Search NASA⌕ Search

SEARCH · Search NASA

Results for “data reconstruction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Inertial measurement unit pre-processors and post-flight STS-1 comparisons

The flight results show that the relative tri-redundant Inertial Measurement Unit IMU performance throughout the entire entry flight was within the expected accuracy. Comparisons are presented which show differences in the accumulated sensed velocity changes as measured by the tri-redundant IMUs (in Mean Equator and Equinox of 1950.0), differences in the equivalent inertial Euler angles as measured with respect to the M50 system, and finally, preliminary instrument calibrations determined relative to the ensemble average measurement set. Also, differences in the derived body axes rates and accelerations are presented. Because of the excellent performance of the IMUs during the STS-1 entry, the selection as to which particular IMU would best serve as the dynamic data source for entry reconstruction is arbitrary.

Findlay, J. T.↗
NASA NTRS1982

Investigation of air transportation technology at Princeton University, 1981

A summary of the air transportation technology program is presented. The following topics were examined: (1) fuel use characteristics of general aviation aircraft; (2) dead-reckoning concept incorporating a fluidic rate sensor; (3) experimentation with an ultrasonic altimeter; (4) development of laser-based collision avoidance systems; (5) flight path reconstruction from sequential DME data; (6) application of fiber optics in flight control systems; and (7) voice recognition inputs for navigation/communication receiver tuning.

Stengel, R. F.↗
NASA NTRS1983

Stability and control over the supersonic and hypersonic speed range

The performance and aerodynamic characteristics of the Space Shuttle Columbia are analyzed over the speed range from Mach 2 to 26 using flight data taken from the first five Space Transportation System flights. These data are used to reconstruct the entry trajectory, calculate vehicle performance, and estimate lateral stability and control derivatives including those assocated with the onboard Reaction Control System. The trajectory reconstruction process is discussed in its relationship to the determination of the vehicle flight characteristics. Vehicle performance results are presented which show that lift and drag were generally overpredicted by 3 percent and that the life-to-drag ratio was underpredicted by 1 percent. Anomalies in pitching-moment trim characteristics are shown and noted to be due to real-gas and Mach-number effects. Lateral stability and control derivatives estimated using programmed test input maneuvers are corrected with preflight predictions and are usually within the uncertainties associated with the predictions. The lateral reaction-control system effectiveness is evaluated.

Compton, H. R.↗
NASA NTRS1984

Description of sunspot cycles by orthogonal functions

Based on the principal component analysis technique and evidence for a 22-yr double-sunspot cycle periodicity. The time series of sunspot numbers is represented as a sum of mutually orthogonal eigenvectors in the time domain. It is shown that the first two eigenvectors account for about 90 percent of the cumulative 'signal power,' and that this is sufficient for reconstruction of the raw data curve. It is also noted that the second eigenvector behaves as the time derivative of the first, and that a phase-plane plot of these eigenvectors (i.e. a plot of a variable vs. its rate of change) suggests that the sun's sunspot cycle is driven by an oscillator; the implication is that, embedded within the sun, a chronometer is at work (e.g. Dicke, 1979).

Teuber, D. L.↗
NASA NTRS1986

Monitoring the spring-summer surface energy budget transition in the Gobi Desert using AVHRR GAC data

A research program has been started in which operationally available weather satellites radiance data are used to reconstruct various properties of the diurnal surface energy budget over sites for which detailed estimates of the complete radiation, heat, and moisture exchange process are available. In this paper, preliminary analysis of the 1985 Gobi Desert summer period results is presented. The findings demonstrate various important relationships concerning the feasibility of retrieving the amplitudes of the diurnal surface energy budget processes for daytime and nighttime conditions.

Smith, Eric A.↗
NASA NTRS1989

Effects from the coupling from below on the lower thermosphere dynamics

Results of wind measurements at the midlatitude ionospheric D region are presented. The wind regime of the lower thermosphere is rather sensitive to stratospheric temperature variations, especially to sudden stratospheric warmings. The longitudinal effect in D region dynamics was revealed on the basis of simultaneous wind measurements at some points located practically at the same latitude but in different climatic regions. The distance differences are observed in the statistical distributions of wind parameters, during winter the average zonal wind speed over East Siberia was about twice that over Central Europe, and the semidiurnal zonal tide is weaker over East Siberia. The data on the seasonal reconstruction of circulation and the response of the D region wind field to the stratospheric warmings depend on the intensity and locations of stratospheric disturbances in relation to the observatory. These experimental facts are interpreted as a meteorological control of the D region and as a dependence of the lower thermosphere dynamics on the conditions of dissipation of internal waves propagating from the troposphere and stratosphere.

Kazimirovsky, E. S.↗
NASA NTRS1988

Stratigraphy and geologic history of Mercury

The geologic evolution of Mercury based on the Mariner-10 mission data is discussed. As reconstructed through photogeological analysis of global geologic relations of rock-stratigraphic units, Mercury's geologic history is shown to involve intensive early impact bombardment and widespread resurfacing by volcanic lavas. Evidence is presented to indicate that this volcanic activity essentially ended as much as 3 Gyr ago, with most of the major geologic events being completed within the first 1 to 1.5 Gyr of Mercurian history.

Spudis, Paul D.↗
NASA NTRS1992

Ulysses navigation at Jupiter encounter

The Ulysses spacecraft encountered Jupiter in February 1992, to provide a gravity assist for its prime mission over the poles of the sun. Orbit determination performed before the nominal final targeting maneuver resulted in the maneuver being cancelled. A surprisingly large Jupiter ephemeris error resulted in a slightly different encounter than planned, but one still meeting requirements. In an accompanying experiment, an alternative method of processing two-way range data was demonstrated, showing that orbit solutions obtained from only range and Doppler data can approach the accuracy of solutions based on Very Long Baseline Interferometry, range and Doppler data. Post-encounter reconstruction of the spacecraft orbit shows that the Jupiter-relative position of the spacecraft is known to within 3 kilometers, and that the Jupiter ephemeris at the time of encounter has an uncertainty of 11, 12, and .8 kilometers in the transverse, normal, and radial directions relative to Jupiter's orbit plane.

Mcelrath, Timothy P.↗
NASA NTRS1992

Coded aperture devices for viewing extended objects from space

Coded aperture sensors for photons or energetic neutral atoms (ENAs), which incorporate FOV limiters and subdivide the object field into a number of elements which is smaller than the number of detector pixels, are described. A least squares fit to the data is made in reconstructing the object field. To evaluate the optics and reconstruction algorithms, two 'breadboard' sensors have been constructed, one based on a film camera and the other upon a UV-light sensitive microchannel plate detector system. Results obtained thus far show that the concept is viable, and no special difficulties should be encountered in adapting the detector geometries to neutral particle imaging systems. Charged particle deflection plates could be incorporated into the region between the FOV limiter and the aperture, or installed ahead of the limiter.

Curtis, C. C.↗
NASA NTRS1992

Upper Atmosphere Research Satellite (UARS) Microwave Limb Sounder (MLS) mapping - Validation, early results and applications

The results of limitation studies performed with the UARS MLS are presented. A consistent set of algorithms allows the extraction of the spectral coefficients in time and longitude from asynoptically sampled satellite data and the subsequent reconstruction of synoptic maps from that spectral information. In addition to providing synoptic maps, the asynoptic technique allows the use of standard spectral analysis tools such as autocorrelation and cross correlation.

Elson, Lee S.↗
NASA NTRS1994

Comparison of predicted and actual orbital lifetimes for the SEDS-2 mission

This paper documents a series of estimates of the orbital lifetime of the SEDS-2 flight configuration made prior to the mission. These estimates were made with program LTIME, which has been in use at MSFC for a number of years. Because of the unusual configuration of upper-stage/tether/endmass flown on this mission, and the type of assumptions and inputs used in LTIME, the effective area used in the drag calculation had to be estimated in an unusual way. The final pre-flight predicted lifetime was 28.35 days. In the actual flight, the tether was cut approximately 5 days into the mission. The instrumented endmass plus about 12 km of tether rapidly reentered the atmosphere, and the Delta II Second Stage plus the remaining 8 km of tether reentered on mission day 60. Tracking data was used to reconstruct reentry sequences for the two parts of the configuration after the cut. The predicted lifetimes for the endmass plus tether-fragment were in the range of 0.2 to 2.8 days, depending on the perigee altitudes assumed. The predicted lifetime of the upper-stage plus tether was 56.4 days, which corresponds to reentry on mission day 61, in good agreement with the actual reentry on day 60.

Evans, Steven W.↗
NASA NTRS1999

Reconstruction of the 1997/1998 El Nino from TOPEX/POSEIDON and TOGA/TAO Data Using a Massively Parallel Pacific-Ocean Model and Ensemble Kalman Filter

Two massively parallel data assimilation systems in which the model forecast-error covariances are estimated from the distribution of an ensemble of model integrations are applied to the assimilation of 97-98 TOPEX/POSEIDON altimetry and TOGA/TAO temperature data into a Pacific basin version the NASA Seasonal to Interannual Prediction Project (NSIPP)ls quasi-isopycnal ocean general circulation model. in the first system, ensemble of model runs forced by an ensemble of atmospheric model simulations is used to calculate asymptotic error statistics. The data assimilation then occurs in the reduced phase space spanned by the corresponding leading empirical orthogonal functions. The second system is an ensemble Kalman filter in which new error statistics are computed during each assimilation cycle from the time-dependent ensemble distribution. The data assimilation experiments are conducted on NSIPP's 512-processor CRAY T3E. The two data assimilation systems are validated by withholding part of the data and quantifying the extent to which the withheld information can be inferred from the assimilation of the remaining data. The pros and cons of each system are discussed.

Keppenne, C. L.↗
NASA NTRS2000

Near-Infrared Interferometric Images of the Solar System Sized Disk Surrounding the Herbig Ae/Be Star MWC 349A

We present images of the Herbig Ae/Be star MWC 349A at 1.65 and 2.27, and 3.08 micrometers, reconstructed from complex visibility data obtained with an aperture masking interferometric technique on the Keck I telescope. These images have an approximately elliptical shape, and are consistent with the expected shape of a nearly edge-on Keplerian disk. Visibility data were fitted with uniform ellipses with major axes 36 +/- 2, 47 +/- 2, and 62 +/- 1 mas, respectively. The axial ratio of the ellipses is approximately 0.5 +/- 0.1, and the major axis is at a position angle of 100 +/- 3 degrees, consistent with the position angle of the dark lane observed previously in the Very Large Array (VLA) radio continuum maps at 8 and 22 GHz, perpendicular to the symmetry axis of the bipolar lobes of H66(alpha) recombination line emission, and consistent with positions of the recombination line maser spots at 1.3 mm. At an assumed distance of 1.2 kpc, the linear sizes of the disk are 44 and 57 AU at 1.65 and 2.2 micrometers, respectively. The disk is the presumed source of ionized material in the bipolar outflow and ultracompact HII region around the star.

Danchi, W.C.↗
NASA NTRS1990

Earth benefits from space life sciences

Contributions of space exploration which are widely recognized are those dealing with the impact of space technology on public health and medical services in both urban and remote rural areas. Telecommunications, image enhancement, 3-dimensional image reconstructions, miniaturization, automation, and data analysis, have transformed the delivery of medical care and have brought about a new impetus to the field of biomedicine. Many areas of medical care and biological research have been affected. These include technological breakthroughs in such areas as: (1) diagnosis, treatment, and prevention of cardiovascular diseases, (2) new approaches to the understanding of osteoporosis, (3) early detection of genetic birth defects, (4) emergency medical care, and (5) treatment of chronic metabolic disorders. These are but a few examples where technology originally developed to support space medicine or space research has been applied to solving medical and health care delivery problems on Earth.

NASA Center HQS↗
NASA NTRS2009

Amplitude Metrics for Field Retrieval with Hard-Edged and Uniformly Illuminated Apertures

In field retrieval, the amplitude and phase of the generalized pupil function for an optical system are estimated from multiple defocused measurements of the system point-spread function. A baseline field reconstruction algorithm optimizing a data consistency metric is described. Additionally, two metrics specifically designed to incorporate a priori knowledge about pupil amplitude for hard-edged and uniformly illuminated aperture systems are given. Experimental results demonstrate the benefit of using these amplitude metrics in addition to the baseline metric

Thurman, Samuel T.↗
NASA NTRS2004

Materials Analysis: A Key to Unlocking the Mystery of the Columbia Tragedy

Materials analyses of key forensic evidence helped unlock the mystery of the loss of space shuttle Columbia that disintegrated February 1, 2003 while returning from a 16-day research mission. Following an intensive four-month recovery effort by federal, state, and local emergency management and law officials, Columbia debris was collected, catalogued, and reassembled at the Kennedy Space Center. Engineers and scientists from the Materials and Processes (M&P) team formed by NASA supported Columbia reconstruction efforts, provided factual data through analysis, and conducted experiments to validate the root cause of the accident. Fracture surfaces and thermal effects of selected airframe debris were assessed, and process flows for both nondestructive and destructive sampling and evaluation of debris were developed. The team also assessed left hand (LH) airframe components that were believed to be associated with a structural breach of Columbia. Analytical data collected by the M&P team showed that a significant thermal event occurred at the left wing leading edge in the proximity of LH reinforced carbon carbon (RCC) panels 8 and 9. The analysis also showed exposure to temperatures in excess of 1,649 C, which would severely degrade the support structure, tiles, and RCC panel materials. The integrated failure analysis of wing leading edge debris and deposits strongly supported the hypothesis that a breach occurred at LH RCC panel 8.

Mayeaux, Brian M.↗
NASA NTRS2016

Forward Skirt Structural Testing on the Space Launch System (SLS) Program

Structural testing was performed to evaluate heritage forward skirts from the Space Shuttle program for use on the Space Launch System (SLS) program. One forward skirt is located in each solid rocket booster. Heritage forward skirts are aluminum 2219 welded structures. Loads are applied at the forward skirt thrust post and ball assembly. Testing was needed because SLS ascent loads are roughly 40% higher than Space Shuttle loads. Testing objectives were to determine margins of safety, demonstrate reliability, and validate analytical models. Two forward skirts were structurally tested using the test configuration. The test stand applied loads to the thrust post. Four hydraulic actuators were used to apply axial load and two hydraulic actuators were used to apply radial and tangential loads. The first test was referred to as FSTA-1 (Forward Skirt Structural Test Article) and was performed in April/May 2014. The purpose of FSTA-1 was to verify the ultimate capability of the forward skirt subjected to ascent ultimate loads. Testing consisted of two liftoff load cases taken to 100% limit load followed by an ascent load case taken to 110% limit load. The forward skirt was unloaded to no load after each test case. Lastly, the forward skirt was tested to 140% limit and then to failure using the ascent loads. The second test was referred to as FSTA-2 and performed in July/August of 2014. The purpose of FSTA-2 was to verify the ultimate capability of the forward skirt subjected to liftoff ultimate loads. Testing consisted of six liftoff load cases taken to 100% limit load followed by the six liftoff cases taken to 140% limit load. Two ascent load cases were then tested to 100% limit load. The forward skirt was unloaded to no load after each test case. Lastly, the forward skirt was tested to 140% limit and then to failure using the ascent loads. The forward skirts on FSTA-1 and FSTA-2 successfully carried all applied liftoff and ascent load cases. Both FSTA-1 and FSTA-2 were tested to failure by increasing the ascent loads. Failure occurred in the forward skirt thrust post radius. The forward skirts on FSTA-1 and FSTA-2 had nearly identical failure modes. FSTA-1 failed at 1.72 times limit load and FSTA-2 failed at 1.62 times limit load. This difference is primarily attributed to variation in material properties in the thrust post region. Test data were obtained from strain gages, deflection gages, ARAMIS digital strain measurement, acoustic emissions, and high-speed video. Strain gage data and ARAMIS strain were compared to finite element (FE) analysis predictions. Both the forward skirt and tooling were modeled. This allows the analysis to simulate the loading as close as possible to actual test configuration. FSTA-1 and FSTA-2 were instrumented with over 200 strain gages to ensure all possible failure modes could be captured. However, it turned out that three gages provided critical strain data. One was located in the post bore and two on the post radius. More gages were not specified due to space limitations and the desire to not interfere with the use of the ARAMIS system on the post radius. Measured strains were compared to analysis results for the load cycle to failure. Note that FSTA-1 gages were lost before failure was reached. FSTA-2 gages made it to the failure load but one of the radius gages was lost before testing began. This gage was not replaced because of the time and cost associated with disassembly of the test structure. Correlation to analysis was excellent for FSTA-1. FSTA-2 was not quite as good because there was more residual strain from previous load cycles. FSTA-2 was loaded and unloaded with 12 liftoff cases and two ascent cases before taking the skirt to failure. FSTA-1 only had two liftoff cases and one ascent case before taking the skirt to failure. The ARAMIS system was used to determine strain at the post radius by processing digital images of a speckled paint pattern. Digital cameras recorded images of the speckled paint pattern. ARAMIS strain results for FSTA-2 just prior to failure. Note a high strain location develops near the left side. This high strain compares well to analysis prediction for both FSTA-1 and FSTA-2. The strain at this location was also plotted versus limit load. Both FSTA-1 and FSTA-2 had excellent correlation between ARAMIS and analysis strains. Acoustic emission (AE) sensors were used to monitor for damage formation that may occur during testing (e.g., crack formation and growth or propagation). AE was very important because after disassembly of FSTA-1, a crack was observed in the ball fitting radius. The ball fitting did not crack on FSTA-2. AE data was used to reconstruct when the crack occurred. The AE energy versus time plot for FSTA. The energy increased considerably at 850 seconds (152% limit load), indicating a crack could have formed at this point. The only visual evidence found that could have corresponded to this was the crack that initiated in the ball fitting. The cracks in the forward skirt aluminum structures would likely have been lower energy due to a lower modulus and all that were found after failure correlated to occurring after the initial crack in the post radius. This was verified by high-speed cameras used to record the failure.

Lohrer, J. D.↗
NASA NTRS2016

Coronal Polarization of Pseudostreamers and the Solar Polar Field Reversal

The reversal of the solar polar magnetic field is notoriously hard to pin down due to the extreme viewing angle of the pole. In Cycle 24, the southern polar field reversal can be pinpointed with high accuracy due to a large-scale pseudostreamer that formed over the pole and persisted for approximately a year. We tracked the size and shape of this structure with multiple observations and analysis techniques including PROBA2/SWAP EUV images, AIA EUV images, CoMP polarization data, and 3D tomographic reconstructions. We find that the heliospheric field reversed polarity in February 2014, whereas in the photosphere, the last vestiges of the previous polar field polarity remained until March 2015. We present here the evolution of the structure and describe its identification in the Fe XII 1074nm coronal emission line, sensitive to the Hanle effect in the corona.

magnetic field↗