Search NASA⌕ Search

SEARCH · Search NASA

Results for “generalized algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

A robust geometry estimation method for spiral, sequential and circular cone-beam micro-CT

Purpose: The authors propose a novel method for misalignment estimation of micro-CT scanners using an adaptive genetic algorithm. Methods: The proposed algorithm is able to estimate the rotational geometry, the direction vector of table movement and the displacement between different imaging threads of a dual source or even multisource scanner. The calibration procedure does not rely on dedicated calibration phantoms and a sequence scan of a single metal bead is sufficient to geometrically calibrate the whole imaging system for spiral, sequential, and circular scan protocols. Dual source spiral and sequential scan protocols in micro-computed tomography result in projection data that-besides the source and detector positions and orientations-also require a precise knowledge of the table direction vector to be reconstructed properly. If those geometric parameters are not known accurately severe artifacts and a loss in spatial resolution appear in the reconstructed images as long as no geometry calibration is performed. The table direction vector is further required to ensure that consecutive volumes of a sequence scan can be stitched together and to allow the reconstruction of spiral data at all. Results: The algorithm's performance is evaluated using simulations of a micro-CT system with known geometry and misalignment. To assess the quality of the algorithm in a real world scenario the calibration of a micro-CT scanner is performed and several reconstructions with and without geometry estimation are presented. Conclusions: The results indicate that the algorithm successfully estimates all geometry parameters, misalignment artifacts in the reconstructed volumes vanish, and the spatial resolution is increased as can be shown by the evaluation of modulation transfer function measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A non-hybrid method for the PDF equations of turbulent flows on unstructured grids

In probability density function (PDF) methods of turbulent flows, the joint PDF of several flow variables is computed by numerically integrating a system of stochastic differential equations for Lagrangian particles. A set of parallel algorithms is proposed to provide an efficient solution of the PDF transport equation modeling the joint PDF of turbulent velocity, frequency and concentration of a passive scalar in geometrically complex configurations. In the vicinity of walls the flow is resolved by an elliptic relaxation technique down to the viscous sublayer, explicitly modeling the high anisotropy and inhomogeneity of the low-Reynolds-number wall region without damping or wall-functions. An unstructured Eulerian grid is employed to extract Eulerian statistics, to solve for quantities represented at fixed locations of the domain (i.e., the mean pressure and the elliptic relaxation tensor) and to track particles. All three aspects regarding the grid make use of the finite element method employing the simplest linear shapefunctions. To model the small-scale mixing of the transported scalar, the interaction by exchange with the conditional mean (IECM) model is adopted. An adaptive algorithm to compute the velocity-conditioned scalar mean is proposed that homogenizes the statistical error over the sample space with no assumption on the shape of the underlying velocity PDF. Compared to other hybrid particle-in-cell approaches for the PDF equations, the current methodology is consistent without the need for consistency conditions. The algorithm is tested by computing the dispersion of passive scalars released from concentrated sources in two different turbulent flows: the fully developed turbulent channel flow and a street canyon (or cavity) flow. Algorithmic details on estimating conditional and unconditional statistics, particle tracking and particle-number control are presented in detail. Relevant aspects of performance and parallelism on cache-based shared memory machines are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A complex guided spectral transform Lanczos method for studying quantum resonance states

A complex guided spectral transform Lanczos (cGSTL) algorithm is proposed to compute both bound and resonance states including energies, widths, and wavefunctions. The algorithm comprises of two layers of complex-symmetric Lanczos iterations. A short inner layer iteration produces a set of complex formally orthogonal Lanczos polynomials. They are used to span the guided spectral transform function determined by a retarded Green operator. An outer layer iteration is then carried out with the transform function to compute the eigen-pairs of the system. The guided spectral transform function is designed to have the same wavefunctions as the eigenstates of the original Hamiltonian in the spectral range of interest. Therefore, the energies and/or widths of bound or resonance states can be easily computed with their wavefunctions or by using a root-searching method from the guided spectral transform surface. The new cGSTL algorithm is applied to bound and resonance states of HO{sub 2}, and compared to previous calculations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of contour images using optics of spiral beams

An approach is outlined to the recognition of contour images using computer technology based on coherent optics principles. A mathematical description of the recognition process algorithm and the results of numerical modelling are presented. The developed approach to the recognition of contour images using optics of spiral beams is described and justified. (image recognition)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A STELLAR MODEL-FITTING PIPELINE FOR ASTEROSEISMIC DATA FROM THE KEPLER MISSION

Over the past two decades, helioseismology has revolutionized our understanding of the interior structure and dynamics of the Sun. Asteroseismology will soon place this knowledge into a broader context by providing structural data for hundreds of Sun-like stars. Solar-like oscillations have already been detected from the ground in several stars, and NASA's Kepler mission is poised to unleash a flood of stellar pulsation data. Deriving reliable asteroseismic information from these observations demands a significant improvement in our analysis methods. In this paper, we report the initial results of our efforts to develop an objective stellar model-fitting pipeline for asteroseismic data. The cornerstone of our automated approach is an optimization method using a parallel genetic algorithm. We describe the details of the pipeline and we present the initial application to Sun-as-a-star data, yielding an optimal model that accurately reproduces the known solar properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Imaging of complex density in silver nanocubes by coherent x-ray diffraction.

When using coherent x-rays to perform lensless imaging, it is the complex wave field exiting the sample or, in the case of the Bragg geometry, the deformed electron density distribution of a crystal, that is being sought. For most samples, to some extent, the image will be complex, containing both an amplitude and phase variation across the sample. We have developed versions of the hybrid input-output (HIO) and error reduction (ER) algorithms that are very robust for the inversion to complex objects from three-dimensional (3D) coherent x-ray diffraction (CXD) data measured around a Bragg spot of a small crystal. The development and behavior of these algorithms will be discussed in the context of inverting a 3D CXD pattern measured around a (111) Bragg spot of a silver nanocube.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Extended superposed quantum-state initialization using disjoint prime implicants

Extended superposed quantum-state initialization using disjoint prime implicants is an algorithm for generating quantum arrays for the purpose of initializing a desired quantum superposition. The quantum arrays generated by this algorithm almost always use fewer gates than other algorithms and in the worst case use the same number of gates. These improvements are achieved by allowing certain parts of the quantum superposition that cannot be initialized directly by the algorithm to be initialized using special circuits. This allows more terms in the quantum superposition to be initialized at the same time which decreases the number of gates required by the generated quantum array.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Demodulation of a single complex fringe interferogram with a path-independent regularized phase-tracking technique

The two-dimensional regularized phase-tracking (RPT) technique is one of the most powerful approaches to demodulate a single interferogram with either open or closed fringes. However, it often fails in the cases of complex interferograms and needs well-defined scanning strategies. An improved algorithm based on the RPT is presented in this paper. We use a paraboloid phase model to approximate the phase function and modify the cost functional to search the smoothest phase solutions in the function space C{sup 2}. With these modifications, the phase tracker preserves the robustness of the RPT while at the same time it is no more sensitive to stationary points and is capable of demodulating complex interferograms with arbitrary scanning schemes. Moreover, the phase reconstructed by the proposed algorithm is normally more accurate than that of the RPT both for noiseless and noisy interferograms under the same conditions. Computer simulations and experimental results are both presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Overall chilled water system energy consumption modeling and optimization

The emergence of increasingly affordable variable-speed drive technology has changed the approach used to control chilled water systems equipped with these drives. The purpose of this research was to develop an integrated chilled water modeling technique that can determine the optimal system setpoints and estimate the energy saving potential of chiller system. The chiller system equipped with Variable Frequency Drives (VFDs) on cooling tower fans and condenser water pumps. To accomplish the objective, physical component models of the centrifugal chiller, cooling tower and condenser water pump were established with the goal of incorporating the system’s condenser water flow rate and cooling tower fan speeds as optimization variables. Furthermore, a cooling load prediction algorithm was developed using a multiple non-linear regression model to approximate the building’s cooling load subject to a range of environmental conditions. The inputs and outputs of the individual component models were linked to estimate how adjusting the cooling tower fan and condenser water pump speed would influence the system’s comprehensive performance. Here, the overall system model was then optimized using a generalized reduced gradient optimization algorithm to determine the potential energy savings through speed control with VFDs and to ascertain a control logic strategy for the building automation system to operate the heating and cooling system. A case-study was performed on a single chiller system at a museum and the model was calibrated according to logged data collected over four months. Results showed that for the system analyzed, the energy saving of optimizing the cooling tower fan system was found to be 12–15%, while the energy saving potential of optimizing the condenser water pump with the cooling tower fan was negligible. Additionally, comparing different cooling tower fan control strategies showed that a wet-bulb approach-based cooling tower control strategy was shown to have the highest correlation to the optimized fan speed with an R 2 of 0.924.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

ELSI: A unified software interface for Kohn–Sham electronic structure solvers

Solving the electronic structure from a generalized or standard eigenproblem is often the bottleneck in large scale calculations based on Kohn-Sham density-functional theory. This problem must be addressed by essentially all current electronic structure codes, based on similar matrix expressions, and by high-performance computation. We here present a unified software interface, ELSI, to access different strategies that address the Kohn-Sham eigenvalue problem. Currently supported algorithms include the dense generalized eigensolver library ELPA, the orbital minimization method implemented in libOMM, and the pole expansion and selected inversion (PEXSI) approach with lower computational complexity for semilocal density functionals. The ELSI interface aims to simplify the implementation and optimal use of the different strategies, by offering (a) a unified software framework designed for the electronic structure solvers in Kohn-Sham density-functional theory; (b) reasonable default parameters for a chosen solver; (c) automatic conversion between input and internal working matrix formats, and in the future (d) recommendation of the optimal solver depending on the specific problem. As a result, comparative benchmarks are shown for system sizes up to 11,520 atoms (172,800 basis functions) on distributed memory supercomputing architectures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Active Learning Accelerated Discovery of Stable Iridium Oxide Polymorphs for the Oxygen Evolution Reaction

The discovery of high-performing and stable materials for sustainable energy applications is a pressing goal in catalysis and materials science. Understanding the relationship between a material’s structure and functionality is an important step in the process, such that viable polymorphs for a given chemical composition need to be identified. Machine-learning-based surrogate models have the potential to accelerate the search for polymorphs that target specific applications. Herein, we report a readily generalizable active-learning (AL) accelerated algorithm for identification of electrochemically stable iridium oxide polymorphs of IrO 2 and IrO 3 . The search is coupled to a subsequent analysis of the electrochemical stability of the discovered structures for the acidic oxygen evolution reaction (OER). Structural candidates are generated by identifying all 956 structurally unique AB2 and AB3 prototypes in existing materials databases (more than 38000). Next, using an active learning approach, we find 196 IrO 2 polymorphs within the thermodynamic amorphous synthesizability limit and reaffirm the global stability of the rutile structure. We find 75 synthesizable IrO 3 polymorphs and report a previously unknown FeF 3 -type structure as the most stable, termed α-IrO 3 . To test the algorithms performance, we compare to a random search of the candidate space and report at least a 2-fold increase in the rate of discovery. Additionally, the AL approach can acquire the most stable polymorphs of IrO 2 and IrO 3 with fewer than 30 density functional theory optimizations. Analysis of the structural properties of the discovered polymorphs reveals that octahedral local coordination environments are preferred for nearly all low-energy structures. Subsequent Pourbaix Ir–H 2 O analysis shows that α-IrO3 is the globally stable solid phase under acidic OER conditions and supersedes the stability of rutile IrO 2 . Calculation of theoretical OER surface activities reveal ideal weaker binding of the OER intermediates on α-IrO 3 than on any other considered iridium oxide. We emphasize that the proposed AL algorithm can be easily generalized to search for any binary metal oxide structure with a defined stoichiometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical investigations of mismatch induced halos in intense charged particle beams

In this paper, we discuss the parametric resonance model of halo creation, and compare it with self consistent simulation results. In particular, we employ two different initial distribution functions, and we find agreement with the particle-core model, within the limitations of the latter. Furthermore, using a simple particle tracking algorithm, we are able to follow the trajectories of the halo particles, noting that a large number of them go through the core and re-emerge later.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Small satellite attitude determination based on GPS/IMU data fusion

In this paper, we present the mathematical models and algorithms that describe the problem of attitude determination for a small satellite using measurements from three angular rate sensors (ARS) and aiding measurements from multiple GPS receivers/antennas rigidly attached to the platform of the satellite.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An efficient method for energy levels calculation using full symmetry and exact kinetic energy operator: Tetrahedral molecules

A simultaneous use of the full molecular symmetry and of an exact kinetic energy operator (KEO) is of key importance for accurate predictions of vibrational levels at a high energy range from a potential energy surface (PES). An efficient method that permits a fast convergence of variational calculations would allow iterative optimization of the PES parameters using experimental data. In this work, we propose such a method applied to tetrahedral AB{sub 4} molecules for which a use of high symmetry is crucial for vibrational calculations. A symmetry-adapted contracted angular basis set for six redundant angles is introduced. Simple formulas using this basis set for explicit calculation of the angular matrix elements of KEO and PES are reported. The symmetric form (six redundant angles) of vibrational KEO without the sin(q){sup −2} type singularity is derived. The efficient recursive algorithm based on the tensorial formalism is used for the calculation of vibrational matrix elements. A good basis set convergence for the calculations of vibrational levels of the CH{sub 4} molecule is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Search on a hypercubic lattice using a quantum random walk. I. d>2

Random walks describe diffusion processes, where movement at every time step is restricted to only the neighboring locations. We construct a quantum random walk algorithm, based on discretization of the Dirac evolution operator inspired by staggered lattice fermions. We use it to investigate the spatial search problem, that is, to find a marked vertex on a d-dimensional hypercubic lattice. The restriction on movement hardly matters for d>2, and scaling behavior close to Grover's optimal algorithm (which has no restriction on movement) can be achieved. Using numerical simulations, we optimize the proportionality constants of the scaling behavior, and demonstrate the approach to that for Grover's algorithm (equivalent to the mean-field theory or the d{yields}{infinity} limit). In particular, the scaling behavior for d=3 is only about 25% higher than the optimal d{yields}{infinity} value.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Application of permutation entropy method in the analysis of chaotic, noisy, and chaotic noisy series

We have considered a permutation entropy method for analyzing chaotic, noisy, and chaotic noisy series. We have introduced the concept of permutation entropy from a survey of some features of information entropy (Shannon entropy), described the algorithm for its calculation, and indicated the advantages of this approach in the analysis of time series; the application of this method in the analysis of various model systems and experimental data has also been demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chemical, Biological, Radiological, Nuclear, and Explosives (CBRNE) Sensing XXI

This volume contains 12 sessions, 28 papers and 26 presentations on the following topics: Photonic Integrated Circuits and Plasmonic Sensing; Advancs in CBE Signature Modeling and Sensor Algorithms I; Standoff Sensing of CBRNE Hazards I; Standoff Sensing of CBRNE Hazards II; Advances in CBE Signature Modeling and Sensor Algorithms II; Biological Hazard Sensing; Chemical Hazard Sensing; Joint Session with Conferences 11390 and 11416: Spectroscopy for CBRNE Detection and Warning; Radiological and Nuclear Sensing; Explosive Material Sensing; Poster Session.

47 OTHER INSTRUMENTATION↗