Search NASA⌕ Search

SEARCH · Search NASA

Results for “multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Influence of surface topography on the multilayer film formation

The relationship between the topography of substrates and multilayer films deposited on these substrates (which are used in ring laser gyroscopes) has been investigated. The surfaces were studied by atomic-force microscopy. The statistical properties of the surface topography are analyzed within the approach based on a comparative analysis of the power spectral density functions of roughness calculated for the substrate and film. The degree of correlation between the substrate nanotopography and multilayer film is determined, and the influence of the substrate roughness on the optical characteristics of the deposited mirrors is established.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Soft X-ray microscopy in the spectral region of 'carbon window' with the use of multilayer optics and a laser-plasma source

This paper reports on the fabrication and testing of multilayer mirrors for X-ray optical systems operating in the 'carbon window' region (at wavelengths from 4.5 to 5.0 nm) and the results of their application in soft X-ray imaging of the internal structure of organic objects. The developed approaches to the fabrication and control of graded Co/C multilayer coatings have made it possible to create an X-ray multimirror system with a maximum known entrance aperture and throughput. The use of the developed high-spatial-resolution X-ray optics can significantly extend the field of practical application of soft X-ray absorption microscopy based on compact laser-plasma sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Symmetric multilayer megampere X-pinch

Raising the power of X-ray emission from an X-pinch by increasing the pinch current to the megampere level requires the corresponding increase in the initial linear mass of the load. This can be achieved by increasing either the number of wires or their diameter. In both cases, special measures should be undertaken to prevent the formation of a complicated configuration with an uncontrolled spatial structure in the region of wire crossing, because such a structure breaks the symmetry of the neck formed in the crossing region, destabilizes plasma formation, and degrades X-ray generation. To improve the symmetry of the wire crossing region, X-pinch configurations with a regular multilayer arrangement of wires in this region were proposed and implemented. The results of experiments with various symmetric X-pinch configurations on the COBRA facility at currents of {approx}1MA are presented. It is shown that an X-pinch with a symmetric crossing region consisting of several layers of wires made of different materials can be successfully used in megampere facilities. The most efficient combinations of wires in symmetric multilayer X-pinches are found in which only one hot spot forms and that are characterized by a high and stable soft X-ray yield.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-ray diffraction analysis and scanning micro-Raman spectroscopy of structural irregularities and strains deep inside the multilayered InGaN/GaN heterostructure

High-resolution X-ray diffraction analysis and scanning confocal Raman spectroscopy are used to study the spatial distribution of strains in the In{sub x}Ga{sub 1-x}N/GaN layers and structural quality of these layers in a multilayered light-emitting diode structure produced by metal-organic chemical vapor deposition onto (0001)-oriented sapphire substrates. It is shown that elastic strains almost completely relax at the heterointerface between the thick GaN buffer layer and In{sub x}Ga{sub 1-x}N/GaN buffer superlattice. It is established that the GaN layers in the superlattice are in a stretched state, whereas the alloy layers are in a compressed state. In magnitude, the stretching strains in the GaN layers are lower than the compressive strains in the InGaN layers. It is shown that, as compared to the buffer layers, the layers of the superlattice contain a smaller number of dislocations and the distribution of dislocations is more randomly disordered. In micro-Raman studies on scanning through the thickness of the multilayered structure, direct evidence is obtained for the asymmetric gradient distributions of strains and crystal imperfections of the epitaxial nitride layers along the direction of growth. It is shown that the emission intensity of the In{sub x}Ga{sub 1-x}N quantum well is considerably (more than 30 times) higher than the emission intensity of the GaN barrier layers, suggesting the high efficiency of trapping of charge carriers by the quantum well.

36 MATERIALS SCIENCE↗

Fabrication of a terahertz quantum-cascade laser with a double metal waveguide based on multilayer GaAs/AlGaAs heterostructures

The Postgrowth processing of GaAs/AlGaAs multilayer heterostructures for terahertz quantumcascade lasers (QCLs) are studied. This procedure includes the thermocompression bonding of In–Au multilayer heterostructures with a doped n{sup +}-GaAs substrate, mechanical grinding, and selective wet etching of the substrate, and dry etching of QCL ridge mesastripes through a Ti/Au metallization mask 50 and 100 μm wide. Reactive-ion-etching modes with an inductively coupled plasma source in a BCl{sub 3}/Ar gas mixture are selected to obtain vertical walls of the QCL ridge mesastripes with minimum Ti/Au mask sputtering.

36 MATERIALS SCIENCE↗

Strained multilayer structures with pseudomorphic GeSiSn layers

The temperature and composition dependences of the critical thickness of the 2D–3D transition for a GeSiSn film on Si(100) have been studied. The regularities of the formation of multilayer structures with pseudomorphic GeSiSn layers directly on a Si substrate, without relaxed buffer layers, were investigated for the first time. The possibility of forming multilayer structures based on pseudomorphic GeSiSn layers has been shown and the lattice parameters have been determined using transmission electron microscopy. The grown structures demonstrate photoluminescence for Sn contents from 3.5 to 5% in GeSiSn layers.

36 MATERIALS SCIENCE↗

Surface functionalization of single-layer and multilayer graphene upon ultraviolet irradiation

The process of oxidation of single-layer and multilayer graphene films upon ultraviolet irradiation of the structure in water vapor was studied. The systematic features and distinctions between changes in the topographic and optical properties of graphene films composed of different numbers of layers were established. The possibility of surface functionalization accompanied by modification of the energy structure of graphene was shown. Differences between single-layer and multilayer graphene films in the mechanisms of oxidation on ultraviolet irradiation are discussed and analyzed. Correlation of the topographic imperfections of the properties of the graphene material with its structural defects observed in Raman spectra was shown.

36 MATERIALS SCIENCE↗

Formation of silicon nanocrystals in multilayer nanoperiodic a-SiO{sub x}/insulator structures from the results of synchrotron investigations

The problem of the efficiency of the controllable formation of arrays of silicon nanoparticles is studied on the basis of detailed investigations of the electronic structure of multilayer nanoperiodic a-SiO{sub x}/SiO{sub 2}, a-SiO{sub x}/Al{sub 2}O{sub 3}, and a-SiO{sub x}/ZrO{sub 2} compounds. Using synchrotron radiation and the X-ray absorption near edge structure (XANES) spectroscopy technique, a modification is revealed for the investigated structures under the effect of high-temperature annealing at the highest temperature of 1100°C; this modification is attributed to the formation of silicon nanocrystals in the layers of photoluminescent multilayer structures.

36 MATERIALS SCIENCE↗

Crystallization of Amorphous Germanium Films and Multilayer a-Ge/a-Si Structures upon Exposure to Nanosecond Laser Radiation

The processes of the crystallization of amorphous germanium films and multilayer germanium/silicon structures upon exposure to nanosecond (70 ns) ruby laser radiation (λ = 694 nm) are studied. The samples are grown on silicon and glassy substrates by plasma-enhanced chemical vapor deposition. Pulsed laser annealing of the samples is conducted in the range of pulse energy densities E{sub p} from 0.07 to 0.8 J cm{sup –2}. The structure of the films after annealing is determined by analyzing the scanning electron microscopy data and Raman spectra. It is established that, after annealing, the films are completely crystallized and, in this case, contain regions of coarse crystalline grains (>100 nm), whose fraction increases, as E{sub p} is increased, and reaches 40% of the area. From analysis of the position of the Raman peaks, it is conceived that the crystalline grains, whose dimensions exceed 100 nm, either contain structural defects or stretching strains. The correlation length of optical vibrations is determined from the phonon confinement model and found to increase from 5 to 8 nm, as E{sub p} is increased. Pulsed laser annealing of multilayer Ge(10 nm)/Si(5 nm) structures induces partial intermixing of the layers with the formation of Ge–Si alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Features of Magnetorefractive Effect in a [CoFe/Cu]{sub n} Multilayer Metallic Nanostructure

The features of magnetorefractive effect (MRE) in metallic multilayer film Ni{sub 48}Fe{sub 12}Cr{sub 40}(50 Å)/[Co{sub 90}Fe{sub 10}(14 Å)/Cu(22 Å)]{sub 8}/Cr(20 Å) nanostructures, which exhibit giant magnetoresistance at room temperature, are investigated experimentally and theoretically. We show that the MRE in these structures reaches 1.5% in an applied magnetic field of 3.5 kOe, in a broad part of the IR region, and can change sign for both transmission and reflection of light. The refraction and extinction coefficients that are calculated for the nanostructures in an external magnetic field are in good agreement with our experimental data. The deduced formulas can be applied to estimating the MRE in multilayer metallic nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure and Mechanical Properties of Multilayer α-AlN/α-BCN Coating as Functions of the Current Density during Sputtering of a B{sub 4}C Target

Multilayer AlN/BCN coating of nanometer scale have been prepared by magnetron sputtering of Al and B{sub 4}C targets in an argon–nitrogen atmosphere during deposition on a Si substrate. These coating have an X-ray amorphous structure and the maximum Knoop hardness of 27 GPa (at the current density 100 mA). The first-principle molecular dynamics calculations show that the B4–BN layer is dynamically unstable; thus, it will not be epitaxial and will be amorphous or have a structure different from the B4–BN structure. The thermal vacuum annealing from 600 to 800°C of samples with multilayer nanosized coating leads to the decrease in the Knoop hardness to 18 GPa; however, the coating structure is retained X-ray amorphous.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Semiconductor Behavior and Room Temperature Ferromagnetism in e-Beam Evaporated Co/TiO{sub 2} Multilayer Thin Films

The Co/TiO{sub 2} multilayer thin films have been deposited by e-beam evaporation method on glass substrates in vacuum and annealed in air at 773 K for 1 h. The crystal structure, surface morphology, optical properties, electrical properties and magnetic properties of Co/TiO{sub 2} multilayer thin films have been systematically investigated. The results showed that the particle sizes were significantly reduced when the samples are annealed and the enlargement of particle size occurred when the samples thickness is increased. The spectroscopic analysis exhibited enhanced transmittance and higher optical band gap of annealed sample than the as-deposited one and it was decreased with sample thickness. The resistivity measurement confirmed resistivity decreament with temperature. Furthermore, by investigating the magnetic properties, room temperature ferromagnetism was observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multilayer Field Emitters Made of Contacting Hafnium and Platinum Nanolayers

Novel field emitters made of contacting hafnium and platinum layers have been studied. Calculations aimed at optimizing the characteristics of the multilayer emitters have been conducted. Field emission currents up to 2.0–2.5 mA at a (tentative) current density of up to 200 A/cm{sup 2} have been achieved. It has been shown that the field emission current can be significantly increased by summing current from several multilayer systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Thermal Annealing on the Properties of Multilayer Mo/Be Mirrors

The influence of thermal action on X-ray optics performance and structure of films and transition regions in multilayer Mo/Be mirrors optimized for a reflection maximum in the interval 11.2–11.4 nm at normal incidence has been considered. The annealing temperature reached 300°C and the annealing time was 1 and 4 h. It has been shown that after thermal annealing in vacuum for 1 h at 300°C, the reflection coefficient rises; however, when the annealing time grows to 4 h, it drops. Grains in molybdenum films become finer, and the profiles of transition regions change from exponential to linear. The period of multilayer mirrors has remained the same under all annealing conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Control over the Magnetic Properties of Co/Pt-based Multilayered Periodical Structures

The possibility of controlling the magnetic properties of multilayered periodical structures with perpendicular magnetic anisotropy, which are based on cobalt and platinum films, have been studied. The multilayered films composed by layers with a thickness of 0.5–1.0 nm were subjected to two types of actions: vacuum annealing at different temperatures and irradiation by helium ion beams. Transmission electron microscopy has shown that the irradiation by He{sup +} ions with energy of 30 keV leads to material mixing in the layers since at vacuum annealing the layered structure of films is kept. In this case, as a result of thermal annealing, the coercive force of the structure increases significantly, and upon irradiation with helium ions, the coercivity of the films decreases to a change in the type of anisotropy from perpendicular to “easy plane” anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Broadband extreme ultraviolet multilayer mirror for supercontinuum light at a photon energy of 35-65 eV

We have developed a broadband multilayer mirror for photon energies between 35 and 65 eV. This extreme ultraviolet (EUV) mirror has an almost flat reflectivity profile at normal incidence, and the average reflectivity is 8%. The bandwidth of this mirror is 30 eV centered around 50 eV, 1.5 times broader than conventional multilayer mirrors in this energy region. This new mirror can be used in a variety of applications using supercontinuum EUV light sources including attosecond metrology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical properties of boron carbide near the boron K edge evaluated by soft-x-ray reflectometry from a Ru/B4C multilayer

Soft-x-ray Bragg reflection from two Ru/B4C multilayers with 10 and 63 periods was used for independent determination of both real and imaginary parts of the refractive index n = 1 -{delta} + i{beta} close to the boron K edge ({approx}188 eV). Prior to soft x-ray measurements, the structural parameters of the multilayers were determined by x-ray reflectometry using hard x rays. For the 63-period sample, the optical properties based on the predictions made for elemental boron major deviations were found close to the K edge of boron for the 10-period sample explained by chemical bonding of boron to B4C and various boron oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray diffraction effect from surface acoustic waves traveling on a deposited multilayer

We investigate the x-ray diffraction effects from surface acoustic waves (SAW) traveling along a multilayer. The diffraction intensity distribution depends on the incidence angle and the multilayer SAW (MLSAW) amplitude. Particularly, a small departure deviating from the Bragg incidence angle at a certain amplitude will produce a larger variation of the intensity distribution. This shows that the diffraction intensity from MLSAW has an extremely high sensitivity to the Bragg incidence angle, which is different from a SAW traveling along a solid surface without deposited layers. By carefully analyzing the relationship between the intensity distribution I and the incidence angle {theta}, the corresponding analytic expression of the intensity distribution is theoretically derived. Our theoretical prediction is in great agreement with the experimental results previously obtained. A theoretical model that can be applied to study the x-ray diffraction effect from MLSAW is developed. The extremely high sensitivity to the Bragg angle will help us in acousto-optic instrument research with MLSAW.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗