Search NASA⌕ Search

SEARCH · Search NASA

Results for “mobility models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Anomalous solute transport in saturated porous media: Relating transport model parameters to electrical and nuclear magnetic resonance properties

Abstract The advection‐dispersion equation (ADE) fails to describe commonly observed non‐Fickian solute transport in saturated porous media, necessitating the use of other models such as the dual‐domain mass‐transfer (DDMT) model. DDMT model parameters are commonly calibrated via curve fitting, providing little insight into the relation between effective parameters and physical properties of the medium. There is a clear need for material characterization techniques that can provide insight into the geometry and connectedness of pore spaces related to transport model parameters. Here, we consider proton nuclear magnetic resonance (NMR), direct‐current (DC) resistivity, and complex conductivity (CC) measurements for this purpose, and assess these methods using glass beads as a control and two different samples of the zeolite clinoptilolite, a material that demonstrates non‐Fickian transport due to intragranular porosity. We estimate DDMT parameters via calibration of a transport model to column‐scale solute tracer tests, and compare NMR, DC resistivity, CC results, which reveal that grain size alone does not control transport properties and measured geophysical parameters; rather, volume and arrangement of the pore space play important roles. NMR cannot provide estimates of more‐mobile and less‐mobile pore volumes in the absence of tracer tests because these estimates depend critically on the selection of a material‐dependent and flow‐dependent cutoff time. Increased electrical connectedness from DC resistivity measurements are associated with greater mobile pore space determined from transport model calibration. CC was hypothesized to be related to length scales of mass transfer, but the CC response is unrelated to DDMT.

Swanson, Ryan D.↗

Phase-field modeling of diffusional phase behaviors of solid surfaces: A case study of phase-separating Li X FePO 4 electrode particles

In this paper, we present a comprehensive phase-field model for simulating diffusion-mediated kinetic phase behaviors near the surface of a solid particle. The model incorporates elastic inhomogeneity and anisotropy, diffusion mobility anisotropy, interfacial energy anisotropy, and Cahn–Hilliard diffusion kinetics. The free energy density function is formulated based on the regular solution model taking into account the possible solute-surface interaction near the surface. The coherency strain energy is computed using the Fourier-spectral iterative-perturbation method due to the strong elastic inhomogeneity with a zero surface traction boundary condition. Employing a phase-separating Li X FePO 4 electrode particle for Li-ion batteries as a model system, we perform parametric three-dimensional computer simulations. The model permits the observation of surface phase behaviors that are different from the bulk counterpart. For instance, it reproduces the theoretically well-established surface modes of spinodal decomposition of an unstable solid solution: the surface mode of coherent spinodal decomposition and the surface-directed spinodal decomposition mode. We systematically investigate the influences of major factors on the kinetic surface phase behaviors during the diffusional process. Finally, our simulation study provides insights for tailoring the internal phase microstructure of a particle by controlling the surface phase morphology.

25 ENERGY STORAGE↗

Dislocation loop evolution in Kr-irradiated ThO 2

Here, the early stage of microstructural evolution of ThO 2 , under krypton irradiation at 600, 800, and 1000°C, was investigated using in situ transmission electron microscopy (TEM). Dislocation loops grew faster, whereas their number density decreased with increasing irradiation temperature. Loop density was found to decrease with ion dose. Interstitial dislocation loops, including Frank loops with Burgers vector of $\textit{a}/3\langle111\rangle$ and perfect loops with Burgers vector of $\textit{a}/2\langle110\rangle$, were determined by traditional TEM and atomic resolution–scanning TEM techniques. Atomistic and mesoscale level modeling are performed to interpret experimental observations. The migration energy barriers of defects in ThO 2 were calculated using density-functional theory. The energetics of different dislocation loop types were studied using molecular dynamics simulations. Loop density and diameter were analyzed using a kinetic rate theory model that considers stoichiometric loop evolution. This analysis reveals that loop growth is governed by the mobility of cation interstitials, whereas loop nucleation is determined by the mobility of anion defects. Lastly, a rate theory model was used to extract the diffusion coefficients of thorium interstitials, oxygen interstitials, and vacancies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Model-data Comparison of Stratospheric Intrusions Over Hampton, Virginia

Stratospheric intrusions are the transport of ozone from the stratosphere to the troposphere. These intrusions are frequent in spring; they can affect local air quality as well as satellites observations, notably limb sounding instruments such as SAGE III. Complex models such as GEOS-CF are used to assess the magnitude and the impact of SI. We present the model-data comparison of several stratospheric intrusion above Hampton, Virginia, in 2019, using the NASA Langley Mobile Ozone Lidar and the GEOS-CF model. We show the limits of the model-data agreement for these events and suggest a method to correct limb-sounding observations.

G. Gronoff↗

Machine learning surrogates for surface complexation model of uranium sorption to oxides

Abstract The safety assessments of the geological storage of spent nuclear fuel require understanding the underground radionuclide mobility in case of a leakage from multi-barrier canisters. Uranium, the most common radionuclide in non-reprocessed spent nuclear fuels, is immobile in reduced form (U(IV) and highly mobile in an oxidized state (U(VI)). The latter form is considered one of the most dangerous environmental threats in the safety assessments of spent nuclear fuel repositories. The sorption of uranium to mineral surfaces surrounding the repository limits their mobility. We quantify uranium sorption using surface complexation models (SCMs). Unfortunately, numerical SCM solvers often encounter convergence problems due to the complex nature of convoluted equations and correlations between model parameters. This study explored two machine learning surrogates for the 2-pK Triple Layer Model of uranium retention by oxide surfaces if released as U(IV) in the oxidizing conditions: random forest regressor and deep neural networks. Our surrogate models, particularly DNN, accurately reproduce SCM model predictions at a fraction of the computational cost without any convergence issues. The safety assessment of spent fuel repositories, specifically the migration of leaked radioactive waste, will benefit from having ultrafast AI/ML surrogates for the computationally expensive sorption models that can be easily incorporated into larger-scale contaminant migration models. One such model is presented here.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of Water on Molecular Mobility and Physical Stability of Amorphous Pharmaceuticals

In this work, we investigated the influence of sorbed water concentration on the molecular mobility and crystallization behavior in a model amorphous drug and a solid dispersion. The temperature scaling ($T_g/T$) allowed us to simultaneously evaluate the effects of water content and temperature on the relaxation time. In the supercooled dispersions, once scaled, the relaxation times of the systems with different water content overlapped. Thus, the observed increase in mobility could be explained by the “plasticization” effect of water. This effect also explained the decrease in crystallization onset temperature brought about by water. That is, plasticization is the underlying mechanism governing the observed increase in mobility and physical instability in the supercooled state. Similar results were observed in the glassy drug substance. A single linear relationship was observed between crystallization time (time for 0.5% crystallization) and $T_g/T$ in both dry and water containing systems. Since fragility is unaffected by modest amounts of water, much like crystallization time, the mobility in the glass is expected to scale with $T_g$.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Innovative mathematical modeling in environmental remediation

There are two different ways to model reactive transport: ad hoc and innovative reaction-based approaches. The former, such as the Kd simplification of adsorption, has been widely employed by practitioners, while the latter has been mainly used in scientific communities for elucidating mechanisms of biogeochemical transport processes. It is believed that innovative mechanistic-based models could serve as protocols for environmental remediation as well. This paper reviews the development of a mechanistically coupled fluid flow, thermal transport, hydrologic transport, and reactive biogeochemical model and example-applications to environmental remediation problems. Theoretical bases are sufficiently described. Four example problems previously carried out are used to demonstrate how numerical experimentation can be used to evaluate the feasibility of different remediation approaches. The first one involved the application of a 56-species uranium tailing problem to the Melton Branch Subwatershed at Oak Ridge National Laboratory (ORNL) using the parallel version of the model. Simulations were made to demonstrate the potential mobilization of uranium and other chelating agents in the proposed waste disposal site. The second problem simulated laboratory-scale system to investigate the role of natural attenuation in potential off-site migration of uranium from uranium mill tailings after restoration. It showed inadequacy of using a single Kd even for a homogeneous medium. The third example simulated laboratory experiments involving extremely high concentrations of uranium, technetium, aluminum, nitrate, and toxic metals (e.g.,Ni, Cr, Co).The fourth example modeled microbially-mediated immobilization of uranium in an unconfined aquifer using acetate amendment in a field-scale experiment. The purposes of these modeling studies were to simulate various mechanisms of mobilization and immobilization of radioactive wastes and to illustrate how to apply reactive transport models for environmental remediation.The second problem simulated laboratory-scale system to investigate the role of natural attenuation in potential off-site migration of uranium from uranium mill tailings after restoration. It showed inadequacy of using a single Kd even for a homogeneous medium.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High-Fidelity Modeling of Curbside Driving Behavior in SUMO: Preprint

Recent advances in mobility technologies have considerably increased the need for curbside use and congestion at curb-lanes. At airports and in dense urban centers, the growing adoption of Transportation Network Companies (TNCs), such as Uber and Lyft, has led to an increase in curbside traffic due to the reduction in the use public transit and other shared modes. In dense city areas, the curbside demand and congestion were further augmented by the growing use of e-commerce, which requires home-delivery of goods. To model vehicles' curbside interactions realistically, there is a need for high-fidelity simulation models that can represent the complex interplay of vehicles as they complete pick-up or drop-off trips. Vehicles' curbside behaviors are usually not modeled with high-fidelity in microscopic simulators such Simulation of Urban of Mobility (SUMO). This paper presents such a high-resolution model for vehicle curbside behavior in SUMO, using SUMO's Traci interface. Simulations results demonstrate that the improved curbside behavior captures vehicles' curbside maneuvering more accurately than the default SUMO curbside model, and increases the curbside utilization and capacity.

ADVANCED PROPULSION SYSTEMS↗

A reactive transport model to simulate uranium immobilization through pH manipulation

Saprolite cores collected from around the former S-3 Ponds waste disposal site on the Oak Ridge Reservation in east Tennessee, USA, exhibit low pH and high concentrations of Al, Ca, Mg, Mn, various trace metals such as Ni and Co, and radionuclides such as U and Tc. Because uranium is one of the major contaminants of concern at the site, its behavior was of particular interest. The mobility of uranium depends highly on pH. Groundwater titration experiments showed that when pH was increased from 3.87 to 5.45 with addition of dissolved sodium hydroxide, concentration of aqueous uranium decreased from 50 ppm to less than 5 ppm. However, base additions to the sediments to increase pH are strongly buffered by various precipitation and sorption reactions. This study was undertaken to investigate the geochemical processes that control contaminant mobility and to develop a practical model to predict uranium immobilization under conditions where pH is manipulated for remediation of geochemically complex sites. The method of Spalding and Spalding was utilized to model soil buffer capacity by treating aquifer solids as a polyprotic acid. Aluminum precipitation and dissolution kinetics was included in HydroGeoChem v5.0 in addition to an equilibrium reaction model that considers aqueous complexation, precipitation, sorption and soil buffering with pH-dependent ion exchange capacity. The HydroGeoChem model was successfully utilized to simulate batch titration experiments and comparison of reactive transport model results with pH manipulation column experiments were in close agreement. The model was also calibrated to simulate acidic groundwater percolating through carbonate gravel at the site.

54 ENVIRONMENTAL SCIENCES↗

Exploring Energy-Efficient and Sustainable Urban Mobility Strategies: An Initial Framework to Curate Data/Models, Measure Performance, and Diffuse Innovation: Preprint

Many cities across the United States seek to understand the maturity of data and models that are available to help manage challenges, opportunities, and uncertainties associated with the shifts in technologies, human behaviors and sustainable urban mobility strategies. One key question identified for smart city action planning includes how to best shape continuous improvements for urban populations at the intersection of mobility, energy, and quality of life? With the emerging megatrends of urbanization (more than 70% of world population in cities by 2050), on-demand shared mobility, vehicle electrification, and automated vehicles, initial 'urban science' studies to date have demonstrated the potential and need for maturing the related data and model ecosystems and on-going performance measurement across multiple urban system goals: e.g., from more mobility, clean and efficient energy use, accessibility and safety to less air pollution, traffic, and resource-intensive urban sprawl. To build on emerging literature and understand city responses to disruptive change, this initial study engages researchers and practitioners across four smart city finalists (Columbus, Denver, Austin and Portland) that competed in the U.S. Department of Transportation (DOT) Smart City Challenge. The initial results emphasize the need for a suite of datasets and diverse analytical approaches that support U.S. Department of Energy (DOE) relevant research with cities. Considering desirable energy and mobility outcomes as a first step to advancing smart city solutions strategies, we systematically review approaches of and shortcomings in four U.S. cities, and suggest improvements in three areas: measurement, modeling effectiveness of new mobility technologies, and data-driven governance.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Incorporation of measured photosynthetic rate in a mathematical model for calculation of non-structural saccharide concentration

A simple mathematical model for calculating the concentration of mobile carbon skeletons in the shoot of soya bean plants [Glycine max (L.) Merrill cv. Ransom] was built to examine the suitability of measured net photosynthetic rates (PN) for calculation of saccharide flux into the plant. The results suggest that either measurement of instantaneous PN overestimated saccharide influx or respiration rates utilized in the model were underestimated. If neither of these is the case, end-product inhibition of photosynthesis or waste respiration through the alternative pathway should be included in modelling of CH2O influx or efflux; and even if either of these is the case, the model output at a low coefficient of leaf activity indicates that PN still may be controlled by either end-product inhibition or alternative respiration.

NASA Program CELSS↗

Theory of silicon superlattices - Electronic structure and enhanced mobility

A realistic tight-binding band-structure model of silicon superlattices is formulated and used to study systems of potential applied interest, including periodic layered Si-Si(1-x)Ge(x) heterostructures. The results suggest a possible new mechanism for achieving enhanced transverse carrier mobility in such structures: reduced transverse conductivity effective masses associated with the superlattice band structure. For electrons in 100-line-oriented superlattices, a reduced conductivity mass arises intrinsically from the lower symmetry of the superlattice and its unique effect on the indirect bulk silicon band gap. An order of magnitude estimate of the range of mobility enhancement expected from this mechanism appears to be consistent with preliminary experimental results on Si-Si(1-x)Ge(x) superlattices.

Moriarty, J. A.↗

Thermally and field-driven mobility of emergent magnetic charges in square artificial spin ice

Designing and constructing model systems that embody the statistical mechanics of frustration is now possible using nanotechnology. We have arranged nanomagnets on a two-dimensional square lattice to form an artificial spin ice, and studied its fractional excitations, emergent magnetic monopoles, and how they respond to a driving field using X-ray magnetic microscopy. We observe a regime in which the monopole drift velocity is linear in field above a critical field for the onset of motion. The temperature dependence of the critical field can be described by introducing an interaction term into the Bean-Livingston model of field-assisted barrier hopping. By analogy with electrical charge drift motion, we define and measure a monopole mobility that is larger both for higher temperatures and stronger interactions between nanomagnets. The mobility in this linear regime is described by a creep model of zero-dimensional charges moving within a network of quasi-one-dimensional objects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Particle-in-cell simulations and passive bulk model of collisional capacitive discharge

Intermediate pressure (0.2–6.0 Torr), radio frequency capacitive discharges are of increasing importance in the thin film processing industry. However, existing low pressure (<0.1 Torr) discharge models are often used beyond their applicability in this pressure range. In this work, the authors performed one-dimensional particle-in-cell (PIC) simulations of a capacitive 2.5 cm gap argon discharge driven at 13.56 MHz with current density amplitude J 0 50 A/m 2 over a wide range of gas pressures p g = 0.04–20 Torr. For intermediate pressures, the PIC results showed that most of the ionization occurs near the plasma-sheath edges with very little occurring within the central bulk region. This led us to develop a “passive bulk” model of the discharge in which bulk electron heating does not contribute to ionization, and all the ionization is due solely to the sheath-heated electrons. The model assumes a constant ion-neutral mean free path λ i in the plasma bulk and either constant λ i or constant ion mobility μ i in the sheaths. The model is solved using an electron temperature iteration scheme. The PIC scalings of the discharge equilibrium parameters (e.g., electron density and temperature, sheath width, and voltage) with the input parameters p g and J 0 showed good agreement with those of the passive bulk model. A constant μ i sheath model showed the best agreement with the PIC results in the intermediate pressure regime of interest, but a constant λ i model is simpler to implement and showed reasonable agreement over a wide pressure range.

36 MATERIALS SCIENCE↗

Pathfinder Networks for Measuring Operator Mental Model Structure with a Simple Autopilot System

Pathfinder networks are a method to represent mental models from empirically generated pairwise relatedness ratings. This study examined the effects of training exposure on mental model structures based on relatedness ratings collected using the Target Rating method. Forty-eight participants read instruction slides with or without explicit information on the functionality of an autopilot system (Advanced Mental Model or Basic Mental Model groups, respectively). Participants provided relatedness ratings and completed a comprehension test. The Advanced Mental Model group had more common links with the expected model, higher within-group network similarity scores, and higher mental model assessment questionnaire scores than the Basic Mental Model group. Both groups had coherence scores above the minimum threshold for internal consistency. Pathfinder network analysis was sensitive to changes produced by a simple exposure training intervention. In practice, a simple training program may effectively influence operator mental models in novel technological environments such as Advanced Air Mobility.

Mental Models↗

Mobile Ion Concentration Measurement and Open-Access Band Diagram Simulation Platform for Halide Perovskite Solar Cells

We propose two approaches to compute the band diagram of highly efficient perovskite solar cells, both based on the migration of a single-mobile ion (halide vacancies). The first is a full analytical approach to quickly calculate the main features of the perovskite band diagram and easily extract the mobile vacancy concentration from experimental data. The second approach is an online-open-access platform that can be used by anyone to accurately simulate their own band diagram. We combine the first approach with current transient measurements to extract the mobile ion concentration for six different perovskite compositions - including perovskite solar cells with power conversion efficiencies exceeding 19%. For the devices measured herein, we obtain ion concentrations in the range 7 x 10 16 -5 x 10 17 cm -3 . We use the second approach to quantitatively discuss the implications of the mobile ion concentrations we measured in terms of device performance and stability.

14 SOLAR ENERGY↗

Characterizing dislocation configurations and their evolution during creep of a new 12% Cr steel

Highlights: • Applicability of different techniques to characterize particular dislocation configuration. • XRD models in combination with TEM and EBSD to measure the dislocation density. • Substructure evolution during creep of a new 12% Cr steel is discussed. - Abstract: In this research, different types of dislocations are characterized and quantified in a newly developed 12% Cr steel in as-received as well as in crept conditions. X-ray diffraction (XRD) patterns are analyzed using three different models. The dislocation densities are determined employing the Convolution Multiple Whole Profile (CMWP) fitting, the analysis of the asymptotic part of the X-ray line profile (Groma's method), and the Rietveld refinement coupling Popa's and Williamson-Smallman approaches. CMWP method is used to measure the internal dislocation density inside the subgrains consisting of mobile and dipole dislocations, and the results show good agreement with Transmission Electron Microscopy (TEM) measurements. Groma's method is used to evaluate the total dislocation density, with results comparable to those obtained from the combination of Electron Backscatter Diffraction (EBSD) and TEM. Rietveld method gives the internal dislocation density or mobile dislocation density depending on the model chosen. The experimentally determined results such as creep strain, dislocation densities and subgrain size are compared with theoretical predictions and they are found in good agreement.

36 MATERIALS SCIENCE↗

MEP Core Tools

This slide deck provides an update on the progress of the project titled "MEP Core Tools" funded by the Energy Efficient Mobility Systems program in the Vehicle Technologies Office at the Department of Energy.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗