Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiple precision”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Iterative map-making with two-level preconditioning for polarized cosmic microwave background data sets: A worked example for ground-based experiments

Context. An estimation of the sky signal from streams of time ordered data (TOD) acquired by the cosmic microwave background (CMB) experiments is one of the most important steps in the context of CMB data analysis referred to as the map-making problem. The continuously growing CMB data sets render the CMB map-making problem progressively more challenging in terms of computational cost and memory in particular in the context of ground-based experiments with their operational limitations as well as the presence of contaminants. Aims. We study a recently proposed, novel class of the Preconditioned Conjugate Gradient (PCG) solvers which invoke two-level preconditioners in the context of the ground-based CMB experiments. We compare them against the PCG solvers commonly used in the map-making context considering their precision and time-to-solution. Methods. We compare these new methods on realistic, simulated data sets reflecting the characteristics of current and forthcoming CMB ground-based experiments. We develop a divide-and-conquer implementation of the approach where each processor performs a sequential map-making for a subset of the TOD. Results. We find that considering the map level residuals, the new class of solvers permits us to achieve a tolerance that is better than the standard approach by up to three orders of magnitude, where the residual level often saturates before convergence is reached. This often corresponds to an important improvement in the precision of the recovered power spectra in particular on the largest angular scales. The new method also typically requires fewer iterations to reach a required precision and therefore shorter run times are required for a single map-making solution. However, the construction of an appropriate two-level preconditioner can be as costly as a single standard map-making run. Nevertheless, if the same problem needs to be solved multiple times, for example, as in Monte Carlo simulations, this cost is incurred only once, and the method should be competitive, not only as far as its precision is concerned but also its performance.

79 ASTRONOMY AND ASTROPHYSICS↗

Conceptual design of a multiple cable crane for planetary surface operations

A preliminary design study is presented of a mobile crane suitable for conducting remote, automated construction operations on planetary surfaces. A cursory study was made of earth based mobile cranes and the needs for major improvements were identified. Current earth based cranes have a single cable supporting the payload, and precision positioning is accomplished by the use of construction workers controlling the payload by the use of tethers. For remote, autonomous operations on planetary surfaces it will be necessary to perform the precision operations without the use of humans. To accomplish this the payload must be stabilized relative to the crane. One approach for accomplishing this is to suspend the payload on multiple cable. A 3-cable suspension system crane concept is discussed. An analysis of the natural frequency of the system is presented which verifies the legitimacy of the concept.

Mikulas, Martin M., Jr.↗

Highly efficient one-step scarless protein tagging by type IIS restriction endonuclease-mediated precision cloning

Protein tagging with a wide variety of epitopes and/or fusion partners is used routinely to dissect protein function molecularly. Frequently, the required DNA subcloning is inefficient, especially in cases where multiple constructs are desired for a given protein with unique tags. Additionally, the generated clones have unwanted junction sequences introduced. To add versatile tags into the extracellular domain of the transmembrane protein THSD1, we developed a protein tagging technique that utilizes non-classical type IIS restriction enzymes that recognize non-palindromic DNA sequences and cleave outside of their recognition sites. Our results demonstrate that this method is highly efficient and can precisely fuse any tag into any position of a protein in a scarless manner. Moreover, this method is cost-efficient and adaptable because it uses commercially available type IIS restriction enzymes and is compatible with the traditional cloning system used by many labs. Therefore, precision tagging technology will benefit a number of researchers by providing an alternate method to integrate an array of tags into protein expression constructs.

60 APPLIED LIFE SCIENCES↗

Measurement of the sodium and iodine scintillation quenching factors across multiple NaI(Tl) detectors to identify systematics

The amount of light produced by nuclear recoils in scintillating targets is strongly quenched compared to that produced by electrons. A precise understanding of the quenching factor is particularly interesting for weakly interacting massive particles (WIMP) searches and coherent elastic neutrino-nucleus scattering ( CE ν NS ) measurements since both rely on nuclear recoils, whereas energy calibrations are more readily accessible from electron recoils. There is a wide variation among the current measurements of the quenching factor in sodium iodide (NaI) crystals, especially below 10 keV, the energy region of interest for dark matter and CE ν NS studies. A better understanding of the quenching factor in NaI(Tl) is of particular interest for resolving the decades-old puzzle in the field of dark matter between the null results of most WIMP searches and the claim for dark matter detection by the DAMA/LIBRA collaboration. In this work, we measured sodium and iodine quenching factors for five small NaI(Tl) crystals grown with similar thallium concentrations and growth procedures. Unlike previous experiments, multiple crystals were tested, with measurements made in the same experimental setup to control systematic effects. The quenching factors agree in all crystals we investigated, and both sodium and iodine quenching factors are smaller than those reported by DAMA/LIBRA. The dominant systematic effect was due to the electron equivalent energy calibration originating from the nonproportional behavior of the NaI(Tl) light yield at lower energies, potentially the cause for the discrepancies among the previous measurements. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Automated Glovebox Work-cell Design - 18370

Los Alamos National Laboratory (LANL) is the primary plutonium science and manufacturing facility in the United States supporting multiple national security programs. It is responsible for completing a high variety of small-batch manufacturing tasks requiring the handling and precision machining of Special Nuclear Materials (SNM). Given the myriad of tasks that must be completed in a limited workspace, LANL intends to utilize flexible, multi-use robotic work-cells capable of completing a variety of mission critical tasks in a single glovebox with no re-tooling needed between batch jobs. This approach would allow LANL more flexibility in its production schedule and to meet its future production and research objectives. In this paper, we present a system that integrates multiple sensors and other manufacturing peripherals into existing glovebox infrastructure. Currently, a technician can place an object in the work area where vision sensors and supervisory software identify the object and its pose and automatically determine which manufacturing task to complete. Pose uncertainty is addressed in real-time by the task planner, eliminating the need for fixtures. Grasps are validated using pressure sensors, payload sensors, and grasp quality metrics to ensure that objects are not dropped or damaged during manipulation. The robot, sensors, and peripherals are controlled using open-source software built utilizing ROS (Robot Operating System), which minimizes redevelopment and allows for re-use and extensibility. Established capabilities support vision, collision-free path planning, and more, minimizing development time. For this effort, particular attention was given to the integration of general peripheral devices (drill, chuck, etc.), which is critical to efficiently utilizing ROS in manufacturing environments. This integration is achieved with an in-development framework that allows for quick integration of peripherals, including I/O devices and motors. Contact tasks utilize the Generalized Contact Control Framework (GCCF) previously developed at UT Austin. GCCF allows application developers to easily define multiple contact control tasks for a single robot. This paper summarizes the key software components necessary to develop the multi-use work-cell including existing ROS components. UT-developed software for grasp validation, peripheral integration, and contact control is presented in more depth. Finally the glovebox system is demonstrated completing a set of tasks with no fixturing necessary. Primary tasks include surface preparation/ablation, drilling, press-fitting, and sorting, as well as supporting material transfer and inspection tasks. The glovebox work-cell reduces cost, operator dose, ergonomic issues, and time loss due to material transfer between gloveboxes that only support one task. If multiple glovebox work-cells are in use, they have the potential to eliminate bottlenecks and scale production capabilities beyond current limits. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Bayesian analysis of the 86 Sr ⁢(𝛼,𝛼) reaction to constrain the 86 Sr ⁢(𝛼,𝑛) cross section at astrophysical energies

The alpha optical model potential (𝛼-OMP ) is a phenomenological approach used to describe elastic scattering where multiple reaction channels are open. It is one of the most critical inputs for the calculation of thermonuclear reaction rates in explosive stellar environments, but uncertainties within the 𝛼-OMP lead to imprecise predictions hindering comparisons between calculations and observations. In order to improve the precision of the 𝛼-OMP, additional nuclear physics data are required. In this paper, a measurement of the 86 Sr (𝛼, 𝛼) elastic scattering cross section at multiple energies is reported. Here, a local optical potential is constructed via a fully Bayesian analysis of the elastic scattering data. The resulting uncertainties on the low-energy cross sections relevant to nuclear astrophysics are then calculated and shown to be on the order of 50%.

59 ≤ A ≤ 89↗

Nonexistence of a universal quantum machine to examine the precision of unknown quantum states

In this work, we reveal a type of impossibility discovered in our recent research which forbids comparing the closeness of multiple unknown quantum states with any nontrivial threshold in a perfect or unambiguous way. This impossibility is distinct from the existing impossibilities in that it is a ''collective'' impossibility on multiple quantum states; most other ''no-go'' theorems are concerned with only one single state each time, i.e., it is an impossibility on a nonlocal quantum operation. This impossibility may provide new insight into the nature of quantum mechanics, and it implies more limitations on quantum information tasks than the existing no-go theorems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dissecting Tensor Cores via Microbenchmarks: Latency, Throughput and Numeric Behaviors

Tensor Cores have been an important unit to accelerate Fused Matrix Multiplication Accumulation (MMA) in all NVIDIA GPUs since Volta Architecture. To program Tensor Cores, users have to use either legacy wmma APIs or current mma APIs. Legacy wmma APIs are more easy-to-use but can only exploit limited features and power of Tensor Cores. Specifically, wmma APIs support fewer operand shapes and can not leverage the new sparse matrix multiplication feature of the newest Ampere Tensor Cores. However, the performance of current programming interface has not been well explored. Furthermore, the computation numeric behaviors of low-precision floating points (TF32, BF16, and FP16) supported by the newest Ampere Tensor Cores are also mysterious. In this paper, we explore the throughput and latency of current programming APIs. Further, we intuitively study the numeric behaviors of Tensor Cores MMA and profile the intermediate operations including multiplication, addition of inner product, and accumulation. All codes used in this work can be found in https://github.com/sunlex0717/DissectingTensorCores.

97 MATHEMATICS AND COMPUTING↗

Sample-Clock Phase-Control Feedback

To demodulate a communication signal, a receiver must recover and synchronize to the symbol timing of a received waveform. In a system that utilizes digital sampling, the fidelity of synchronization is limited by the time between the symbol boundary and closest sample time location. To reduce this error, one typically uses a sample clock in excess of the symbol rate in order to provide multiple samples per symbol, thereby lowering the error limit to a fraction of a symbol time. For systems with a large modulation bandwidth, the required sample clock rate is prohibitive due to current technological barriers and processing complexity. With precise control of the phase of the sample clock, one can sample the received signal at times arbitrarily close to the symbol boundary, thus obviating the need, from a synchronization perspective, for multiple samples per symbol. Sample-clock phase-control feedback was developed for use in the demodulation of an optical communication signal, where multi-GHz modulation bandwidths would require prohibitively large sample clock frequencies for rates in excess of the symbol rate. A custom mixedsignal (RF/digital) offset phase-locked loop circuit was developed to control the phase of the 6.4-GHz clock that samples the photon-counting detector output. The offset phase-locked loop is driven by a feedback mechanism that continuously corrects for variation in the symbol time due to motion between the transmitter and receiver as well as oscillator instability. This innovation will allow significant improvements in receiver throughput; for example, the throughput of a pulse-position modulation (PPM) with 16 slots can increase from 188 Mb/s to 1.5 Gb/s.

Quirk, Kevin J.↗

The Mn-53-Cr-53 System in CAIs: An Update

High precision techniques have been developed for the measurement of Cr isotopes on the Triton mass spectrometer, at JPL. It is clear that multiple Faraday cup, simultaneous ion collection may reduce the uncertainty of isotope ratios relative to single Faraday cup ion collection, by the elimination of uncertainties from ion beam instabilities (since ion beam intensities for single cup collection are interpolated in time to calculate isotope ratios), and due to a greatly increased data collection duty cycle, for simultaneous ion collection. Efforts to measure Cr by simultaneous ion collection have not been successful in the past. Determinations on Cr-50-54Cr, by simultaneous ion collection on the Finnigan/ MAT 262 instrument at Caltech, resulted in large variations in extrinsic precision, for normal Cr, of up to 1% in Cr-53/Cr-52 (data corrected for mass fractionation, using Cr-50/Cr-52).

Papanastassiou, D. A.↗

Cost and Time Effective Lithography of Reusable Millimeter Size Bone Tissue Replicas With Sub‐15 nm Feature Size on A Biocompatible Polymer

Abstract The ability to replicate the microenvironment of biological tissues creates unique biomedical possibilities for stem cell applications. Current fabrication methods are limited by either the control on feature size and shape, or by the throughput and size of the replicas. Here, a novel platform is reported that combines thermal scanning probe lithography (tSPL) with innovative methodologies for the low‐cost and high‐throughput nanofabrication of large area quasi‐3D bone tissue replicas with high fidelity, sub‐15 nm lateral precision, and sub‐2 nm vertical resolution. This bio‐tSPL platform features a biocompatible polymer resist that withstands multiple cell culture cycles, allowing the reuse of the replicas, further decreasing costs and fabrication times. The as‐fabricated replicas support the culture and proliferation of human induced mesenchymal stem cells, which display broad therapeutic and biomedical potential. Furthermore, it is demonstrated that bio‐tSPL can be used to nanopattern the bone tissue replicas with amine groups, for subsequent tissue‐mimetic biofunctionalization. The achieved level of time and cost‐effectiveness, as well as the cell compatibility of the replicas, make bio‐tSPL a promising platform for the production of tissue‐mimetic replicas to study stem cell‐tissue microenvironment interactions, test drugs, and ultimately harness the regenerative capacity of stem cells and tissues for biomedical applications.

Liu, Xiangyu↗

Complementing Nanoscale Galvanic Exchange with Redox Manipulation toward Architectural Control of Multimetallic Hollow Nanostructures

Galvanic exchange occurring within the confinement by nanoparticulate templates provides a unique pathway to controllably transform solid metallic nanoparticles into architecturally more sophisticated multimetallic hollow nanostructures under facile reaction conditions. As such, in this Minireview, we elaborately discuss how the nanoparticle-templated galvanic exchange can be deliberately coupled with redox manipulation to synthesize a large library of complex multimetallic hollow nanostructures exhibiting precisely tailored architectures and compositions, with a particular emphasis on important mechanistic insights concerning the dynamic interplay among multiple structure-remodeling processes that synergistically dictate the versatile nanoparticle transforming behaviors during kinetically and regioselectively modulated galvanic exchange reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electric field effects on current–voltage relationships in microfluidic channels presenting multiple working electrodes in the weak-coupling limit

While electrochemical methods are well suited for lab-on-a-chip applications, reliably coupling multiple, electrode-controlled processes in a single microfluidic channel remains a considerable challenge, because the electric fields driving electrokinetic flow make it difficult to establish a precisely known potential at the working electrode(s). The challenge of coupling electrochemical detection with microchip electrophoresis is well known; however, the problem is general, arising in other multielectrode arrangements with applications in enhanced detection and chemical processing. Here, we study the effects of induced electric fields on voltammetric behavior in a microchannel containing multiple in-channel electrodes, using a Fe(CN) 6 3/4- model system. When an electric field is induced by applying a cathodic potential at one inchannel electrode, the half-wave potential (E 1/2 ) for the oxidation of ferrocyanide at an adjacent electrode shifts to more negative potentials. The E 1/2 value depends linearly on the electric field current at a separate in-channel electrode. The observed shift in E 1/2 is quantitatively described by a model, which accounts for the change in solution potential caused by the iR drop along the length of the microchannel. The model, which reliably captures changes in electrode location and solution conductivity, apportions the electric field potential between iR drop and electrochemical potential components, enabling the study of microchannel electric field magnitudes at low applied potentials. In the system studied, the iR component of the electric field potential increases exponentially with applied current before reaching an asymptotic value near 80 % of the total applied potential. The methods described will aid in the development and interpretation of future microchip electrochemistry methods, particularly those that benefit from the coupling of electrokinetic and electrochemical phenomena at low voltages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Quantum-Confined Borophene Nanoribbons

Here, borophene nanoribbons (BNRs) are one-dimensional strips of atomically thin boron expected to exhibit quantum-confined electronic properties that are not present in extended two-dimensional borophene. While the parent material borophene has been experimentally shown to possess anisotropic metallicity and diverse polymorphic structures, the atomically precise synthesis of nanometer-wide BNRs has not yet been achieved. Here, we demonstrate the synthesis of multiple BNR polymorphs with well-defined edge configurations within the nanometer-scale terraces of vicinal Ag(977). Through atomic-scale imaging, spectroscopy, and first-principles calculations, the synthesized BNR polymorphs are characterized and found to possess distinct edge structures and electronic properties. For single-phase BNRs, v 1/6 -BNRs and v 1/5 -BNRs adopt reconstructed armchair edges and sawtooth edges, respectively. In addition, the electronic properties of single-phase v 1/6 -BNRs and v 1/5 -BNRs are dominated by Friedel oscillations and striped moiré patterns, respectively. On the other hand, mixed-phase BNRs possess quantum-confined states with increasing nodes in the electronic density of states at elevated biases. Overall, the high degree of polymorphism and diverse edge topologies in borophene nanoribbons provide a rich quantum platform for studying one-dimensional electronic states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of Distorted Gamma-Ray Signature Patterns Using Digital Filtering and Auto-Associative Memory Implemented with a Hopfield Neural Network

The detection and identification of radioactive sources in search applications involve analyzing passive gamma-ray emissions from high-level radioactive materials. This process uses a mobile detector-spectrometer in a complex field test environment. Recently, the use of artificial intelligence for gamma-ray spectrum analysis has shown promising results. However, challenges persist in identifying isotopic signatures from spectral measurements that may be distorted due to source shielding, random variations in natural radioactive background, or insufficient measurement time to obtain clear spectral lines. Here, this paper presents a novel intelligent signature recognition method that combines digital filtering techniques with an artificial Hopfield Neural Network (HNN). The HNN leverages auto-associative memory to store training sample patterns and match them with incoming gamma spectra from distorted sources. It restores the testing sources’ measurements by finding the closest matching signature patterns in the spectral library. Before HNN recognition, the measured spectrum undergoes preprocessing with a digital image filter to reduce fluctuations. Performance of the proposed method is evaluated using a set of gamma-ray spectra measured with a sodium iodide detector. The data collected include measurements from six pure samples: 241 Am, 60 Co, 137 Cs, 192 Ir, 239 Pu, and 235 U, which are used for training and validation (i.e. six cases). Additionally, the data set contains 24 distorted synthesized sources with various fluctuating backgrounds. Test results demonstrate the potential of the proposed method to accurately recognize the correct isotope with high precision, achieving an accuracy rate exceeding 85%. Furthermore, the proposed method exhibits superior performance compared to the conventional multiple regression fitting and simple feedforward neural network methods.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SUBMILLIMETER SOURCES BEHIND THE MASSIVE LENSING CLUSTERS A370 AND A2390

We report 850 {mu}m Submillimeter Array (SMA) observations of four gravitationally lensed submillimeter galaxies (SMGs), A370-2, A2390-1, A2390-3, and A2390-4, which were originally discovered with the Submillimeter Common-User Bolometer Array (SCUBA). Our SMA detection of A370-2 with a submillimeter flux of 7.95 {+-} 0.60 mJy unambiguously identifies the counterparts to this source at optical and radio wavelengths. A2390-1 is an ultraluminous infrared galaxy with a submillimeter flux of 5.55 {+-} 0.92 mJy and a redshift of 1.8 {+-} 0.2 computed from submillimeter/radio flux ratio analysis. We resolve A2390-3 into two components, A2390-3a and A2390-3b, with fluxes of 3.15 {+-} 0.63 mJy and 1.92 {+-} 0.60 mJy, respectively. The structure of the system could be consistent with morphological distortion by gravitational lensing. The lack of counterparts in the optical and infrared indicates a heavily dust-enshrouded nature, and a non-detection in the radio implies that these two sources probably lie at z > 4.7, which would make them among the most distant SMGs known to date. Our non-detection of A2390-4 suggests either that there are multiple fainter submillimeter sources within the SCUBA beam or that the SCUBA detection may have been false. Our precise positions allow us to determine accurate amplifications and fluxes for all of our detected sources. Our new results give a shallower power-law fit (-1.10) to the faint-end 850 {mu}m cumulative number counts than previous work. We emphasize the need for high-resolution observations of single dish detected SMGs in order to measure accurately the faint end of the 850 {mu}m counts.

79 ASTRONOMY AND ASTROPHYSICS↗

Removing Atmospheric Fringes from Zwicky Transient Facility i-band Images using Principal Component Analysis

The Zwicky Transient Facility is a time-domain optical survey that has substantially increased our ability to observe and construct massive catalogs of astronomical objects by use of its 47 square degree camera that can observe in multiple filters. However the telescope’s i-band filter suffers from significant atmospheric fringes that reduce photometric precision, especially for faint sources and in multi-epoch co-additions. Here we present a method for constructing models of these atmospheric fringes using Principal Component Analysis that can be used to identify and remove these artifacts from contaminated images. In addition, we present the Uniform Background Indicator as a quantitative measurement of the reduced correlated background noise and photometric error present after removing fringes. We conclude by evaluating the effect of our method on measuring faint sources through the injection and recovery of artificial stars in both single-image epochs and co-additions. Our method for constructing atmospheric fringe models and applying those models to produce cleaned images is available for public download in the open source Python package fringez.

79 ASTRONOMY AND ASTROPHYSICS↗