Search NASA⌕ Search

SEARCH · Search NASA

Results for “functional modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

A telescopic jib for continuous adjustment

For special space applications, e.g. for experiments distant from any orbital platforms or manipulators a new kind of jibs with extreme extension capacity has to be designed. Considering the requirements, the telescopic principle is found to be the most promising. For the choice of the stiff structure, design criteria are evaluated. Special effort deals with the drive system. An electromechanical system can satisfy the requirements. First results of the development of such a drive are presented. The most significant features are: A telescopic assembly of tubes which can be mutually moved by a short spindle in the center of the package. An elastically suspended screw is located at the bottom of each tube. For the jib extension, these screws will be linked with the spindle. The control of their sequence and the adjustment of tubes in mutual end positions are performed by latches. A functional model proved the basic idea.

Etzler, C. C.↗

Preliminary results of the mission profile life test of a 30 cm Hg bombardment thruster

The paper deals with some preliminary results of the Mission Profile Life Test planned to conduct a program of long-term test segments of 30-cm diameter thrusters and power processing units under computer control. Thruster performance data and other operational characteristics taken at various times during a test segment are compared and the results are evaluated in light of the life-timing mechanisms. Thruster control algorithms are also presented. The first test segment completed 2700 hr of a planned 4000 hr test with a J-series 30-cm thruster. The last 1600 hr used a functional model power processing unit (PPU) operated in vacuum. The thruster-PPU was controlled by a computer with software developed to control start-ups, throttling, and variety of off-normal conditions.

Bechtel, R. T.↗

Reduced power processor requirements for the 30-cm diameter HG ion thruster

The characteristics of power processors strongly impact the overall performance and cost of electric propulsion systems. A program was initiated to evaluate simplifications of the thruster-power processor interface requirements. The power processor requirements are mission dependent with major differences arising for those missions which require a nearly constant thruster operating point (typical of geocentric and some inbound planetary missions) and those requiring operation over a large range of input power (such as outbound planetary missions). This paper describes the results of tests which have indicated that as many as seven of the twelve power supplies may be eliminated from the present Functional Model Power Processor used with 30-cm diameter Hg ion thrusters.

Rawlin, V. K.↗

Extended operating range of the 30-cm ion thruster with simplified power processor requirements

A two grid 30 cm diameter mercury ion thruster was operated with only six power supplies over the baseline J series thruster power throttle range with negligible impact on thruster performance. An analysis of the functional model power processor showed that the component mass and parts count could be reduced considerably and the electrical efficiency increased slightly by only replacing power supplies with relays. The input power, output thrust, and specific impulse of the thruster were then extended, still using six supplies, from 2660 watts, 0.13 newtons, and 2980 seconds to 9130 watts, 0.37 newtons, and 3820 seconds, respectively. Increases in thrust and power density enable reductions in the number of thrusters and power processors required for most missions. Preliminary assessments of the impact of thruster operation at increased thrust and power density on the discharge characteristics, performance, and lifetime of the thruster were also made.

Rawlin, V. K.↗

An antenna fine pointing mechanism

SOFA, a device designed for the highly accurate 2 axis pointing of antenna or any feature installed on a spacecraft is described. The major characteristic of this system is complete freedom from friction and wear out, resulting in numerous advantages, such as outstanding precision, virtually endless service life, high simplicity, and reliability. The sizing method is described and performances are analyzed. The results from analogue simulations are presented. A functional model of the electrical and mechanical parts was built and subjected to on ground tests using a 2 axis platform simulating the spacecraft's motions. The results obtained are thoroughly in keeping with the predictions and simulations. Various possible applications of the SOFA system are mentioned.

Hubert, B.↗

Advanced dc motor controller for battery-powered electric vehicles

A motor generation set is connected to run from the dc source and generate a voltage in the traction motor armature circuit that normally opposes the source voltage. The functional feasibility of the concept is demonstrated with tests on a Proof of Principle System. An analog computer simulation is developed, validated with the results of the tests, applied to predict the performance of a full scale Functional Model dc Controller. The results indicate high efficiencies over wide operating ranges and exceptional recovery of regenerated energy. The new machine integrates both motor and generator on a single two bearing shaft. The control strategy produces a controlled bidirectional plus or minus 48 volts dc output from the generator permitting full control of a 96 volt dc traction motor from a 48 volt battery, was designed to control a 20 hp traction motor. The controller weighs 63.5 kg (140 lb.) and has a peak efficiency of 90% in random driving modes and 96% during the SAE J 227a/D driving cycle.

Belsterling, C. A.↗

Extended operating range of the 30-cm ion thruster with simplified power processor requirements

A 30-cm-diameter Hg ion thruster similar in design to the J-series thruster was operated at fixed conditions with only five power supplies and was throttled over the baseline power range with six supplies. An analysis of the functional model power processor showed that the component mass and parts count would be reduced by about 14 and 35% respectively, and the electrical efficiency would be increased about 1.5% by replacing power supplies with relays. By introducing new circuit designs, additional reductions in the component mass and parts, as well as an increase in electrical efficiency would be expected. The impact on thruster performance of reducing the number of power supplies was to lower the propellant utilization efficiency about 1.0% and raise the electrical efficiency values from 0.2 to 1.3% over the throttle range.

Rawlin, V. K.↗

Practical application of power conditioning to electric propulsion for passenger vehicles

A functional model 15 HP, 120 volt, 4-pole, 7600 r.p.m. samarium-cobalt permanent magnet type brushless dc motor-transistorized power conditioner unit was designed, fabricated and tested for specific use in propulsion of electric passenger vehicles. This new brushless motor system, including its power conditioner package, has a number of important advantages over existing systems such as reduced weight and volume, higher reliability, and potential for improvements in efficiencies. These advantages are discussed in this paper in light of the substantial test data collected during experimentation with the newly developed conditioner motor propulsion system. Details of the power conditioner design philosophy and particulars are given in the paper. Also, described here are the low level electronic design and operation in relation to the remainder of the system.

Demerdash, N. A.↗

Monte Carlo studies of ocean wind vector measurements by SCATT: Objective criteria and maximum likelihood estimates for removal of aliases, and effects of cell size on accuracy of vector winds

The scatterometer on the National Oceanic Satellite System (NOSS) is studied by means of Monte Carlo techniques so as to determine the effect of two additional antennas for alias (or ambiguity) removal by means of an objective criteria technique and a normalized maximum likelihood estimator. Cells nominally 10 km by 10 km, 10 km by 50 km, and 50 km by 50 km are simulated for winds of 4, 8, 12 and 24 m/s and incidence angles of 29, 39, 47, and 53.5 deg for 15 deg changes in direction. The normalized maximum likelihood estimate (MLE) is correct a large part of the time, but the objective criterion technique is recommended as a reserve, and more quickly computed, procedure. Both methods for alias removal depend on the differences in the present model function at upwind and downwind. For 10 km by 10 km cells, it is found that the MLE method introduces a correlation between wind speed errors and aspect angle (wind direction) errors that can be as high as 0.8 or 0.9 and that the wind direction errors are unacceptably large, compared to those obtained for the SASS for similar assumptions.

Pierson, W. J.↗

The Effect of Sea-Surface Sun Glitter on Microwave Radiometer Measurements

A relatively simple model for the microwave brightness temperature of sea surface Sun glitter is presented. The model is an accurate closeform approximation for the fourfold Sun glitter integral. The model computations indicate that Sun glitter contamination of on orbit radiometer measurements is appreciable over a large swath area. For winds near 20 m/s, Sun glitter affects the retrieval of environmental parameters for Sun angles as large as 20 to 25 deg. The model predicted biases in retrieved wind speed and sea surface temperature due to neglecting Sun glitter are consistent with those experimentally observed in SEASAT SMMR retrievals. A least squares retrieval algorithm that uses a combined sea and Sun model function shows the potential of retrieving accurate environmental parameters in the presence of Sun glitter so long as the Sun angles and wind speed are above 5 deg and 2 m/s, respectively.

Wentz, F. J.↗

Automated Orbit Determination System (AODS) requirements definition and analysis

The requirements definition for the prototype version of the automated orbit determination system (AODS) is presented including the AODS requirements at all levels, the functional model as determined through the structured analysis performed during requirements definition, and the results of the requirements analysis. Also specified are the implementation strategy for AODS and the AODS-required external support software system (ADEPT), input and output message formats, and procedures for modifying the requirements.

Waligora, S. R.↗

A program for assessing pilot mental state in flight simulators

A program to apply proposed measures of pilot mental state in the simulator flight deck environment has been undertaken at NASA Langley Research Center. Literature survey identified a promising subset of methods for assessing workload, attention and vigilance, and task-related stress, and revealed a need for improved analytical techniques in the physiological area. An effort to apply functional modelling techniques has been initiated. A psychophysiological laboratory has been designed for simulator application. The program is designed to develop improved techniques for evaluating simulator cue fidelity and for imposing realistic workload and attentional demands on the simulator pilot.

Pope, A. T.↗

The optimization of convergence for Chebyshev polynomial methods in an unbounded domain

Grosch and Orszag (1977) have performed a numerical analysis of the problem of solving differential equations in a semiinfinite or infinite domain using Chebyshev polynomials. The principal limitation of the conducted study was that it was entirely empirical. Various differential equations were solved in different ways and the numbers were compared. The present investigation has the objective to extend the studies conducted by Grosch and Orszag by deriving asymptotic approximations to the Chebyshev coefficients of simple model functions. This approach makes it possible to conduct more systematic comparisons of different methods, extend the range of comparisons, and, perhaps most important, give simple analytic formulas for choosing the optimum domain size or mapping parameter L for various situations.

Boyd, J. P.↗

Microwave scatterometer measurements of oceanic wind vector

Results from Seasat-A scatterometer (SASS) remote sensing of oceanic wind vectors are reviewed, together with the theory of radar backscattering. The SASS was designed to measure the surface wind stress and neutral stability wind vector at 19.5 m altitude. Requirements included windspeeds from 4-24 m/sec to within 2 m/sec or 10%, a 1000 km swath, directions from 0-360 deg to within 20 deg, a 50 km resolution cell, and cross-track and along-track spacing between resolution cells of 100 km. The method was based on Bragg scattering of microwaves from cm-length capillary ocean waves. The strength of the backscatter is proportional to the capillary wave amplitude, which is in equilibrium with the ocean surface wind speed. The measurement grouping, least-squares estimator, and dB deviation model function table for the SASS geophysical algorithm are discussed. Comparisons of SASS, GOASEX, and ground truth wind data are made, and a 0.92 correlation between SASS and ground truth data is determined from regression analysis.

Jones, W. L.↗

A lightweight electronically commutated dc motor for electric passenger vehicles

A functional model breadboard converter and a rare-earth-cobalt, permanent magnet motor; as well as an engineering model converter and PM motor suitable for vehicle installations were developed and tested. The converter and motor achieved an 88% peak efficiency, a maximum output of 26 kW at 26,000 rpm, and a continuous rating of 15 kW. The system also generated power to the source during braking, with a demonstrated peak power available at the converter terminals of approximately 26 kW at 88% efficiency. Major conclusions include: (1) the SAE J227a(D) driving cycle efficiency for the converter/motor is 86% to 88% when energy available for recovery at the converter terminals is included; (2) the converter initial cost is approximately five times that of the permanent magnet motor, but can be reduced by means of LSI logic and integrated liquid cooled semiconductor packages; and (3) an electronically commutated motor with a liquid cooled converter will operate reliably without service or maintenance for the life of a passenger vehicle.

Echolds, E. F.↗

Computational modeling of multispectral remote sensing systems: Background investigations

A computational model of the deterministic and stochastic process of remote sensing has been developed based upon the results of the investigations presented. The model is used in studying concepts for improving worldwide environment and resource monitoring. A review of various atmospheric radiative transfer models is presented as well as details of the selected model. Functional forms for spectral diffuse reflectance with variability introduced are also presented. A cloud detection algorithm and the stochastic nature of remote sensing data with its implications are considered.

Aherron, R. M.↗

IDIMS/GEOPAK: Users manual for a geophysical data display and analysis system

The application of an existing image analysis system to the display and analysis of geophysical data is described, the potential for expanding the capabilities of such a system toward more advanced computer analytic and modeling functions is investigated. The major features of the IDIMS (Interactive Display and Image Manipulation System) and its applicability for image type analysis of geophysical data are described. Development of a basic geophysical data processing system to permit the image representation, coloring, interdisplay and comparison of geophysical data sets using existing IDIMS functions and to provide for the production of hard copies of processed images was described. An instruction manual and documentation for the GEOPAK subsystem was produced. A training course for personnel in the use of the IDIMS/GEOPAK was conducted. The effectiveness of the current IDIMS/GEOPAK system for geophysical data analysis was evaluated.

Libert, J. M.↗

Advanced axial field D.C. motor development for electric passenger vehicle

A wound-field axial-flux dc motor was developed for an electric vehicle drive system. The motor is essentially an axial-flux version of the classical Gramme-ring winding motor, but the active conductors are recessed into slots cut into the two opposite faces of the laminated tape-wound core ring. Three motors were built and tested in the program. The second (functional) model was a six-pole machine which weighed 88.5 kg. It developed 16.9 km (33.0 hp), and a max speed of 4800 rpm. Full load efficiency was 92% and predicted SAE D-cycle efficiency was 88%. The last engineering) model was a 4-pole machine with compoles, allowing a weight reduction to 45 kg (100 lbs.) while addressing some manufacturability problems. The engineering model was rated at 13.2 kw (17.6 hp) at 3000 rpm, with a peak power of 19.8 km (26.4 hp) and a max speed of 7200 rpm. Initial test results on this motor showed poor commutation and efficiency; the program was terminated without resolution of these problems.

Jones, W. J.↗