Search NASA⌕ Search

SEARCH · Search NASA

Results for “high modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

The influence of pressure on the structure of a 2D uranium(VI) carboxyphosphonoate compound

We report the first quantitative analysis of the structural evolution of a uranyl bearing coordination polymer in response to pressure. The material that is central to this study, (UO{sub 2})(O{sub 3}PCH{sub 2}CO{sub 2}H) (1), is constructed from rigid 2D inorganic layers comprising edge sharing UO{sub 7} pentagonal bipyramids cross-linked by [PO{sub 3}(COOH)]{sup 2−} anions. Strong hydrogen bonding interactions exist between the pendent carboxylic acid groups on adjacent layers. Under pressure, 1 exhibits compressional behaviour primarily in the direction perpendicular to the inorganic layers, which is aided by a reduction in the interlayer distance and shifting of the layers with respect to each other. The bulk modulus for the 2D compound 1 is unexpectedly high [18.1(1) GPa] and is within the range reported for 3D CPs assembled from Zn{sup II} cations and inflexible imidazolate anions, and is at the lower end of the range of moduli observed for aluminosilicate zeolites (19–59 GPa). - Graphical Abstract: The compression mechanism and elastic constants for a 2D Uranium(VI) carboxyphosphonoate compound are reported. - Highlights: • The response to pressure of a uranium carboxyphosphonoate compound has been studied. • High-pressure single-crystal XRD data for this 2D uranium compound were collected. • Elastic constants for this material have been determined. • The compression mechanism for the compound has been elucidated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiscale experimental characterization of coatings on ceramics: A case study of tungsten on SiC

State-of-the-art transmission Kikuchi diffraction (TKD) and high-speed nano-indentation were combined with glow-discharge optical emission spectroscopy (GDOES), transmission electron microscopy (TEM) and micro-cantilever testing to characterize microstructures and mechanical properties of coatings on a ceramic substrate. The goal was to develop a multiscale experimental characterization method to assess the coating/substrate couple. A tungsten coated silicon carbide substrate was the system used for this development. The combination of GDOES, TEM and TKD enabled precise phase identification in the system, while TKD provided superior spatial resolution for phase identification. Here micro-cantilever tests were able to measure adhesion strength, with support from high-speed nano-indentation which enabled rapid modulus and hardness determination over relatively large areas.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of Carbon Microbeads

We report a microfluidic-based droplet generation platform for synthesizing micron-sized porous carbon microspheres. The setup employs carbon materials such as graphite, carbon nanotubes, graphene, fullerenes, and carbon black as starting materials. Custom composition, structure, and function are achieved through combinations of carbon materials, cross-linkers, and additives along with variations in process parameters. Carbon materials can be assembled into spheres with a mean diameter of units to hundreds of μm with relatively tight size distribution (<25% RSD). Pore structure and size (tens to hundreds of angstrom) can be modulated by incorporating porogen/coporogen dilutants during synthesis. The microbeads have excellent mechanical stability with an elastic modulus of hundreds of MPa. They can sustain high dynamic fluid flow pressures of up to 9000 psi. This work lays the foundation for synthesizing novel tailorable and customizable carbon microbeads. It opens avenues for applying these novel materials for composite and additive manufacturing, energy, life science, and biomedical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Renewable Epoxy Thermosets from Fully Lignin-Derived Triphenols

A series of fully renewable triphenols (TPs) with various number of methoxy group substituents (n = 0–6) were synthesized using lignin-derived phenols (guaiacol and 2,6-dimethoxyphenol) and aldehydes (4-hydroxybenzaldehyde, vanillin, and syringaldehyde). The structural evolution from TPs to epoxy thermosets was followed by nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR) spectroscopy. Thermomechanical properties of the resulting epoxy thermosets were investigated by dynamic mechanical analysis (DMA), tensile analysis (TA), and thermogravimetric analysis (TGA). Increasing the content of methoxy groups decreased the glass transition temperature (132–118 °C) and glassy modulus (2.7–2.2 GPa). Thermal stability of high-methoxy-content thermosets was reduced due to electron-donating effects and higher oxygen content. Conversions and isolated yields of TPs significantly decreased as the number of methoxy substituents increased, which markedly determined the feasibility of TPs as precursors for polymers. This work widens the synthesis route of fully lignin-derived polyphenols, yielding polymers with thermomechanical properties comparable to bisphenol A (BPA) based materials. Finally, evaluation of methoxy substitution provides insight for the selection of lignin-derived monomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scattering mechanical performances for brittle bulk metallic glasses

Scattering mechanical performances of brittle La- and Mg-based BMGs are found in the present study. Upon dynamic loading, there exist largely scattered fracture strengths even if the strain rates are under the same order, and the BMG systems are the same. The negative strain rate dependence for La- and Mg-based BMGs is obtained, i.e., a decreased fracture strength is dominating from quasi-static to dynamic compression. At cryogenic temperatures, distinguishingly low fracture strengths are available for these two brittle BMGs, and decreased tolerance to accommodate strains makes BMGs more and more brittle. It is concluded that the scattering mechanical performances of brittle BMGs should be carefully evaluated before actual applications.

36 MATERIALS SCIENCE↗

Elastic module of superhard rhenium diboride

The elastic moduli of polycrystalline rhenium diboride are measured as a function of temperature between 5 and 325 K. The room temperature results show that ReB{sub 2} has very high values for both the bulk and shear modulus, confirming the incompressible and superhard nature of this material. With decreasing temperature, the moduli increase, with a hint of softening below 50 K.

36 MATERIALS SCIENCE↗

Room temperature mechanical properties of shuttle thermal protection system materials

Tests were conducted at room temperature to determine the mechanical properties and behavior of materials used for the thermal protection system of the space shuttle. The materials investigated include the LI-900 RSI tiles, the RTV-560 adhesive and the .41 cm (.16 thick) strain isolator pad (SIP). Tensile and compression cyclic loading tests were conducted on the SIP material and stress-strain curves obtained for various proof loads and load cyclic conditioning. Ultimate tensile and shear tests were conducted on the RSI, RTV, and SIP materials. The SIP material exhibits highly nonlinear stress-strain behavior, increased tangent modulus and ultimate tensile strength with increased loading rate, and large short time load relaxation and moderate creep behavior. Proof and cyclic load conditioning of the SIP results in permanent deformation of the material, hysteresis effects, and much higher tensile tangent modulus values at large strains.

Sawyer, J. W.↗

Effects of Interface Modification on Mechanical Behavior of Hi-Nicalon Fiber-Reinforced Celsian Matrix Composites

Unidirectional celsian matrix composites having approx. 42 volume percent of uncoated or BN/SiC-coated Hi-Nicalon fibers were tested in three-point bend at room temperature. The uncoated fiber-reinforced composites showed catastrophic failure with strength of 210 +/- 35 MPa and a flat fracture surface. In contrast, composites reinforced with BN/SiC-coated fibers exhibited graceful failure with extensive fiber pullout. Values of first matrix cracking stress and strain were 435 +/- 35 MPa and 0.27 +/- 0.01 %, respectively, with ultimate strength as high as 960 MPa. The elastic Young's modulus of the uncoated and BN/SiC-coated fiber-reinforced composites were measured as 184 q 4 GPa and 165 +/- 5 GPa, respectively. Fiber push-through tests and microscopic examination indicated no chemical reaction at the uncoated or coated fiber-matrix interface. The low strength of the uncoated fiber-reinforced composite is probably due to degradation of the fibers from mechanical surface damage during processing. Because both the coated and uncoated fiber reinforced composites exhibited weak interfaces, the beneficial effect of the BN-SiC dual layer is primarily the protection of fibers from mechanical damage during processing.

Bansal, Narottam P.↗

The Effect of Gravity on the Combustion Synthesis of Porous Biomaterials

Production of highly porous composite materials by traditional materials processing is limited by difficult processing techniques. This work investigates the use of self propagating high temperature (combustion) synthesis (SHS) to create porous tricalcium phosphate (Ca3(PO4)2), TiB-Ti, and NiTi in low and microgravity. Combustion synthesis provides the ability to use set processing parameters to engineer the required porous structure suitable for bone repair or replacement. The processing parameters include green density, particle size, gasifying agents, composition, and gravity. The advantage of the TiB-Ti system is the high level of porosity achieved together with a modulus that can be controlled by both composition (TiB-Ti) and porosity. At the same time, NiTi exhibits shape memory properties. SHS of biomaterials allows the engineering of required porosity coupled with resorbtion properties and specific mechanical properties into the composite materials to allow for a better biomaterial.

Castillo, M.↗

Temperature Effects on Adhesive Bond Strengths and Modulus for Commonly Used Spacecraft Structural Adhesives

A study was performed to observe how changes in temperature and substrate material affected the strength and modulus of an adhesive bondline. Seven different adhesives commonly used in aerospace bonded structures were tested. Aluminum, titanium and Invar adherends were cleaned and primed, then bonded using the manufacturer's recommendations. Following surface preparation, the coupons were bonded with the adhesives. The single lap shear coupons were then pull tested per ASTM D 1002 Standard Test Method for Apparent Shear Strength of Single- Lap-Joint over a temperature range from -150 deg C up to +150 deg C. The ultimate strength was calculated and the resulting data were converted into B-basis design allowables. Average and Bbasis results were compared. Results obtained using aluminum adherends are reported. The effects of using different adherend materials and temperature were also studied and will be reported in a subsequent paper. Dynamic Mechanical Analysis (DMA) was used to study variations in adhesive modulus with temperature. This work resulted in a highly useful database for comparing adhesive performance over a wide range of temperatures, and has facilitated selection of the appropriate adhesive for spacecraft structure applications.

structural adhesives testing↗

Stretchable and Self‐Healable Semiconductive Composites Based on Hydrogen Bonding Cross‐linked Elastomeric Matrix

Abstract Semiconductors with both high stretchability and self‐healing capability are highly desirable for various wearable devices. Much progress has been achieved in designing highly stretchable semiconductive polymers or composites. The demonstration of self‐healable semiconductive composite is still rare. Here, an extremely soft, highly stretchable, and self‐healable hydrogen bonding cross‐linked elastomer, amide functionalized‐polyisobutylene (PIB‐amide) is developed, to enable a self‐healable semiconductive composite through compounding with a high‐performance conjugated diketopyrrolopyrrole (DPP‐T) polymer. The composite, consisting of 20% DPP‐T and 80% PIB‐amide, shows record high crack‐onset strain (COS ≈1500%), extremely low elastic modulus (E≈1.6 MPa), and unique ability to spontaneously self‐heal atroom temperature within 5 min. Unlike previous works, these unique composite materials also show strain‐independent charge mobility. An in‐depth morphological study based on multi‐model techniques indicate that all composites show blending ratio‐ and stretching‐independent fibril‐like aggregation due to the strong hydrogen bond in elastomer to enable the unique stable charge mobility. This study provides a new direction to develop highly healable and electronically stable semiconductive composite and will enable new applications of stretchable electronics.

Chemistry↗

Mechanics of Gold Nanoparticle Superlattices at High Hydrostatic Pressure

Pressure-driven assembly of ligand-grafted gold nanoparticle superlattices is a promising approach for fabricating gold nanostructures, such as nanowires and nanosheets. However, optimizing this fabrication method requires an understanding of the mechanics of their complex hierarchical assemblies at high pressures. We use molecular dynamics simulations to characterize the response of alkanethiol-grafted gold nanoparticle superlattices to applied hydrostatic pressures up to 15 GPa, and demonstrate that the internal mechanics significantly depend on ligand length. At low pressures, intrinsic voids govern the mechanics of pressure-induced compaction, and the dynamics of collapse of these voids under pressure depend significantly on ligand length. These microstructural observations correlate well with the observed trends in bulk modulus and elastic constants. For the shortest ligands at high pressures, coating failure leads to gold core-core contact, an augur of irreversible response and eventual sintering. This behavior was unexpected under hydrostatic loading, and was only observed for the shortest ligands.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Early development of multifilament polyacrylonitrile-derived structural hollow carbon fibers from a segmented arc spinneret

Carbon fiber is a highly desired material for structural applications requiring high strength and stiffness and low weight but has seen only incremental improvements in properties over the last few decades. Further increases in carbon fiber specific properties, including specific strength and specific modulus, would further propel its unique capabilities. One method to produce high specific property carbon fibers for structural applications is the development of hollow carbon fibers. In this work, we report on the early development of polyacrylonitrile-derived structural hollow carbon fibers. Here, multifilament, continuous tow, polyacrylonitrile-based precursor hollow fibers were successfully produced utilizing a segmented arc spinneret approach. When batch oxidized, the hollow precursor fibers demonstrated evidence of oxidation proceeding from both the interior and exterior of the filament. Further results suggested that reducing the precursor hollow fiber wall thickness would allow for complete, homogeneous oxidation, thereby avoiding the skin-core structure often observed in commercial carbon fiber. Here, hollow carbon fibers were as small as 35 µm outer diameter, 22 µm inner diameter (6.5 µm wall thickness). At these diameters, the hollow carbon effective fiber specific strength was 0.54 N/tex and the effective specific modulus was 120 N/tex, approaching the effective specific modulus of T700S at 136 N/tex.

36 MATERIALS SCIENCE↗

Two Co-occurring Liana Species Strongly Differ in Their Hydraulic Traits in a Water-Limited Neotropical Forest

Lianas are a key growth form in tropical forests. They are believed to be strong competitors for water, thanks to their presumed efficient vascular systems. However, despite being a large polyphyletic group, they are currently often considered as a functionally homogeneous entity. In this study, we challenged this assumption by estimating the variability in hydraulic traits of two common, co-occurring liana species in a water-limited environment, namely, a seasonally dry tropical forest in Costa Rica. We measured vulnerability to embolism at the leaf and branch levels using two different methods (optical and acoustic vulnerability) and found that both species had very different hydraulic properties. Compared to reported P 50 values in literature, we found two extreme P 50 values: a low value for Bignonia diversifolia (−4.30 ± 0.54 MPa at the leaf level; −7.42 ± 0.54 MPa at the branch level) and a high value for Cissus microcarpa (−1.07 ± 0.14 at the leaf level; −1.20 ± 0.05 MPa at the branch level). Furthermore, B. diversifolia had a higher apparent modulus of elasticity in the radial direction (556.6 ± 401.0 MPa) and a variable midday water potential. On the other hand, C. microcarpa had a low apparent modulus of elasticity in the radial direction (37.8 ± 26.3 MPa) and a high branch water content, which enabled the species to keep its water potential stable during the dehydration experiments and during a drought period in the field. This mechanism may enable this species to coexist with species that are more resistant to drought-induced embolisms such as B. diversifolia . Although only two species were studied, considerable overlap was found between the range of hydraulic properties of trees growing in the same location and trees and lianas growing in two forests in Panama. These findings demonstrate that lianas cannot be considered as a homogeneous group and call for further research into the intra-growth form diversity of liana properties.

Coppieters, Kasper↗

In-situ small-scale mechanical testing of fast reactor mixed oxide pins: completion report

The present work represents a pioneering study in the application of advanced techniques to measure micro-mechanical properties of highly radioactive advanced nuclear fuels. First data of Young’s modulus and hardness of fast reactor MOX at burnup exceeding 150 GWd/tHM have been obtained. Despite the challenges encountered in the current work due to equipment malfunction, the experimental approach sought in this work has been proved successful in obtaining new data of high relevance for fuel performance on system with high Pu content and high radiotoxicity with extremely limited exposure to personnel. Further experiments will be conducted in the future based on the present approach, leveraging the experience gained in this project.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Analysis of the Stable Interphase Responsible for the Excellent Electrochemical Performance of Graphite Electrodes in Sodium-Ion Batteries

Considerable efforts have been exerted to understand the formation and properties of the solid electrolyte interphase (SEI) in sodium ion batteries. However, the puzzling existence and role of SEI behind the huge volume changes of the graphite electrodes need to be answered. Herein, the reason of how ether-derived SEI maintains excellent reversibility despite the huge volume changes during cycling is unraveled. Theoretical simulations and Fourier-transform infrared spectroscopy demonstrate the formation mechanism of an SEI between the graphite anode and electrolyte. Furthermore, the high mechanical tolerance of the ether-derived SEI is confirmed in atomic force microscopy. A depth profile of X-ray photoelectron spectroscopy points to a multilayer structure of the ether-derived SEI. The outer layer comprises organics (sodium alkoxide), while the inorganics (Na 2 CO 3 , NaF) in interior region are mixed with some organics. Notably, the presence of organics ensures the adaptability of the SEI to the volume expansion of graphite during cycling, and the concentrated distribution of inorganics improves the Young's modulus (resistance to deformation). Therefore, the graphite anode exhibits high cycle stability (96.6% capacity retention ratio at 1 A g –1 over 860 cycles) and efficiency (≈99.5%).

25 ENERGY STORAGE↗

Influence of isothermal hot pressing-doping treatment on the electrical and mechanical properties of bulk Bi-Sr-Ca-Cu-O

The influences of (isothermal hot pressing-doping) treatment on the microstructure, electrical and mechanical properties of Bi{sub 2}Sr{sub 3-x}Ca{sub x}Cu{sub 2}O{sub 8+δ} (BSCCO), x ranging from 0.0 to 2 are assessed. BSCCO pellets were prepared by isothermal hot pressing (IHP) technique. The experimental works in this study consists of dc electrical resistivity measurements for electrical and superconducting properties, microhardness tests for mechanical characteristics, powder x-ray diffraction (XRD) for phase analyses (phase ratio), differential thermal analysis (DTA) for melting behaviour and scanning electron microscopy (SEM) for microstructure investigations. The results indicated that the Ca{sup 2+} doping and isothermal hot pressing increased significantly the superconducting transition temperature (T{sup o}{sub c}), which promotes the formation of high-Tc phase. Additionally, Vickers microhardness (VHN), Young's modulus, fracture toughness, brittleness index and elastic stiffness coefficient were also improved. Moreover, IHP-Doping improved the microstructure and the density of the BSCCO studied samples. Microhardness was found to be load dependent. Otherwise, we evaluated the load independent hardness, Young's modulus, fracture toughness and brittleness index of BSCCO samples. The possible reasons for the observed enhancement in electrical and mechanical properties due to (i) the homogeneity of grain region distribution (ii) the enhancement of superconducting phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time and temperature dependent modulus of pyrrone and polyimide moldings

A method is presented by which the modulus obtained from a stress relaxation test can be used to estimate the modulus which would be obtained from a sonic vibration test. The method was applied to stress relaxation, sonic vibration, and high speed stress-strain data which was obtained on a flexible epoxy. The modulus as measured by the three test methods was identical for identical test times, and a change of test temperature was equivalent to a shift in the logarithmic time scale. An estimate was then made of the dynamic modulus of moldings of two Pyrrones and two polyimides, using stress relaxation data and the method of analysis which was developed for the epoxy. Over the common temperature range (350 to 500 K) in which data from both types of tests were available, the estimated dynamic modulus value differed by only a few percent from the measured value. As a result, it is concluded that, over the 500 to 700 K temperature range, the estimated dynamic modulus values are accurate.

Lander, L. L.↗