Search NASA⌕ Search

SEARCH · Search NASA

Results for “data smoothing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Gravitational spectra from direct measurements

A simple rapid method is described for determining the spectrum of a surface field (in spherical harmonics) from harmonic analysis of direct (in situ) measurements along great circle arcs. The method is shown to give excellent overall trends (smoothed spectra) to very high degree from even a few short arcs of satellite data. Three examples are taken with perfect measurements of satellite tracking over a planet made up of hundreds of point masses using (1) altimetric heights from a low-orbiting spacecraft, (2) velocity (range rate) residuals between a low and a high satellite in circular orbits, and (3) range rate data between a station at infinity and a satellite in a highly eccentric orbit. In particular, the smoothed spectrum of the earth's gravitational field is determined to about degree 400(50-km half wavelength) from 1 x 1 deg gravimetry and the equivalent of 11 revolutions of GEOS 3 and Skylab altimetry. This measurement shows that there is about 46 cm of geoid height (rms worldwide) remaining in the field beyond degree 180.

Wagner, C. A.↗

Polar motion from laser range measurements of GEOS-3

Using two-day arcs of GEOS-3 laser data, simultaneous solutions for pole position components, x sub p and y sub p, and orbit elements have been obtained for the period spanning 3 February to 6 March 1976 using three NASA Goddard Space Flight Center laser stations located near Washington, D.C. (STALAS) and on the islands of Bermuda and Grand Turk. The results are in general agreement with the BIH results. However, because of the locations of the laser sites, the x sub p solution is weaker than the y sub p solution. The x sub p and y sub p estimates were smoothed with a straight line by weighted least squares using the variance associated with the pole estimates as weights in order to reflect the effect of widely different data distributions. The smoothed y sub p differs by one meter with respect to the BIH smoothed values and the smoothed x sub p differs by about two meters. Spectral analysis of the results has identified frequencies associated with the orbital motion indicating the need for further improvements in the model of the physical system.

Schutz, B. E.↗

Reliable and Efficient Machine Learning (Final Technical Report)

Modern scientific experiments generate massive amounts of data at a pace much faster than humans can manually analyze. While machine learning has revolutionized commercial data analysis (such as recommending movies or recognizing faces), applying these tools to complex scientific discovery is challenging because scientific answers must be precise, interpretable, and adhere to physical laws. The research under this project aims to develop new mathematical tools and computer algorithms specifically designed for scientific applications. Major progress has been made in automatically cleaning and deconstructing messy experimental data, analyzing the visual information of physical phenomena, determining the underlying physical variables, and providing rig orous mathematical analysis of interesting algorithms and concepts widely used in machine learning. This project addressed the critical gap between our ability to generate massive scientific data and our ability to extract interpretable information from it. We established mathematical foundations for Scientific Machine Learning (SciML) aimed at effective data analytics and automated discovery. Our work focused on three core objectives: (1) developing reliable feature extraction methods for dynamic high-dimensional data, (2) establishing mathematical foundations for discovering dynamics via neural networks, and (3) creating rigorous optimization techniques for these models. Key outcomes come from two fronts. On the practical side, they include the development of algorithms that significantly enhance the extraction of signals from field data, as well as the capability to handle situations that exhibit smooth variations or physical stretching due to temperature changes. They also include the creation of an automated framework for discovering fundamental state variables from raw experimental data, demonstrating the ability to identify intrinsic physical dimensions without prior knowledge of the governing laws. On the theoretical front, the research results in theoretical advances in Optimal Transport, a widely used notion in SciML, specifically regarding functions with fixed-size nodal sets, provide sharp bounds relevant to uncertainty quantification. Meanwhile, the outcomes also include the establishment of convergence theories for nonlocal gradient descent methods, enabling robust optimization with noisy data in high-dimensional settings commonly encountered in scientific modeling. The project also helps creating opportunities to train the next generation of researchers, equipping them with the necessary technical skills for today’s workplace and preparing them for future advances.

97 MATHEMATICS AND COMPUTING↗

FOREGROUND MODEL AND ANTENNA CALIBRATION ERRORS IN THE MEASUREMENT OF THE SKY-AVERAGED λ21 cm SIGNAL AT z∼ 20

The most promising near-term observable of the cosmic dark age prior to widespread reionization (z ∼ 15-200) is the sky-averaged λ21 cm background arising from hydrogen in the intergalactic medium. Though an individual antenna could in principle detect the line signature, data analysis must separate foregrounds that are orders of magnitude brighter than the λ21 cm background (but that are anticipated to vary monotonically and gradually with frequency, e.g., they are considered {sup s}pectrally smooth{sup )}. Using more physically motivated models for foregrounds than in previous studies, we show that the intrinsic spectral smoothness of the foregrounds is likely not a concern, and that data analysis for an ideal antenna should be able to detect the λ21 cm signal after subtracting a ∼fifth-order polynomial in log ν. However, we find that the foreground signal is corrupted by the angular and frequency-dependent response of a real antenna. The frequency dependence complicates modeling of foregrounds commonly based on the assumption of spectral smoothness. Our calculations focus on the Large-aperture Experiment to detect the Dark Age, which combines both radiometric and interferometric measurements. We show that statistical uncertainty remaining after fitting antenna gain patterns to interferometric measurements is not anticipated to compromise extraction of the λ21 cm signal for a range of cosmological models after fitting a seventh-order polynomial to radiometric data. Our results generalize to most efforts to measure the sky-averaged spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

Real-time estimation of the electron temperature profile in DIII-D by leveraging neural-network surrogate models

Control of both the magnitude and the shape of tokamak profiles will be necessary to achieve stable, high-performance plasmas. In order to reject disturbances in real time, feedback-control algorithms rely on accurate real-time knowledge of the plasma state. When diagnostics alone are insufficient, either because they are limited in number or their measurements are too noisy, observers can be used to combine diagnostic data with a response model to provide a better estimation of different plasma properties. An observer has been developed to estimate the electron temperature profile in real time using both diagnostic data from the Thomson scattering system and a model based on the electron heat transport equation describing the evolution of the electron temperature profile. Here, neural network surrogate models are leveraged to help improve the overall model prediction while staying within computation time constraints for real-time use. The observer algorithm is shown in offline tests to produce smooth profiles that are consistent with both the diagnostic data and the electron heat transport equation. When implemented into the real-time plasma control system, this observer will provide valuable information on the electron temperature profile to many potential feedback-control applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutral sheet crossings by ISEE-3 in the distant magnetotail

Magnetic field data from ISEE-3 in the distant magnetotail at crossings of the field reversal (or neutral sheet) region were analyzed to determine the instantaneous direction of the normal component Bz at the crossing. A crossing identified as being almost always tailward of the steady-state X-line was selected. Data for 1 hr are discussed to illustrate difficulties. One particular smooth crossing shows that complicated microstructure can occur in times less than 1 min. Averaging over long times may eliminate essential information. Inspection of the magnetic field data at the highest resolution, however, shows that the direction of the plasma sheet flows and the sense of Bz across the neutral sheet do not always agree with the reconnection models. Rather, they indicate that the low latitude boundary layer may play a significant role in the dynamics of the magnetotail.

Heikkila, W. J.↗

Flying-hot-wire study of two-dimensional mean flow past an NACA 4412 airfoil at maximum lift

Hot-wire measurements have been made in the boundary layer, the separated region, and the near wake for flow past an NACA 4412 airfoil at maximum lift. The Reynolds number based on chord was about 1,500,000. The main instrumentation was a hot-wire probe mounted on the end of a rotating arm. A digital computer was used to control synchronized sampling of hot-wire data at closely spaced points along the probe arc. Ensembles of data were obtained at several thousand locations in the flow field. The data include intermittency, two components of mean velocity, and twelve mean values for double, triple, and quadruple products of two velocity fluctuations. The data are available on punched cards in raw form and also after use of smoothing and interpolation routines to obtain values on a fine rectangular grid aligned with the airfoil chord. The data are displayed in the paper as contour plots.

Coles, D.↗

Time varying, multivariate volume data reduction

Large-scale supercomputing is revolutionizing the way science is conducted. A growing challenge, however, is understanding the massive quantities of data produced by large-scale simulations. The data, typically time-varying, multivariate, and volumetric, can occupy from hundreds of gigabytes to several terabytes of storage space. Transferring and processing volume data of such sizes is prohibitively expensive and resource intensive. Although it may not be possible to entirely alleviate these problems, data compression should be considered as part of a viable solution, especially when the primary means of data analysis is volume rendering. In this paper we present our study of multivariate compression, which exploits correlations among related variables, for volume rendering. Two configurations for multidimensional compression based on vector quantization are examined. We emphasize quality reconstruction and interactive rendering, which leads us to a solution using graphics hardware to perform on-the-fly decompression during rendering. In this paper we present a solution which addresses the need for data reduction in large supercomputing environments where data resulting from simulations occupies tremendous amounts of storage. Our solution employs a lossy encoding scheme to acrueve data reduction with several options in terms of rate-distortion behavior. We focus on encoding of multiple variables together, with optional compression in space and time. The compressed volumes can be rendered directly with commodity graphics cards at interactive frame rates and rendering quality similar to that of static volume renderers. Compression results using a multivariate time-varying data set indicate that encoding multiple variables results in acceptable performance in the case of spatial and temporal encoding as compared to independent compression of variables. The relative performance of spatial vs. temporal compression is data dependent, although temporal compression has the advantage of offering smooth animations, while spatial compression can handle volumes of larger dimensions.

97 MATHEMATICS AND COMPUTING↗

Phenological Parameters Estimation Tool

The Phenological Parameters Estimation Tool (PPET) is a set of algorithms implemented in MATLAB that estimates key vegetative phenological parameters. For a given year, the PPET software package takes in temporally processed vegetation index data (3D spatio-temporal arrays) generated by the time series product tool (TSPT) and outputs spatial grids (2D arrays) of vegetation phenological parameters. As a precursor to PPET, the TSPT uses quality information for each pixel of each date to remove bad or suspect data, and then interpolates and digitally fills data voids in the time series to produce a continuous, smoothed vegetation index product. During processing, the TSPT displays NDVI (Normalized Difference Vegetation Index) time series plots and images from the temporally processed pixels. Both the TSPT and PPET currently use moderate resolution imaging spectroradiometer (MODIS) satellite multispectral data as a default, but each software package is modifiable and could be used with any high-temporal-rate remote sensing data collection system that is capable of producing vegetation indices. Raw MODIS data from the Aqua and Terra satellites is processed using the TSPT to generate a filtered time series data product. The PPET then uses the TSPT output to generate phenological parameters for desired locations. PPET output data tiles are mosaicked into a Conterminous United States (CONUS) data layer using ERDAS IMAGINE, or equivalent software package. Mosaics of the vegetation phenology data products are then reprojected to the desired map projection using ERDAS IMAGINE

McKellip, Rodney D.↗

Global gross primary production simulated by three terrestrial biosphere models to analyse smoothing of limiting rates

Processed global terrestrial gross primary production (GPP) from three terrestrial biosphere models (TBMs). Two simulations were run with each model, one that selects the rate limiting process of photosynthesis based on the minimum of the potential rates (following Farquhar et al. 1980) and the other that uses quadratic smoothing between the potential rates (following Collatz et al. 1991). The three TBMs are: 1) the Energy Exascale Earth System Model (E3SM) land model (ELM) (release: v1.1.0) (Burrows et al., 2020), a coupled carbon, nitrogen, and phosphorus model with sun/shade big-leaf canopy photosynthesis scaling. 2) The Functionally Assembled Terrestrial Ecosystem Simulator (FATES, tag: sci.1.30.0_api.8.0.0) (Koven et al., 2019), coupled with the Community Land Model (CLM, version 5; Lawrence et al., 2019), a carbon-only vegetation demography model with multi-leaf and multi-canopy layers for scaling photosynthesis, and with a leaf area index (LAI) optimisation scheme. 3) The Sheffield Dynamic Global Vegetation Model (SDGVM, tag: Walkeretal2020_GCB), a carbon-only model with multi-leaf-layer canopy photosynthesis scaling and also with an LAI optimisation scheme (Walker et al., 2017; Woodward & Lomas, 2004). These data were generated to evaluate the effect of Collatz smoothing of limiting rates on simulated GPP across a range of terrestrial biosphere models. Analysis of results can be found in Walker et al. (2020). This dataset is comprised of R scripts to process data and produce figures and .RDS files, a binary format specific to R and read with the 'readRDS' function.

54 ENVIRONMENTAL SCIENCES↗

Efficient Implementation of an Optimal Interpolator for Large Spatial Data Sets

Scattered data interpolation is a problem of interest in numerous areas such as electronic imaging, smooth surface modeling, and computational geometry. Our motivation arises from applications in geology and mining, which often involve large scattered data sets and a demand for high accuracy. The method of choice is ordinary kriging. This is because it is a best unbiased estimator. Unfortunately, this interpolant is computationally very expensive to compute exactly. For n scattered data points, computing the value of a single interpolant involves solving a dense linear system of size roughly n x n. This is infeasible for large n. In practice, kriging is solved approximately by local approaches that are based on considering only a relatively small'number of points that lie close to the query point. There are many problems with this local approach, however. The first is that determining the proper neighborhood size is tricky, and is usually solved by ad hoc methods such as selecting a fixed number of nearest neighbors or all the points lying within a fixed radius. Such fixed neighborhood sizes may not work well for all query points, depending on local density of the point distribution. Local methods also suffer from the problem that the resulting interpolant is not continuous. Meyer showed that while kriging produces smooth continues surfaces, it has zero order continuity along its borders. Thus, at interface boundaries where the neighborhood changes, the interpolant behaves discontinuously. Therefore, it is important to consider and solve the global system for each interpolant. However, solving such large dense systems for each query point is impractical. Recently a more principled approach to approximating kriging has been proposed based on a technique called covariance tapering. The problems arise from the fact that the covariance functions that are used in kriging have global support. Our implementations combine, utilize, and enhance a number of different approaches that have been introduced in literature for solving large linear systems for interpolation of scattered data points. For very large systems, exact methods such as Gaussian elimination are impractical since they require 0(n(exp 3)) time and 0(n(exp 2)) storage. As Billings et al. suggested, we use an iterative approach. In particular, we use the SYMMLQ method, for solving the large but sparse ordinary kriging systems that result from tapering. The main technical issue that need to be overcome in our algorithmic solution is that the points' covariance matrix for kriging should be symmetric positive definite. The goal of tapering is to obtain a sparse approximate representation of the covariance matrix while maintaining its positive definiteness. Furrer et al. used tapering to obtain a sparse linear system of the form Ax = b, where A is the tapered symmetric positive definite covariance matrix. Thus, Cholesky factorization could be used to solve their linear systems. They implemented an efficient sparse Cholesky decomposition method. They also showed if these tapers are used for a limited class of covariance models, the solution of the system converges to the solution of the original system. Matrix A in the ordinary kriging system, while symmetric, is not positive definite. Thus, their approach is not applicable to the ordinary kriging system. Therefore, we use tapering only to obtain a sparse linear system. Then, we use SYMMLQ to solve the ordinary kriging system. We show that solving large kriging systems becomes practical via tapering and iterative methods, and results in lower estimation errors compared to traditional local approaches, and significant memory savings compared to the original global system. We also developed a more efficient variant of the sparse SYMMLQ method for large ordinary kriging systems. This approach adaptively finds the correct local neighborhood for each query point in the interpolation process.

Memarsadeghi, Nargess↗

Symmetries, charges and conservation laws at causal diamonds in general relativity

We study the covariant phase space of vacuum general relativity at the null boundary of causal diamonds. The past and future components of such a null boundary each have an infinite-dimensional symmetry algebra consisting of diffeomorphisms of the 2-sphere and boost super-translations corresponding to angle-dependent rescalings of affine parameter along the null generators. Associated to these symmetries are charges and fluxes obtained from the covariant phase space formalism using the prescription of Wald and Zoupas. By analyzing the behavior of the spacetime metric near the corners of the causal diamond, we show that the fluxes are also Hamiltonian generators of the symmetries on phase space. In particular, the super-translation fluxes yield an infinite family of boost Hamiltonians acting on the gravitational data of causal diamonds. We show that the smoothness of the vector fields representing such symmetries at the bifurcation edge of the causal diamond implies suitable matching conditions between the symmetries on the past and future components of the null boundary. Similarly, the smoothness of the spacetime metric implies that the fluxes of all such symmetries are conserved between the past and future components of the null boundary. This establishes an infinite set of conservation laws for finite subregions in gravity analogous to those at null infinity. We also show that the symmetry algebra at the causal diamond has a non-trivial center corresponding to constant boosts. The central charges associated to these constant boosts are proportional to the area of the bifurcation edge, for any causal diamond, in analogy with the Wald entropy formula.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Condensation pressure drop of HFC-134a and R-404A in a smooth and micro-fin U-tube

The frictional pressure drop during condensation of HFC-134a and R-404A in a smooth (8.56 mm ID) and micro-fin U-tubes (8.96 mm ID) are experimentally investigated. Different from previous studies, the present experiments are performed for various condensing temperatures. The test runs are done at average saturated condensing temperatures ranging from 35 C to 60 C. The mass fluxes are between 90 and 800 kg/m{sup 2}s. The experimental results indicate that the average frictional pressure drop increases with mass flux but decreases with increasing condensing temperature for both smooth and micro-fin-tubes. The average frictional pressure drops of HFC-134a and R-404A for the micro-fin-tubes were 1-1.7 and 1-2.1 times larger than that in smooth tube respectively. New correlations based on the data gathered during the experimentation for predicting frictional pressure drop are proposed for wide range of operating conditions. (author)

42 ENGINEERING↗

Adsorbate-driven morphological changes on Cu(111) nano-pits

Adsorbate-driven morphological changes of pitted-Cu(111) surfaces have been investigated following the adsorption and desorption of CO and H. The morphology of the pitted-Cu(111) surfaces, prepared by Ar + sputtering, exposed a few atomic layers deep nested hexagonal pits of diameters from 8 to 38 nm with steep step bundles. The roughness of pitted-Cu(111) surfaces can be healed by heating to 450-500 K in vacuum. Adsorption of CO on the pitted-Cu(111) surface leads to two infrared peaks at 2089-2090 and 2101-2105 cm -1 for CO adsorbed on under-coordinated sites in addition to the peak at 2071 cm -1 for CO adsorbed on atop sites of the close-packed Cu(111) surface. CO adsorbed on under-coordinated sites is thermally more stable than that of atop Cu(111) sites. Annealing of the CO-covered surface from 100 to 300 K leads to minor changes of the surface morphology. In contrast, annealing of a H covered surface to 300 K creates a smooth Cu(111) surface as deduced from infrared data of adsorbed CO and scanning tunnelling microscopy (STM) imaging. The observation of significant adsorbate-driven morphological changes with H is attributed to its stronger modification of the Cu(111) surface by the formation of a sub-surface hydride with a hexagonal structure, which relaxes into the healed Cu(111) surface upon hydrogen desorption. These morphological changes occur ~150 K below the temperature required for healing of the pitted-Cu(111) surface by annealing in vacuum. In contrast, the adsorption of CO, which only interacts with the top-most Cu layer and desorbs by 160 K, does not significantly change the morphology of the pitted-Cu(111) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of fatigue-crack growth rates by polynomial curve fitting

Fundamental characterization of the constant-amplitude fatigue crack propagation is achieved by an analysis of the rate of change of crack length with change in number of applied loading cycles, defining the rate values such that they are consistent with the basic assumption of smoothness and continuity in the fatigue crack growth process. The technique used to satisfy the analytical conditions and minimize the effects of local material anomalies and experimental errors is that of fitting a smooth curve to the entire set of basic data by least square regression. This yields a well-behaved function relating the number of cycles to the crack length. By taking the first derivative of the function, the crack growth rate is obtained for each point. The class of curve fitting functions used in the analysis is the polynomial of degree n.

Davies, K. B.↗

Computerized processing of data from Interkosmos-7 and Interkosmos-8 satellite experiments

Computerized data processing problems are analyzed using telemetry data received from Intercosmos-7 and Intercosmos-8 satellites. Problems related to the restoration of measurement data in the form of piecewise continuous and smooth calibrated functions of time and problems encountered in the scientific interpretation of the experimental results are considered. Curve smoothing is discussed in the case of distinct assignments of calibration levels, synchronization, and synchronization checks over time. A proposal is presented for checking a piecewise linear function providing a simple method for the elimination of isolated values due to channel failures and the separation of individual intervals.

Pfau, H.↗

Ground effects on Loran-C signals

In conjunction with the test and evaluation of the position fixing capabilities of the Army Manpack Loran Receiver AN/PSN-6, an extensive series of time difference and signal amplitude measurements were made within a 100 km map grid square encompassing Fort Monmouth, New Jersey. The test location is within the coverage area of the East Coast Loran-C Chain. The data were used to develop a simple smooth-earth model for the test area as well as to estimate the magnitude and distributions of deviations from this model. Local propagation processes associated with topographic features and the grid of overhead wires in the test area are shown to contribute to the deviations from the model.

Pearce, D. C.↗

An investigation of the compressive strength of Kevlar 49/epoxy composites

Tests were performed to evaluate the effect of a wide range of variables including matrix properties, interface properties, fiber prestressing, secondary reinforcement, and others on the ultimate compressive strength of Kevlar 49/epoxy composites. Scanning electron microscopy is used to assess the resulting failure surfaces. In addition, a theoretical study is conducted to determine the influence of fiber anisotropy and lack of perfect bond between fiber and matrix on the shear mode microbuckling. The experimental evaluation of the effect of various constituent and process characteristics on the behavior of these unidirectional composites in compression did not reveal any substantial increase in strength. However, theoretical evaluations indicate that the high degree of fiber anisotropy results in a significant drop in the predicted stress level for internal instability. Scanning electron microscope data analysis suggests that internal fiber failure and smooth surface debonding could be responsible for the measured low compressive strengths.

Kulkarni, S. V.↗