lambda} is interpreted by the Lehoczky model.

36 MATERIALS SCIENCE↗

Magnetic and Magnetotransport Properties of (Pr{sub 0.7}Sr{sub 0.3}MnO{sub 3}){sub 1-x}/NiO{sub x} Composites

In this paper, we report the structural, magnetic and magnetotransport properties of (Pr{sub 0.7}Sr{sub 0.3}MnO{sub 3}){sub 1-x}/NiO{sub x}(x = 0, 0.05, 0.10, 0.15 and 0.20) composites samples. The composite samples have been synthesized in such a manner so that there is no reaction between Pr{sub 0.7}Sr{sub 0.3}MnO{sub 3}(PSMO) and NiO. This has been confirmed by XRD and FESEM results. The magnetic measurements show reduction in ferromagnetic ordering in the composite samples with increasing level of NiO. Furthermore, incorporation of NiO phase into Pr{sub 0.7}Sr{sub 0.3}MnO{sub 3} matrix lowers the metal-insulator transition temperature (TIM) and increases the resistance of composites. An enhancement in magnetoresistance (MR) is observed at low temperature, below 140 K, for the composites with x = 0.05, 0.10 and 0.15 and at high temperature (298K) for all the composites at applied magnetic field H = 5 kOe. It is suggested that the higher value of MR at temperature below 140 K is low field magnetoresistance (LFMR) caused by spin polarized tunneling, whereas at around room temperature it is caused by magnetic disordering.

36 MATERIALS SCIENCE↗

Structural and Dielectric Properties of LiSr{sub 2}Nb{sub 5}O{sub 15} Ceramic

The polycrystalline sample of LiSr{sub 2}Nb{sub 5}O{sub 15}(LSN) was prepared by a high temperature solid-state reaction technique. Studies of structural and microstructural characterizations were performed by X-ray diffraction (XRD) and scanning electron microscope (SEM) techniques. X-ray studies reveal that the material has an orthorhombic structure at room temperature. Dielectric properties were measured over a wide range of temperature (28-500 deg. C) and frequency (10{sup 2}-10{sup 6} Hz). Conductivity of the material increases with rise in temperature.

36 MATERIALS SCIENCE↗

Self-modulated nanostructures in super-large-period Bi{sub 11}(Fe{sub 5}CoTi{sub 3}){sub 10/9}O{sub 33} epitaxial thin films

Super-large-period Aurivillius thin films with a pseudo-period of ten were grown on (0 0 1) SrTiO{sub 3} substrates using the pulsed laser deposition method. The as-grown films are found to be coherently strained to the substrate and atomically smooth. X-ray diffraction indicates an average periodicity of ten, while analysis with the high resolution scanning transmission electron microscopy reveals a self-modulated nanostructure in which the periodicity changes as the film thickness increases. Finally, we discuss the magnetic and possible ferroelectric properties of the self-modulated large period Aurivillius films at the room temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Epitaxial growth of fcc-Co{sub x}Ni{sub 100-x} thin films on MgO(110) single-crystal substrates

Co{sub x}Ni{sub 100-x} (x=100, 80, 20, 0 at. %) epitaxial thin films were prepared on MgO(110) single-crystal substrates heated at 300 deg. C by ultrahigh vacuum molecular beam epitaxy. The growth mechanism is discussed based on lattice strain and crystallographic defects. CoNi(110) single-crystal films with a fcc structure are obtained for all compositions. Co{sub x}Ni{sub 100-x} film growth follows the Volmer-Weber mode. X-ray diffraction analysis indicates that the out-of-plane and the in-plane lattice spacings of the Co{sub x}Ni{sub 100-x} films are in agreement within +-0.5% with the values of the respective bulk Co{sub x}Ni{sub 100-x} crystals, suggesting that the strain in the film is very small. High-resolution cross-sectional transmission microscopy shows that an atomically sharp boundary is formed between a Co(110){sub fcc} film and a MgO(110) substrate, where periodical misfit dislocations are preferentially introduced in the film at the Co/MgO interface. The presence of such periodical misfit dislocations relieves the strain caused by the lattice mismatch between the film and the substrate.

36 MATERIALS SCIENCE↗

Structure and giant magnetoresistance of granular Co-Cu nanolayers prepared by cross-beam pulsed laser deposition

A series of Co{sub x}Cu{sub 100-x} (x=0, 40-75, 100) layers with thicknesses between 13 and 55 nm were prepared on silicon substrates using cross-beam pulsed laser deposition. Wide-angle x-ray diffraction (WAXRD), transmission electron microscopy (TEM), and electrical transport measurements revealed a structure consisting of decomposed cobalt and copper grains with grain sizes of about 10 nm. The influence of cobalt content and layer thickness on the grain size is discussed. Electron diffraction indicates the presence of an intermetallic Co-Cu phase of Cu{sub 3}Au structure type. Thermal treatment at temperatures between 525 and 750 K results in the progressive decomposition of Co and Cu, with an increase of the grain sizes up to about 100 nm. This is tunable by controlling the temperature and duration of the anneal, and is directly observable in WAXRD patterns and TEM images. A careful analysis of grain size and the coherence length of the radiation used allows for an accurate interpretation of the x-ray diffraction patterns, by taking into account coherent and noncoherent scattering. The alloy films show a giant magnetoresistance of 1%-2.3% with the maximum obtained after annealing at around 725 K.

36 MATERIALS SCIENCE↗

Phase-controlled solvothermal synthesis and characterization of nickel sulfides with good single crystalline nature

Dispersed rhombohedral NiS rods with high aspect ratios and rhombic dodecahedron-like cubic NiS{sub 2} crystals were prepared by solvothermal routes using NiCl{sub 2}.6H{sub 2}O and Na{sub 2}S{sub 2}O{sub 3}.5H{sub 2}O as reagents and ethylenediamine as a solvent, and 3D blossoming flower-like rhombohedral NiS microstructures were synthesized using different sulfur sources of thiourea. The products were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, energy dispersion spectrometry and selected area electronic diffraction. All the products were pure and had good single crystalline nature. The synthesis parameters were of great importance on the purity and morphology of the products. The possible growth mechanisms have been discussed based on the analyses of the effects of sulfur sources and solvent on the crystal structures and detailed configurations of the products. The present work is likely to help the phase-controlled synthesis of other metal chalcogenides. - Graphical abstract: Rhombohedral NiS dispersed rods and 3D flower-like microstructures are evolved from dispersed nucleus and aggregate of nucleus, respectively, and the cross-sections of such rods are in equilateral triangle-like shape. Highlights: > 3D blossoming flower-like r-NiS microstructures are obtained. > Equilateral triangle-like cross-sections of r-NiS rods are observed. > Approach based on XRD analysis to phase-controlled synthesis is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kirkendall-effect-based growth of dendrite-shaped CuO hollow micro/nanostructures for lithium-ion battery anodes

Three-dimensional (3D) dendrite-shaped CuO hollow micro/nanostructures have been prepared via a Kirkendall-effect-based approach for the first time and have been demonstrated as a high-performance anode material for lithium-ion batteries. The as-prepared hollow structures were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and electrochemical properties. A CuO hollow structure composed of nanocubes outside and a dense film inside was selected as a typical example of the optimized design; it exhibited significantly improved cyclability at a current rate of 0.5 C, with the average Coulombic efficiency of {approx}97.0% and 57.9% retention of the discharge capacity of the second cycle after 50 cycles. The correlation between the structure features of the hollow CuO and their electrochemical behavior was discussed in detail. Smaller size of primary structure and larger internal space of electrode materials are crucial to better electrochemical performance. This work represents that Kirkendall effect is a promising method to fabricate excellent hollow electrode materials for Li-ion batteries. - Graphical abstract: SEM images of 3D dendrite-shaped CuO hollow micro/nanostructures prepared via a Kirkendall-effect-based approach have been shown. The as-prepared CuO electrode exhibited significantly improved cyclability for Li-ion batteries.

36 MATERIALS SCIENCE↗

Optical characteristics of pulsed laser deposited Ge-Sb-Te thin films studied by spectroscopic ellipsometry

Pulsed laser deposition technique was used for the fabrication of (GeTe){sub 1-x}(Sb{sub 2}Te{sub 3}){sub x} (x = 0, 0.33, 0.50, 0.66, and 1) amorphous thin films. Scanning electron microscopy with energy-dispersive x-ray analysis, x-ray diffraction, optical reflectivity, and sheet resistance temperature dependences as well as variable angle spectroscopic ellipsometry measurements were used to characterize as-deposited (amorphous) and annealed (rocksaltlike) layers. In order to extract optical functions of the films, the Cody-Lorentz model was applied for the analysis of ellipsometric data. Fitted sets of Cody-Lorentz model parameters are discussed in relation with chemical composition and the structure of the layers. The GeTe component content was found to be responsible for the huge optical functions and thickness changes upon amorphous-to-fcc phase transition.

36 MATERIALS SCIENCE↗

1D to 2D Transition in Tellurium Observed by 4D Electron Microscopy

A new microwave-enhanced synthesis method for the production of tellurium nanostructures is reported here—with control over products from the 1D regime (sub-5 nm diameter nanowires), to nanoribbons, to the 2D tellurene regime—along with a new methodology for local statistical quantification of the crystallographic parameters of these materials at the nanometer scale. Using a direct electron detector and image-corrected microscope, large and robust 4D scanning transmission electron microscopy datasets for accurate structural analysis are obtained. These datasets allow the adaptation of quantitative techniques originally developed for X-ray diffraction (XRD) refinement analyses to transmission electron microscopy, enabling the first demonstration of sub-picometer accuracy lattice parameter extraction while also obtaining both the size of the coherent crystallite domains and the nanostrain, which is observed to decrease as nanowires transition to tellurene. This new local analysis is commensurate with global powder XRD results, indicating the robustness of both the new synthesis approach and new structural analysis methodology for future scalable production of 2D tellurene and characterization of nanomaterials.

2D materials↗