Search NASA⌕ Search

SEARCH · Search NASA

Results for “experimental implementation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Investigation of near-threshold eta-meson production in the reaction {pi}{sup -}p{yields} {eta}n

Differential and total cross sections for eta-meson production in the reaction {pi}{sup -}p {yields} {eta}n were measured within the experimental program eta-meson physics implemented in the pion channel of the synchrocyclotron of the Petersburg Nuclear Physics Institute (PNPI, Gatchina). These measurements were performed at incident-pion momenta (700, 710, 720, and 730 MeV/c) in the vicinity of the threshold for the process under study by using the neutral-meson spectrometer designed and created at the Meson Physics Laboratory of PNPI. It is shown that, in the immediate vicinity of the threshold (685 MeV/c), the process of eta-meson production proceeds predominantly via S{sub 11}(1535)-resonance formation followed by the decay S{sub 11}(1535) {yields} {eta}n (the respective branching fraction is Br Almost-Equal-To 60%), but that, as the momentum of incident pions increases, the role of the D wave becomes ever more important. A detailed analysis of this effect indicates that it is due to the increasing contribution of the D{sub 13}(1520) resonance. Although the branching fraction of the decay of this resonance through the {eta}n channel is assumed to be very small (BR Almost-Equal-To 0.24%), the effect is enhanced owing to the interference between the D wave and the dominant resonance S{sub 11}(1535).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Charged-particle multiplicities in proton–proton collisions at $$\sqrt{s} = 0.9$$ s = 0.9 to 8 TeV

A detailed study of pseudorapidity densities and multiplicity distributions of primary charged particles produced in proton–proton collisions, at s= 0.9, 2.36, 2.76, 7 and 8 TeV, in the pseudorapidity range | η| < 2 , was carried out using the ALICE detector. Measurements were obtained for three event classes: inelastic, non-single diffractive and events with at least one charged particle in the pseudorapidity interval | η| < 1. The use of an improved track-counting algorithm combined with ALICE’s measurements of diffractive processes allows a higher precision compared to our previous publications. A KNO scaling study was performed in the pseudorapidity intervals | η| < 0.5, 1.0 and 1.5. The data are compared to other experimental results and to models as implemented in Monte Carlo event generators PHOJET and recent tunes of PYTHIA6, PYTHIA8 and EPOS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Deadlock prediction via generalized dependency

Deadlocks are notorious bugs in multithreaded programs, causing serious reliability issues. However, they are difficult to be fully expunged before deployment, as their appearances typically depend on specific inputs and thread schedules, which require the assistance of dynamic tools. However, existing deadlock detection tools mainly focus on locks, but cannot detect deadlocks related to condition variables. This paper presents a novel approach to fill this gap. It extends the classic lock dependency to generalized dependency by abstracting the signal for the condition variable as a special resource so that communication deadlocks can be modeled as hold-and-wait cycles as well. It further designs multiple practical mechanisms to record and analyze generalized dependencies. In the end, this paper presents the implementation of the tool, called UnHang. Experimental results on real applications show that UnHang is able to find all known deadlocks and uncover two new deadlocks. Overall, UnHang only imposes around 3% performance overhead and 8% memory overhead, making it a practical tool for the deployment environment.

Zhou, Jinpeng↗

Autonomous Controls For Reactor Technologies (acorn)

ACORN (Autonomous Controls fOr Reactor techNologies) software utilizes data, obtained from an experimental test bed and/or simulation, to implement a control command for microreactor operation. Command examples include a change to the temperature profile, power profiles, heat fluxes, etc. The control command recommended by the code is derived based on future predicted states of a microreactor, allowing proactive optimal and autonomous microreactor operation. The software is written in Python languages. The current software supports autonomous temperature controls of heat pipe simulator and autonomous heat flux controls of a 37 heat pipe non-nuclear testbed simulator (or its surrogate models).

Lin, Linyu [Idaho National Laboratory (INL), Idaho↗

Automatic identification and classification of Palomar Transient Factory astrophysical objects in GLADE

Palomar Transient Factory (PTF) is a comprehensive detection system for the identification and classification of transient astrophysical objects. In this paper, we make two significant contributions to the PTF pipeline. First, we present an experimental study that evaluates a novel implementation of the real-time classifier in GLADE - a parallel data processing system that combines the efficiency of a database with the extensibility of map-reduce. We show how each stage in the classifier maps optimally into GLADE tasks by taking advantage of the unique features of the system - range-based data partitioning, columnar storage, multi-query execution, and in-database support for complex aggregate computation. Second, we introduce a novel parallel similarity join algorithm for advanced transient classification. In conclusion, we implement this algorithm in GLADE and execute it on a massive supercomputer with more than 3,000 threads, achieving more than three orders of magnitude improvement over the PostgreSQL solution.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of Sequential Design of Experiments (SDoE) to Large Pilot-Scale Solvent-Based CO2 Capture Process at Technology Centre Mongstad (TCM)

The United States Department of Energy’s Carbon Capture Simulation for Industry Impact (CCSI2) program has developed a framework for sequential design of experiments (SDoE) that aims to maximize knowledge gained from budget- and schedule-limited pilot scale testing. SDoE was applied to the planning and execution of campaigns for testing CO2 capture systems at pilot-scale in order to optimally allocate resources available for the testing. In this methodology, a stochastic process model is developed by quantifying the parametric uncertainty in submodels of interest; for a solvent-based CO2 capture system, these may include physical properties and equipment performance submodels (e.g., mass transfer, interfacial area). This uncertainty is propagated through the full process model, over variable operating conditions, for estimating the resulting uncertainty in key model outputs (e.g., percentage of CO2 capture, solvent regeneration energy requirement). In developing a data collection plan, the predicted output uncertainty is incorporated into an algorithm that seeks simultaneously to select process operating conditions for which the predicted uncertainty is relatively high and to ensure that the entire space of operation is well represented. This test plan is then used to guide operation of the pilot plant at varying steady-state conditions, with resulting process data incorporated into the existing model using Bayesian inference to refine parameter distributions. The updated stochastic model, with reduced parametric uncertainty from data collected, is then used to guide additional data collection, thus the sequential nature of the experimental design. The SDoE process was implemented at the pilot test unit (12 MWe in scale) at Norway’s Technology Centre Mongstad (TCM) in a summer 2018 test campaign with aqueous monoethanolamine (MEA). During the test campaign, the varied operating conditions included the flowrates of circulated solvent, flue gas, and reboiler steam and the CO2 concentration in the flue gas. The process data were used to update probability distributions of mass transfer and interfacial area parameters of a stochastic process model developed by the CCSI2 team. Two iterations of the SDoE process were executed, resulting in the uncertainty in model predicted CO2 capture percentage decreasing by an average of 58.0 ± 4.7% over the full input space of interest. This work demonstrates the potential of the SDoE process for model refinement through reduction in process model parametric uncertainty, and ultimately risk in scale-up, in CO2 capture technology performance.

carbon capture↗

Computational Efficient Upscaling Methodology for Predicting Thermal Conductivity of Nuclear Waste forms

This study evaluated different upscaling methods to predict thermal conductivity in loaded nuclear waste form, a heterogeneous material system. The efficiency and accuracy of these methods were compared. Thermal conductivity in loaded nuclear waste form is an important property specific to scientific researchers, in waste form Integrated performance and safety code (IPSC). The effective thermal conductivity obtained from microstructure information and local thermal conductivity of different components is critical in predicting the life and performance of waste form during storage. How the heat generated during storage is directly related to thermal conductivity, which in turn determining the mechanical deformation behavior, corrosion resistance and aging performance. Several methods, including the Taylor model, Sachs model, self-consistent model, and statistical upscaling models were developed and implemented. Due to the absence of experimental data, prediction results from finite element method (FEM) were used as reference to determine the accuracy of different upscaling models. Micrographs from different loading of nuclear waste were used in the prediction of thermal conductivity. Prediction results demonstrated that in term of efficiency, boundary models (Taylor and Sachs model) are better than self consistent model, statistical upscaling method and FEM. Balancing the computation resource and accuracy, statistical upscaling is a computational efficient method in predicting effective thermal conductivity for nuclear waste form.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

EMPIRE: A code for nuclear astrophysics

The nuclear reaction code EMPIRE is presented as a useful tool for nuclear astrophysics. EMPIRE combines a variety of the reaction models with a comprehensive library of input parameters providing a diversity of options for the user. With exclusion of the directsemidirect capture all reaction mechanisms relevant to the nuclear astrophysics energy range of interest are implemented in the code. Comparison to experimental data show consistent agreement for all relevant channels.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Energy Frontier Research Center Center for Materials Science of Nuclear Fuels

Scientific Successes • The first phonon density of states (PDOS) measurements for UO2 to include anharmonicity were obtained using time-of-flight inelastic neutron scattering at the Spallation Neutron Source (SNS), and an innovative, experimental-based anharmonic smoothing technique has enabled quantitative benchmarking of ab initio PDOS simulations. • Direct comparison between anharmonicity-smoothed ab initio PDOS simulations for UO2 and experimental measurements has demonstrated the need for improved understanding of UO2 at the level of phonon dispersion, and, further, that advanced lattice dynamics simulations including finite temperatures approaches will be required for handling this strongly correlated nuclear fuel. • PDOS measurements performed on polycrystalline samples have identified the phonon branches and energy ranges most highly impacted by fission-product and hyper-stoichiometry lattice defects in UO2. These measurements have revealed the broad-spectrum impact of oxygen hyper-stoichiometry on thermal transport. The reduction in thermal conductivity caused by hyper-stoichiometry is many times stronger than that caused by substitutional fission-product impurities. • Laser-based thermo-reflectance measurements on UO2 samples irradiated with light (i.e. He) ions to introduce point defects have been coupled with MD simulations and lattice parameter measurements to determine the role of uranium and oxygen point defects in reducing thermal conductivity. • A rigorous perturbation theory treatment of phonon lifetimes in UO2 based on a 3D discretization of the Brillouin zone coupled with experimentally measured phonon dispersion has been implemented that produces improved predictions of the temperature dependent thermal conductivity. • Atom probe investigations of the influence of grain boundary structure on the segregation behavior of Kr in UO2 have shown that smaller amounts of Kr are present at low angle grain boundaries than at large angle grain boundaries due to the more dense dislocation arrays associated with large angle boundaries; this observation has potentially important ramifications for thermal transport in the high burn-up rim region of light water reactor fuel. • A variable charge interatomic potential has been developed that not only provides an accurate representation of the fluorite UO2 phase, it is further capable of describing continuous stoichiometry changes from UO2 to hyper-stoichiometric UO2+x, to U4O9 and U3O7, and possibly to orthorhombic U3O8. This is the first potential that features many-body effects in all possible interactions (U-U, U-O and O-O) combined with the variable charge. • A theoretical proof has been formulated showing that it is necessary to use the so-called model C phase field approach, consisting of Cahn-Hilliard and Allen-Cahn equations, to describe void evolution in irradiated materials. This work resolved a longstanding literature controversy regarding how to model voids at the mesoscale. • A novel cluster dynamics model has been developed for the nucleation of voids and loops in UO2 under irradiation. This model is important in understanding the defect state of UO2 after irradiation and, more importantly, reveals off-stoichiometric states of irradiated UO2 that are critical for understanding the impact of irradiation on thermal transport. Personnel Successes

36 MATERIALS SCIENCE↗

Probing Warm Dense Silica with Betatron Radiation - Oral Presentation [Slides]

Laser wakefield acceleration (LWFA) has been shown to produce short X-ray pulses from oscillations of electrons within the plasma wake. These betatron X-rays pulses have a broad, synchrotron-like energy spectrum and a duration on the order of the driving laser pulse, thereby enabling probing of ultrafast interactions. Using the 1 J, 40fs short-pulse laser at the Matter in Extreme Conditions experimental station at LCLS, we have implemented LWFA to generate and subsequently characterized betatron X-rays. A scintillator and lanex screen were used to measure the charge fluence and energy spectrum of the produced electron beam.

43 PARTICLE ACCELERATORS↗

Density Functional Theory Applied to Transition Metal Elements and binaries: Development Application and Results of the V-DM/16 Test Set

Density functional theory (DFT) is undergoing a shift from a descriptive to a predictive tool in the field of solid state physics, heralded by a spike in “high-throughput” studies. However, methods to rigorously evaluate the validity and accuracy of these studies is lacking, raising serious questions when simulation and experiment disagree. In response, we have developed the V-DM/16 test set, designed to evaluate the experimental accuracy of DFT’s various implementations for pe riodic transition metal solids. Our test set evaluates 26 transition metal elements and 80 transition metal alloys across three physical observables: lattice constants, elastic coefficients, and formation energy of alloys. Whether or not a functional can accurately evaluate the formation energy offers key insights into whether the relevant physics are being captured in a simulation, an especially impor tant question in transition metals where active d-electrons can thwart the accuracy of an otherwise well-performing functional. Our test set captures a wide variety of cases where the unique physics present in transition metal binaries can undermine the effectiveness of “traditional” functionals. By application of the V/DM-16 test set, we aim to better characterize the performance of existing functionals on transition metals, and to offer a new tool to rigorously evaluate the performance of new functionals in the future.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Viscoelastic Modeling of Polymers in ALEGRA with the GAP Model

The Glassy Amorphous Polymer (GAP) model is a viscoelastic/plastic model developed at Los Alamos National Laboratory to accurately model a variety of polymers across a wide range of conditions and loading rates, including shock loading. In the present report we introduce and assess this model, newly implemented in the ALEGRA shock and multiphysics code, using a series of verification and application-related validation problems. We describe the mathematical and theoretical formulation of the model, as well as its implementation in ALEGRA, in detail. We provide verification results that assess the model implementation against published computational results, as well as validation results which we compare to existing experimental results when possible. These comparisons instill confidence in the implementation and indicate that the addition of the GAP model to the ALEGRA code provides users with a high-fidelity polymer modeling capability that is capable of recreating complex polymer phenomena.

36 MATERIALS SCIENCE↗

Non-invasive Pipe Pressure Monitoring for Safeguards

Our project explores a new solution to complement current safeguards toolbox by independently, and noninvasively, determining the pressure inside uranium hexafluoride (UF 6 )-carrying Gas Centrifuge Enrichment Plant (GCEP) pipes. Proof-of-principle, non-invasive pipe pressure monitoring tests were conducted through measurements of hoop and axial strain using an optical-interference dilatometry technique based on fiber Bragg gratings (FBGs) inscribed in the core of telecommunication-type 125 µm diameter optical fibers. The fibers were affixed to commercial stainless steel and aluminum tubes and pipes of the type expected to be found at GCEP’s, each measuring four inches in diameter. When the internal air pressure in the pipes changes their external diameter and length follow, and the pitch in the FBG shrinks and/or expands accordingly. In turn, these changes result in a shift of the light wavelength reflected by the FBGs. Several FBGs physically attached to the pipe, as well as control FBGs not attached, were interrogated during the process using state-of-the-art commercial interrogators that operate on swept-wavelength laser technology. Strains measured were contrasted against calculations based on the known elastic and mechanical properties of the pipes. Good agreement is found, and strategies are proposed for further improvement of the experimental resolution as well as future implementation of this novel approach for GCEP safeguards.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Linux OS Jitter Measurements at Large Node Counts using a BlueGene/L

We present experimental results for a coordinated scheduling implementation of the Linux operating system. Results were collected on an IBM Blue Gene/L machine at scales up to 16K nodes. Our results indicate coordinated scheduling was able to provide a dramatic improvement in scaling performance for two applications characterized as bulk synchronous parallel programs.

59 BASIC BIOLOGICAL SCIENCES↗

Warming Permafrost Model Intercomparision Project (WrPMIP): Pan-Arctic Perturbation Warming Simulations

Title: Warming Permafrost Model Intercomparision Project (WrPMIP): Pan-Arctic Perturbation Warming Simulations Description: WrPMIP Pan-Arctic simulations including historial baseline and two warming simulations. Models were perturbed similarly to known experimental warming trials that have been implemented across the Pan-Arctic over the last several decades. More information about the dataset can be found at the following links: https://warmingpermafrost.nau.edu/ The dataset is available at: https://esgf-node.ornl.gov/search/project=WrPMIP&mip_era=CMIP6&activity_id=WrPMIP

54 ENVIRONMENTAL SCIENCES↗

Allometric Scaling and Cell Ratios in Multi-Organ in vitro Models of Human Metabolism

Intelligent in vitro models able to recapitulate the physiological interactions between tissues in the body have enormous potential as they enable detailed studies on specific two-way or higher order tissue communication. These models are the first step toward building an integrated picture of systemic metabolism and signaling in physiological or pathological conditions. However, the rational design of in vitro models of cell–cell or cell–tissue interaction is difficult as quite often cell culture experiments are driven by the device used, rather than by design considerations. Indeed, very little research has been carried out on in vitro models of metabolism connecting different cell or tissue types in a physiologically and metabolically relevant manner. Here, we analyze the physiological relationship between cells, cell metabolism, and exchange in the human body using allometric rules, downscaling them to an organ-on-a-plate device. In particular, in order to establish appropriate cell ratios in the system in a rational manner, two different allometric scaling models (cell number scaling model and metabolic and surface scaling model) are proposed and applied to a two compartment model of hepatic-vascular metabolic cross-talk. The theoretical scaling studies illustrate that the design and hence relevance of multi-organ models is principally determined by experimental constraints. Two experimentally feasible model configurations are then implemented in a multi-compartment organ-on-a-plate device. An analysis of the metabolic response of the two configurations demonstrates that their glucose and lipid balance is quite different, with only one of the two models recapitulating physiological-like homeostasis. In conclusion, not only do cross-talk and physical stimuli play an important role in in vitro models, but the numeric relationship between cells is also crucial to recreate in vitro interactions, which can be extrapolated to the in vivo reality.

60 APPLIED LIFE SCIENCES↗

SHM of wind turbine blades using piezoelectric active-sensors

This paper presents a variety of structural health monitoring (SHM) techniques, based on the use of piezoelectric active-sensors, used to determine the structural integrity of wind turbine blades. Specifically, Lamb wave propagations, frequency response functions, and time series based methods are utilized to estimate the condition of wind turbine blades. For experiments, a 1m section of a 9m CX100 blade is used. Overall, these three methods yielded a sufficient damage detection capability to warrant further investigation into field deployment. A full-scale fatigue test of a CX-100 wind turbine blade is also conducted. This paper summarizes considerations needed to design such SHM systems, experimental procedures and results, and practical implementation issues that can be used as guidelines for future investigations.

17 WIND ENERGY↗

Underground coal mine monitoring with wireless sensor networks - article no. 10

Environment monitoring in coal mines is an important application of wireless sensor networks (WSNs) that has commercial potential. We discuss the design of a Structure-Aware Self-Adaptive WSN system, SASA. By regulating the mesh sensor network deployment and formulating a collaborative mechanism based on a regular beacon strategy, SASA is able to rapidly detect structure variations caused by underground collapses. We further develop a sound and robust mechanism for efficiently handling queries under instable circumstances. A prototype is deployed in a real coal mine. We present our implementation experiences as well as the experimental results. To better evaluate the scalability and reliability of SASA, we also conduct a large-scale trace-driven simulation based on real data collected from the experiments.

01 COAL, LIGNITE, AND PEAT↗