Search NASA⌕ Search

SEARCH · Search NASA

Results for “liquid structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Comparison of the static structure factor at long wavelengths for a dusty plasma liquid and other liquids

Especially small values of the static structure factor S(k) at long wavelengths, i.e., small k, were obtained in an analysis of experimental data, for a two-dimensional dusty plasma in its liquid state. For comparison, an analysis of S(k) data was carried out for many previously published experiments with other liquids. Here, the latter analysis indicates that the magnitude of S(k) at small k is typically in a range 0.02–0.13. In contrast, the corresponding value for a dusty plasma liquid was found to be as small as 0.0139. Another basic finding for the dusty plasma liquid is that S(k) at small k generally increases with temperature, with its lowest value, noted above, occurring near the melting point. Simulations were carried out for the dusty plasma liquid, and their results are generally consistent with the experiment. Since a dusty plasma has a soft interparticle interaction, our findings support earlier theoretical suggestions that a useful design strategy for creating materials having exceptionally low values of S(0), so-called hyperuniform materials, is the use of a condensed material composed of particles that interact softly at their periphery.

2-dimensional systems↗

Thermographic Leak Detection of the Space Shuttle Main Engine Nozzle

The Space Shuttle Main Engines Nozzles consist of over one thousand tapered Inconel coolant tubes brazed to a stainless steel structural jacket. Liquid Hydrogen flows through the tubing, from the aft to forward end of the nozzle, under high pressure to maintain a thermal balance between the rocket exhaust and the nozzle wall. Three potential problems occur within the SSME nozzle coolant tubes as a result of manufacturing anomalies and the highly volatile service environment including poor or incomplete bonding of the tubes to the structural jacket, cold wall leaks and hot wall leaks. Of these conditions the identification of cold wall leaks has been the most problematic. The methods and results presented in this summary addresses the thermographic identification of cold wall "interstitial" leaks between the structural jacket and coolant tubes of the Space Shuttle Main Engines Nozzles.

Walker, James L.↗

Propagation-based phase-contrast tomography for high-resolution lung imaging with laboratory sources

We have performed high-resolution phase-contrast tomography on whole mice with a laboratory setup. Enabled by a high-brilliance liquid-metal-jet source, we show the feasibility of propagation-based phase contrast in local tomography even in the presence of strongly absorbing surrounding tissue as it is the case in small animal imaging of the lung. We demonstrate the technique by reconstructions of the mouse lung for two different fields of view, covering the whole organ, and a zoom to the local finer structure of terminal airways and alveoli. With a resolution of a few micrometers and the wide availability of the technique, studies of larger biological samples at the cellular level become possible.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

On the effect of strain rate during the cyclic compressive loading of liquid crystal elastomers and their 3D printed lattices

Nematic liquid crystal elastomers (LCEs) are a unique class of network polymers with the potential for enhanced mechanical energy absorption and dissipation capacity over conventional network polymers because they exhibit both conventional viscoelastic behavior and soft-elastic behavior (nematic director changes under shear loading). This additional inelastic mechanism makes them appealing as candidate damping materials in a variety of applications from vibration to impact. The lattice structures made from the LCEs provide further mechanical energy absorption and dissipation capacity associated with packing out the porosity under compressive loading. Understanding the extent of mechanical energy absorption, which is the work per unit mass (or volume) absorbed during loading, versus dissipation, which is the work per unit mass (or volume) dissipated during a loading cycle, requires measurement of both loading and unloading response. Here, in this study, a bench-top linear actuator was employed to characterize the loading-unloading compressive response of polydomain and monodomain LCE polymers and polydomain LCE lattice structures with two different porosities (nominally, 62% and 85%) at both low and intermediate strain rates at room temperature. As a reference material, a bisphenol-A (BPA) polymer with a similar glass transition temperature (9 °C) as the nematic LCE (4 °C) was also characterized at the same conditions for comparing to the LCE polymers. Based on the loading-unloading stress-strain curves, the energy absorption and dissipation for each material at different strain rates (0.001, 0.1, 1, 10 and 90 s -1 ) were calculated with considerations of maximum stress and material mass/density. The strain-rate effect on the mechanical response and energy absorption and dissipation behaviors was determined. The energy dissipation ratio was also calculated from the resultant loading and unloading stress-strain curves. All five materials showed significant but different strain rate effects on energy dissipation ratio. The solid LCE and BPA materials showed greater energy dissipation capabilities at both low (0.001 s -1 ) and high (above 1 s -1 ) strain rates, but not at the strain rates in between. The polydomain LCE lattice structure showed superior energy dissipation performance compared with the solid polymers especially at high strain rates.

36 MATERIALS SCIENCE↗

Intermolecular Network Theory:A General Approach for Understanding the Structural and Dynamic Properties of Liquids and Solutions

Graph theory applications within the physical sciences have a long history. However, it has never moved to the forefront of analytical techniques employed by the computational chemistry community. Though much of the earliest work leveraged percolation theory as a backdrop for understanding critical phenomena and phase transitions within statistical mechanical simulations, modern data science has much to contribute. Here in this paper, we focus on the realm of intermolecular networks, where vertices represent molecules or particles, and an edge represents an intermolecular or interparticle interaction. These interactions are widely understood to dictate many of the physical properties of soft matter, and for liquids in particular, understanding this network is essential. Consider the sheer volume of ~70 years of literature associated with the hydrogen bond network of water, a topic that remains an active area of research even today. The aim of this work is twofold: first, to put into context prior algorithms and analyses that employed “connectedness theory” or lattice-based models to understand the intermolecular networks of chemical systems; and second to discuss a more general strategy for analyzing the multiscale structural and dynamic properties of chemical systems—intermolecular network theory. This approach encompasses foundational methods such as percolation theory, but also utilizes contemporary graph theoretical analyses that have evolved alongside the development of the World Wide Web, cloud computing, and big data. It is the realm of intermolecular network theory to determine the relationships between the essential physics of a system and the topological properties of the network and to derive new techniques in graph theory that can be related to the underlying physico-chemical or reactive properties of a system. Examples are used throughout this chapter that demonstrate applications to a wide variety of complex chemical systems, including ion association within electrolytes, mass transport and the properties of liquid–liquid phase boundaries, and multicomponent solutions.

Complex networks↗

The structure of water around the compressibility minimum

Here we present diffraction data that yield the oxygen-oxygen pair distribution function, g{sub OO}(r) over the range 254.2–365.9 K. The running O-O coordination number, which represents the integral of the pair distribution function as a function of radial distance, is found to exhibit an isosbestic point at 3.30(5) Å. The probability of finding an oxygen atom surrounding another oxygen at this distance is therefore shown to be independent of temperature and corresponds to an O-O coordination number of 4.3(2). Moreover, the experimental data also show a continuous transition associated with the second peak position in g{sub OO}(r) concomitant with the compressibility minimum at 319 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure of dimethylformamidium bis(trifluoromethanesulfonyl)amide: an ionic liquid

At 100 K, the title molecular salt, C 3 H 8 NO + ·C 2 F 6 NO 4 S 2 - , has orthorhombic ( P 2 1 2 1 2 1 ) symmetry; the amino H atom of bis(trifluoromethanesulfonyl)amine (HNTf 2 ) was transferred to the basic O atom of dimethylformamide (DMF) when the ionic liquid components were mixed. The structure displays an O—H...N hydrogen bond, which links the cation to the anion, which is reinforced by a non-conventional C—H...O interaction, generating an R 2 2 (7) loop. A further very weak C—H...O interaction generates an [001] chain.

bio-inspired↗

Fast plane wave density functional theory molecular dynamics calculations on multi-GPU machines

Plane wave pseudopotential (PWP) density functional theory (DFT) calculation is the most widely used method for material simulations, but its absolute speed stagnated due to the inability to use large scale CPU based computers. By a drastic redesign of the algorithm, and moving all the major computation parts into GPU, we have reached a speed of 12 s per molecular dynamics (MD) step for a 512 atom system using 256 GPU cards. This is about 20 times faster than the CPU version of the code regardless of the number of CPU cores used. Our tests and analysis on different GPU platforms and configurations shed lights on the optimal GPU deployments for PWP-DFT calculations. An 1800 step MD simulation is used to study the liquid phase properties of GaInP.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The solvation structures of cellulose microfibrils in ionic liquids

The use of ionic liquids for non-derivatized cellulose dissolution promises an alternative method for the thermochemical pretreatment of biomass that may be more efficient and environmentally acceptable than more conventional techniques in aqueous solution. Here, we performed equilibrium MD simulations of a cellulose microfibril in the ionic liquid 1-butyl-3-methylimidazolium chloride (BmimCl) and compared the solute structure and the solute-solvent interactions at the interface with those from corresponding simulations in water. The results indicate a higher occurrence of solvent-exposed orientations of cellulose surface hydroxymethyl groups in BmimCl than in water. Moreover, spatial and radial distribution functions indicate that hydrophilic surfaces are a preferred site of interaction between cellulose and the ionic liquid. In particular, hydroxymethyl groups on the hydrophilic fiber surface adopt a different conformation from their counterparts oriented towards the fiber s core. Furthermore, the glucose units with these solvent-oriented hydroxymethyls are surrounded by the heterocyclic organic cation in a preferred parallel orientation, suggesting a direct and distinct interaction scheme between cellulose and BmimCl.

09 BIOMASS FUELS↗

Sensitivity Analysis of Tunable Equation of State Material Model In Pulsed Mercury Target Simulation

A pulsed neutron spallation target is subjected to very short but intense loads from repeated proton pulses. Approximately 60% of the energy from each proton pulse is deposited into the mercury target material and the stainless-steel target structure, leading to a high-pressure region in both the stationary target structure and the flowing mercury. The high-pressure region propagates and leads to fluid-structure interaction. The resultant loading on the target structure containing liquid mercury is difficult to predict, although various simulation approaches and material models for the mercury have been tried. To date, the best match of simulation to experimental data is obtained by using an equation of state (EOS) material model with a specified tensile cutoff pressure, which simulates the cavitation threshold. The inclusion of a threshold to represent cavitation is key to the successful predictions of stress waves triggered by the high-energy pulse striking the mercury and vessel. However, recent measurements of target structure strain show that significant discrepancies remain between the measured and simulated strain values in the EOS mercury model. These differences grow when noncondensable helium gas is intentionally injected into the flowing mercury to reduce the loading on the structure. An EOS-based proportional–integral–derivative (PID) mercury model has been proposed to reduce the gap between the measured and simulated vessel strain responses for targets with gas injection. The conceptual and numerical description and initial investigation of the PID model are presented in previous work. Further studies of this PID model — including the sensitivity of the structure’s strain response to model parameters (the tensile cutoff, PID parameters Kp, Ki, and Kd) — are reported in this article. Results show the strain response is more sensitive to changes in the tensile cutoff value than to changes in the model parameters Kp, Ki, and Kd. These results will aid in future work where the model parameters will be optimized to match simulation data to strain measurements.

Lin, Lianshan↗

Switching and intrinsic position bistability of soliton beams in chiral nematic liquid crystals

We study theoretically and experimentally the propagation of light beams in chiral nematic liquid crystals. Despite the rather complex refractive index distribution of these crystals, their reorientational nonlinearity can compensate for diffraction, leading to robust solitonlike beams propagating along helical trajectories. We demonstrate that, due to a symmetry-breaking instability of the liquid crystal structure, these beams undergo abrupt switching and bistability, features that are of potential interest for applications to all-optical signal processing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bottom-up coarse-grained models that accurately describe the structure, pressure, and compressibility of molecular liquids

The present work investigates the capability of bottom-up coarse-graining (CG) methods for accurately modeling both structural and thermodynamic properties of all-atom (AA) models for molecular liquids. In particular, we consider 1, 2, and 3-site CG models for heptane, as well as 1 and 3-site CG models for toluene. For each model, we employ the multiscale coarse-graining method to determine interaction potentials that optimally approximate the configuration dependence of the many-body potential of mean force (PMF). We employ a previously developed “pressure-matching” variational principle to determine a volume-dependent contribution to the potential, U{sub V}(V), that approximates the volume-dependence of the PMF. We demonstrate that the resulting CG models describe AA density fluctuations with qualitative, but not quantitative, accuracy. Accordingly, we develop a self-consistent approach for further optimizing U{sub V}, such that the CG models accurately reproduce the equilibrium density, compressibility, and average pressure of the AA models, although the CG models still significantly underestimate the atomic pressure fluctuations. Additionally, by comparing this array of models that accurately describe the structure and thermodynamic pressure of heptane and toluene at a range of different resolutions, we investigate the impact of bottom-up coarse-graining upon thermodynamic properties. In particular, we demonstrate that U{sub V} accounts for the reduced cohesion in the CG models. Finally, we observe that bottom-up coarse-graining introduces subtle correlations between the resolution, the cohesive energy density, and the “simplicity” of the model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of an external electric field on the dynamics and intramolecular structures of ions in an ionic liquid

Simulations of the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide in an external electric field have been performed using a Drude particle polarizable force field. The structure of the ions has been analyzed, with close attention paid to the configurations of the ions. The “charge arm” concept is used to explain certain changes of these configurations that would be difficult to rationalize otherwise, e.g., trans → cis isomerization of the bis(trifluoromethylsulfonyl)imide anion and extension of the alkyl chain of the cation. It has also been shown that the ions orient themselves so that their charge arms align with and stretch out along the field, and these effects occur at lower external electric field strengths than cause a change in the inherent diffusion of the ions. Here, the dynamics of the system parallel and perpendicular to the field were analyzed, and it was found that the applied field affected the diffusion normal to the field. This is explained as a secondary effect of a change in the ion cage formed by the surrounding counterions of a given ion in the ionic liquid. The breakdown of the ion cages was rationalized by correlating changes to the inherent diffusion of the ions with other changes to the diffusion and bulk structure of the liquid, as well as considering the average forces on the ions compared to the force the ions would be expected to experience in an electric field. Parallel to the field, a drift was observed at every electric field studied. In electric fields with no changes to the ion cage structure, the relationship between the drift and electric field was found to be linear, becoming nonlinear as the ion cage structure breaks down.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-induced structural and dielectric changes in liquid water at room temperature

Understanding the pressure-dependent dielectric properties of water is crucial for a wide range of scientific and practical applications. In this study, we employ a deep neural network trained on density functional theory data to investigate the dielectric properties of liquid water at room temperature across a pressure range of 0.1–1000 MPa. We observe a nonlinear increase in the static dielectric constant ɛ 0 with increasing pressure, a trend that is qualitatively consistent with experimental observations. This increase in ɛ 0 is primarily attributed to the increase in water density under compression, which enhances collective dipole fluctuations within the hydrogen-bonding network as well as the dielectric response. Despite the increase in ɛ 0 , our results reveal a decrease in the Kirkwood correlation factor G K with increasing pressure. Furthermore, this decrease in G K is attributed to pressure-induced structural distortions in the hydrogen-bonding network, which weaken dipolar correlations by disrupting the ideal tetrahedral arrangement of water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High energy x-ray and neutron studies of disordered energy-related materials at extreme conditions

The fundamental scientific accomplishments are: (1) advances in a general description of the liquid state by employing structural models constrained by measurements to interpret experimental results and extend them to liquids in general, with special emphasis on (2) The structure of the high-temperature crystal and molten UO 2 and 3) water. Specifically, samples of UO 2 and water were probed using high-energy x-rays at the Advanced Photon Source. The high Z of UO 2 , and the 2-3mm diameter droplet shape of the molten sample, means that >100keV X-rays are required to minimize absorption and multiple scattering, which can distort the measured structure factor. A high flux of x-rays is also required to obtain sufficient statistical accuracy in short (a few seconds) measurement times. The scattered x-ray data were analyzed and pair distribution functions, extracted that characterize the local and long-range atomic structure of the material. The measurements of the hot UO 2 solid show a substantial increase in oxygen disorder and, upon melting, the average U-O coordination was found to decrease from 8 to 6.7±0.5. The research incorporated development of diffraction techniques, sample environment optimization and state-of-the-art simulation techniques. The symbiotic nature of the advances in simulation and experiment allowed for a more focused and informed development of future experiments, effective use of expensive beam time and generated new research agendas for the growing number of research groups, within the US and internationally, that focus on the structure of liquids. Molecular dynamics (MD) provided detailed information when combined with high-quality XN data including addressing key issues in liquids; the relationship between cooling path, structure and fictive temperature, and the trade-offs between network over connectedness in liquids containing low-coordination cations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tuning conformational structures of imidazolium ionenes with 1-ethyl-3-methylimidazolium ionic liquid solvents

In this report the structures and conformations of imidazolium ionenes solvated in 1-ethyl-3-methylimidazolium ionic liquids (ILs) ([C 2 mim + ][X - ]) are investigated using molecular dynamics simulations. Four different ionenes poly(decylimidazolium) (PD 10 ), poly(tetraethyleneglycolimidazolium) (PE 10 ), alternating copolymer (P(ED) 5 ), and a block copolymer PE 5 D 5 are immersed in [C 2 mim + ][X - ], where [X - ] = thiocyanate [SCN - ], tetrafluoroborate [BF 4 - ], and trifluoromethanesulfonate [TfO - ]. The radius of gyration indicates that the ionene chains are more extended when immersed in [TfO - ] compared to [BF 4 - ] and [SCN - ], while the solvent accessible surface area shows that PE 10 is the most contracted ionene among all systems. The electrostatic interactions between the ionenes and the ILs are very consistent with the inherent electrostatic characteristics of the different anions, which can be quantified using the Ionic Polarity Index (IPI). The ionene configurations and dynamics strongly depend on the backbone functionality and architecture of the chain, due to the balance between the inter- and intra-molecular interactions in these systems.

42 ENGINEERING↗

The Interfacial Assembly of Polyoxometalate Nanoparticle Surfactants

Polyoxometalates (POMs) using {Mo 72 V 30 } as an example, dissolved in water, can interact with amine-terminated polydimethylsiloxane (PDMS-NH 2 ) dissolved in toluene at the water/toluene interface to form POM-surfactants that significantly lower the interfacial tension and can be used to stabilize liquids via interfacial elasticity. The jamming of the POM-surfactants at the water/oil interface with consequent wrinkling occurs with a decrease in the interfacial area. Furthermore, the packing density of the POM-surfactants at the interface can be tuned by varying the strength of screening with the addition of cations with differing hydrated radii.

77 NANOSCIENCE AND NANOTECHNOLOGY↗