Search NASA⌕ Search

SEARCH · Search NASA

Results for “depth profiles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Chemical interaction of B{sub 4}C, B, and C with Mo/Si layered structures

To enhance the thermal stability, B{sub 4}C diffusion barrier layers are often added to Mo/Si multilayer structures for extreme ultraviolet optics. Knowledge about the chemical interaction between B{sub 4}C and Mo or Si, however is largely lacking. Therefore, the chemical processes during annealing up to 600 deg. C of a Mo/B{sub 4}C/Si layered structure have been investigated in situ with hard x-ray photoelectron spectroscopy and ex situ with depth profiling x-ray photoelectron spectroscopy. Mo/B/Si and Mo/C/Si structures have also been analyzed as reference systems. The chemical processes in these systems have been identified, with two stages being distinguished. In the first stage, B and C diffuse and react predominantly with Mo. MoSi{sub x} forms in the second stage. If the diffusion barrier consists of C or B{sub 4}C, a compound forms that is stable up to the maximum probed temperature and annealing time. We suggest that the diffusion barrier function of B{sub 4}C interlayers as reported in literature can be caused by the stability of the formed compound, rather than by the stability of B{sub 4}C itself.

36 MATERIALS SCIENCE↗

Deuterium retention in tungsten exposed to low-energy pure and helium-seeded deuterium plasmas

Influence of helium (He) on the deuterium (D) retention in tungsten (W) under simultaneous He-D plasma exposure was investigated. Bulk polycrystalline tungsten and two W coatings on carbon substrate, namely, plasma-sprayed tungsten and combined magnetron-sputtered and ion implanted tungsten (CMSII-W) were exposed to pure and He-seeded D plasmas generated by electron-cyclotron-resonance plasma source. The D retention in each sample was subsequently analyzed by various methods such as nuclear reaction analysis for the D depth profiling up to 6 {mu}m and thermal desorption spectroscopy for the determination of total amount of D retention. It is shown that seeding of helium into D plasma with helium ion flux fraction of 10% reduces the deuterium retention for all tungsten grades but more significant reduction was observed for polycrystalline W and less significant effect was found for W coatings. From the thermal desorption spectroscopy measurements, we conclude that the presence of He modifies the density of existing traps for D but does not modify the nature of traps. Maximum effect of a reduction in the deuterium retention due to helium seeding was observed at around 500 K for bulk polycrystalline W. Mechanisms of deuterium retention and He effect in different W materials are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cu penetration into low-k dielectric during deposition and bias-temperature stress

Cu penetration into low-k dielectrics can cause serious reliability issues in on-chip interconnect systems. Using secondary ion mass spectrometry with both front-side and back-side depth profiling strategies, Cu was found to diffuse into SiCOH low-k dielectric in a Cu/SiCOH/Si capacitor during Cu deposition. After bias-temperature stressing the capacitor at 270 deg. C and 2.5 MV/cm, Cu penetrates further into SiCOH, but its distribution profile is the same as that after the same temperature annealing without electrical bias, suggesting no Cu ion drift. The implication of these findings on the Cu/low-k dielectric time-dependent dielectric breakdown modeling is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Commissioning and Validation of the First Monte Carlo Based Dose Calculation Algorithm Commercial Treatment Planning System in Mexico

This work presents the beam data commissioning and dose calculation validation of the first Monte Carlo (MC) based treatment planning system (TPS) installed in Mexico. According to the manufacturer specifications, the beam data commissioning needed for this model includes: several in-air and water profiles, depth dose curves, head-scatter factors and output factors (6x6, 12x12, 18x18, 24x24, 42x42, 60x60, 80x80 and 100x100 mm{sup 2}). Radiographic and radiochromic films, diode and ionization chambers were used for data acquisition. MC dose calculations in a water phantom were used to validate the MC simulations using comparisons with measured data. Gamma index criteria 2%/2 mm were used to evaluate the accuracy of MC calculations. MC calculated data show an excellent agreement for field sizes from 18x18 to 100x100 mm{sup 2}. Gamma analysis shows that in average, 95% and 100% of the data passes the gamma index criteria for these fields, respectively. For smaller fields (12x12 and 6x6 mm{sup 2}) only 92% of the data meet the criteria. Total scatter factors show a good agreement (<2.6%) between MC calculated and measured data, except for the smaller fields (12x12 and 6x6 mm{sup 2}) that show a error of 4.7%. MC dose calculations are accurate and precise for clinical treatment planning up to a field size of 18x18 mm{sup 2}. Special care must be taken for smaller fields.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

True Zero Degree Incident Implants on VIISta3000

The deliberate use of channeling to control depth profiles has come of age in the application to CMOS imaging sensor device manufacturing. In order to enable the true zero implant application on VIISta3000, we have optimized beam incidence angle control, using beam optics models and experimental measurements. The experiment measurement and the beam optics analysis results agree, showing a variation of less than 0.03 deg. (1{sigma}) across the wafer and from wafer to wafer. Achieving this accuracy in a manufacturing environment requires careful calibration and tight control of the collimator magnet and the mechanical scan system. In this paper we discuss the root cause of beam incidence angle variation on VIISta3000 and explain the calibration and optimization used to insure the consistent minimized beam incidence angle. We show experimental data, including ThermaWave and SIMS profiles.

43 PARTICLE ACCELERATORS↗

Magnetic properties of Fe{sub 62}Co{sub 19}Ga{sub 19} films deposited on Si(100) substrates

Fe{sub 81-X}Co{sub X}Ga{sub 19} films, with x = 0-23 atom % Co, were deposited on Si(100) substrates, respectively, by the dc magnetron sputtering method. Film thickness (t{sub f}) ranged from 30 to 400 nm. We have done the following experiments on those films: saturation magnetostriction ({lambda}{sub S}), high-temperature magnetic hysteresis, x-ray diffraction (XRD), atomic force microscopy, Auger-depth profile analysis, and plane-view and/or cross-section transmission electron microscopy. Our main finding is that if x increases from 0 to 19 atom % Co, {lambda}{sub S} increases from 56 to 152 ppm, and if x continues to increase from 19 to 23 atom % Co, {lambda}{sub S} decreases. These results indicate that the addition of Co in the Fe{sub 81}Ga{sub 19} alloy is advantageous in enhancing {lambda}{sub S}, if x is the correct value. From XRD, the Fe{sub 62}Co{sub 19}Ga{sub 19}/Si(100) film comprises the A2 and B2 phases. The mechanism for large enhancement of {lambda}{sub S} in Fe{sub 62}Co{sub 19}Ga{sub 19}/Si(100) is related to an intrinsic origin. The t{sub f} dependence of {lambda}{sub S} for the Fe{sub 62}Co{sub 19}Ga{sub 19} films is that: [1] in the range of 110 {<=} t{sub f} {<=} 400 nm, {lambda}{sub S} increases as t{sub f} decreases; [2] in the range of 30 {<=} t{sub f} {<=} 110 nm, {lambda}{sub S} decreases as t{sub f} continues to decrease. The {lambda}{sub S} behavior in the regions [1] and [2] is explained based on the modified Neel model. Other physical properties of the Fe{sub 62}Co{sub 19}Ga{sub 19} films include the following: saturation magnetization 4{pi}M{sub S} = 1.8 - 2.0 T, coercivity H{sub C} = 35 - 64 Oe, Curie temperature T{sub C} = 597 deg. C, planar (mean) grain size D{sub P} = 29.6 nm, and columnar grain size D{sub L} {approx_equal} t{sub f}.

36 MATERIALS SCIENCE↗

CF{sub 4} plasma treatment on nanostructure band engineered Gd{sub 2}O{sub 3}-nanocrystal nonvolatile memory

The effects of CF{sub 4} plasma treatment on Gd{sub 2}O{sub 3} nanocrystal (NC) memory were investigated. For material analysis, secondary ion mass spectrometry and x-ray photoelectron spectroscopy analyses were performed to characterize the fluorine depth profile of the Gd{sub 2}O{sub 3}-NC film. In addition, an UV-visible spectrophotometer was used to obtain the Gd{sub 2}O{sub 3} bandgap and analyzed to suggest the modified structure of the energy band. Moreover, the electrical properties, including the memory window, program/erase speed, charge retention, and endurance characteristics were significantly improved depending on the CF{sub 4} plasma treatment conditions. This can be explained by the physical model based on the built-in electric field in the Gd{sub 2}O{sub 3} nanostructure. However, it was observed that too much CF{sub 4} plasma caused large surface roughness induced by the plasma damage, leading to characteristics degradation. It was concluded that with suitable CF{sub 4} plasma treatment, this Gd{sub 2}O{sub 3}-NC memory can be applied to future nonvolatile memory applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of CrRu-SiO{sub x} underlayer with MgO intermediate layer on the microstructure and magnetic properties of FePt-C thin film

The effect of the CrRu-SiO{sub x} underlayer with different doping concentrations and the thickness of the CrRu underlayer on the microstructure and magnetic properties of FePt-C films were investigated. FePt films exhibited L1{sub 0} (001) texture at various SiO{sub x} doping concentrations. The coercivities were as large as 28 kOe and the slope of M-H loop at coercivity was approximately equal to 1, suggesting that FePt grains were well exchange decoupled. Grain size was only slightly reduced after introducing the CrRu-SiO{sub x} underlayer. But the contact angle between the FePt grains and the MgO intermediate layer around 135 deg. indicated the a MgO intermediate layer was not favored for smaller grains to obtain good L1{sub 0} (001) texture. X-ray photoelectron spectroscopy in-depth profile showed that Si diffused into a whole FePt-C layer and C diffused to the film surface.

36 MATERIALS SCIENCE↗

Carbon diffusion in alumina from carbon and Ti{sub 2}AlC thin films

Carbon diffusion is observed in single crystal {alpha}-Al{sub 2}O{sub 3} substrates from carbon and Ti{sub 2}AlC thin films synthesized via pulsed cathodic arc deposition. Diffusion was found to occur at substrate temperatures of 570 deg. C and above. The diffusion coefficient of carbon in {alpha}-Al{sub 2}O{sub 3} is estimated to be of the order 3x10{sup -13} cm{sup 2}/s for deposition temperatures in the 570-770{sup o}C range by examining elastic recoil detection analysis (ERDA) elemental depth profiles. It is suggested that an appropriate diffusion barrier may be useful when depositing carbon containing thin films on {alpha}-Al{sub 2}O{sub 3} substrates at high temperatures.

36 MATERIALS SCIENCE↗

Analysis of Interstitial Elements in Niobium with Secondary Ion Mass Spectrometry (SIMS)

Superconducting Radio Frequency (SRF) cavities provide enhanced efficiency and reduced energy utilization in present day particle accelerators. Niobium (Nb) is the material of choice for these cavities due to its high critical temperature and critical magnetic field. In order to understand why certain treatments, especially a low temperature bake, improve performance, it is important to study Nb surface characteristics and identify elemental contamination that can affect the performance of the cavity. H, C, O, and N are of interest because they are interstitial impurities in Nb. In earlier work, SIMS analysis using a CAMECA IMS-6F with Cs+ primary beam showed that C and N were probably not significant factors impacting performance but there was a very high level of H in the Nb. Ion implants of C, N, O, and D into Nb provided quantification of C, N, O and indicated that D is very mobile in the Nb. Further analyses showed that heat treated Nb has lower levels of surface H than non heat treated Nb and subsequent removal of surface oxide by etching causes intake of H in a heat treated Nb sample. This result helps confirm the role of surface oxide as a hydrogen barrier. To further understand the oxide, Nb samples were anodized to obtain a thicker surface oxide and H and D were implanted into this oxide to check for the appearance of implant peaks. SIMS depth profile analyses were carried out and confirmed the presence of the implant shape for these elements in the oxide. Relative Sensitivity Factor (RSFs) could then be calculated for quantification of H in the oxide. Since the Nb matrix signal showed little change from the oxide to the substrate, the same RSF was used to estimate the H concentration in the Nb at 2×1022 atoms/cm3 (approximately 40% mole fraction H).

43 PARTICLE ACCELERATORS↗

Ingot Niobium RF Cavity Design and Development at BARC

This article presents the different activity of Ingot niobium in BARC. BARC is developing a technology for the accelerator driven subcritical system (ADSS) that will be mainly utilized for the transmutation of nuclear waste and enrichment of U{sup 233}. Design and development of superconducting medium velocity cavity has been taken up as a part of the ADSS project. The design and fabrication of f = 1050 MHz, {beta} = 0.49 with Ingot niobium will be presented. Positron annihilation studies are conducted on small samples of ingot niobium to understand the defect depth profile of the niobium surface. The results are presented here.

43 PARTICLE ACCELERATORS↗

Analysis of Interstitial Elements in Niobium with Secondary Ion Mass Spectrometry (SIMS)

Superconducting Radio Frequency (SRF) cavities provide enhanced efficiency and reduced energy utilization in present day particle accelerators. Niobium (Nb) is the material of choice for these cavities due to its high critical temperature and critical magnetic field. In order to understand why certain treatments, especially a low temperature bake, improve performance, it is important to study Nb surface characteristics and identify elemental contamination that can affect the performance of the cavity. H, C, O, and N are of interest because they are interstitial impurities in Nb. In earlier work, SIMS analysis using a CAMECA IMS-6F with Cs{sup +} primary beam showed that C and N were probably not significant factors impacting performance but there was a very high level of H in the Nb. Ion implants of C, N, O, and D into Nb provided quantification of C, N, O and indicated that D is very mobile in the Nb. Further analyses showed that heat treated Nb has lower levels of surface H than non heat treated Nb and subsequent removal of surface oxide by etching causes intake of H in a heat treated Nb sample. This result helps confirm the role of surface oxide as a hydrogen barrier. To further understand the oxide, Nb samples were anodized to obtain a thicker surface oxide and H and D were implanted into this oxide to check for the appearance of implant peaks. SIMS depth profile analyses were carried out and confirmed the presence of the implant shape for these elements in the oxide. Relative Sensitivity Factor (RSFs) could then be calculated for quantification of H in the oxide. Since the Nb matrix signal showed little change from the oxide to the substrate, the same RSF was used to estimate the H concentration in the Nb at 2x10{sup 22} atoms/cm{sup 3}(approximately 40% mole fraction H).

36 MATERIALS SCIENCE↗

The influence of impurities and planar defects on the infrared properties of silicon carbide films

Two cubic, single crystal silicon carbide (3C-SiC) films with similar thickness are shown to exhibit significantly different optical properties at mid-infrared wavelengths. Depth profiling by time-of-flight secondary ion mass spectroscopy indicates that these two films have substantially different n-type impurity concentrations that are responsible for the observed differences in optical absorption. The influence of impurities manifests as substantially different planar defect morphologies.

36 MATERIALS SCIENCE↗

Positron Annihilation Studies In Polymer Nano-Composites

Positron annihilation spectroscopy coupled with a variable mono-energy positron beam has been applied to study nanoscale polymeric nanocomposites. New information about multilayer depth profiles and structures, interfacial free-volume and open space properties have been obtained in polystyrene/carbon nano fiber composites. The S parameter in Doppler Broadening Energy Spectra combined slow positron beam is used to quantitatively represent the free volume, open spaces, and interactions in the interface between polystyrene matrix and carbon nanofibers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging laser analysis of building materials - practical examples

The Laser induced Breakdown Spectroscopy (LIBS) is supplement and extension of standard chemical methods and SEM- or Micro-RFA-applications for the evaluation of building materials. As a laboratory method LIBS is used to gain color coded images representing composition, distribution of characteristic ions and/or ingress characteristic of damaging substances. To create a depth profile of element concentration a core has to be taken and split along the core axis. LIBS was proven to be able to detect all important elements in concrete, e. g. Chlorine, Sodium or Sulfur, which are responsible for certain degradation mechanisms and also light elements like lithium or hydrogen. Practical examples are given and a mobile system for on-site measurements is presented.

36 MATERIALS SCIENCE↗

Effects of ozone exposure on 'Golden' papaya fruit by photoacoustic phase-resolved method: Physiological changes associated with carbon dioxide and ethylene emission rates during ripening

This work addresses the effects of ozone activity on the physiology of 'Golden' papaya fruit. Depth profile analysis of double-layer biological samples was accomplished using the phase-resolved photoacoustic spectroscopy. The feasibility of the method was demonstrated by singling out the spectra of the cuticle and the pigment layers of papaya fruit. The same approach was used to monitor changes occurring on the fruit during ripening when exposed to ozone. In addition, one has performed real time studies of fluorescence parameters and the emission rates of carbon dioxide and ethylene. Finally, the amount of pigments and the changes in waxy cuticle have been monitored. Results indicate that a fruit deliberately subjected to ozone at a level of 6 ppmv underwent ripening sooner (at least 24-48 h) than a fruit stored at ambient conditions. Moreover, ozone caused a reduction in the maximum quantum yield of photosynthetic apparatus located within the skin of papaya fruit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-resolution x-ray diffraction investigation of relaxation and dislocations in SiGe layers grown on (001), (011), and (111) Si substrates

This work presents a detailed characterization, using high-resolution x-ray diffraction, of multilayered Si{sub 1-x}Ge{sub x} heterostructures grown on (001), (011), and (111) Si substrates by reduced pressure chemical vapor deposition. Reciprocal space mapping has been used to determine both the strain and Ge concentration depth profiles within each layer of the heterostructures after initially determining the crystallographic tilt of all the layers. Both symmetric and asymmetric reciprocal space maps were measured on each sample, and the evaluation was performed simultaneously for the whole data set. The ratio of misfit to threading dislocation densities has been estimated for each individual layer based on an analysis of diffuse x-ray scattering from the defects.

36 MATERIALS SCIENCE↗

Characterization of Vacancy Defects in Carbon Ion Irradiated Graphite Using Positrons

Highly Oriented Pyrolytic Graphite samples are irradiated with 200 keV Carbon ions to fluences of 10{sup 14} and 10{sup 15} C{sup +} ions/cm{sup 2}. Depth resolved Doppler lineshape S-parameter exhibited large increase in peak damage regions of the sample, indicating the existence of irradiation induced vacancy defects. The depth profile of the defect region has been deduced from the analysis of the experimental data. It is found that divacancies are the dominant defects in the irradiated samples.

36 MATERIALS SCIENCE↗