Search NASA⌕ Search

SEARCH · Search NASA

Results for “parallel simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Explicit structure-preserving geometric particle-in-cell algorithm in curvilinear orthogonal coordinate systems and its applications to whole-device 6D kinetic simulations of tokamak physics

Explicit structure-preserving geometric particle-in-cell (PIC) algorithm in curvilinear orthogonal coordinate systems is developed. The work reported represents a further development of the structure-preserving geometric PIC algorithm achieving the goal of practical applications in magnetic fusion research. The algorithm is constructed by discretizing the field theory for the system of charged particles and electromagnetic field using Whitney forms, discrete exterior calculus, and explicit non-canonical symplectic integration. In addition to the truncated infinitely dimensional symplectic structure, the algorithm preserves exactly many important physical symmetries and conservation laws, such as local energy conservation, gauge symmetry and the corresponding local charge conservation. As a result, the algorithm possesses the long-term accuracy and fidelity required for first-principles-based simulations of the multiscale tokamak physics. The algorithm has been implemented in the SymPIC code, which is designed for high-efficiency massively-parallel PIC simulations in modern clusters. The code has been applied to carry out whole-device 6D kinetic simulation studies of tokamak physics. A self-consistent kinetic steady state for fusion plasma in the tokamak geometry is numerically found with a predominately diagonal and anisotropic pressure tensor. The state also admits a steady-state sub-sonic ion flow in the range of 10 km s -1 , agreeing with experimental observations and analytical calculations Kinetic ballooning instability in the self-consistent kinetic steady state is simulated. It is shown that high-n ballooning modes have larger growth rates than low-n global modes, and in the nonlinear phase the modes saturate approximately in 5 ion transit times at the 2% level by the E × B flow generated by the instability. These results are consistent with early and recent electromagnetic gyrokinetic simulations.

43 PARTICLE ACCELERATORS↗

Efficient Parallel Algorithm For Direct Numerical Simulation of Turbulent Flows

A distributed algorithm for a high-order-accurate finite-difference approach to the direct numerical simulation (DNS) of transition and turbulence in compressible flows is described. This work has two major objectives. The first objective is to demonstrate that parallel and distributed-memory machines can be successfully and efficiently used to solve computationally intensive and input/output intensive algorithms of the DNS class. The second objective is to show that the computational complexity involved in solving the tridiagonal systems inherent in the DNS algorithm can be reduced by algorithm innovations that obviate the need to use a parallelized tridiagonal solver.

Moitra, Stuti↗

Parallel point defect identification in molecular dynamics simulations without post-processing: A compute and dump style for LAMMPS

Two classes for the molecular dynamics program LAMMPS – one compute style and one dump style – are presented that are designed to identify, count, and output point defects in cascade damage and related molecular dynamics simulations. The calculations are done in parallel across multiple MPI processes, and can be done at the same time as the original simulation. This drastically reduces storage requirements by eliminating the need to post-process every atom in the system. Non-cubic lattices, free surfaces, and large voids can be eliminated from the output by suitable choices of the reference lattice. The classes are derived from LAMMPS’s Dump and Compute classes, and pose no additional overhead to LAMMPS if they are not used.

42 ENGINEERING↗

Gyro-fluid and two-fluid theory and simulations of edge-localized-modes

This paper reports on the theoretical and simulation results of a gyro-Landau-fluid extension of the BOUT++ code, which contributes to increasing the physics understanding of edge-localized-modes (ELMs). Large ELMs with low-to-intermediate-n peeling-ballooning (P-B) modes are significantly suppressed due to finite Larmor radius (FLR) effects when the ion temperature increases. For type-I ELMs, it is found from linear simulations that retaining complete first order FLR corrections as resulting from the incomplete “gyroviscous cancellation” in Braginskii's two-fluid model is necessary to obtain good agreement with gyro-fluid results for high ion temperature cases (T{sub i}≽3 keV) when the ion density has a strong radial variation, which goes beyond the simple local model of ion diamagnetic stabilization of ideal ballooning modes. The maximum growth rate is inversely proportional to T{sub i} because the FLR effect is proportional to T{sub i}. The FLR effect is also proportional to toroidal mode number n, so for high n cases, the P-B mode is stabilized by FLR effects. Nonlinear gyro-fluid simulations show results that are similar to those from the two-fluid model, namely that the P-B modes trigger magnetic reconnection, which drives the collapse of the pedestal pressure. Due to the additional FLR-corrected nonlinear E × B convection of the ion gyro-center density, for a ballooning-dominated equilibrium the gyro-fluid model further limits the radial spreading of ELMs. In six-field two fluid simulations, the parallel thermal diffusivity is found to prevent the ELM encroachment further into core plasmas and therefore leads to steady state L-mode profiles. The simulation results show that most energy is lost via ion channel during an ELM event, followed by particle loss and electron energy loss. Because edge plasmas have significant spatial inhomogeneities and complicated boundary conditions, we have developed a fast non-Fourier method for the computation of Landau-fluid closure terms based on an accurate and tunable approximation. The accuracy and the fast computational scaling of the method have been demonstrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Computational composite mechanics for aerospace propulsion structures

Specialty methods are presented for the computational simulation of specific composite behavior. These methods encompass all aspects of composite mechanics, impact, progressive fracture and component specific simulation. Some of these methods are structured to computationally simulate, in parallel, the composite behavior and history from the initial fabrication through several missions and even to fracture. Select methods and typical results obtained from such simulations are described in detail in order to demonstrate the effectiveness of computationally simulating (1) complex composite structural behavior in general and (2) specific aerospace propulsion structural components in particular.

Chamis, C. C.↗

Computational composite mechanics for aerospace propulsion structures

Specialty methods are presented for the computational simulation of specific composite behavior. These methods encompass all aspects of composite mechanics, impact, progressive fracture and component specific simulation. Some of these methods are structured to computationally simulate, in parallel, the composite behavior and history from the initial frabrication through several missions and even to fracture. Select methods and typical results obtained from such simulations are described in detail in order to demonstrate the effectiveness of computationally simulating: (1) complex composite structural behavior in general, and (2) specific aerospace propulsion structural components in particular.

Chamis, Christos C.↗

ViennaX: a parallel plugin execution framework for scientific computing

We present the free open source plugin execution framework ViennaX for modularizing and parallelizing scientific simulations. In general, functionality is abstracted by the notion of a task, which is implemented as a plugin. The plugin system facilitates the utilization of both, already available functionality as well as new implementations. Each task can define arbitrary data dependencies which are used by ViennaX to build a task graph. The framework supports the execution of this dependence graph based on the message passing interface in either a serial or a parallel fashion. The applied modular approach allows for defining highly flexible simulations, as plugins can be easily exchanged. The framework's general design as well as implementation details are discussed. Applications based on the Mandelbrot set and the solution of a partial differential equation are investigated, and performance results are shown.

Weinbub, Josef↗

Magneto-Hydrodynamic Modeling in the Design and Interpretation of Wire Array Z-pinches

Magneto-hydrodynamic simulations provide a powerful tool for improving our understanding of the complex physical processes underlying the behavior of wire array Z-pinches. We show how, by using large scale parallel 3D simulations of the array as a whole, it is possible to encompass all of the important features of the wire ablation, implosion and stagnation phases and to observe how these phenomena control the X-ray pulse that is achieved. Comparison of code results with experimental data from the 'Z' and MAGPIE pulsed power generators is shown to provide a detailed benchmark test for the models. The simulation results are also used to highlight key areas for future research.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The July climate and a comparison of the January and July climates simulated by the GISS general circulation model

Results are presented for a study directed to evaluate the ability of the global general circulation model of the Goddard Institute for Space Studies (GISS) in simulating seasonal differences as related to an experiment simulating the July climatology which parallels the January simulation presented by Somerville et al. (1974). The July and January simulations are compared with each other and with climatological data on seasonal changes, mainly for the Northern Hemisphere troposphere. The comparison shows that the model-generated energy cycle, distribution of winds, temperature, humidity and pressure, dynamical transports, diabatic heating, evaporation, precipitation and cloud cover are all realistic for the Northern Hemisphere troposphere in July. The model's simulation of seasonal differences is generally quite realistic since the systematic quantitative errors do not affect the simulation of relative changes, to first order. Defects that could seriously bias the model's performance in particular climate experiments are identified and discussed.

Stone, P. H.↗

Mesoscale Simulations of Particulate Flows with Parallel Distributed Lagrange Multiplier Technique

Fluid particulate flows are common phenomena in nature and industry. Modeling of such flows at micro and macro levels as well establishing relationships between these approaches are needed to understand properties of the particulate matter. We propose a computational technique based on the direct numerical simulation of the particulate flows. The numerical method is based on the distributed Lagrange multiplier technique following the ideas of Glowinski et al. (1999). Each particle is explicitly resolved on an Eulerian grid as a separate domain, using solid volume fractions. The fluid equations are solved through the entire computational domain, however, Lagrange multiplier constrains are applied inside the particle domain such that the fluid within any volume associated with a solid particle moves as an incompressible rigid body. Mutual forces for the fluid-particle interactions are internal to the system. Particles interact with the fluid via fluid dynamic equations, resulting in implicit fluid-rigid-body coupling relations that produce realistic fluid flow around the particles (i.e., no-slip boundary conditions). The particle-particle interactions are implemented using explicit force-displacement interactions for frictional inelastic particles similar to the DEM method of Cundall et al. (1979) with some modifications using a volume of an overlapping region as an input to the contact forces. The method is flexible enough to handle arbitrary particle shapes and size distributions. A parallel implementation of the method is based on the SAMRAI (Structured Adaptive Mesh Refinement Application Infrastructure) library, which allows handling of large amounts of rigid particles and enables local grid refinement. Accuracy and convergence of the presented method has been tested against known solutions for a falling sphere as well as by examining fluid flows through stationary particle beds (periodic and cubic packing). To evaluate code performance and validate particle contact physics algorithm, we performed simulations of a representative experiment conducted at the University of California at Berkley for pebble flow through a narrow opening.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Parallel Algorithms and Software for Nuclear, Energy, and Environmental Applications. Part II: Multiphysics Software

This paper is the second part of a two part sequence on multiphysics algorithms and software. The first [1] focused on the algorithms; this part treats the multiphysics software framework and applications based on it. Tight coupling is typically designed into the analysis application at inception, as such an application is strongly tied to a composite nonlinear solver that arrives at the final solution by treating all equations simultaneously. The application must also take care to minimize both time and space error between the physics, particularly if more than one mesh representation is needed in the solution process. This paper presents an application framework that was specifically designed to support tightly coupled multiphysics analysis. The Multiphysics Object Oriented Simulation Environment (MOOSE) is based on the Jacobian-free Newton-Krylov (JFNK) method combined with physics-based preconditioning to provide the underlying mathematical structure for applications. The report concludes with the presentation of a host of nuclear, energy, and environmental applications that demonstrate the efficacy of the approach and the utility of a well-designed multiphysics framework.

97 MATHEMATICS AND COMPUTING↗

A massively-parallel, unstructured overset method to simulate moving bodies in turbulent flows

An unstructured overset method capable of performing direct numerical simulation (DNS) and large eddy simulation (LES) of many (O(10 5 )) moving bodies, utilizing many computational cores (O(10 5 )), in turbulent, incompressible fluid flow is presented. Unstructured meshes are attached to bodies and placed within a fixed background domain. Body meshes are allowed to arbitrarily overlap and move throughout the domain. Within each mesh a high resolution, unstructured, non-dissipative finite volume method is used to solve for the flow field. Boundary conditions for each mesh are provided by interpolation from flow solutions on overlapping meshes. When many unstructured meshes of different resolution overlap, care is required in the connection between the different flow solutions. An interpolant is created which seeks to preserve volume conservation of flow quantities between meshes regardless of overlapping mesh differences. An implicit fractional step method is used for time advancement, requiring the calculation of a predicted fluid velocity and corrector pressure field. For the predictor step, the resulting interpolation is directly introduced into the implicit equations for the predicted flow field. For the corrected pressure field, the continuity between meshes is weakly enforced using a penalty formulation. The pressure formulation is symmetric, positive-definite and non-singular resulting in a formulation which is readily solvable using traditional iterative matrix inversion techniques. An Arbitrary Euler-Lagrangian (ALE) method coupled to a 6 degrees of freedom rigid body equation system (6-DOF) is used for body motion. For rotation, a quaternion representation is used to solve Euler's equations of rigid body motion. A linear spring damper model, which uses geometry information readily available from the overset assembly process, is used for collisions. Validation of the method for canonical flow fields is presented including assessment of order of accuracy and kinetic energy conservation properties. Particle-resolved direct numerical simulation (PR-DNS) of single particles in various flow fields are presented for validation. PR-DNS results of 50,000 spherical particles freely moving within turbulent channel flow are shown as a demonstration of the method at full scale. LES results of a marine propeller under crashback conditions are shown to demonstrate the ability to simulate highly unsteady turbulent flows over complex, moving geometries.

97 MATHEMATICS AND COMPUTING↗

A ROS-based Simulator for Testing the Enhanced Autonomous Navigation of the Mars 2020 Rover

In order to achieve the ambitious objectives of the Mars 2020 (M2020) mission, in particular the ability to autonomously traverse more challenging terrains more efficiently, new surface mobility software was developed for Enhanced Navigation (ENav). That decision was made early in the project, before most of the new surface flight software (FSW) existed, which created a need for a separate framework where the new navigation algorithms could be quickly prototyped and tested, before more realistic FSW-based testbeds became available. The JPL robotics team chose the Robot Operating System [1] (ROS) as the environment in which to test the new ENav algorithms. This made it possible to write the algorithms in the C language required by the FSW, so they could be directly ported over to the flight module later on, while leveraging all the C++ libraries and tools provided by ROS for simulation and testing. The ENav algorithms were developed as a separate C library, and stubs were used to replace any FSW-specific code, such as Event Reporting (EVRs) and data products (DPs). A ROS simulator was developed to generate a rich set of varied 3D terrains representative of the candidate Mars landing sites and simulate the physics of the rover motion, the point cloud perceived by the rover’s stereo vision system, and the new thinking-while-driving (TWD) navigation logic which directs the rover to drive autonomously to user-specified waypoints. To simulate the rover motion and perception, a ROS node was developed that uses a software library called HyperDrive Sim (HDSim), which is a wrapper for the Rover Sequencing and Visualization Program [2] (RSVP). That library provides roverterrain settling, realistic slip modelling, and camera rendering capability based on the rover’s NavCam machine vision models. To simulate the navigation logic, a ROS node was created that initializes and runs the ENav algorithms in a way that mimics the FSW execution, while also providing the capability to load and replay data products, including re-running the recorded inputs through the ENav algorithms for testing. An engineering Graphical User Interface (GUI) was also developed to visualize various elements, such as the rover pose during the drive, the simulated and perceived terrain, the selected local and global paths to the goal, the evaluated candidate paths and the reasons why they were rejected, the keep-in and keep-out zones (KIOZs), etc. Finally, an advanced Monte Carlo (MC) framework that can run many simulations in parallel on the Cloud and automatically generate reports that capture the key ENav performance metrics was developed to evaluate the system in a statisticallymeaningful way. This paper provides an overview of the ROSbased simulator used for testing the M2020 ENav algorithms.

Toupet, Olivier↗

THE ACCELERATION OF THERMAL PROTONS AT PARALLEL COLLISIONLESS SHOCKS: THREE-DIMENSIONAL HYBRID SIMULATIONS

We present three-dimensional hybrid simulations of collisionless shocks that propagate parallel to the background magnetic field to study the acceleration of protons that forms a high-energy tail on the distribution. We focus on the initial acceleration of thermal protons and compare it with results from one-dimensional simulations. We find that for both one- and three-dimensional simulations, particles that end up in the high-energy tail of the distribution later in the simulation gained their initial energy right at the shock. This confirms previous results but is the first to demonstrate this using fully three-dimensional fields. The result is not consistent with the ''thermal leakage'' model. We also show that the gyrocenters of protons in the three-dimensional simulation can drift away from the magnetic field lines on which they started due to the removal of ignorable coordinates that exist in one- and two-dimensional simulations. Our study clarifies the injection problem for diffusive shock acceleration.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling of Transient Flow Mixing of Streams Injected into a Mixing Chamber

Ignition is recognized as one the critical drivers in the reliability of multiple-start rocket engines. Residual combustion products from previous engine operation can condense on valves and related structures thereby creating difficulties for subsequent starting procedures. Alternative ignition methods that require fewer valves can mitigate the valve reliability problem, but require improved understanding of the spatial and temporal propellant distribution in the pre-ignition chamber. Current design tools based mainly on one-dimensional analysis and empirical models cannot predict local details of the injection and ignition processes. The goal of this work is to evaluate the capability of the modern computational fluid dynamics (CFD) tools in predicting the transient flow mixing in pre-ignition environment by comparing the results with the experimental data. This study is a part of a program to improve analytical methods and methodologies to analyze reliability and durability of combustion devices. In the present paper we describe a series of detailed computational simulations of the unsteady mixing events as the cold propellants are first introduced into the chamber as a first step in providing this necessary environmental description. The present computational modeling represents a complement to parallel experimental simulations' and includes comparisons with experimental results from that effort. A large number of rocket engine ignition studies has been previously reported. Here we limit our discussion to the work discussed in Refs. 2, 3 and 4 which is both similar to and different from the present approach. The similarities arise from the fact that both efforts involve detailed experimental/computational simulations of the ignition problem. The differences arise from the underlying philosophy of the two endeavors. The approach in Refs. 2 to 4 is a classical ignition study in which the focus is on the response of a propellant mixture to an ignition source, with emphasis on the level of energy needed for ignition and the ensuing flame propagation issues. Our focus in the present paper is on identifying the unsteady mixing processes that provide the propellant mixture in which the ignition source is to be placed. In particular, we wish to characterize the spatial and temporal mixture distribution with a view toward identifying preferred spatial and temporal locations for the ignition source. As such, the present work is limited to cold flow (pre-ignition) conditions

Voytovych, Dmytro M.↗

Feasibility of using the Massively Parallel Processor for large eddy simulations and other Computational Fluid Dynamics applications

The results of an investigation into the feasibility of using the MPP for direct and large eddy simulations of the Navier-Stokes equations is presented. A major part of this study was devoted to the implementation of two of the standard numerical algorithms for CFD. These implementations were not run on the Massively Parallel Processor (MPP) since the machine delivered to NASA Goddard does not have sufficient capacity. Instead, a detailed implementation plan was designed and from these were derived estimates of the time and space requirements of the algorithms on a suitably configured MPP. In addition, other issues related to the practical implementation of these algorithms on an MPP-like architecture were considered; namely, adaptive grid generation, zonal boundary conditions, the table lookup problem, and the software interface. Performance estimates show that the architectural components of the MPP, the Staging Memory and the Array Unit, appear to be well suited to the numerical algorithms of CFD. This combined with the prospect of building a faster and larger MMP-like machine holds the promise of achieving sustained gigaflop rates that are required for the numerical simulations in CFD.

Bruno, John↗