Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer software and hardware”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Computational Performance of Progressive Damage Analysis of Composite Laminates using Abaqus/Explicit with 16 to 512 CPU Cores

The computational scaling performance of progressive damage analysis using Abaqus/ Explicit is evaluated and quantified using from 16 to 512 CPU cores. Several analyses were conducted on varying numbers of cores to determine the scalability of the code on five NASA high performance computing systems. Two finite element models representative of typical models used for progressive damage analysis of composite laminates were used. The results indicate a 10 to 15 times speed up scaling from 24 to 512 cores. The run times were modestly reduced with newer generations of CPU hardware. If the number of degrees of freedom is held constant with respect to the number of cores, the model size can be increased by a factor of 20, scaling from 16 to 512 cores, with the same run time. An empirical expression was derived relating run time, the number of cores, and the number of degrees of freedom. Analysis cost was examined in terms of software tokens and hardware utilization. Using additional cores reduces token usage since the computational performance increases more rapidly than the token requirement with increasing number of cores. The in- crease in hardware cost with increasing cores was found to be modest. Overall the results show relatively good scalability of the Abaqus/Explicit code on up to 512 cores.

Bergan, A. C.↗

A strategy for reducing turnaround time in design optimization using a distributed computer system

There is a need to explore methods for reducing lengthly computer turnaround or clock time associated with engineering design problems. Different strategies can be employed to reduce this turnaround time. One strategy is to run validated analysis software on a network of existing smaller computers so that portions of the computation can be done in parallel. This paper focuses on the implementation of this method using two types of problems. The first type is a traditional structural design optimization problem, which is characterized by a simple data flow and a complicated analysis. The second type of problem uses an existing computer program designed to study multilevel optimization techniques. This problem is characterized by complicated data flow and a simple analysis. The paper shows that distributed computing can be a viable means for reducing computational turnaround time for engineering design problems that lend themselves to decomposition. Parallel computing can be accomplished with a minimal cost in terms of hardware and software.

Young, Katherine C.↗

Portable Data-Parallel Surface Reconstruction on a Uniform Rectilinear Grid

With the increasing heterogeneity and on-node parallelism of high-performance computing hardware, a major challenge is to develop portable and efficient algorithms and software. In this work, we present our implementation of a portable code to perform surface reconstruction using NVIDIA's Thrust library. Surface reconstruction is a technique commonly used in volume tracking methods for simulations of multimaterial flow with interfaces. Here, we have designed a 3D mesh data structure that is easily mapped to the 1D vectors used by Thrust and at the same time is simple to use and uses familiar data structure terminology (such as cells, faces, vertices, and edges). With this new data structure in place, we have implemented a piecewise linear interface reconstruction algorithm in 3 dimensions that effectively exploits the symmetry present in a uniform rectilinear computational cell. Finally, we report performance results, which show that a single implementation of these algorithms can be compiled to multiple backends (specifically, multi-core CPUs, NVIDIA GPUs, and Intel Xeon Phi processors), making efficient use of the available parallelism on each. We also compare performance of our implementation to a legacy FORTRAN implementation in Message Passing Interface (MPI) and show performance parity on single and multi-core CPU and achieved good parallel speed-ups on GPU. In conclusion, our research demonstrates the advantage of performance portability of the underlying data-parallel programming model.

97 MATHEMATICS AND COMPUTING↗

The CLAS12 Data Acquisition System

The CLAS12 Data Acquisition System was designed and built as part of the CLAS12 detector project in Hall B at Jefferson Laboratory. This article contains a full description of the system, including requirements, design, hardware, and software descriptions, as well as the achieved performance. The associated computing, network, and slow controls systems are also described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Foundational Report Series: Advanced Distribution Management Systems for Grid Modernization, Implementation Strategy for a Distribution Management System

Electric distribution utilities encounter many challenges to successful deployment of Distribution Management Systems (DMSs). The key challenges are documented in this report, along with suggestions for overcoming them. This report offers a recommended list of activities for implementing a DMS. It takes a strategic approach to implementing DMS from a project management perspective. The project management strategy covers DMS planning, procurement, design, building, testing, Installation, commissioning, and system integration issues and solutions. It identifies the risks that are associated with implementation and suggests strategies for utilities to use to mitigate them or avoid them altogether. Attention is given to common barriers to successful DMS implementation. This report begins with an overview of the implementation strategy for a DMS and proceeds to put forward a basic approach for procuring hardware and software for a DMS; designing the interfaces with external corporate computing systems such as EMS, GIS, OMS, and AMI; and implementing a complete solution.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Systems Security Architecture Research and Development

The general technical goals of the project were to better understand the assumptions of security guarantees using secure commercial off-the-shelf (COTS) technologies, to identify possible security weaknesses introduced during system integration, and to create improved security hardware and software which result in well understood reference architectures for critical computing systems and applications.

97 MATHEMATICS AND COMPUTING↗

National Smart Manufacturing Strategic Plan: To Facilitate More Rapid Development, Deployment and Adoption of Smart Manufacturing Technologies

Smart manufacturing technologies provide real-time data and insight to improve the productivity, efficiency, and competitiveness of U.S. manufacturing, creating the potential for new jobs in the manufacturing sector. These technologies can support U.S. manufacturers’ ability to increase throughput and energy efficiency, and decrease waste, defects, and costs. A wide range of manufacturing and industrial subsectors, particularly energy-intensive and energy-dependent industries, have the potential to benefit from smart manufacturing technologies. There are technical improvements still needed to reduce the costs and barriers (trained workforce and upskilling, software-hardware integration, cost, and technical barriers to deployment of advanced sensors, computing, and communication technologies for existing manufacturing assets) to the adoption of smart manufacturing technologies, especially to small and medium-sized manufacturers, and subsequently, increase the overall adoption rate of smart manufacturing technologies. This report outlines the Department of Energy’s (DOE) strategic plan to accelerate the development and implementation of smart manufacturing technologies in the United States and the actions DOE has taken to use these technologies in smart manufacturing for the United States. DOE’s plan to facilitate more rapid development, deployment and widespread adoption of smart manufacturing technologies derive from the 2018 Strategy for American Leadership in Advanced Manufacturing. The strategy outlines a vision for America’s leadership in advanced manufacturing including the development of intelligent manufacturing systems to optimize manufacturing facilities and support the manufacturing of transformative materials. DOE’s Clean Energy Smart Manufacturing Innovation Institute (CESMII), a Manufacturing USA Institute, focuses on accelerating the development and adoption of advanced sensors, controls, platforms, and models needed for smart manufacturing. The objective is to enhance U.S. manufacturing productivity and global competitiveness through the research and development of these technologies. Smart manufacturing has the potential to improve the overall performance, energy productivity, and efficiency of manufacturing, fostering the economic competitiveness of the manufacturing sector.

99 GENERAL AND MISCELLANEOUS↗

Tug rendezvous and docking with a spacecraft - A remote manned approach

The development and use of a visual simulator for remote-manned rendezvous and docking utilizing frame-by-frame, slow-scan, low-light-level TV (LLLTV) was conceived and initiated in mid-1974. The effort was limited to modification, checkout, and validation of simulator hardware specific to this task, to the development of simulation (digital computer) software, and technical support to several rendezvous and docking simulation studies. Analysis and simulation has shown that LLLTV, such as would be required for satellite inspection, could provide a suitable acquisition sensor for a remote manned rendezvous/docking subsystem. A manned, remote simulation has demonstrated its feasibility during the terminal rendezvous and docking phases. Should this approach prove fully adequate in subsequent detailed simulation studies and tests, an order-of-magnitude cost savings can be obtained for early rendezvous and docking operations.

Hurley, M. J.↗

RAMP: A fault tolerant distributed microcomputer structure for aircraft navigation and control

RAMP consists of distributed sets of parallel computers partioned on the basis of software and packaging constraints. To minimize hardware and software complexity, the processors operate asynchronously. It was shown that through the design of asymptotically stable control laws, data errors due to the asynchronism were minimized. It was further shown that by designing control laws with this property and making minor hardware modifications to the RAMP modules, the system became inherently tolerant to intermittent faults. A laboratory version of RAMP was constructed and is described in the paper along with the experimental results.

Dunn, W. R.↗

Real-time computer simulation/emulation for verification of multi-fault-tolerant control of Centaur-in-Shuttle

NASA has contracted with General Dynamics to design and develop an advanced Centaur liquid upper stage for support of the Galileo and Solar Polar interplanetary missions in 1985-86. The control of the Centaur while it resides in the Shuttle cargo bay must meet the STS safety requirements to be dual failure tolerant in all mission critical functions. The demonstration of the integrity of this control system in the event of multiple component failures and worst-case time-phase asynchroniety among the system's computers is performed by a real-time computer simulation. The simulation emulates the control hardware, subsystem interfaces, and imbedded software processes, wire-by-wire, to provide accessibility for fault insertion. Observability is provided via graphics and diagnostic software. Verification is the product of Monte Carlo simulation analysis.

Szatkowski, G. P.↗

Open control/display system for a telerobotics work station

A working Advanced Space Cockpit was developed that integrated advanced control and display devices into a state-of-the-art multimicroprocessor hardware configuration, using window graphics and running under an object-oriented, multitasking real-time operating system environment. This Open Control/Display System supports the idea that the operator should be able to interactively monitor, select, control, and display information about many payloads aboard the Space Station using sets of I/O devices with a single, software-reconfigurable workstation. This is done while maintaining system consistency, yet the system is completely open to accept new additions and advances in hardware and software. The Advanced Space Cockpit, linked to Grumman's Hybrid Computing Facility and Large Amplitude Space Simulator (LASS), was used to test the Open Control/Display System via full-scale simulation of the following tasks: telerobotic truss assembly, RCS and thermal bus servicing, CMG changeout, RMS constrained motion and space constructible radiator assembly, HPA coordinated control, and OMV docking and tumbling satellite retrieval. The proposed man-machine interface standard discussed has evolved through many iterations of the tasks, and is based on feedback from NASA and Air Force personnel who performed those tasks in the LASS.

Keslowitz, Saul↗

Personnel Data Analysis and Retrieval of Phase 1 Move To LC-39 Area

As a technology major from Jackson State University (JSU) I was called in as a summer intern at Kennedy Space Center (KSC) to work in the NASA Engineering, Control and Data Systems (NE-C) Division supporting the Spaceport Command and Control System (SCCS) at the Space Station Processing Facility (SSPF). I was given a two-part project; the first consisted of lending support relocating SCCS Computer Equipment and Project Personnel to the Launch Control Center (LCC). This task involved me using a Microsoft Office data processing tool to assist with the analysis and information management of logistics worth millions of dollars. With the assistance of two other interns, I was responsible for collecting data on equipment used, on a daily basis, by over 200 KSC employees. The many network servers, enterprise switches, desktop computers, and fiber optics had to be handled in an equally prompt and precise manner in order to ensure a minimal amount of equipment down time; which is critical in ensuring a properly secured networking environment. The second part of my project was to assist KSC in developing a more cost effective way of maintaining and taking full advantage of the functionality of some new kiosk units. Since KSC currently has no expert on the servicing and maintenance of the units, I, as a computer technology major, was given the opportunity to assess the hardware and software of the machines. The goal was to learn to establish a secure and remote environment for the kiosks; a goal highly valuing convenience by preserving valuable man-hours saved by not having to travel to each individual kiosk location. In addition, I was to leave a clear and precise plan for future users and administrators of the devices to follow.

Davis, Derrick D.↗

Exascale Co-design for Modeling Materials in Extreme Environments

Computational materials science has provided great insight into the response of materials under extreme conditions that are difficult to probe experimentally. For example, shock-induced plasticity and phase transformation processes in single-crystal and nanocrystalline metals have been widely studied via large-scale molecular dynamics simulations, and many of these predictions are beginning to be tested at advanced 4th generation light sources such as the Advanced Photon Source (APS) and Linac Coherent Light Source (LCLS). I will describe our simulation predictions and their recent verification at LCLS, outstanding challenges in modeling the response of materials to extreme mechanical and radiation environments, and our efforts to tackle these as part of the multi-institutional, multi-disciplinary Exascale Co-design Center for Materials in Extreme Environments (ExMatEx). ExMatEx has initiated an early and deep collaboration between domain (computational materials) scientists, applied mathematicians, computer scientists, and hardware architects, in order to establish the relationships between algorithms, software stacks, and architectures needed to enable exascale-ready materials science application codes within the next decade. We anticipate that we will be able to exploit hierarchical, heterogeneous architectures to achieve more realistic large-scale simulations with adaptive physics refinement, and are using tractable application scale-bridging proxy application testbeds to assess new approaches and requirements. Such current scale-bridging strategies accumulate (or recompute) a distributed response database from fine-scale calculations, in a top-down rather than bottom-up multiscale approach.

36 MATERIALS SCIENCE↗

Portals 4 network API definition and performance measurement

Portals is a low-level network programming interface for distributed memory massively parallel computing systems designed by Sandia, UNM, and Intel. Portals has been designed to provide high message rates and to provide the flexibility to support a variety of higher-level communication paradigms. This project developed and analyzed an implementation of Portals using shared memory in order to measure and understand the impact of using general-purpose compute cores to handle network protocol processing functions. The goal of this study was to evaluate an approach to high-performance networking software design and hardware support that would enable important DOE modeling and simulation applications to perform well and to provide valuable input to Intel so they can make informed decisions about future network software and hardware products that impact DOE applications.

99 GENERAL AND MISCELLANEOUS↗

Risk reduction using DDP (Defect Detection and Prevention): Software support and software applications

Risk assessment and mitigation is the focus of the Defect Detection and Prevention (DDP) process, which has been applied to spacecraft technology assessments and planning, both hardware and software. DDP's major elements and their relevance to core requirement engineering concerns are summarized. The accompanying research demonstration illustrates DDP's tool support, and further customizations for application to software.

Software-specific customizations↗

Computing Properties of Hadrons, Nuclei and Nuclear Matter from Quantum Chromodynamics

This project was part of a coordinated software development effort which the nuclear physics lattice QCD community pursues in order to ensure that lattice calculations can make optimal use of present, and forthcoming leadership-class and dedicated hardware, including those of the national laboratories, and prepares for the exploitation of future computational resources in the exascale era. The UW team improved and extended software libraries used in lattice QCD calculations related to multi-nucleon systems, enhanced production running codes related to load balancing multi-nucleon production on large-scale computing platforms, and developed SQLite (addressable database) interfaces to efficiently archive and analyze multi-nucleon data and developed a Mathematica interface for the SQLite databases.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Compiler-Assisted Detection of Transient Memory Errors

The probability of bit flips in hardware memory systems is projected to increase significantly as memory systems continue to scale in size and complexity. Effective hardware-based error detection and correction requires that the complete data path, involving all parts of the memory system, be protected with sufficient redundancy. First, this may be costly to employ on commodity computing platforms and second, even on high-end systems, protection against multi-bit errors may be lacking. Therefore, augmenting hardware error detection schemes with software techniques is of consider- able interest. In this paper, we consider software-level mechanisms to comprehensively detect transient memory faults. We develop novel compile-time algorithms to instrument application programs with checksum computation codes so as to detect memory errors. Unlike prior approaches that employ checksums on computational and architectural state, our scheme verifies every data access and works by tracking variables as they are produced and consumed. Experimental evaluation demonstrates that the proposed comprehensive error detection solution is viable as a completely software-only scheme. We also demonstrate that with limited hardware support, overheads of error detection can be further reduced.

def-use analysis↗

An interface between a datametrics 1085A manometer and a Hewlett-Packard 2100S computer

A hardware/software interface designed to mate a Datametrics models 1085A electronic manometer to a Hewlett-Packard (HP) model 2100S computer is described. The software driver operates in the basic control system (BCS) and requires 173 words of memory; the hardware interface uses an HP data source interface (DSI) card which requires one computer input/output channel. Results obtained by incorporating this interface into a data acquisition system indicate that the interface operates successfully.

Hillard, M. E., Jr.↗